Portege R830 BIOS changelog

Similar Questions

• Need to check the update of the BIOS Portege R830 without Intel TXT

  Hello Forum,

  I have exactly the same problem as described here 2 years ago:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65519

  I need to update my BIOS, but I can't because the update of the BIOS told me that the Intel TXT is enabled.
  Unfortunately I can not disable it in my bios. Its just not selectable. The 'cursor' jumping just above him.
  I can only 'hide' which does not help.
  I have the same thing for the VT - x and VT - d setting in the BIOS. Is not selectable or editable as well.

  TPM is not active if...
  I installed after infineon and he tells me I need to enable the TPM in the bios to use. :-(

  I have a very old Bios Version 3.1 and I read in the changelog that there are a lot of TPM in v 3.4 and 3.5 related changes...

  In any case...
  A P007Dv360A_EC77V140.zip file has been transferred to 2shared.com who fixed it at the time, a user named Paolo30.
  Unfortunately, that this file has been deleted on 2shared.com

  can someone please provide this file (or an update of the bios later) which resolves this issue?
  Thanks in advance.

  Portégé R830 - 10 p belongs to the series of PT321 if you need the BIOS for Portege R830 PT321

  You can download older versions of pages driver Toshiba BIOS.
  For example: http://www.toshiba-asia.com/sg/support/drivers

  On this page of Toshiba Asia I could find all the BIOS for this Portege model.

• Portege R830/PT321E: update the Bios stops with "year error occurred while...» »

  Portege R830/PT321E: update Bios end with ' year error occurred while preparing the environment of update...» »

  Following message appears first

  BIOS version: Worm. current 3.40-> update version 3.70
  THIS Version: worm. current 1.30-> update version 1.50
  BIOS and THIS should be updated

  During BIOS update seems following message:

  + An error occurred during the preparation of the updated environment. You have not given permission to run the update. +

  My settings:
  -BitLocker is turned off.
  -No connection to a docking station
  -Windows 7 is installed
  -Boot mode is enabled? I guess that means:
  "Close all open programs, shut down windows and then turns off your computer."

  Any idea what is the problem?

  Post edited by: ML

  Hi ML

  Stupid question maybe now but why do you want to update the BIOS on this, I think, fairly new laptop model?
  Have you noticed a few issues or hardware issues?

• Portege R830 - updates BIOS and USB 3

  Hi all

  I have a Toshiba Portege R830, business management Windows 7 (SP1) 32-bit (for work).
  I also start Linux Mint 14 64-bit, that I installed it on a portable USB HDD (non-professional).

  I recently bought a 3 USB HARD drive, but when I connect it to the USB 3 port on my R830, it gives me only USB 2 speeds (25 MB/s).

  I checked with some diagnostic utilities (usbdeview, etc.), who say that the drive is connected in USB 2.1 mode.

  The drive reports itself as being 3 USB, cable is USB 3 (SuperSpeed) and the port that I use on the R830 is 3.

  I feel the same way, if I boot on windows or linux.

  I've updated all the drivers on the two operating systems, does not.

  then I tried to update the BIOS, but I get the following error:
  "An error occurred during the preparation of the updated environment.
  You have not given the permission to execute the update".

  For the record, it's the BIOS I'm leaving, & to.
  BIOS version: Current Ver.2.80--> updated Ver.4.10
  THIS Version: Current Ver.1.10--> update Ver.1.60

  Does anyone know why I wouldn't get USB 3 speed (which, for my drive, are expected to be around 40-50 MB/s), or why all the diagnostics say USB 2?

  Does anyone know how to overcome the problem of updating the BIOS?
  (I tried in safe mode, disable AV, disabling NX)

  See you soon

  This USB driver is installed?

  Please try to install it and check again speed USB.

• Portege R830 - error 3.9 update BIOS

  Hi all

  Portege R830 - 138 current BIOS 3.7

  I can't update the BIOS to 3.8 or the latest version of 3.9. Error: This computer is not supported.

  VAP is installed and modules work. A previous post on the forum suggested that it could be linked to the Intel firmware update recent Management Interface which I had asked and I am unable to uninstall or rollback.

  Any suggestions?

  THKS!

  Hello

  One of my friends has updated the BIOS from 3.7 to 3.9 without major problems.
  It might be possible that you cannot update the BIOS because of missing or disabled TVALZ services.

  Go to control panel of control-> the Administrative Tools icon, and then click services.

