Deck CC: "photoshop is busy with another task.

Similar Questions

• HP Photosmart 5514: HP Photosmart "in use with another task' error.

  I'm sure you're all sick to see these questions, but I have not found that a reliable solution among the responses presented anywhere else on the internet.

  I have a printer HP Photosmart 5514, part of the 5510 B111 d e-all-in-one printer series, and it currently only allow me to scan a single document (with multiple pages). I connected via USB, not the network connection. My current operating system is Windows 10, 64-bit. I've uninstalled and reinstalled the drivers several times, using different methods: a part of the HPSolutionsFramework, installation of the manual pilot on its own and even with the method of detection of device HP Support Assistant. I tried the most common answer of "unplug, restart the computer, plug in. I also tried printing HP and doctor Scan to see if there is a driver problem but it clears all controls and nothing seems to be wrong. To be clear, restarted my computer "solve" the problem, even temporarily and no is not a final solution to my problem.

  Explanation of the issue:

  I run the HP Photosmart 5510d series software and click on the button "scan a Photo Document or". When the window opens, I click on "scan document to the file" and proceed to scan my document with however many pages, adding each page I want. When I'm finished, I hit 'save', my backup file and click 'done '. When I proceed to scan another document, hit the button causes nothing happen but one his mistake. When I start printing HP and Scan doctor and trying to do an analysis of test after he tells me that everything is going well, I get the error message:

  "The HP scanning application is currently in use with another task or another user on this computer. Please wait until the other task is finished, and then try again. »

  To be quite clear, there is no other task that I'm aware of in addition to the fact that somehow the software does not seem to let go of the analysis. There are no other users who use the computer outside of me. There is no other hidden running application. I went through the Task Manager to kill all the associated HP process to see if something it stops to run again. The only chance I have is with my computer restarts, but it would be foolish to scan documents of mass and restart after each.

  It worked properly on my other hard drive with the same version of Windows 10 installed on it. 10 Windows installed on a new drive and it does not appear to want to work after 1 document.

  If anyone has a help in this case, it would be greatly appreciated.

  Hi @Yenroh,

  Welcome to the Forums of HP Support!

  I see that you are able to scan with your HP Photosmart 5514 printer wireless. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Generally speaking, the reason why you get "the HP scanning application is currently in use with another task or another user on this computer. Please wait until the other task is finished, and then try again. "is because that the network signal is lost the connection and the freezing of the task analysis or the previous scan operation never ended.

  Please, try the steps in these guides:

  • Scan network connection is lost (Windows)
  • "Scan cannot be performed because another program or computer uses the network device" message in Windows when scanning on a wireless network

  TIPS:

  • Move the printer and the router more closely in order to improve the quality of the signal.
  • Change the channel on the router wireless.

  Ensure that your router and firewall do not block these ports.

  • Scanning: The UDP port: 427 TCP ports: 9220, 9500

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• The HD I had my installed Photoshop has now died. I now work with another HD and reinstall Adobe Photoshop. I had paid about $10 a month. How can I get Photoshop working in my computer, but in a new HD? Thank you, Pablo

  The HD I had my installed Photoshop has now died. I now work with another HD and reinstall Adobe Photoshop. I had paid about $10 a month. How can I get Photoshop working in my computer, but in a new HD? Thank you, Pablo

  Hello

  In order to download Adobe Photoshop, you need to download the desktop app creative cloud first.

  You can please apps download Adobe Creative Cloud | Adobe Creative Cloud free trial

  After downloading the desktop application, you can download photoshop through it.

  Kind regards

  Sandrine

• Hi, I want to install my cc, cc in lightroom photoshop and bridge to another drive to C: /... I can't find any option to choose my destination with my creative cloud software. Can you help me? Sorry for my bad English.

  Hi, I want to install my cc, cc in lightroom photoshop and bridge to another drive to C: /... I can't find any option to choose my destination with my creative cloud software. Can you help me? Sorry for my bad English.

  With the application of CC open, select the gear icon in the upper right, and then choose Preferences.  In the preferences of the screen select creative cloud and then look for the drop-down list installation location

• Have Photoshop 7.0.1 - recently left economy as or save pictures after the changes. Just hangs until I have kill the process with the Task Manager. Have uninstalled and reinstalled. Any suggestions? I don't want to upgrade to CC I hate subscription servic

  Just hangs until I have kill the process with the Task Manager. Have uninstalled and reinstalled. Any suggestions? I don't want to upgrade to CC because I hate subscription services and I often internet connection services interuppted.

  What operating system do you use?

  Reset the photoshop preferences could cure the problem.

  Press and hold down the Shift + Ctrl + Alt keys right after the beginning of the launch of photoshop 7

  (Shift-command-Option on mac)

  Keep possession of the keys down until you get a dialog box asking if you want to delete the adobe photoshop settings file

  Press Yes

• If I replace the control with another why DAQmx create channel once complain a false claim?

  I tried to replace the frequency by another control in the example found here complete PWM:

  http://www.NI.com/white-paper/2991/en

  However, I get the following error message:

  

  Possible reasons:

  Requested value is not supported for this property value. The value of the property may be invalid because it is in conflict with another property.

