Another task is already underway!

Similar Questions

• Another installitation is already underway complete this instilation before proseeding with this uninstall

  cannot uninstall a program that is always running or is not complete

  Hello

   
  1. did you make any changes before this problem?
  2 are you facing this problem with all programs or a particular program?
  3. what application it tries to uninstall?
  4. what version of Windows are you using?
  I suggest to try the following method and check
  Run the fix it from the link and install the program below.
  How to solve the problems when you install or uninstall programs on a Windows computer.
  http://support.Microsoft.com/kb/2438651

• receiving exception "resource requested by this task has already been used by another task' for unknown reason

  Hi people.

  I am running in a bazaar error I'm not around.  I have a series of cDAQ chassis (9188) with a number of NOR 9208 each.  Everything I'm doing is the simplest of the simple acquisition of VI to extract data from each of the 16 channels of each 9208 and push values for the configuration UI.

  NOTE: the material is SIMULATED in MAX.

  I'm trying to create a task for each 9208, but DAQmx start Task.vi bombs out after the code creates the first few tasks successfully.  The exception:

  "Error occurred 200022 DAQmx = begin Task.vi; "Possible reasons: resource requested by this task has already been reserved by another task."

  Please see the attached screenshot.  I have provided two tables of physical constants Channel. Bombs currently wired table on 'AI_Module_07 '.  The unwired table bombs on the last "AI_Module_08".  It seems that I can move these constants in the table, so there is little or no motive behind the order.

  There are also segments of screenshot of MAX and the exception in the block diagram.

  Thanks to a bouquet.

  -Chris

  Hello Chris,

  Based on the screenshot you provided, it looks like you use too many independent tasks in a single chassis - I think that the timing engine can handle three (four memory), but based on this knowledge basethree simultaneous HAVE tasks - you can certainly use all eight locations to HAVE, but they will need to be divided into synchronized subsets.

  That said, if it is in fact the problem is that I feel, a more specific error would appropriate the "resource" referred in the present case is ostensibly the timing engine, but further clarification would be useful.

  Best regards

• Snapshot failed because another task is underway

  Hello

  I use VCB to backup vm and has encountered a problem of snapshot. The log shows that "failed to create snapshot: operation failed because another task is in progress.

  Are someone knows it what it means and how to fix it?

  Here it is the log:

  Error: Another error occurred: failed to create snapshot: operation failed because another task is in progress.

  An error has occurred, cleaning...

  Deleted directory E:\VCBBackupRoot\CSGSGPKEXT04

  VM error: snapshot 'CSGSGPKEXT04' failed

  De : [email protected] time ' VM-csgsgpkext04-FS-all the days ': 2009-08-18 21:56:17

  Session remote exec script vmwarepreexec.cmd

  on the tkimxcvomc01.omcapj.adapps.hp.com host failed. Exit code = 1

  De : [email protected] time ' VM-csgsgpkext04-FS-all the days ': 2009-08-18 21:56:17

  None of the officers disc completed successfully.

  Session failed.

  Thanks in advance!

  LAN Lan

  I had this recently and I concluded that it was stuck create or was to create a snapshot of the thought. Try a:

  service mgmt-vmware restart

  on the virtual machine running on the host and if it is connected to a VirtualCenter / vCenter also try one

  service vmware-vpxa restart

  If the one doesn't fix it.

  Confirm also in the virtual machine folder that there no snapshots already there, if there is you will have to perhaps create and remove all snapshots after the serives are delivered to market as stated above.

• Always says that another installation is already in progress

  Hello

  I have a desktop computer with Windows 7 installed.  It seems to be hung on a facility that I can't finish.  This prevents me from doing other installs without going through a routine of Rube Goldberg.

  When I try to install a program, it stops and I get an error that says: "another installation is already in progress.  Complete it before you proceed with this installation. »

  If I go to the Windows Task Manager process.  There are always 2 copies of msiexec.exe running.  One has my username next to him.  The other has nothing beside him.  I can "Complete the process" on the version with my name next to him, but not others.

  Now, if I want to reach intall a program.  I close version of msiexec.exe with my username next to him.  Then I go into Services and disable Windows Installer.  Then I reboot.  Then I go into Services and back Windows Auto Installer.  Then I can install a program.  If I want to install another one, I have to go through the same routine of Rube Goldberg.

  Is it possible to get rid of this problem?

  Thank you

  James

  In the Registry Editor window, navigate to the following key:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress

  If this key exists, delete this key. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Whenever I try to open Mozilla Firefox I get the same message: he is already underway and open, and I have to close all other open all programs first in order to to use

  Whenever I try to open Mozilla Firefox I get the same message: he is already underway and open, and I have to close all other open all programs first in order to to use.  Problem is that I'm not running anywhere.   I checked my task manager, and is not in the applications or processes.  I tried to restart my computer a couple of times, correctly and a hard reset as well and nothing works.  Google Chrome and Internet Explorer are the two works very well.  Help, please.