  Here, you can check if the TVALZ service is available, if it is available, turn it on and then try to update the BIOS.

  If this does not work, you will need to retrieve the laptop using recovery disk or recovery disk that the BIOS update should functions using factory reset Toshiba

• Portege R830-10 q HARD drive slot?

  Hello.

  I have a Portege R830-10 q with 128 GB SSD inside, but it becomes too small.
  Is there another location for normal HARD drive, or what I have to buy [this: http://www.ebay.co.uk/itm/like/261480744399?limghlpsr=true & hlpv = 2 & ops = tru e & viphx = 1 & hlpht = true & lpid = 108 & devi this = c & adtype = pla & crdt = 0 & ff3 = 1 & ff11 = ICEP3.0.0 & ff12 = 67 & ff13 = 80 & ff14 = 108]
  and throw the unit DVD to the HARD drive inside?

  Thank you

  Portege R830 supports only a single disk drive HARD or SSD.

  With regard to the optical adapter Bay HDD/SSD Caddy:
  I'm not quite sure if BIOS would be able to use suchpart m.

  In the past, some computers laptop Toshiba supported Select Bay who was allowed to use the HARD disk enclosure in the Bay of ODD, but many books don't supports this functionality.

  In the worst cases, you need to replace your current HDD/SSD with the biggest HDD/SSD

• Re: Portege R830 eSATA - failure to mount the external hard drive

  {color: #000000} I have a new Portege R830 with combined eSATA / USB port. It will recognize an external drive in as drive 0 Device Manager but does not mount the drive under Win 7 x 64. The road rises and works absolutely normally under USB2 via the combined port or one of the other ports on the PC. The player works absolutely normally under eSATA on another desktop PC Win 7 x 64

  Search Internet suggests that this is a widespread problem with Win 7, but given the above commentary to normal operation on my desk, strongly indicates that it is "simply" a laptop Toshiba driver problem Win 7 x 64.

  A workaround solution that someone had reported was to boot the PC with the drive connected. This will lead to the PC mount the drive, but I found to be unreliable - tends to freeze the unpredictable machine, but when logged in it showed he was transferring data at a reasonable speed.

  The search for these forums, no solution has not identified... Toshiba - think you should answer it please!

  Afetr all is a 'feature' significant on the Portege and rather defeats the point if it is impossible to use...

  Kind regards

  Kevin {color}

  Hi mate

  First of all, it is a forum for a user to this don t address issues from Toshiba here in the forum, but other users of this community.

  Back to your question; Does this mean that the HARD drive connected to the eSATA port cannot be recognized as device eSATA but USB device?

  Please check if you are using the latest version of the BIOS. On the European driver Toshiba page, you can find the BIOS version transferred to 29/07/11.
  In addition, I recommend to check the BIOS settings; check if eSATA is activated it.

• Portege R830 cpu usage

  Hello!

  I recently purchased your Toshiba Portege R830 product for 4 days, and I notice some CPU usage when I start the computer and a bit of fan noise.

  Is it normal in the computer? Something related to the series?

  I followed the advice in other threads:

  Bios update
  updated fingerprint driver

  and seems to not work...

  Should I change some settings in the bios?

  Please can you let me delete this topic?

  Thanks in advance

  Hello

  You can try to disable the fingerprint in the Device Manager or simply remove the software of fingerprint for testing purposes.
  In addition, please also check the table below for recommended settings of power plane:

  * 1st proposal: *.
  Cooling method: Maxim Performance
  Intel Turbo boost Technology: activate
  CPU frequency mode: always low

  * 2nd proposal: *.
  Cooling method: optimized battery
  Intel Turbo boost Technology: disable
  CPU frequency mode: always high

  Here you can find the simple options:

  
  Changes in the operating system:
  --> Power Options control panel--> change the parameters of plan--> change power avancΘs--> TOSHIBA Power Saver Settings--> cooling method

  Changes in the Bios (power management):
  Intel Turbo boost Technology

  Changes in the operating system:
  TOSHIBA HW Setup--> the CPU frequency mode

• Portege R830 - Download Cant PT321E value added package driver.

  Hello!
  I can't download the toshiba.eu/support/drivers/laptops/ driver for

  Toshiba Portege R830 - PT321E
  Windows 7 64 bit
  Location - Latvia

  Download keeps failing sometimes to 10% to 50% complete.

  Sometimes the page is inaccessible. Tried to download the driver of different networks.

