Default configuration of the features of Windows, reverting changes

Similar Questions

• What happened with the right button of the feature in Windows 7 (for file Explorer, Office aps, etc.)

  Click right feature has been removed from Windows 7.  I tried the upgrades of Windows 10 twice and had to go back to Windows 7.  Now MS is the removal of the features of Windows 7.  They do not meet requests for information about this either.

  Sorry to bother everyone on the right click.  It was due to a problem with the mouse.  I have concluded that, when the old mouse would not work under remote connection to my Windows XP system. I found another mouse that works very well for all of my operating systems.

  Thank you.

• Impossible to change the features of windows? Help!

  I can't make changes to the features of windows that I just get this error message "an error has occurred. Not all features have been changed successfully.

  Hello FrankSwaby,

  Are you able to connect to another user account and duplicate this problem?  Did you always have this problem or it's recently started where you can't make changes to feature Windows?  Have you been able to reproduce this problem in a clean boot?

  New user account:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

   To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• Media Center missing completely Windows 7 even after turning on and the features of windows

  Media Center Windows 7 even completely missing after switch on and the features of windows.  windows edition version 64-bit home premium

  Do you have Windows Media Center on this installation of Windows 7?

  You have Windows 7 Edition home premium N which does not come with all the features of the Home Premium edition standard media? Please see:

  http://windows.microsoft.com/en-GB/windows7/products/What-is-Windows-7-N-edition .

  If you think that you should have it, try:

  1. open Windows Explorer (not Internet Explorer) and navigate to the folder:

  C:\Windows\ehome\

  2. search for a file named ehshell.exe (which is the executable for Windows Media Center file). If its there, you can just click on and select Pin to TaskBar or Start Menu, etc.

• How can I change the login email address and access to the features of Windows 8?

  Original title: I accidentally entered a wrong email across to the top of the upgrade to windows 8 and now I can't access all the features of windows 8.

  When you install the upgrade for windows 8 he asked for my email address.  I misspelled my domain name, which causes it have instructions or messages will in the vast desert of never never land.  I need to check my email to make the apps work, but given that the email is valid I can't do that.  I need to know how to change the login email address in windows 8 so that I can go ahead and verify my account.

  Hi I also had this problem but I have used the local account and was able to access all applications with my correct email. I hope this helps!

• How to reset the default configuration for the ATG Applications layer

  Hi all
  
  If we change the properties through the ACC files, they will be copied to default configuration (localconfig) layers. If I have several servers how can change the default configuration in the directory someother layer in my file system.
  
  
  Thank you
  Neya

  Create the CONFIG.properties in the configuration layer where you need ACCESS to make the changes.
  defaultForUpdates = true

  Peace
  Shaik

• How to get the configuration of the feature for UIMap value?

  Hi all
  Right now, I do a function that needs to get the value of configuration of the feature for the UIMap, anyone have the solution for this or is it just imppssible?

  You can get the values of business Invoking 'Base' = "C1-GetFeatureConfiguration" and then call the user interface mapping, where the BS is included.

• Default password for the root has not been changed... but there.

  I have a problem with a server ESXi in VCenter which reported that following:

  Configuration problems

  The default password for the root user has not changed.

  However, on the server, we changed the default password to our standard from the console. Is there something that needs to be done to update VCenter to check or something? It marks the host as a warning so it is certainly misleading people.

  
  Thank you.

  Hello and welcome to the Forums!

  If the ESXi host is empty, a reboot will probably clear the message.  In addition, to restart the management agents would probably erase as well.

• Default configuration of the windows features. Restoration of the changes. Do not turn off your computer... HEEELLLPP!

  After restart my Asus X55oE due to necessary updates, I got «default configure features windows.» Restoration of the changes. Do not turn off your computer. After reading several messages through other forums, I turned it and then turn again only to receive the same screen. Some of these forums say that it can take 2 hours or more because of so many updates made at the same time. I think I was trying to upgrade windows 8 for windows 8.1.

  I'm really worried about it just because I just got back this PC from ASUS and am needing to work. Can someone tell me if there are other options or make sure that it just take a while? I also read that you can actually go to the control panel > windows update > help to erase mistakes. Also, someone said that you can customize the number of updates at a time can be both. I certainly do not happen again. Help would be greatly appreciated. Thank you in advance!

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand you have questions while, Windows 8.1 in the computer installation.  We are happy to help you in the matter of fixing.

  You can try to follow these suggestions mentioned in the Microsoft article below to solve the problem with the installation of Windows 8.1 because Windows 8.1 is also an update for Windows 8 and these suggestions would help you with the same.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358/en-us

  Note: refer to "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If this does not help then, try to disable anti-virus and see if that helps.

