Dear experts. Help me please with this request.

I'm generating a report in dev6i.
the following query does not work correctly. and also fetch data with (+) outer join.

Select i.itemcode, sum (gs.approved) - sum (iss.issuedqty)
ims_itemcode i, ims_issues iss, ims_grns gs
where i.itemcode = gs.itemcode and gs.itemcode = iss.itemcode (+) of the i.itemcode group.

but I have to join two tables over (ims_issuem, ims_grnm)
After the addition of these two tables, the query will be

Select i.itemcode, sum (gs.approved) - sum (iss.issuedqty)
ims_itemcode i, ims_issues iss, gs ims_grns, im ims_issuem, gm ims_grnm
where i.itemcode = gs.itemcode and gs.itemcode = iss.itemcode (+) and gm.grnmserial = gs.grnsserial and
Group im.issuemserial = Iss.issuesserial by i.itemcode;

now the query works, but isn't going to pick up the results with outer (+) join. It takes only the results that correspond to the tables, but I want the results as well as the outer (+) join.
What is the problem in the second request help please.

You must add more join.

Try this...

select i.itemcode,sum(gs.approved)-sum(iss.issuedqty)
from ims_itemcode i,ims_issues iss, ims_grns gs, ims_issuem im, ims_grnm gm
where i.itemcode=gs.itemcode (+)
and gs.itemcode=iss.itemcode(+)
and gm.grnmserial(+)=gs.grnsserial
 and im.issuemserial(+)=iss.issuesserial
group by i.itemcode;

If not work, try something. After your first request. Add a table and check if need to add outer join.

Hope this helps

Hamid

Tags: Oracle Development

Similar Questions

Help me please with this code

Hello

It is the first program that I tried to write alone... and I'm stuck. I am trying to acquire data from a scope. I want the vi to load only the first field of application preparation time, the code is executed. Once the installation has been loaded, I want just the vi in order to reset the scope in order to acquire more data. I tried the first call, structures of the case,... all I can think about, but when I continually run the vi, it still loops and reloads the configuration every time. I have attached a picture of the code vi and describes the area of the code in question. The case structure is programmed to initialize the scope for open communications, then erase all existing data, and then call a program of specific scope to true. Wrong, I want only this setting of the code to initialize the communication within reach yet reminiscent of the configuration. A professional can explain it please how I'm supposed to accomplish this. Thank you

If you use RUN continuously to keep something running, you are indeed pushing the button RUN every time it stops, the function PREMI¨¨RE will return TRUE every time.

There are ways to do exactly what you're asking, but you are better off looking at the heart of your question:

You need a loop.

Put a loop around the part you want to do on several occasions.

Create a STOP button to stop the loop.

Make your INIT orders only once outside of the loop and make sure that the INIT part something happening in the WHILE loop

(to make sure that the loop starts after INIT).

Can someone help with this request please

I have a table something like below

Things_t
Characteristic of things float value
Element 1 red color
1 packaging
Point 2 square shape
Point 2 brand Spunk

Now I want to reterive an element with any of its tank as Null values. Using the query 'select distinct things from things_t, where there is no char value' fetch element 1 also with point 2. I want to retrieve a record of the thing for which none of the tank, the values are Null as point 2. Can you please help me with this request.

Try this:

WITH t AS
(SELECT 1 item_id, 17436 chr_id, 14225034 chr_val_id FROM dual UNION
 SELECT 1 item_id, 39 chr_id, 14276173 chr_val_id FROM dual UNION
 SELECT 1 item_id, 17774 chr_id, NULL chr_val_id FROM dual UNION
 SELECT 1 item_id, 265 chr_id, 20502978 chr_val_id FROM dual UNION
 SELECT 1 item_id, 16978 chr_id, 797233 chr_val_id FROM dual UNION
 SELECT 1 item_id, 13092 chr_id, 5666917 chr_val_id FROM dual UNION
 SELECT 1 item_id, 15228 chr_id, 1209758 chr_val_id FROM dual UNION
 SELECT 2 item_id, 112 chr_id,  12705342 chr_val_id FROM dual UNION
 SELECT 2 item_id, 6945 chr_id, NULL chr_val_id FROM dual UNION
 SELECT 2 item_id, 70 chr_id, 12597376 chr_val_id FROM dual UNION
 SELECT 2 item_id, 16832 chr_id, NULL chr_val_id FROM dual UNION
 SELECT 2 item_id, 7886 chr_id, 9588619 chr_val_id FROM dual UNION
 SELECT 2 item_id, 6986 chr_id, 2659351 chr_val_id FROM dual UNION
 SELECT 3 item_id, 9531 chr_id, 8910943 chr_val_id FROM dual UNION
 SELECT 3 item_id, 9798 chr_id, 8717531 chr_val_id FROM dual UNION
 SELECT 3 item_id, 17446 chr_id, 12266441 chr_val_id FROM dual UNION
 SELECT 3 item_id, 4830 chr_id, 13683090 chr_val_id FROM dual UNION
 SELECT 3 item_id, 9518 chr_id, 834772 chr_val_id FROM dual UNION
 SELECT 3 item_id, 11031 chr_id, 20233753 chr_val_id FROM dual UNION
 SELECT 3 item_id, 12564 chr_id, 2282478 chr_val_id FROM dual)
SELECT DISTINCT item_id
FROM   t
MINUS
SELECT DISTINCT item_id
FROM   t
WHERE  chr_val_id IS NULL