  Property: CO. Pulse.Freq
  Required value: 0.000000
  Valid values begin with: 22.300000e - 309
  Valid values ending with: 20.0e6

  Channel name: Dev1/ctr0

  Task name: _unnamedTask<10>

  My wiring diagram looks like this:

  

  If I cancel my change (i.e. I have remove the frequency control knob and turn it over to the control of the example, it works perfectly.)  I get the waveform is displayed in the oscilloscope.

  My goal is to simply use a frequency and duty cycle control knob.  How can I achieve this?

  There are two things to do.

  What I think you did now changes the scale of the handle.

  You will also need to change the values that are allowed to enter. You will do on the data entry tab in the dialog button properti.

  Uncheck the 'use default', the Minimum value limits and Maximum identical to your balance.

  Value "Response to value out of range" Coerce to both Minimum and Maximum.

  I hope this helps.
  Let me know if you have more problems.

• receiving exception "resource requested by this task has already been used by another task' for unknown reason

  Hi people.

  I am running in a bazaar error I'm not around.  I have a series of cDAQ chassis (9188) with a number of NOR 9208 each.  Everything I'm doing is the simplest of the simple acquisition of VI to extract data from each of the 16 channels of each 9208 and push values for the configuration UI.

  NOTE: the material is SIMULATED in MAX.

  I'm trying to create a task for each 9208, but DAQmx start Task.vi bombs out after the code creates the first few tasks successfully.  The exception:

  "Error occurred 200022 DAQmx = begin Task.vi; "Possible reasons: resource requested by this task has already been reserved by another task."

  Please see the attached screenshot.  I have provided two tables of physical constants Channel. Bombs currently wired table on 'AI_Module_07 '.  The unwired table bombs on the last "AI_Module_08".  It seems that I can move these constants in the table, so there is little or no motive behind the order.

  There are also segments of screenshot of MAX and the exception in the block diagram.

  Thanks to a bouquet.

  -Chris

  Hello Chris,

  Based on the screenshot you provided, it looks like you use too many independent tasks in a single chassis - I think that the timing engine can handle three (four memory), but based on this knowledge basethree simultaneous HAVE tasks - you can certainly use all eight locations to HAVE, but they will need to be divided into synchronized subsets.

  That said, if it is in fact the problem is that I feel, a more specific error would appropriate the "resource" referred in the present case is ostensibly the timing engine, but further clarification would be useful.

  Best regards

• Executed with another disk defragmenter program

  Hi-I have the same problems as others with this error message. But I think I know what caused it; I have upgraded to Windows 10, then when he lost all of my pictures and documents (Yes, MS remote trying to find them and could) I restored it all back to Windows 7. Fortunately, I had saved my files about 6 months, so I got most of my photos, etc. But now, I get this message "Disk Defragmenter runs with another program" and change the settings. Tried it, didn't work, so a post office tells to open Task Scheduler, so I did it, but an error pops up preventing me to go anywhere else,: the task image is damaged or has been tampered with. So, what should I do now? Thank you

  Data are the only thing that makes sense for the backup.  Programs (applications) must be re-installed in the newly rebuilt system.  Data: spreadsheets, documents, photos, videos, music - your stuff.

• Adobe Acrobat Reader 9.0 mistake is in conflict with another application.

  Original title: SideBySide errors Win7 on Dell Optiplex 980 (all Intel)
   
  Getting this error since the "day 1".
  Log name: Application

  Source: SideBySide

  Date: 02/06/2013-01:21:37

  Event ID: 80

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Irwin-PC

  Description:

  Activation context generation failed for "c:\program files (x 86) \Adobe\acrobat 9.0\designer 8.2\FormDesigner.exe". Error in manifest or policy file "" online. A component version required by the application conflicts with another version of the component already active. Contradictory elements are: Component 1: C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac.manifest. Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2.manifest.

  The event XML:

   

     

      80

      2

      0

      0 x 80000000000000

     

      41258

      Application

      xxx

     

   

   

      C:\Windows\WinSxS\manifests\amd64_microsoft.Windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac.manifest

      C:\Windows\WinSxS\manifests\x86_microsoft.Windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2.manifest

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

      c:\Program files (x 86) \Adobe\acrobat 9.0\designer 8.2\FormDesigner.exe

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

   

  Technician said this isn't a problem, but it seems to be involved in some problems of Adobe applications and continuously fills my mistakes (not warnings) event viewer. Can we do an action to eliminate these errors?

  Hi Irwin,

  Thanks for the updates.

  I would like to inform you that if all Microsoft services are unchecked, then restore points will be deleted; However, it is perfectly safe to hide Microsoft services. When you check the option Hide all Microsoft Services, while the third-party services are shown.

  I wish to inform you that amd64 has been seen in most of the newspapers of the events of similar problems.

  However, you can try the following steps:

  Step 1: I ask you to execute the following automated troubleshooting and uninstall Adobe Acrobat Reader.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall/

  Step 2: Install the latest Microsoft Visual c++.