  Thank you.

  Today, I tried again to download the driver package. Downloaded without any problem.
  Wasn't the best place where to post about him, but I couldn't find it on the page where I can report problem Web page technique.

• Portege R830 - functional keys not working after installing Windows 7

  Hello
  I have Toshiba portege R830.
  I install new windows 7, no recovery - new windows.
  Now, I have a problem because my function keys don't ' t work.
  I can't turn on y wifi with fn + F8.
  I was looking for drivers, but I don't ' get there for my toshiba.

  Originally posted by Tomasz
  

  Hello
  I have Toshiba portege R830.
  I install new windows 7, no recovery - new windows.
  Now, I have a problem because my function keys don't ' t work.
  I can't turn on y wifi with fn + F8.
  I was looking for drivers, but I don't ' get there for my toshiba.

  Have you installed the VAP (value added package)

  That should restore the functionality of your

• Question of compatibility of Toshiba Portege R830 - 1 8 RAM

  Hi all

  I know someone who owns a portege R830 - 1 8. He asked me, if my laptop RAM is compatible with your laptop.

  He did inside the laptop 2 gb 1Rx8 PC3 - 10600 S - 09 - 11 - B2.

  My RAM is 4 GB 2Rx8 PC3 - 12800S - 11 - 12 - F2.1600.

  Can he use my RAM?

  THX and greetz

  Both are PC3, but not sure about the speed difference.
  It can work, give it a try.

• Portege R830 - Win 8.1 Value Added Package (Flash cards)

  Hello.

  First of all I would like to say that I used my Toshiba Portege R830 with all the operating systems since Windows 7 and I have never installed fresh OS.
  That said, I could not use Intel WiDi on Win10 and had to return to Win8 (DVD which I happily bought as well as the upgrade).

  I installed all the software Toshiba using Upgrade Wizard and for the first time since the 2011', there was no Flash cards available (drop-down menu shown with use of the Fn keys). I used to like 2.5 years on Win 8/8.1 and now his party and is not available to the installation...

  WTF? After a week, I discovered that cards Flash is not present in VAP 1.6 (only in 1.5.X.X or earlier).
  Unfortunately I can't install only stand-alone Flash cards (or can I?).

  And here my question: if I install VAP 1.5 (with Flash cards), can I (ANYHOW) strengthen certain elements (such as system driver) without uninstalling the previous version of VAP?

  From my experience when I run VAP 1.6 installer first thing it does is an uninstall complete previous versions.

  Please help me! I can't imagine who thought that removing the 1.6 flash cards would be a good idea...

  Driver Toshiba UE page provides the Key Utility for Windows 8 Upgrade feature Toshiba v1.00.6626.03.

  So, if you have installed Value Added Package 1.6.0130. You must also install the key function Toshiba utility

  

• Portege R830 - need details template

  Hi - I have a Portege R830 and cannot identify the exact model - I have the serial number 4C047625H, but that's all

  The sticker on the back was covered by a sticker SUB and I can't get the model number!

  Help please

  Run Toshiba Service Station to display the model number.
  Another tool you can use is Crystal DMI (google it).

• Portege R830-10v / i7 / change internal SSD 225 GB

  Hello

  I need to change my flash drive SSD internal 225 GB for a 512 GB SSD!

  What should I do to the hardware and software level?
  Can I take any SSD?

  Thanks for the help?

  Best regards, Florence

  The HDD or SSD drive update requires no special modifications in the software or hardware.
  You need a compatible player SATA SSD 2.5.

  Here is a nice and very useful document how to upgrade / replace the Portege R830 & Satellite R830 series SSD or HARD disk drive.

  http://APS2.toshiba-tro.de/KB0/CRU18037E0000R01.htm

  Of course, after this upgrade, you'll need to install the system new the best choice would be its use or recovery disk and recover the laptop to factory settings.

• Portege R830 - request for Information

  Hello

  I have a Portege R830-10R, she SATA III?
  I notice a big difference if I decide to change of na SSD and add 4 GB of memory?

  Thanks in advance for any answer!

  Have fun!

  I can confirm the experience of Liam and Bunzena; switching on the SSD is the best choice you can make, and this small update will improve performance of the significant laptop.
  I did these updates in the past and of course the SSDS are not cheap parts but I do not regret.

  By the way: you can install diagnostic tools material as another like SiSoft Sandra or Everest Home Edition. Both will provide you with details of the controller and the performance.