Or this:

SELECT item_id
FROM  (SELECT   item_id,
                MIN(NVL(chr_val_id, -1)) min_chr_val_id
       FROM     t
       GROUP BY item_id)
WHERE  min_chr_val_id != -1

Published by: lee200 on October 15, 2012 09:22

Hi, I've been a user of Club Photo Dollar. I accepted the proposal to continue with 10 dollars a month for 10 photos with this request: AD006115173PT, but still no response. Can help you pls?

Hi, I've been a user of Club Photo Dollar. I accepted the proposal to continue with 10 dollars a month for 10 photos with this request: AD006115173PT, but still no response. Can help you pls?

Hi Luis

I understand that your initial order for the promotion of CPD Stock has failed and you are looking for re - order.

I'm looking into that for you and will let you know when we have a solution.

Kind regards

Bev

I'm getting ready to order to fill through Adobe Reader, I have a special price (if you buy a product cost $11 characters of the same product will cost $9 could help me please to this)

I'm getting ready to order to fill through Adobe Reader, I have a special price (if you buy a product cost $11 characters of the same product will cost $9 could help me please to this)

So let's say that the quantity field is called 'Quantity' and the total field is called 'Total '.

You can use this code as the calculation for Total custom script:
```
var quantity = Number(this.getField("Quantity").value);
if (quantity<=1) event.value = quantity*11;
else event.value = 11 + (quantity-1)*9;
```
PS. I'm moving this question on the forum of PDF forms

Help me please with admob?

Hello Help me please with admob ? How intergate admob on adobe flash cs can someone help me please?

Your questions seems to have nothing to do with AdMob. Start a new thread with your question here: Adobe animate Ad development

Help, had fights with this sql for a day now

Grateful if someone could give me a pointer here. fighting with this thing for a day and can't do things.

Have 2 tables
tbl_ate_jun & tbl_pd_jun
the two paintings by xt

This is creates it for everyone.

CREATE TABLE "ME"."TBL_PD_JUN"
  (
    "ID"                  VARCHAR2(500 BYTE),
    "PROJECT_NUMBER"      VARCHAR2(500 BYTE),
    "PROJECT_NAME"        VARCHAR2(500 BYTE),
    "DESCRIPTION"         VARCHAR2(500 BYTE),
    "PROJECT_TYPE"        VARCHAR2(500 BYTE),
    "ORGANIZATIONAL_NAME" VARCHAR2(500 BYTE),
    "CUSTOMER_NAME"       VARCHAR2(500 BYTE),
    "OFFICE_FSR"          VARCHAR2(500 BYTE),
    "PROGRAMS_FSR"        VARCHAR2(500 BYTE)
  )
  ORGANIZATION EXTERNAL
  (
    TYPE ORACLE_LOADER DEFAULT DIRECTORY "XE_FTP" ACCESS PARAMETERS ( records delimited BY newline skip 0 fields terminated BY ',' OPTIONALLY ENCLOSED BY '"' MISSING FIELD VALUES ARE NULL ) LOCATION ( 'tbl_pd_jun.csv' )
  ) ;

CREATE TABLE "ME"."TBL_ATE_JUN"
  (
    "ID"                        VARCHAR2(500 BYTE),
    "PERSON_SSO"                VARCHAR2(500 BYTE),
    "FIRST_NAME"                VARCHAR2(500 BYTE),
    "LAST_NAME"                 VARCHAR2(500 BYTE),
    "VOUCHER_HOURS"             VARCHAR2(500 BYTE),
    "FISCAL_YEAR_WEEK"          VARCHAR2(500 BYTE),
    "ORG_TIER2_NAME"            VARCHAR2(500 BYTE),
    "ORG_TIER3_NAME"            VARCHAR2(500 BYTE),
    "VOUCHER_REASON"            VARCHAR2(500 BYTE),
    "VOUCHERING_STATUS"         VARCHAR2(500 BYTE),
    "ORG_TIER4_NAME"            VARCHAR2(500 BYTE),
    "TIER4_MANAGER_NAME"        VARCHAR2(500 BYTE),
    "VOUCHER_CODE"              VARCHAR2(500 BYTE),
    "VOUCHER_DESCRIPTION"       VARCHAR2(500 BYTE),
    "PERSON_COUNT"              VARCHAR2(500 BYTE),
    "HOUR_TYPE"                 VARCHAR2(500 BYTE),
    "APPLIED_FLAG"              VARCHAR2(500 BYTE),
    "COST_CENTER_CODE"          VARCHAR2(500 BYTE),
    "VOUCHER_CLASS"             VARCHAR2(500 BYTE),
    "VOUCHER_CLASS_DESCRIPTION" VARCHAR2(500 BYTE),
    "VOUCHER_SUB_CLASS"         VARCHAR2(500 BYTE),
    "PROGRAM_TYPE"              VARCHAR2(500 BYTE),
    "PAYCODE_NAME"              VARCHAR2(500 BYTE),
    "PAY_CODE"                  VARCHAR2(500 BYTE)
  )
  ORGANIZATION EXTERNAL
  (
    TYPE ORACLE_LOADER DEFAULT DIRECTORY "XE_FTP" ACCESS PARAMETERS ( records delimited BY newline skip 0 fields terminated BY ',' OPTIONALLY ENCLOSED BY '"' MISSING FIELD VALUES ARE NULL ) LOCATION ( 'tbl_ate_jun.csv' )
  ) ;

