Default deployment political fencing for virtual models

Similar Questions

• Specify the audio hardware of the default Mac as material for virtual Windows machine

  I have a 2.8 Ghz Core 2 Duo iMac Leopard 10.5.4 Fusion 2.0.1 (recently updated to 1.x) running.  I have an audio interface Firewire (Focusrite Saffire) that I use as my primary audio device for the Mac.  Fusion is used as the audio device that broadcast the Windows.  I want to clarify that Fusion using the internal audio device to the iMac as device Windows plays through.  Is this possible?  The virtual machine settings indicate only that the default audio device as shown in my system preferences will be used by the merger.  Is there a setting in a .vmx file, which can be set to replace?  Thanks in advance.

  Fusion uses virtual hardware, it will use all default hardware Mac configured in the Mac system. You cannot assign all additional devices to the Virtual Machine.

  Kind regards

  Silica V.

• API call for the deployment of computer virtual model?

  Hi all

  Could someone tell me how to deploy a virtual model computer using vsphere sdk webservice with the names of methods?

  Thanks in advance

  You use the method CloneVM_Task() (http://www.vmware.com/support/developer/vc-sdk/visdk41pubs/ApiReference/vim.VirtualMachine.html#clone)

  You're going to treat it just like the deployment of a model non - VM, the only difference is that the model has a property that marks it as a model if you can not make any changes or it turn, but essentially a virtual computer model is identical to a virtual machine. Simply locate your model VM mor and pass while in the clone, spec and deploy as you normally would.

• customization error "Sysprep is not installed on the server of virtual center for the model you have selected.

  Hi all

  Need your help with customization of the script here is the steps I've done so far

  1.I have created a virtual machine with Windows XP Professional as the operating system installed VMware Tools / VMware view agent then I added the virtual machine to the domain and created a template called (winXPtemp)

  2. According to article http://www.VMware.com/support/VC/doc/c12prepcustomize.html#1030366 I downloaded the Q257813_w2k_spl_x86_en.exe and the same extract. I force my VC server find the path as mentioned in article

  C:\ [VirtualCenter_installation_directory]\resources\windows\sysprep\1.1 so copied the files extracted to the location C:\Program Files\VMware\Infrastructure\VirtualCenter Server\resources\windows

  3 then I copied and extracted the file \support\tools\deploy.cab on the windows 2003 CD and copied the sysprep files extracted to the following location on the VC Server

  C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\xp

  4. After you have done that, I've created a script under customization script called "testsript".

  5 Note until now I have not created a pool of resources as requires it the deployment of only 4 VM on an ESX Server with script customization. The data store for the virtual machine is a 100 GB LUN from a 2050 of FAS of NetApp iSCSI

  6. now when I create an automatic pool when I select the script that I created in step 4, and then click then it gives me an error "Sysprep is not installed on the server of virtual center for the model you have selected. Sysprep on the server installation.

  Troubleshooting done by me:

  I have readded the VC Server Manager to view but it force worked

  Thanks in advance for your help

  Kind regards

  v

  If I remember correctly the location for XP should go to: C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\xp

  For XP SP2 Sysprep files can be downloaded from the Microsoft site and are called

  Windows XP SP2 deployment tools

  The article you linked was VirtualCenter 1.x. Since you have given a version number of VirtualCenter I assumed it was 2.x or later.

  ----

• What is the type of object to use for virtual machine model in the Points of Extension?

  Hello

  I added my plugin point of extension vsphere.core. ${objectType} .monitorViews. My plugin is for all types of objects (vm, file, vApp, resourcePool, etc) except the model of the virtual machine. My understanding is that the vm object type would be required for the virtual machine template, but that doesn't seem to be the case. Am I missing something here? Should the plugin appear for the model of the virtual machine when I use the vsphere.core.vm.monitorViews extension point?

  Thanks in advance.

  Kind regards

  Ashutosh

  Sorry, I got confused by your original question. ExtensionPoint id you are looking for is the one for adding views a model virtual machine monitor tab:

  model.monitorViews vSphere.Core.

• Photosmart C4795 on fall back on the deployment of Airprint for 2011 schedule?

  Hello:

  I recently bought the printer Photosmart C4795 wireless in September or October 2010. It is not on the deployment schedule of Airprint for 2010 on the PDF on HP support.

  Would you know if The Photosmart C4795 wireless printer will be on a schedule of deployment of Airprint for 2011 or internal parts rely before the deadline of compatibility?

