Debugging options

Similar Questions

• How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  Here is the error

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 219949
  Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
  Info: Treatment 219949 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

  If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

• Is not a simulator debug option in the build configurations

  Hello. All the

  I'm a newbie in the cascades.

  After installing the mac OS x ndk (stunts for blackberry 10 beta 2), I tried to set up the IDE.

  When I right click on the project and select the build configurations. There is only one option: default value.

  No Simulator debug option.

  So, when I try to run the application, he still received the error 8.

  How to fix it.

  Thank you very much.

  OK, reimport the project using the following options:

  Import-> General-> 'existing projects in the workspace.

  instead of "as a project makefile" and let me know if it works

  Martin

• Citratest debugging options

  Hi, is there an option to debug code Citratest, step by step, as in VB, so that the developer can look at what is happening at each stage. Also I would like to know if there is no option to 'WATCH '? Thank you

  Hello

  Check the user guide, I see these

  

  These options exist in your environment?

  Golan

• Debug mode: debug option to check table indices?

  There is any provision for the CVI compiler (in debugging) detect table indices that are out of bounds, when the array is multidimensional, and the release of index of table of limits still ends up pointing to an element in the table?

  Try this example. The index of the final loop, I, exceeds the dimension declared for 3, but a [0] [i] still points to a different location in the table:

  #include
  main()
  {
  int i, a [2] [3];
  for (i = 0; i<3; i++)="">
  a [0] [i] = i;
  [1] [i] = 100 + i;
  }
  for (i = 0; i<6; i++)="" debugprintf("dif="%i\n" ,"="">
  }

  Thank you

  Ian

  Ian,

  Unfortunately, the linker is not able to make up for it in ICB at the time of compilation, even with maximum debugging settings. I went ahead and put in a suggestion of product for you well.

• Permit "Disable the web process per tab" under debugging, now Safari crashes whenever I try to start it.

  How can I Reset Safari Debug options when Safari does not work? Is there some command line options?  I enabled "Disable web of per-tab processes" and now whenever I try to start Safari crashes.

  Hi WellingtonWlfmn,

  Please update to Safari to the latest version: https://support.apple.com/en-us/HT204416

• LoadPanel fails with error-94 file not found code unless I am in debug mode

  I've written a dll that has a number of panels in a .uir file.

  When I have it, debug using "debug SeqEdit.exe", everything works fine.

  But, if I just use "run SeqEdit.exe" (without debugging and using the same sequence file, I get the error message:)

  "Error in the call to LoadPanel.

  Handle of parent of Panel: 0,

  The IUR filename: HiPot.uir.

  Resource Panel ID: 4.

  Error code:-94

  File not found. "

  The IUR file is always in the same place, the only difference is that I do not use the debug option.

  It's probably something simple I've forgotten?

  You should not use LoadPanelEx in this case?

• Cannot debug a VBS Script in tiara 2012

  Hello, I'm trying to run the DIADem Advanced self-training, and I cannot debug any script in the exercises of.  I already unchecked read-only, so that they can be changed.  If I go to the menu bar and go to the Script, all debugging options (Debug VBS Script, point to stop on / off, breakpoints off) are grayed out, as well as the icons are also grayed out.  Y at - there a step I'm missing or an option I have not installed?  Thanks for the help.

  Too bad.  I thought about it.  I had to install the Microsoft Script Debugger.  It works now.

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=22185

• ehExtHost.exe Service error Common Language Runtime Debugging

  At the opening of Media Center (2005, Windows XP) I get this error message.

  ehExtHost.exe Service Common Language Runtime Debugging

  Request a generetaed an exception that could not be treated.

  (Process Id =) x 1648 (5704), Thread id =) x 490 (1168).

  I click on the option not (not the debug option) and the message disappears, seams to work OK, but I always get this message when I open the Media Center.

  Any help is appreciated.

  Hi TrevorGeddis,

  This can be caused by a corrupt installation of the .NET Framework. Follow the steps in the article to uninstall and reinstall.

  Install the .NET Framework fails and requires manual removal

  http://support.Microsoft.com/?ID=320112

• Hidden JDE display options

  I was looking for more in the debugging options and view of the JDE and all display options are blanked out, what should I do to make them work?  Also, I set a few breakpoints and the first time I ran it, they worked, but now they do not have...

  Some views are available only when you have stopped on a breakpoint.

  Regarding the breaking points that have stopped working.  Please ensure that the version of the app in BlackBerry JDE matches that on the BlackBerry handheld computer/Simulator.  If the code is different breakpoints will not work.

• The device Debug - cannot find the app after firing the debugger

  I develop for BB 9000 (bold), on the Eclipse platform. I have the eJDE 1.0.0.67 installed with the OS pack 4.6.0.19 and 9000 Simulator.