Basically, in tbl_ate_jun, it has all the user ID (person_sso)
Im trying to generate a report that contains all person_sso numbers in the first column.
Second column have applied_hours, then office_hours, then programs_hours, then total_hours, then diff_hours (difference).

Here's the code so far, but I just cant get, it is true, that it shows never all of the sso, each select individually works very well, but may not be combined, does not work well.

select a.person_sso,NVL(sum(b.applied_hours),0),NVL(sum(c.office_hours),0),NVL(sum(d.programs_hours),0),NVL(sum(e.total_hours),0),NVL(sum(f.diff_hours),0) 
from 

tbl_ate_jun a,

(SELECT
tbl_ate_jun.person_sso as applied_sso,
tbl_ate_jun.Voucher_Hours as applied_hours
FROM
tbl_pd_jun,
tbl_ate_jun 
WHERE
tbl_ate_jun.voucher_code IN (select project_number from tbl_pd_jun
where Office_FSR IS NULL AND Programs_FSR IS NULL)
and tbl_ate_jun.voucher_code=tbl_pd_jun.project_number
)b,


(SELECT
tbl_ate_jun.person_sso as office_sso,
tbl_ate_jun.Voucher_Hours as office_hours
FROM
tbl_pd_jun,
tbl_ate_jun
WHERE
tbl_pd_jun.Project_Number=tbl_ate_jun.Voucher_Code AND tbl_pd_jun.Office_FSR = 'Y' 
)c,

(SELECT
tbl_ate_jun.person_sso as programs_sso,
tbl_ate_jun.Voucher_Hours as programs_hours
FROM
tbl_pd_jun,
tbl_ate_jun
WHERE
tbl_pd_jun.Project_Number=tbl_ate_jun.Voucher_Code AND tbl_pd_jun.Programs_FSR = 'Y'  
)d,

(SELECT
tbl_ate_jun.person_sso as total_sso,
tbl_ate_jun.Voucher_Hours as total_hours
from
tbl_ate_jun 
)e,


(SELECT
tbl_ate_jun.person_sso as diff_sso,
tbl_ate_jun.Voucher_Hours as diff_hours
from
tbl_ate_jun
WHERE voucher_code NOT IN (select project_number from tbl_pd_jun)
)f


where
a.person_sso=b.applied_sso
and a.person_sso=c.office_sso
and a.person_sso=d.programs_sso
and a.person_sso=e.total_sso
and a.person_sso=f.diff_sso

group by a.person_sso

Help, please. not every column is filled with a sum of data, some would be empty if it applies to the sso.

Published by: Jay on August 10, 2011 07:45

not every column is filled with a sum of data, some would be empty if it applies to the sso.

You will probably need to OUTER JOIN then...
http://download.Oracle.com/docs/CD/B28359_01/server.111/b28286/queries006.htm#sthref3295
http://www.Oracle-base.com/articles/9i/ANSIISOSQLSupport.php#outer_join

Please help me with this request - I'm trying with Dense rank

version 10g

I got a quote for an account. If the same quote is received under different account I should mark the old account has received as being deleted.
Please help me.

