ehExtHost.exe Service error Common Language Runtime Debugging

Similar Questions

• How can I get rid of the message HPQTHB08.exe - Common Language Runtime Debugging Services?

  I run a HP Scanjet 4890 scanner with my setup. I use the software partner HP (HP solutions Center documents Viewer) with my scanner.

  I get a window called HPQTHB08.exe - Common Language Runtime Debugging Services, the Application has generated an exception that could not be treated, process ID = 0x6b0 (1712), thread ID = 0x6c0 (1728), click OK to close the application, click on CANCEL to debug the application.

  What is c?

  I tried to click on the two, and I get a message saying that a registered JIT debugger is not available. An attempt to launch a JIT debugger with the following command resulted in an error code of 0 x 2 (2). Please check computer settings cordbg.exe! a 0x6b0.

  I am curious to know which in HP cela and how can I get it resolved.

  I uninstalled Photosmart first 6.5 as you say, then I looked in program files / HP / Digital Imaging / bin. The HPQTHB08 .exe file wasn't there. I rechecked and after determining and confirming that the hpqthb08 was not there, I tried the HP solution center software to see if my scanner worked. He did it, thank you.

• Common Language Runtime Debugging Services

  I get the fatal execution engine errors.

  onfserv.exe - Common Language Runtime Debugging Services

  McafeeDataBackup.exe - Common Language Runtime Debugging Services

  MSI189. Temp - Common Language Runtime Debugging Services

  MSIEF.temp - Common Language Runtime Debugging Services

  What is the cause and how can I solve this problem.

  It could be a virus, try to scan your computer with other antivirus software you have now installed. If this isn't the problem check the chipset drivers and all windows updates. Cheers and post back if none have worked!

  Post edited by: daniel.micu

• MemeoLauncher.exe - Common Language Runtime Debugging Services error

  Error occur every time you start. Can not find a solution.  I have a XP system with all patches installed.  Thank you!

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Sony Vegas 9.0 downloaded and saved, gets error,"an error occurred from Vegas Movie Studio. An internal error happened in the Common Language Runtime to run engine. »

  Just Sony Vegas Movie Studio 9.0. "I could download and register successfully, but whenever I try to open it, the yellow triangle with an exclamation point appears saying:" an error occurred from Vegas Movie Studio. An internal error happened in the Common Language Runtime to run engine. "So I click on details and it says failed to initialize script host. I don't know what that means. What can I do to make it work?

  Too bad. I got out my computer and it is now successfully in collaboration.

• Language Runtime Debugging Services process ID current errors in Media Center

  Separated from:  http://social.answers.Microsoft.com/forums/en-us/mediacenter/thread/c6d65a01-000b-4abf-a0a9-40c1ade236cf

  It did not help me, still the same problem.

  Try this: -.

  Start > run and type: cmd

  in the command prompt window, type the following commands and press ENTER after each command of the: -.
  Type: regsvr32.exe atl.dll
  Type: cd.
  Type: windows cd
  Type: cd eHome
  Type: ehSched /unregServer
  Type: ehSched/service
  Type: ehRecvr /unregServer
  Type: ehRecvr/service
  Type: ehRec.exe /unregServer
  Type: ehRec.exe/regserver
  Type: ehmsas.exe /unregServer
  Type: ehmsas.exe/regserver
  Restart the Media Center

  S.Sengupta Media Center MVP

• Iexplore.exe - Application error (0x0eedfade) 217 runtime error

  I had error messages appear on my screen I have begin to close. The first said: Iexplore.exe - Application (0x0eedfade) 0x7c812a5b and the second error says: Runtime error 217 at 0473F48E
  What do mean?

  Yesterday my laptop stops in the middle of me to use it and then whenever I tried to restart again (even in safe mode) stop you it again before I had the chance. Today, I managed to restart the computer, but I got the same messages appear earlier today, as I was plugging the computer.

  Hello

  It seems that Microsoft internet explore caused an error.
  Somewhere I found a notice that this could happen after the IE 7 update and application Norton Antivir.
  Did you remove the Norton antivirus?

  I noticed that this software allows the slowest laptop. I used this several months ago. No I m using the Freeware tool called Antivir. It s great and free!