  Package redistributable Microsoft Visual C++ 2010 (x 86)
  http://www.Microsoft.com/en-in/Download/details.aspx?ID=5555

  Please let us know the status of the issue.

• T61, Vista Business with Cisco VPN problem since the last update on the Lenovo site.

  Hello

  I use a T61, Vista Business, Cisco VPN Client v.5.0.02.0090.  Since my last update, October 2, 2008 on the Lenovo ThinkVantage Productivity Center site, I can't connect to my VPN Office. It was working perfectly before this software update. The only thing I remember is the update of the driver for Intel 4965AGN card v.12.x. I went to v.11.5 but it's not better.

  When I try to connect, I get the message "secure VPN connection terminated by a peer. "433 reason: (reason unspecified peer). I did a test with 'ping' IP address of the VPN and the response of the address.

  Usually, when the VPN Client is able to make the connection in the network connection window, I see "connection to the network space 2 (the Cisco VPN system map)" enabling / disabling Disable to activate the State. But there in my case, turn it off.

  I can connect with another PC using Windows XP. Thus, the VPN works.

  Any ideas?

  Thank you

  I met a very similar problem with my X61s. I was able to fix this by removing the print reading software for which an update was also installed on 2 Oct. As I barely use the fingerprint reader, it wasn't a problem for me. The Cisco VPN worked never better...

• ? What photoshop elements compatible with photoshop 11 14. Are there problems of transfer of catalogues PS 11 to 14. If I buy a new computer in the next 12 months can PS I transfer or install PS 14 on the new computer. CPH

  ? What photoshop elements compatible with photoshop 11 14. Are there problems of transfer of catalogues PS 11 to 14. If I buy a new computer in the next 12 months can PS I transfer or install PS 14 on the new computer. CPH

  chrisquanhallett wrote:

  ? What photoshop elements compatible with photoshop 11 14. Are there problems of transfer of catalogues PS 11 to 14. If I buy a new computer in the next 12 months can PS I transfer or install PS 14 on the new computer. CPH

  Yes, don't worry if you migrate to the same operating system (Mac or Win).

  Catalogue conversion works well.

  If you plan to migrate to another computer, you need to transfer your image files as your catalogs, which means that you can use the backup and restore method:

  Organizing moving items catalogue | Elements 6 or later version

  When you use this method, the restore process recognizes if the database version is the same. If it is newer, it invites you to convert the catalog after the restoration.

  To transfer the software elements itself, you will need to:

  -Use the Help menu > disconnect deactivate your license from the old computer

  -Reinstall the software

  -use the same menu to sign with your product license key.

• Another task is already underway!

  Hey guys;

  One of my has a warning on the snapshot. I tried to check what is happening... then I reliazed that even I can not open the console,

  and now I'm trying resatart - stop but it says, "another task is already underway!" also when I checked on vsphere events I have seen these... power of virtual machine? but I didn't say it! What is going on?

  

  In certain circumstances, there may be snapshots rest after the backup activity; The general explanation on the forums of Veeam.

  However, AFAIK, although VB & R left a snapshot after the backup/replication job, he must remove it in the next cycle of work. Starting with version 8, VB & a feature called instant Hunter who must find and take care of the orphans snapshots in automatic mode.

  See you soon.

• How to use photoshop cs2 cd with my macintosh?

  How can I access my photoshop cs2 cd with my macintosh? CD's of 2005 / I have my serial number.

  For CS2 activation servers running is no longer, so even if you were able to install from the cd, you would be able to activate it.

  You can download a version without activation of the link below. Use the serial number next to the download link.

  But if you'll be able to run CS2 on a modern Mac is another question. I'm on Windows, so I don't know.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• I want to re install Adobe Photoshop CS 6 on another computer, how to do?

  I would like to re - install Photoshop CS 6 on another computer, how can I do it please?

  Hello

  Make sure that you have disabled the Photoshop CS 6 of the first computer.

  You can download the Photoshop CS 6 in the below link mentioned, install and activate with serial number.

  Download Creative Suite 6 applications

  Thank you

• I am faced with a task.

  I am faced with a task - need to get rid of him.

  I have successfully used the 3D camera and followed all the points, selected three points thanks to a target, put a blanket on the task, adjusted to the right size with point angle etc..  When I test the clip the dressing does not follow the movement of the person. Original camera is on a tripod.  The movement of the person is minimal - moving from one foot to the other.  There's a Kubota moving in the background.

  If I could photoshop every image I want.  It would be easier.  The short clip is long 1m09sec.

  Any advice out there?  I worked three days straight on tutorials trying to figure out what I'm doing wrong, nothing helps.

  Thank you.

  If the object/person moves, the 3D camera Tracker isn't the right tool for the job. It's for when the movement in the scene is entirely because of the camera.

  If you are tracking just a spot and trying to blur, and then draw a mask around the task, use the tracker mask to follow the mask and use a mask effect to limit the effect to inside of the mask.

  Or using mocha.

  Or use point tracker.