/* Formatted on 2010/06/28 14:13 (Formatter Plus v4.8.8) */
WITH temp AS
     (SELECT '1-11TWQL' quote_id, 'COPS' ACCOUNT, 'Ordered' status,
             TO_DATE ('12/23/2009 3:37:54',
                      'mm/dd/yyyy hh:mi:ss PM'
                     ) captured_date
        FROM DUAL
      UNION ALL
      SELECT '1-11TWQL', 'COPS', 'RFS',
             TO_DATE ('12/23/2009 3:37:50', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-11TWQL', 'COPS', 'Rejected',
             TO_DATE ('12/23/2009 3:37:52', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-11TWQL', 'COPS', 'Validated',
             TO_DATE ('12/23/2009 3:37:51', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-11TWQL', 'D1', 'Ordered',
             TO_DATE ('12/23/2009 3:04:24', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-11TWQL', 'D1', 'RFS',
             TO_DATE ('12/23/2009 3:04:23', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-11TWQL', 'D1', 'Rejected',
             TO_DATE ('12/23/2009 3:04:22', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-11TWQL', 'D1', 'Validated',
             TO_DATE ('12/23/2009 3:04:23', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'RFS',
             TO_DATE ('3/5/2010 12:04:24', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'RFS',
             TO_DATE ('3/16/2010 7:55:50', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'RFS',
             TO_DATE ('3/16/2010 7:55:51', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'Rejected',
             TO_DATE ('3/5/2010 12:04:24', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'Rejected',
             TO_DATE ('3/16/2010 7:55:50', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'Rejected',
             TO_DATE ('3/16/2010 7:55:51', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'Validated',
             TO_DATE ('12/23/2009 3:37:54', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'Validated',
             TO_DATE ('12/23/2009 3:37:54', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'Validated',
             TO_DATE ('12/23/2009 3:37:54', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'D1', 'Ordered',
             TO_DATE ('3/26/2010 12:32:27', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'D1', 'Ordered',
             TO_DATE ('3/26/2010 12:32:27', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'D1', 'RFS',
             TO_DATE ('3/26/2010 12:32:27', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'D1', 'RFS',
             TO_DATE ('3/26/2010 12:32:27', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'D1', 'Validated',
             TO_DATE ('3/26/2010 12:32:27', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'D1', 'Validated',
             TO_DATE ('3/26/2010 12:32:27', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-249A8Z', 'COPS', 'Validated',
             TO_DATE ('3/26/2010 12:32:27', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL
      UNION ALL
      SELECT '1-249A8Z', 'COPS', 'Ordered',
             TO_DATE ('3/26/2010 12:32:27', 'mm/dd/yyyy hh:mi:ss PM')
        FROM DUAL)
SELECT   quote_id, ACCOUNT, status, captured_date,
         DENSE_RANK () OVER (PARTITION BY quote_id ORDER BY quote_id,
          ACCOUNT) rn
--         ,CASE DENSE_RANK () OVER (PARTITION BY quote_id ORDER BY quote_id,
--              ACCOUNT)
--            WHEN 1
--               THEN 'Y'
--            ELSE 'N'
--         END deleted_flag
    FROM temp
ORDER BY quote_id, captured_date;

power required

WITH temp AS
     (SELECT '1-11TWQL' quote_id, 'COPS' ACCOUNT, 'Ordered' status,
             TO_DATE ('12/23/2009 3:37:54',
                      'mm/dd/yyyy hh:mi:ss PM'
                     ) captured_date, 'N' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-11TWQL', 'COPS', 'RFS',
             TO_DATE ('12/23/2009 3:37:50', 'mm/dd/yyyy hh:mi:ss PM'), 'N' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-11TWQL', 'COPS', 'Rejected',
             TO_DATE ('12/23/2009 3:37:52', 'mm/dd/yyyy hh:mi:ss PM'), 'N' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-11TWQL', 'COPS', 'Validated',
             TO_DATE ('12/23/2009 3:37:51', 'mm/dd/yyyy hh:mi:ss PM'), 'N' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-11TWQL', 'D1', 'Ordered',
             TO_DATE ('12/23/2009 3:04:24', 'mm/dd/yyyy hh:mi:ss PM'), 'Y' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-11TWQL', 'D1', 'RFS',
             TO_DATE ('12/23/2009 3:04:23', 'mm/dd/yyyy hh:mi:ss PM'), 'Y' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-11TWQL', 'D1', 'Rejected',
             TO_DATE ('12/23/2009 3:04:22', 'mm/dd/yyyy hh:mi:ss PM'), 'Y' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-11TWQL', 'D1', 'Validated',
             TO_DATE ('12/23/2009 3:04:23', 'mm/dd/yyyy hh:mi:ss PM'), 'Y' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'RFS',
             TO_DATE ('3/5/2010 12:04:24', 'mm/dd/yyyy hh:mi:ss PM'), 'Y' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'RFS',
             TO_DATE ('3/16/2010 7:55:50', 'mm/dd/yyyy hh:mi:ss PM'), 'Y' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'RFS',
             TO_DATE ('3/16/2010 7:55:51', 'mm/dd/yyyy hh:mi:ss PM'), 'Y' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'Rejected',
             TO_DATE ('3/5/2010 12:04:24', 'mm/dd/yyyy hh:mi:ss PM'), 'Y' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'Rejected',
             TO_DATE ('3/16/2010 7:55:50', 'mm/dd/yyyy hh:mi:ss PM'), 'Y' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'Rejected',
             TO_DATE ('3/16/2010 7:55:51', 'mm/dd/yyyy hh:mi:ss PM'), 'Y' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'Validated',
             TO_DATE ('12/23/2009 3:37:54', 'mm/dd/yyyy hh:mi:ss PM'), 'Y' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'Validated',
             TO_DATE ('12/23/2009 3:37:54', 'mm/dd/yyyy hh:mi:ss PM'), 'Y' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'COPS', 'Validated',
             TO_DATE ('12/23/2009 3:37:54', 'mm/dd/yyyy hh:mi:ss PM'), 'Y' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'D1', 'Ordered',
             TO_DATE ('3/26/2010 12:32:27', 'mm/dd/yyyy hh:mi:ss PM'), 'N' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'D1', 'Ordered',
             TO_DATE ('3/26/2010 12:32:27', 'mm/dd/yyyy hh:mi:ss PM'), 'N' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'D1', 'RFS',
             TO_DATE ('3/26/2010 12:32:27', 'mm/dd/yyyy hh:mi:ss PM'), 'N' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'D1', 'RFS',
             TO_DATE ('3/26/2010 12:32:27', 'mm/dd/yyyy hh:mi:ss PM'), 'N' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'D1', 'Validated',
             TO_DATE ('3/26/2010 12:32:27', 'mm/dd/yyyy hh:mi:ss PM'), 'N' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-249A8X', 'D1', 'Validated',
             TO_DATE ('3/26/2010 12:32:27', 'mm/dd/yyyy hh:mi:ss PM'), 'N' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-249A8Z', 'COPS', 'Validated',
             TO_DATE ('3/26/2010 12:32:27', 'mm/dd/yyyy hh:mi:ss PM'), 'N' deleted_flag
        FROM DUAL
      UNION ALL
      SELECT '1-249A8Z', 'COPS', 'Ordered',
             TO_DATE ('3/26/2010 12:32:27', 'mm/dd/yyyy hh:mi:ss PM'), 'N' deleted_flag
        FROM DUAL)
SELECT   quote_id, ACCOUNT, status, captured_date, deleted_flag
    FROM temp
ORDER BY quote_id, captured_date;