  Disable the anti-virus software

  (Also applies to Windows 8 and 8.1 of widows)

  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-7

  Note : Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Default configuration of the Windows, restore features changes, do not turn off your computer error/loop - failed to get on the desktop

  Hi, I restored my Toshiba laptop yesterday afternoon, this morning, when I turned it on it started to configure the updates and let him be like that so I made breakfast.

  When I came back, I found this saying ' failure set features Windows restore changes do not turn off your computer ' its been like that for about 10 hours.

  I wonder how can I fix? I tried it turn on and turn off, but the same problem persists.

  It came with 8 Windows preinstalled thereforeI don't have the installation disk and I don't have access to the desktop

  Any solution please?

  Thank you

  Hello

  I'll get you the link and restore your computer to a previous working state.

  http://support.Microsoft.com/kb/949358/en-us

  Please reply with the status.

• Default configuration of the windows updates. returning from changes. do not turn off your computer. (Infinite loop)

  Problem:

  • Computer: Lenovo N580
  • Windows 8
  • Reset my computer to factory reset
  • All my files uploaded to the computer
  • Launched about 120 windows updates
  • Now, the computer is stuck on the blue screen with the message that seems to never go "failed windows update Setup. returning from changes. do not turn off your computer"I can't access the login screen or any screen to disable the windows update.
  • I tried the solutions posted by other users with the same problem but without success.
  • Please help me with a solution where I don't have a factory reset because I don't have another copy of all my files!
  • Also, is there a way to access a safe mode on Windows 8? I tried F8 or SHIFT + F8 after starting, but nothing happens. I read a post online where Windows 8 have removed this feature. Is there another way?
  • Help, please! I AM ETERNALLY GRATEFUL!
  • THANKS IN ADVANCE!

  See: http://support2.microsoft.com/kb/949358/en-us (run a system restore)

  Perform the system restore from the recovery of Windows and check.

  (a) once you start your computer by using the Windows DVD or disc repair system, a black screen is displayed with the gray text "press any key to start from the CD or DVD. Press a button on any.

  (b) select the correct time and type keyboard.

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting in choose an option screen.

  (e) click Advanced options in the form of resolution of the problems.

  (f) select System Restore.

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Reference link:

  How to refresh, reset or restore your PC.
  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  If you don't have disc to install Windows or the system repair disc, contact the manufacturer of the computer.

  You can also refer to:

  How to create the installation media for a PC refresh or reset:
  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• How I don't know what to turn on or off in the features of windows Vista

  I'm going nutz! I tried to watch each of them one by one, but I did not understand what was the meaning. What boxes should be checked and those that should not. Some sites say the index box must be marked, and some say it should not. What I'm doing.

  Thank you for your time,

  K

  Hello

  the link below is a complete list windows features are normally turned on and turned off by default and what they serve

  Table of contents

  1. Introduction
  2. How to enable or disable Windows Vista features
  3. Windows Vista features list
  4. Conclusion

  http://www.bleepingcomputer.com/tutorials/tutorial134.html

• I get the error message as the configuration of the updates in Windows Vista.

  Title: aid to configuring updates

  Windows Vista does not start, it keeps configuration updates, closes and then opens the configuration of updates still once he did this for 4 hours now

  pressing Ctrl alt del does nothing... Please help

  Hello
  You can follow the procedure in the article.
  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

• Default configuration of the PFS on the Cisco ISR

  Hello

  I want to learn more about the default configuration of PFS on the Cisco ISR router.

  -Introduction to IP Security (IPSec) encryption - create a Crypto map
  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_tech_note09186a0080094203.shtml#cryptomap

  You can also change the configuration of your PFS here. PFS Group1 is the default value in this example. You can change the PFS to group2, or turn off all together, you should not do.

  DT3-45 a (config) #crypto card armadillo 10 ipsec-isakmp
  DT3 - 45's (config-crypto-map) #set counterpart 192.168.10.38
  DT3 - 45 session key has seconds (config-crypto-map) #set 4000
  DT3 - 45's (config-crypto-map) #set transform-set HAAT PapaBear BabyBear
  DT3 - 45's (config-crypto-map) #match address 101
  --------

  This example has no configuration PFS PFS is set to group1.
  However, the following command reference indicates that PFS is not requested.
  Which is the correct description for the PFS setting?

  -the pfs value
  http://www.Cisco.com/en/us/docs/iOS/Security/command/reference/sec_s2.html#wp1063163

  Default values
  By default, it is not required of PFS. If no group is specified with this command, the Group1 keyword is used by default.
  -------

  Thank you for your cooperation in advance.