  Original title: loading Firefox problem

  Hello

  I suggest that you are looking for or post on the Forums of Firefox.

  http://forums.mozillazine.org/viewforum.php?f=38

  Don

• Installer of Windows Vista. -Error message: "another installation is already in progress. That completes before proceeding with this installation. »

  When I go to open Word or PP files I get a message "another installation is already in progress. That completes before proceeding with this installation. "There is no other facility. I can't install the Vista updates either. I suspect a problem with windows Installer.

  marcus1145944z,

  Please post with the information requested here:what to post in the Windows Update forum
  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations ofKB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Photosmart 5514: HP Photosmart "in use with another task' error.

  I'm sure you're all sick to see these questions, but I have not found that a reliable solution among the responses presented anywhere else on the internet.

  I have a printer HP Photosmart 5514, part of the 5510 B111 d e-all-in-one printer series, and it currently only allow me to scan a single document (with multiple pages). I connected via USB, not the network connection. My current operating system is Windows 10, 64-bit. I've uninstalled and reinstalled the drivers several times, using different methods: a part of the HPSolutionsFramework, installation of the manual pilot on its own and even with the method of detection of device HP Support Assistant. I tried the most common answer of "unplug, restart the computer, plug in. I also tried printing HP and doctor Scan to see if there is a driver problem but it clears all controls and nothing seems to be wrong. To be clear, restarted my computer "solve" the problem, even temporarily and no is not a final solution to my problem.

  Explanation of the issue:

  I run the HP Photosmart 5510d series software and click on the button "scan a Photo Document or". When the window opens, I click on "scan document to the file" and proceed to scan my document with however many pages, adding each page I want. When I'm finished, I hit 'save', my backup file and click 'done '. When I proceed to scan another document, hit the button causes nothing happen but one his mistake. When I start printing HP and Scan doctor and trying to do an analysis of test after he tells me that everything is going well, I get the error message:

  "The HP scanning application is currently in use with another task or another user on this computer. Please wait until the other task is finished, and then try again. »

  To be quite clear, there is no other task that I'm aware of in addition to the fact that somehow the software does not seem to let go of the analysis. There are no other users who use the computer outside of me. There is no other hidden running application. I went through the Task Manager to kill all the associated HP process to see if something it stops to run again. The only chance I have is with my computer restarts, but it would be foolish to scan documents of mass and restart after each.

  It worked properly on my other hard drive with the same version of Windows 10 installed on it. 10 Windows installed on a new drive and it does not appear to want to work after 1 document.

  If anyone has a help in this case, it would be greatly appreciated.

  Hi @Yenroh,

  Welcome to the Forums of HP Support!

  I see that you are able to scan with your HP Photosmart 5514 printer wireless. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Generally speaking, the reason why you get "the HP scanning application is currently in use with another task or another user on this computer. Please wait until the other task is finished, and then try again. "is because that the network signal is lost the connection and the freezing of the task analysis or the previous scan operation never ended.

  Please, try the steps in these guides:

  • Scan network connection is lost (Windows)
  • "Scan cannot be performed because another program or computer uses the network device" message in Windows when scanning on a wireless network

  TIPS:

  • Move the printer and the router more closely in order to improve the quality of the signal.
  • Change the channel on the router wireless.

  Ensure that your router and firewall do not block these ports.

  • Scanning: The UDP port: 427 TCP ports: 9220, 9500

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Can not install the software as another installation is already install

  When I try to install new software, my computer says that it is already install something, but I'm not.  How can I find what the computer is installed so that I can cancel it and install the software, I need?

  Hello

  1. what software are you trying to install?

  I would say you can do clean start and then install the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I suggest you follow the steps indicated by twinklingsky as dated April 20, 2010 from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/another-installation-is-already-in-progress-error/3e84cba0-a4cb-4307-9a67-b506ebb105b3

• Deck CC: "photoshop is busy with another task.

  Still, when I try to launch a Photoshop CC I get this error message:

  "photoshop is busy with another task.

  Not true. Photoshop is not doing anything.

  Why am I always the error message. After I click on it to suite, the process continues without waiting. Why the holdup.

  How can I make this stop?

  Hi ocean

  Do you get this error when you open Photoshop Images of the bridge or when you run the Action in Photoshop?

  In addition, if the problem is with Bridge, please reset preferences Bridge:-press and hold the CTRL, ALT, Shift (Windows) Command, Option, Shift (MAC) during the start-up of bridge and make check on reset preferences and purge the cache, and then click Ok

  

  Let us know if this helps

  ~ Assani

  
  

• How to make the output of the task are an entry in another task

  How to connect the output of a task for I can use it as input for another task?  See this screen below: the task "Invoke the Script" run a PowerShell Script.  The task 'Send E-mail' send an email.  The two tasks work separately.  How can I get the results of my powerShell script that I can use them as content of the task 'Send Email'?