This gives a shot:

SELECT quote_id
     , account
     , status
     , captured_date
     , CASE
            WHEN account_cnt  = 1
              OR account     != first_account
            THEN 'N'
            ELSE 'Y'
       END                                     AS deleted_flag
FROM
(
  SELECT quote_id
       , account
       , status
       , captured_date
       , FIRST_VALUE(account) OVER (PARTITION BY quote_id ORDER BY captured_date) AS first_account
       , COUNT(DISTINCT account) OVER (PARTITION BY quote_id) AS account_cnt
  FROM   temp
)
ORDER BY quote_id, captured_date;

What is the problem with this request - need help
Requirement: need to get the names of the employees who were hired Tuesday it must use the function to_char

Select ename
WCP
where to_char (hiredate, 'day') = "Tuesday";

When I run the query
o/p is without selected lines

Help, please.

Thanks in advance.
Hello

861173 wrote:
Requirement: need to get the names of the employees who were hired Tuesday it must use the function to_char

Select ename
WCP
where to_char (hiredate, 'day') = "Tuesday";

When I run the query
o/p is without selected lines

Try:
```
WHERE   TO_CHAR (hiredate, 'fmday')  = 'tuesday'
```
Without "FM" in the 2nd argument, TO_CHAR pads the results to make a uniform length. If your NLS_DATE_LANGUAGE = ENGLISH, which means it will always return a string of 9 characters, as the longest name in English ("Wednesday") has 9 letters. "FM" (case-insernsitive) tells TO_CHAR does not add this kind of padding.

Office showing "restore my active desktop". can someone help me please in this

Hello people,

I'm getting "restore my active desktop" in my office. Please help me how to get out of there.

Best regards

Manjunath Jayaram

Hello

1. what happens when you restore active desktop?

2. do you get an error message?

3 did you changes to the computer, before the show?

Consult the answers provided by RyanT - Support Engineer (October 20, 2009) and NightHawk02 (July 27, 2011) in the following link.

http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-desktop/Windows-XP-will-not-restore-my-Active-Desktop/f664bfe4-0acd-4B11-8918-eb779bb2cc07

Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

How to back up and restore the registry in Windows

Help needed please with microsoft Outlook 2007 electronic mail from hyperlinks

Hi all
I hope someone can help me... When I get an email and then, I want to see his online link I tinkle on the email and then get a warning box of Microsoft office outlook saying "this operation has been cancelled due to restrictions in effect on this computor. Please contact your system administrator. "with an ok... as I am the only person using this pc, and it's me who is the administrator what should I do to change the settings. I'm not aware of changing any setting make this happen... Please help frustrated Vista home Premium 64-bit edition user.
p.s all worked fine until recently I do not know what as it happened

Hi all
I hope someone can help me... When I get an email and then, I want to see his online link I tinkle on the email and then get a warning box of Microsoft office outlook saying "this operation has been cancelled due to restrictions in effect on this computor. Please contact your system administrator. "with an ok... as I am the only person using this pc, and it's me who is the administrator what should I do to change the settings. I'm not aware of changing any setting make this happen... Please help frustrated Vista home Premium 64-bit edition user.
p.s all worked fine until recently I do not know what as it happened

just found the solution to my problem follow the instructions in this link
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/8815ad6c-0f44-477a-9ffa-beb98109b5a6
Thank you

BlackBerry Smartphones can someone help me please with my TORCH 9800?