  After uninstalling Norton, please be sure that all the files have been deleted! The Norton Removal Tool can help

  Download Norton Removal Tool

• To insert a text entry on the Common Language RunTime programmatically

  Scenario is,

  I want to add a text on my page programmatically. That is to say when I press the button or press on enter into a text input, it automatically inserts the Code below in the Page Source File (XML file)

  < h:inputText id = "it6" style = "height: 15px;" Width: 40px; "/ >

  This code is generated when we add the HTML page JSPX type input text.

  How can I generate this code or insert text of entry program? Thanks in advance

  You can create and add components to the page when running, but it is not part of the xml source jspx, it will appear on the page, and you can create binding and validator for this according to your requirement

  Check this blog post -http://www.awasthiashish.com/2013/08/creating-dynamic-layout-form-and-ui.html

  Hope this will help you

  Ashish

• Question of Media Center Qosmio G - ehshell.exe runtime debugging series

  Hi fans of Qosmio

  I have a problem with my Media Center.
  When I try to view a video I downloaded the screen goes black and stay like that and when I CTRL ALT DEL off to get him a (ehshell.exe - common language runtime debugging) rises.

  First of all it says application has generated an exception that t couldn't be manipulated PID id = 0xc60 (3168) thread = 0x8c8 (2286).
  It gives me options, click ok to complete or Cancel to debug.
  When I click on Cancel to debug said registered JIT debugger is not available with 0 x 2 (2) check parameters cordbg.exe error code the 0xc60 happens.

  Hope someone can help me with this problem and I hope it's not technical.
  I m not very good on this subject.

  TNK, Mike

  > When I try to view a video I downloaded the screen goes black and stay like that
  Does this happen only to play THIS video or downloaded video?
  Did you check if you can play other video files correctly?

  I have goggled a bit, but unfortunately, there are not many cases about this error message.
  I think that it s simply something wrong with certain files, registry keys or the operating system is simply confused upward. In this case and to be honest it s nothing unusual in the wide word of computer systems

  First of all, you can try to clean the operating system using the CCLeaner. It cleans the OS files and the registry. In addition, it would be desirable to install all the patches and fixes available...

  If that doesn't do it, it would be very interesting to know if the same error would appear on own pre-installed OS

  So, as you see it s not easy to say why the error message displayed to certain procedures of investigations would be necessary

  Good luck

• Qosmio G20 - Microsoft Media Center Edition - ehExtHost.exe error

  I started having errors on my Qosmio G20 ehExtHost.exe when pass the screen of Media Center edition to record a television show.

  Language Runtime Debugging current Service ID = 0x17d4 (6100) and id = 0 x 138 (312)

  I have a glance on the web and found a few comments about Norton screwing of the NETWORK settings, I've just updated Norton Internet Security 2009 version so it's possible.

  I have also a message with something not being able to connect to Windows Messenger so don't know why it would.

  I recorded a program and it's OK when I played it back.

  Anyone has any ideas how to solve this problem (or problems)?

  MB

  Googling around you can find so many reports about this. I also found an interesting article on this subject. Please check it out. Maybe it will help you to solve this problem.

  How to solve the ehExtHost accidents that may occur during the launch of Media Center?

• version of runtime common language 4.0.30319.0.

  Hello

  You try to run the Dell Diagnostic module, but it asks that the Common Language Runtime from Microsoft version 4.0.30319.0. should be in place.

  Cannot find all versions.

  Thank you

  Tom

  PS I am unsure of the category Forum and the correct Windows topic, but the Windows version is correct.

  Hi Tom,

  According to the runtime error that you display, it's .NET 4.0 problem, make sure that the computer of the user/client have .net installed 4.0

  Please install from the link:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=17851

  For more information:
  http://msdn.Microsoft.com/en-us/library/ddk909ch (v = vs. 71) .aspx

  Let us know if you have other questions about Windows in the future.

• "isass.exe system error indicates an encountered or specified revision number is not one known by the service." System does not boot.

  My roommate has downloaded a manual from LG Electronics cell phone in format .pdf (Adobe). The download is complete on Firefox. It double click on the download finished in the 'Download', its pc box became very slow and finally frozen. It is running Windows XP Media since 2004 / 2005.
  When it tried to reboot, the following message appeared...