  Order is correct.

  If pfs set is not configured in the crypto map configuration, pfs will be negotiated not.

  If set pfs is configured without any group, then it uses default group1

  And if you do not want to use the other group, you set the group # in the command set pfs.

  I hope it is clear now.

• FDM 11.1.2.1 & for the configuration of the Essbase on Windows 64-bit adapter

  Hi all
  I had a few doubts with the configuration of the adapter Essbase for FDM ver.11.1.2.1 on X 64 Windows environment:
  
  (1) with version 11.1.2.1, Essbase adapter upsES11GXH for FDM needs more user and Arborpath system variables. Is this correct? This is clearly mentioned in the es_g4_h_target_adapter_readme of the document of the essbase adapter available on Oracle's Web site. It asks you to delete the Arborpath if you upgrade from version 11.1.2.0 to 11.1.2.1. If you are doing a new installation the document does not claim anywhere to set the Arborpath environment variable. Version 11.1.2 necessary both the Essbasepath and the Arborpath variable must be set to < EPM_HOME > \products\Essbase\EssbaseClient-32. 11.1.2.1 version the Essbasepath must be \common\EssbaseRTC\11.1.2.0 < EPM_ORACLE_HOME >
  
  (2) I read some - where in the forum for FDM work on a x 64 windows the essmsh.exe environment should start and appear in the Manager of tasks such as essmsh.exe * 32. I tried booting from the < EPM_ORACLE_HOME > \common\EssbaseRTC folder and it gave me an error "failed to initialize MaxL. If I start from the \products\\Essbase\EssbaseClient-32 < EPM_ORACLE_HOME > MaxL shell it seems to work correctly. I am able to start the MaxL shell and I am also able to see essmsh.exe * 32 in my task manager process. What is the logic behind this?
  
  (3) in the case of question 2, if you open the startMaxL.cmd file in a text editor, you see a line that says "SET ARBORPATH = % ESSBASEPATH %". Then Arborpath or not not to start maxL shell and what is the relevance of this with FDM?
  
  (3) is the \products\\Essbase\EssbaseClient-32 irrelevant in 11.1.2.1 version as the ESSBASEPATH should be set to < EPM_ORACLE_HOME > < EPM_ORACLE_HOME > (folder or path) \common\EssbaseRTC\11.1.2.0. The esbapin.dll is located in the bin folder of this path.

  (1) with version 11.1.2.1, Essbase adapter upsES11GXH for FDM needs more user and Arborpath system variables. Is this correct?

  YES, that's correct. You don't need of the system ARBROPATH or early variable user with 11.1.2.1

  This is clearly mentioned in the es_g4_h_target_adapter_readme of the document of the essbase adapter available on Oracle's Web site. It asks you to delete the Arborpath if you upgrade from version 11.1.2.0 to 11.1.2.1. If you are doing a new installation the document does not claim anywhere to set the Arborpath environment variable. Version 11.1.2 necessary both the Essbasepath and the Arborpath variable must be set to \products\Essbase\EssbaseClient-32. 11.1.2.1 version the Essbasepath must be \common\EssbaseRTC\11.1.2.0

  REASON, 11.1.2.1 you only need the ESSBASEPATH variable that will point to the directory EssbaseRTC\11.1.2.0 as stated in the Readme adapter guide.

  (2) I read some - where in the forum for FDM work on a x 64 windows the essmsh.exe environment should start and appear in the Manager of tasks such as essmsh.exe * 32. I tried booting from the \common\EssbaseRTC folder and it gave me an error "failed to initialize MaxL. If I go to the \products\\Essbase\EssbaseClient-32 MaxL shell, it seems to work correctly. I am able to start the MaxL shell and I am also able to see essmsh.exe * 32 in my task manager process. What is the logic behind this?

  It's something that you can use to test if the environment variables are configured correctly. IF you follow the adapter Essbase readme explicitly regarding changes in variable environment, the integration works as expected.

  (3) in the case of question 2, if you open the startMaxL.cmd file in a text editor, you see a line that says "SET ARBORPATH = % ESSBASEPATH %". Then Arborpath or not not to start maxL shell and what is the relevance of this with FDM?

  See the answer to #2

  (3) the \products\\Essbase\EssbaseClient-32 (folder or path) is not relevant in the 11.1.2.1 version as the ESSBASEPATH should be set to \common\EssbaseRTC\11.1.2.0. The esbapin.dll is located in the bin folder of this path.

  Yes, this path must be defined in the PATH variable. It is documented in the readme adapter guide.