Hello

First off, I want to say thanks to anyone who takes the time to even post a reply. I'm new to blackberry, well I've had my blackberry for a little over a month now. The problem is that when I open google to search for something sometimes my results are like black or like this->______with a few pieces of the resuklts appear. Even when I click on a results page will appear with some information but then half blacnk. This is the second time that this has happened the first time it happened wasacouple weeks and it was fixed once I turnedit off then turn it back on. Ive fact that now, but there is still no positive result. Please help me!

Hiya!
So the question is with the rendering browser Google search results only? You have any problems by manually typing in a URL Pointant to any page?
Also, go ahead and remove the battery with the phone, leave it for a while and reinsert. Try now

Can anyone help me please with the installation of Adobe Premiere.

Hello guys, I am under a processor windows 7 64 bit home premium 2.00 ghz pentium b940 sandybridge. 500 GB hard drive, 4 GB of ram and I have tried install a trial version of adobe for 2 DAYS first! I am getting very frustrated. Please help me. I'll post the below error code. Please give DETAILED instructions on how to solve this problem and what goes wrong. Please, this has been very frustrating,
Exit code: 7

-------------------------------------- Summary --------------------------------------

-0 fatal Error, error 67 (s), 70 warning (s)
WARNING: DW065: display the requirements not met for {0497EAED-70DA-4BBE-BEB3-AF77FD8788EA}

WARNING: DW065: display the requirements not met for {5D2A85AB-7391-4EAC-AA61-D5D9C09E4F17}

WARNING: DW065: display the requirements not met for {3D51982E-45C6-4B4B-9362-B356E1610821}

WARNING: DW065: display the requirements not met for {FB720658-01F4-4002-BB69-49E66CD82E30}

WARNING: DW065: display the requirements not met for {BF093B6B-F94F-4D77-99C9-4C0F6B2F44B6}

WARNING: DW065: display the requirements not met for {CE45CAE5-0B56-4C52-AE07-98A05027A049}

WARNING: DW065: display the requirements not met for {FE35B66A-C8F1-4D62-B823-C2EE2C7DA702}

-Payload: {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 1.0.0.0.

ERROR: Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X80071A91.

ERROR: Install payload MSI failed with the error: - 1603 Fatal error during installation.
MSI error message: Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X80071A91.

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
ERROR: DW050: the following payload errors were found during the installation:

ERROR: DW050:-Adobe ExtendScript Toolkit CS5.5: installation failed

ERROR: DW050:-Microsoft_VC90_ATL_x86: installation failed

ERROR: DW050:-Adobe Premiere Pro CS5.5 family: installation failed

ERROR: DW050:-Microsoft_VC90_CRT_x86: installation failed

ERROR: DW050:-Support for Adobe Premiere Pro CS5.5: installation failed

ERROR: DW050:-Microsoft_VC80_ATL_x86: installation failed

ERROR: DW050:-Installation of fonts common x 64 recommended: installation failed

ERROR: DW050:-AdobePDFL x 64 CS5: installation failed

ERROR: DW050:-DynamiclinkSupport: installation failed

ERROR: DW050:-Microsoft_VC80_MFCLOC_x86_x64: installation failed

ERROR: DW050:-Adobe XMP panels CS5: installation failed

ERROR: DW050: - Photoshop Camera Raw (64 bit) _6.3_AdobeCameraRaw6.0All - x 64: installation failed

ERROR: DW050:-CSXS Extension history: installation failed

ERROR: DW050:-Photoshop Camera Raw: installation failed

ERROR: DW050:-Adobe OnLocation CS5.1_AdobeOnLocation5.1en_USLanguagePack: installation failed

ERROR: DW050:-camera profiles Installer: installation failed

ERROR: DW050:-Adobe Extension Manager CS5.5: installation failed

ERROR: DW050:-Adobe XMP panels CS5_3.1_AdobeXMPPanelsAll: installation failed

ERROR: DW050:-Microsoft_VC80_CRT_x86_x64: installation failed

ERROR: DW050:-Adobe Device Central CS5.5: due to a lack of Language Pack installation

ERROR: DW050:-Adobe Mini Bridge CS5.1: installation failed

ERROR: DW050:-Adobe OnLocation CS5.1: due to a lack of Language Pack installation