  Regular debugging works fine. The device is identified by the debugging options screen after connecting the usb cable. When you pull the debugger of the device, the camera screen whitens and displays the message "attach debugger". On the Eclipse console, I see that the device has been attached ("' attach: success '"), and I get the endless list of "no debug information is found for FOO". After that, the device display the clock again and nothing happoens. My App is not raised, and there is not anywhere on the device.

  The debugger however is attached, as I can see the list of threads running on the device, and I get all outputs from the regular camera journal.

  What I am doing wrong? How do I launch my application for debugging?

  the debugger does not start your application.

  If the OS on JDE and device versions do not match, you may not be able to use breakpoints.
  SYSOUT etc. is always available.

• Impossible to debug in Eclipse

  Hello

  I'm trying to debug an application in a true smart phone BlackBerry. I use Eclipse for a 8703e with OS 4.2.1.110.

  When I run the debug option, he tell me that I lack the net_rim_app_manager.debug file. I saw on the forum I need to navigate to the folder of the Simulator and select the correct file. I tried with all version of Simulator and Eclipse always telling me that I don't have the right file. I've read elsewhere that I need the exact os version of the Simulator, but there is no RIM Web site. I use the 4.1.0.359 version so that the Simulator for the 8703e.

  If I ignore the error message, as I read in another post, debugging starts, but my breakpoints doesn't work.

  What can I do? Any ideas? I really need to debug on the real device, cause all works on the Simulator, but I have problem in the actual device.

  THX

  I found the problem! The version was not quite the same thing (only an IP in a change of HttpConnection) so the debugger do not stop.

  For all the people who have this problem, make sure you have the exact same version of the application installed and use in Eclipse (do not add a space online!).

  Thx for the support

• Do remote debugging in production with encapsulated code db

  Hello

  Assuming that we have the following scenario:

  -database out of production where all the code is unwrapped and compiled with debugging options.

  -database of production which has wrapped up the code and compiled without the debug option. It is necessary that the code should be wrapped on this environment. In addition, it is necessary that the pl/sql code is compiled without the debug option.

  -pl/sql code out of production and production environment on the same revision number, that is all the code on the production db is shrouded in code which is on non-production db.

  Assuming that one of the units of pl/sql call dbms_debug_jdwp.connect_tcp with the ip address and the port that points to my Sql developer, I'll be able to debug the production environment (which has enveloped the code and is compiled without the debug option) using Sql Developer?

  Thank you

  KS

  N °

• Cold Fusion 11 debugging question

  Hello

  Attempt to activate the debug option in Cold Fusion 11 in the development environment.

  In the administration of the CF, the "robust Exception enabled" is enabled.

  The following URL shows error screens. These screen do not appear in Cold Fusion 11

  The complete Guide to add it to your ColdFusion Application to error handling | Raymond Camden's blog

  The screen that appears is the:

  500 - error internal server.

  There is a problem with the resource you are looking for, and it cannot be displayed.

  Y at - it another option to activate?

  Thank you

  Mike

  The page you see if IIS error page. You'll see this usually when custom error pages have been set up, which is usually by default. You need to change the setting to display detailed errors.

  You can assign it detailed mistakes that will allow all users to see the CF error or assign errors detailed for local requests and custom outdoor errors. This will allow you to see the CF error on the local server, but applications remotely get the default IIS error.

  You can change the setting by opening the IIS management console, select your Web site on the left side, by clicking on the icon of error Pages in the right-hand side and then by clicking "Edit function parameters" in the right pane.

  If it is an internal server used for testing, you can assign a fair bit option detailed errors.

  

• I have a problem with debugging in a local development environment.

  I'm having a problem with my local development environment.

  I have version 10.3.5 WebLogic Server on my laptop and I am using Eclipse v3.8.1 as my IDE.

  I built a server in Eclipse, I imported a .war file and place the file properties to point to an Oracle database, not on my laptop.

  I built the project and added the server.

  But when I tried to start the server in debug mode I got this message. :

  Unable to connect to remote VM. Connection refused.     Connection refused: connect

  As the Weblogic Server is loaded on my laptop and I tried to run the server in the Eclipse Server view Debug

  Why it says "Failed to connect to remote virtual machine".

  Why he thinks I'm trying to debug remotely?

  I thought I was set up for local debugging:

  Hello

  To enable the debug option in Weblogic, please add the following lines (in bold print) to startWebLogic.cmd in bin directory - your domain

  Set JAVA_OPTIONS =-Xdebug - Xnoagent - Xrunjdwp: transport = dt_socket, address = 8453, server = y, suspend = n % SAVE_JAVA_OPTIONS %

  And in eclipse change port configuration debug as 8453.

  I hope this will work!

  Kind regards

  Prateek Gupta