  

  On the script invoke task you set the attributes of output containing the results of powershell.

  to do this, select the output tab and use an object name that was put in place in powershell results as in the data

  You may need to format, this results in a recognized VMware object I guess in your case it is a string type.

  and then select the e-mail task, select the task from email, click on the small eye looking for icon "view details".

  Select the Visual link

  Select the attributes you setup from the output of the previous task and hang it in the input parameters of the task to email.

  fact

• Another parent window already exists for this section

  Hi people, I'm some workflows (GSM and NDP) increment in my case, unfortunately after that I created these workflow I am confronted with many questions. The most common problem happens when I go to a new stage, I get the message: "another parent window already exists for this section.
  In other cases I get messages like this:
  
  Server error in ' / NDP ' Application.
  --------------------------------------------------------------------------------
  
  Exception of type 'Xeno.Web.UI.BusinessObjectUIService.BusinessObjectUIManagerNotFoundException' was thrown.
  Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and its origin in the code.
  
  Exception details: Xeno.Web.UI.BusinessObjectUIService.BusinessObjectUIManagerNotFoundException: Exception of type 'Xeno.Web.UI.BusinessObjectUIService.BusinessObjectUIManagerNotFoundException' was thrown.
  
  Source error:
  
  An unhandled exception is generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception below stack trace.
  
  Stack trace:
  
  [BusinessObjectUIManagerNotFoundException: Exception of type 'Xeno.Web.UI.BusinessObjectUIService.BusinessObjectUIManagerNotFoundException' was thrown.]
  Xeno.Web.UI.BusinessObjectUIService.BusinessObjectUIService.get_Item (String businessObjectUIMgrId) + 190
  Xeno.Prodika.NPD.WebUI.Activity.ActivityLinearWorkflowDataSource.setParams (StringSplitter ss) + 101
  Xeno.Prodika.Common.ClassProtocolHandler.intializeObject (Object obj, StringSplitter splitter, ObjectArgs args) + 68
  Xeno.Prodika.Common.ClassProtocolHandler.Internal_CreateObject (String name, ObjectArgs args) + 310
  Xeno.Prodika.Common.ClassProtocolHandler.CreateObject (String name) + 11
  Xeno.Prodika.Common.ObjectLoader.createObject (String name) + 64
  Xeno.Web.UI.Common.Popups.LinearWorkflowActionPopup.OnInit (EventArgs e) + 64
  System.Web.UI.Control.InitRecursive (Control namingContainer) + 333
  System.Web.UI.Page.ProcessRequestMain (Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) + 378
  --------------------------------------------------------------------------------
  Version information: Microsoft .NET Framework Version: 2.0.50727.3053; ASP.NET Version: 2.0.50727.3053
  
  Carlos

  It is also in the installation/upgrade guide, so that you can more details here. However, the string connection Oracle differs from MSSQL and must not contain a server variable.

  Sample Oracle connectstring: "User Id = PLM; Password = password; Data Source = TNS_SOURCE1; »
  sample MSSQL connectstring: "server = localhost; UID = sa; pwd = password; database = prodikaDB ".

  hope that helps.

• another application is already installed.

  Hello

  This is my first post here

  I find I can not install air application and also I can not uninstall my air whenever I try to do thoes this error:

  Adobe AIR could not be installed because another application is already installed. Complete the first installation before proceeding with this one.

  but I didn't know the other I think that there is not another application

  I deleted the folder of air but now when I want to install air I met this error!

  Please tell me what shoul I do

  Hello

  I'm sorry that you run on this issue.  I guess you tried rebooting your system?  If so, and the problem persists please try the steps listed in this document:

  Could not load the software

  Please let me know how it goes.  If the steps above do not work, you need to gather AIR consignment of information that will give us a better look at what exactly a failure.

  Thank you

  Chris

• Cannot start Explorer from the Task Manager shell, if another program is already specified as shell.

  Hey people.
  The company that I work uses Windows XP to run some software owners. Our software is configured to run as nt\currentversion\winlogon\ HKLM\microsoft\windows shell shell. I tried setting the shell two our product and random software like messenger or just the C drive, and every time when you use "run" of the Task Manager to open the explorer.exe shell, my documents will be opened instead of other things.
  It will open my documents instead of the shell until I have two close open windows, excluded the Task Manager and set the entrance to Shell back to "Explorer.exe".
  This problem persists between the platforms, and I've tried everything I can think of.
  Any help will be great.

  Hello

  Your Windows 7 is better suited for the public IT Pro on TechNet since your computer is on a domain network. You can follow the link to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

• Add Hardware is already underway to install another element, but it is not!

  I'm trying to re - install a webcam, coz the laptop crash, the webcam works fine, the software is installed, but the system says that no webcam is present, but if I go to add hardware, I get a response that his already install something and that you can not install 2 things at the same time. don't know how to clear the material! any help pls?

  Hi, tks for your reply, I already tried this b4! I fixed it by returning to the plant costs and all reloading!