  I want to upgrade this printer to be Airprint compatible.

  Thank you!

  Ziffel

  One of the main requirements for Airprint is the must have ePrint printer.  I do not see the C4795 on ePrint models list, so it will not work with Airprint.

  Another solution is HP iPrint, it allows to print Apple portable devices via a 802.11 wireless connection.

  Here is a link to a document iPrint, it will show you how to get HP iPrint.

  http://support.HP.com/us-en/document/c01616126

• Windows 7 Upgrade Guide for dv2000 models

  Statement:

  You use this guide at your own risk. I take no responsibility for any problem.

  Things you need to know and do before the upgrade:

  1 HP may require that reinstall you Vista back if you have hardware problems to solve the.

  2 HP will not help you if you have software problems because these models do not have their support

  with Windows 7 system.

  3. before you upgrade to Windows 7 will make it please Vista Recovery CD/DVD. How all the information here.

  4. all drivers for Vista and preinstalled by HP software for your model are in the folder in C:\swsetup .

  If you still have on your HARD drive, then copy this folder on a CD/DVD. You may need them one day.

  5. users with AMD processors have indicated that their models dv2000 were very quickly overheated after installation

  Windows 7. So if you want to install this system and you have this processor to remember about this and be hypersensitive

  on this issue.

  How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

  To do this use HWMonitor (free and recommended) or Aida64.

  CherylG (one of the best HP forum contributors who has model dv2000) has solved this problem by installing Windows

  Updates.

  Resources:

  How to install Windows updates

  6 If your model has nVidia graphics card then please check how high temperature this device possesses under

  Vista. In this way you will know is it works fine under Windows 7 also.

  CHIPSET DRIVERS

  Solution on COPROCESSOR with yellow exclamation mark () 

  If you have Intel processor:

  Intel chipset (Install and reboot before other drivers) here (version 9.1.1.1025 for 32/64-bit Win7)

  Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64-bit Win7) 

  If you have an AMD processor:

  nVidia Chipset (Install and reboot before other drivers) here (Vista)

  Important information for users with nVidia chipset!

  If you have 4 GB RAM or more, then read the article Microsoft Knowledge base on the solution of certain problems that you may have here.

  GRAPHICS DRIVERS

  Intel graphics:

  Inte l 950 and Intel X 3100 here (version 15.12.75.4.1930 for Win7 32 bit) or here (version 15.12.75.4.1930 for Win7 64 bit)

  nVidia Chart: 

  Important information!

  If you have installed all the drivers for graphics card nVidia, then before you install either version, you will need

  first of all to remove old drivers from your system. Check below how guide do (that's not standard

  ( uninstall process) :

  How to remove drivers Windows system nVidia graphics.

  Drivers:

  nVidia GeForce 8400 M GS:

  OPTION 1
  

  267.76 version here for Windows 7 32 bit or here for Windows 7 64-bit.

  OPTION 2

  Version 197.16 here for Windows 7 32 bit or here for Windows 7 64-bit.

  Note:

  Don't forget to first uninstall previous graphics driver.

  nVidia GeForce GO 6150 7150 M, 7200 M:

  OPTION 1

  First try installing the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  OPTION 2
  

  If the drivers will not work so try modded drivers worm 195.81.

  Note:

  Don't forget to first uninstall previous graphics driver.

  How to install Windows 7?

  1. download driver here (for 32-bit Win7) or here (for Win7 64 bit) double click and select extract,

  2 download from this site with the drivers also modified INF and replace original INF in extracted folder,.

  3 install and reboot.

  OPTION 3

  Last thing you can do is install graphic driver from Windows Update.

  Note:

  Don't forget to first uninstall previous graphics driver.

  1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

  Windows Update '.

  2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

  for your computer.

  3select the " optional updates " and install from there only driver for your graphics card.

  AUDIO DRIVERS

  Conexant HD Audio

  Use the Vista drivers for your model.

  Resources:

  How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?

  MODEM DRIVERS

  Conexant Modem here (A worm 7.61.0.0) (Vista) - If you have the sound card Conexant

  HP QUICK PLAY 

  HP QuickPlay here (ver 3.7 v.6112 for 32/64-bit Win7)

  Notes:

  • It must be installed before HP Quick Launch Buttons.
  • You have installed this software and it crashes when you use?

  Uninstall your current version of HP QUICK PLAY and install what you had in Vista.

  Resources:

  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  If you've burned CD/DVD with C:\swsetup folder as proposed in the guide then you will find it.