ERROR: DW050:-Photoshop Camera Raw (64-bit): installation failed

ERROR: DW050:-Microsoft_VC90_MFC_x86: installation failed

ERROR: DW050:-Adobe Media Encoder CS5.5 X 64: installation failed

ERROR: DW050:-AdobeTypeSupport CS5: installation failed

ERROR: DW050:-Adobe CSXS Infrastructure CS5.5: installation failed

ERROR: DW050:-Adobe OnLocation CS5.1 third party content Wrapper: installation failed

ERROR: DW050:-AdobeHelp: installation failed

ERROR: DW050:-common x 64 required font Installation: installation failed

ERROR: DW050:-Microsoft_VC90_ATL_x86_x64: installation failed

ERROR: DW050:-Adobe Story: installation failed

ERROR: DW050:-Microsoft_VC90_CRT_x86_x64: installation failed

ERROR: DW050:-Microsoft_VC80_CRT_x86: installation failed

ERROR: DW050: - CS5.5_DeviceCentral3.5LP - en_US-Adobe Device Central: installation failed

ERROR: DW050:-AdobeCMaps x 64 CS5: installation failed

ERROR: DW050:-AdobeTypeSupport x 64 CS5: installation failed

ERROR: DW050:-camera profiles Installer_6.3_AdobeCameraRawProfile6.0All: installation failed

ERROR: DW050:-Microsoft_VC90_MFC_x86_x64: installation failed

ERROR: DW050:-AdobeOutputModule: installation failed

ERROR: DW050:-Microsoft_VC90_MFCLOC_x86: installation failed

ERROR: DW050:-AdobePDFL CS5: installation failed

ERROR: DW050:-AdobeCMaps CS5: installation failed

ERROR: DW050:-Adobe CSXS Extensions CS5.5: installation failed

ERROR: DW050:-Adobe Encore CS5.1_AdobeEncore5.1en_USLanguagePack: installation failed

ERROR: DW050:-Microsoft_VC80_MFC_x86_x64: installation failed

ERROR: DW050:-ph: installation failed

ERROR: DW050:-the Committee of Adobe CS5.5: installation failed

ERROR: DW050:-Installation of common fonts required: installation failed

ERROR: DW050:-AmericanEnglishSpeechAnalysisModels: installation failed

ERROR: DW050:-Adobe Premiere Pro CS5.5: due to a lack of Language Pack installation

ERROR: DW050:-Adobe Player for Embedding x 64 3.1: installation failed

ERROR: DW050:-standard Adobe 2.0: installation failed

ERROR: DW050:-Microsoft_VC80_MFC_x86: installation failed

ERROR: DW050:-Adobe Player for embedding 3.1: installation failed

ERROR: DW050:-Microsoft_VC80_MFCLOC_x86: installation failed

ERROR: DW050:-SiteCatalyst NetAverages CS5.5: installation failed

ERROR: DW050:-Installation of recommended common fonts: installation failed

ERROR: DW050:-AdobeJRE: installation failed

ERROR: DW050:-Suite Shared Configuration CS5.5: installation failed

ERROR: DW050:-Adobe Bridge CS5.1: installation failed

ERROR: DW050:-Adobe Encore CS5.1: due to a lack of Language Pack installation

ERROR: DW050:-Raw_6.3_AdobeCameraRaw6.0All camera Photoshop: installation failed

ERROR: DW050:-Adobe Premiere Pro CS5.5_AdobePremierePro5.5en_USLanguagePack: installation failed

What's not?

View the requirements not met

How to fix? Read these requirements. It's called "requirements" for a reason...

Mylenium

Someone smarter than me--help me please understand this - songs is not found

This issue has persisted for a long time, but I am currently on iTunes 12.5 on Yosemite.

At a certain point in time, and I can not associate with a specific event like an upgrade, a lot of my songs 13 900 became 'broken' - impossible to locate. Not all, just a part... maybe 1/3 to 1/2.

I of the wrong and has given several times, not wanting to do a radical reconstruction, I just jumped the songs that have been broken.

I let iTunes manage my library - always have. All files, including the "broken ones" are sitting to the right users/username/music/iTunes/iTunes Media/Music/Artist...right were all I expect.

I recently found an album which had two songs next to the other, each 'broken', the other plays very well. If I go to the finder, they are right where they should be.

If I look at the .xml, the key to the place said same location, any other name for the song... and this combo of place/song name matches the location in finder.

Here are two songs from the Album even next to each other:

Track 651 Sugar Magnolia is very well and plays, track 652 ngone Saturday night is "broken" and cannot be found.