  "... isass.exe system error indicates an encountered or specified revision number is not one known by the service." Continues it's maybe a more recent revision, then the service is aware of... »

  Then will continually attempt to restart. by a failure. Note the sequence of the events above are as accurate as the harshness.

  Does this mean the registry is damaged?

  Ran Iolo System Mechanic and has been able to run the tests in two (2). One of the physical drive and the other to the integrity of the partition. Nothing helps. A ran Norton recovery and found no errors. Performed a chkdsk /r and no mistake. Ran a chkdsk/p and found errors, but was not fixed. Any suggestions about where to start?

  I would like to thank all those who helped in my installation of Windows 8 Preview of consumer. He didn't find any problems of incompatibility with Norton a few months back and HP support said that the hard drive has been ruined, and I had to buy one of them after receiving the disks to install Win 7 again. Instead, I have used Drive Scrubber from Iolo System Mechanic and installed Win 7 perfectly. I'm now back with Windows 8. ALL of you are awseome!

  Donnie

  Hello

  Try to start in last know good confriguration pressing f8

  http://support.Microsoft.com/kb/307852

• ehExtHost.exe error in Windows Media Center.

  Original title: Media Center Error Message.

  I get an error of ehExtHost.exe when I start media Center on my computer running Windows XP.  It is said that a registered JIT debugger is not available.  When I click on cancel he says that there is an error cordbg.exe! a0x2d4.  Below the said process id = 0x16f8 (5880) and below that he wrote Thread id = 0 x 728 (5928).  All of the fixes listed here for error similar messages work to solve this problem or is - something different will be completely?

  You can try to reset Windows Media Center to see if it helps.

  Uninstalling and reinstalling Windows Media Player:
  Step 1.
  Uninstalling Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. search for multimedia and uncheck the brand in the face of Windows Media Player.
  4 restart the computer
   
  Step 2.
  Reinstall Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of the Windows Media Player.
  4 restart the computer.

  If you encounter problems with Windows Media Player, try to use the Troubleshoot utility to see if that fixes the problem.

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click the Windows Media Player settings.

  I hope this helps.

• I get an error when I connect to my computer that says Core Services Shell.exe - Application error

  Original title: shell.exe basic service error

  I get an error when I connect to my computer that says:
  Core Services Shell.exe - Application Error
  The exception unknown software expection (Oxc0000409) occurred in the application at location 0x0b98deaa.

  I have Trend Micro installed and it shows no virus. Any ideas of what could be the cause? It keeps popping up throughout the day.

  Thanks in advance.

  Hello MCL_999,

  Thanks for posting your question on the Microsoft Answers forum!

  From your description, you get a message indicating that Core Services Shell.exe meets an Application error.

  We will try to solve this by using a clean boot.

  Steps to try this are found here:

  How to configure Windows XP to start in a "clean boot" State

  Let us know if that helps.

  Best regards

  Matthew_Ha

• Svchost.exe application error, host process for Windows Services has stopped working

  Original title: Svchost.exe application error [windows loses focus]

  Every two minutes, windows 7 loses focus on the current window and I went in my event logs and found hundreds of errors of svchost.exe. Here's one of them:

  Name of the failing application: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
  Exception code: 0xc00000fd
  Offset: 0x0000000000018e3d
  ID of the process failed: 0x81c
  Start time of application vulnerabilities: 0x01cd7970b1953fa0
  The failing application path: C:\Windows\system32\svchost.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: efb97cea-e563-11e1-a232-002655497401
  The error message I receive after automatic power off repairs in the center of the Action is "host process for Windows Services has stopped working" and the process that opens after the loss of focus is Werfault.exe.
  Thank you for your time.

  Hello

  1. when exactly do you get this error message?

  2 have you made changes on the computer before this problem?

  Method 1:

  Step 1:

  Try to start your computer in safe mode and check.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not occur in safe mode, perform the clean boot. Read the following article.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 2:

  Try to scan your computer with the Microsoft Safety Scanner and check.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  Method 3:

  You try to perform the SFC (System File Checker) scan on your computer and check. Read the following article.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  It will be useful.