Here is the XML on the two files, you can see locations are correct:

< key > 6023 < / key >

< dict >

Track ID < key > < / key > < integer > 6023 < / integer >

< key > size < / key > < integer > 14551501 < / integer >

< key > total duration < / key > < integer > 505391 < / integer >

< key > track number < / key > < integer > 20 < / integer >

< key > year < / key > < integer > 1979 < / integer >

< key > update < / key > < date > 2008-12-23T 19: 46:10Z < / date >

< key > Date added < / key > < date > 2010-04-17T 01: 23:05Z < / date >

< key > bitrate < / key > < integer > 230 < / integer >

< key > sampling rate < / key > < integer > 44100 < / integer >

< key > counter < / key > < integer > 1 < / integer >

< key > play Date < / key > < integer > 3380317111 < / integer >

< key > play Date UTC < / key > < date > 2011-02-12T 05: 58:31Z < / date >

< key > Skip Count < / key > < integer > 1 < / integer >

< key > Skip Date < / key > < date > 2016-09-21T 15: 52:06Z < / date >

< key > notation < / key > < integer > 100 < / integer >

< key > calculated rating < / key > < true / >

< key > Album rating < / key > < integer > 100 < / integer >

< key > Persistent ID < / key > < String > 859F0AE52E3FACA9 < / string >

< key > track Type < / key > < String > file < / string >

< key > statement of case file < / key > < integer > 5 < / integer >

< key > folder County Library < / key > < integer > 1 < / integer >

< key > name < / key > < String > d3t03 - Sugar Magnolia < / string >

< key > artist < / key > < Grateful Dead String > < / string >

< key > Album < / key > < String > 1979.12.01 Pittsburgh, PA (SMD) < / string >

< key > type < / key > < channel audio file > MPEG < / string >

< key > location < / key > < String > file:///Users/myname/Music/iTunes/iTunes%20Media/Mus ic/Grateful%20Dead/1979.12.01%20Pittsburgh,%20PA%20 (SBD) /20%20d3t03%20-%20Sugar% 20Magnolia.mp3 < / string >

< / dict >

< key > 6025 < / key >

< dict >

Track ID < key > < / key > < integer > 6025 < / integer >

< key > size < / key > < integer > 8459472 < / integer >

< key > total duration < / key > < integer > 291474 < / integer >

< key > track number < / key > < integer > 21 < / integer >

< key > year < / key > < integer > 1979 < / integer >

< key > update < / key > < date > 2008-12-23T 19: 46:10Z < / date >

< key > Date added < / key > < date > 2010-04-17T 01: 23:05Z < / date >

< key > bitrate < / key > < integer > 232 < / integer >

< key > sampling rate < / key > < integer > 44100 < / integer >

< key > counter < / key > < integer > 2 < / integer >

< key > play Date < / key > < integer > 3472053636 < / integer >

< key > play Date UTC < / key > < date > 2014-01-09T 00: 20:36Z < / date >

< key > notation < / key > < integer > 100 < / integer >

< key > calculated rating < / key > < true / >

< key > Album rating < / key > < integer > 100 < / integer >

< key > Persistent ID < / key > < String > 0AD50DB205887189 < / string >

< key > track Type < / key > < String > file < / string >

< key > statement of case file < / key > < integer > 5 < / integer >

< key > folder County Library < / key > < integer > 1 < / integer >

< key > name < / key > < String > d3t04 - e: One More Saturday Night < / string >

< key > artist < / key > < Grateful Dead String > < / string >

< key > Album < / key > < String > 1979.12.01 Pittsburgh, PA (SMD) < / string >

< key > type < / key > < channel audio file > MPEG < / string >

< key > location < / key > < String > file:///Users/myname/Music/iTunes/iTunes%20Media/Mus ic/Grateful%20Dead/1979.12.01%20Pittsburgh,%20PA%20 (SBD) /21%20d3t04%20-%20E_%20O ne%20More%20Saturday%20Nigh.mp3 < / string >

< / dict >

< key > 6027 < / key >

Here's the location of the physical file Finder of the two files:

I DON'T SEE A DIFFERENCE:

When I right click - read information in iTunes, the news of 'rent' are different - the 'broken' file includes the "file:///" and are not the songs that play very well (starts by / users /). Meta-data are the same.

The file above plays very well, it does not work (and it is compatible with all the thousands of files broken):

So I am confused - any help would be greatly appreciated. I thought I was going to need to do a simple "find and replace" to "file://", but after reviewing the file data and the xml meta-balises, I am puzzled.

Oh Yes - here is the metadata for the song "broken" above which has the "file://" to the location:

.. .it shows the location as the other playable songs... just/users /...

puzzled

Assuming that everything I laid out above are correct:

How do you fix a large group of songs including "not found" If iTunes:

(1.) the path and the name presented in the library xml is correct and

(2.) the file is actually not exactly where the xml library says it does.

???

I wanted to disable Windows update service from command line. can you help me please on this?

I wanted to disable Windows Update service by command line can help me on this.

Hi Vikas Sharma,

We do not recommend to disable the Windows Update service.

However, you can try following step below:

> In the Windows command line type the following command, and then press ENTER:

> start wuauserv sc config = disabled

Please let us know if that helps.

Dear experts. Help me please with this request.

Similar Questions

Maybe you are looking for