  HP Quick Launch buttons

  Solution on KEYBOARD FILTER with yellow exclamation mark ()  

  HP Quick Launch buttons here (ver 6.50.13.1 for 32/64-bit Win7)

  WIRELESS DRIVERS

  Intel Wireless here (ver 13.0.0.107 for 32/64-bit Win7)

  Broadcom wireless here (ver 5.60.48.35 for 32/64-bit Win7)

  Atheros Wireless here (ver 8.0.0.316 for 32/64-bit Win7)

  HP wireless Assistant here (ver 3.50.12.1 for 32/64-bit Win7)

  Bluetooth wireless here (ver 6.5.0.2000 for 32/64-bit Win7) only for models with Bluetooth.

  Note:

  How to install the Bluetooth driver?

  Click on the link below:

  How to install the driver Bluetooth HP Windows 7.

  ETHERNET DRIVERS

  Marvell Yukon 88E8039 Lan here (ver 10.70.5.3 for 32/64-bit Win7) only for models with Intel processor.

  Models with AMD processors need not install any additional Ethernet file, because the drivers for it are in the chipset package.

  CARD READER

  Solution on BASE SYSTEM DEVICE with yellow exclamation mark () 

  Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)

  TOUCHPAD DRIVER

  Synaptics TouchPad here (ver 16.0.1.0 for 32/64-bit Win7)

  Note:

  Default is activated the scroll two - finger. If you want to use a finger to scroll, check out the link below:

  How to change two - finger scrolling on One - Finger scrolling in Synaptics TouchPad software.

  Alps TouchPad

  Install driver through Windows Update:

  1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '

  Windows Update '.

  2in the left pane, click " check for updates " and then wait while Windows searches the latest updates

  for your computer.

  3select the " optional updates " and install from there only driver for Alps TouchPad.

  ONLY IF YOUR MODEL: WEBCAM 

  CyberLink YouCam here (ver 2.0.3115 for 32/64-bit Win7)

  Note:

  If you have a problem with your webcam, check below links to HP documents:

  Solve Webcam Windows problems

  Test a Webcam using your favorite Instant Messaging

  3VRX (optional software)
  

  on the screen the images and associated sounds that are displayed and heard when volume control

  3VRX here (version 2.5 for 32/64-bit Win7)

  Note:

  Here is YouTube video that shows what you can do with this software.

  ONLY IF YOUR MODEL HAS: FINGERPRINTS READER
  

  1. uninstall all software and previous fingerprint reader drivers

  Check below how guide (only it's non-standard uninstall process):

  How do I uninstall the driver and the AuthenTec fingerprint software

  2 you can install now correct fingeprint reader driver and software.

  There are two apps that are available on this device:

  - AuthenTec TrueSuite

  and

  -DigitalPersona Personal (recommended).

  Information on how to install the software you will find below guides:

  AuthenTec TrueSuite, fingerprint AuthenTec and Windows 7

  DigitalPersona Personal fingerprint AuthenTec and Windows 7

  ONLY IF YOUR MODEL: DVD PLAYER WITH LIGHTSCRIBE

  How can you check is your DVD with Lightscribe drive?

  The Panel of DVD, there will be a Lightscribe logo.

  

  LightScribe Host software here (ver 1.18.22.2 for 32/64-bit Win7)

  Report of the changes that have been made in the guide

  Edited the 16/01/2010 updated Synaptics TouchPad driver to ver 14.0.3.1, update Broadcom driver to ver 5.60.18.41

  Edited the 18/01/2010 updated nVidia Graphic article. Adding drivers for nVidia GeForce 8400 M GS (version 195.62)

  Published the 19/01/2010 updated LightScribe software 1.18.10.2 worm host

  Edited drivers fingerprints of 02/05/2010 update, software and added guides to fingerprints.

  Published the 2010-02-27 updated LightScribe Host at worm 1.18.11.1 software

  Published the 03/03/2010 update HP Quick Launch Buttons to worm 6.50.13.1

  Published the 03/20/2010 updated Synaptics TouchPad to worm 15.0.9.0 (this version allows multitouch gestures)

  Published two guides added 21/03/2010. How to remove drivers Windows system nVidia graphics and how to install the HP Bluetooth driver in

  Windows 7.

  Published the 03/25/2010 updated LightScribe Host at worm 1.18.12.1 software

  Changed name Intel Matrix Storage Manager published 26/03/2010 to the Intel Rapid Storage Technology technology, has added Intel Rapid Storage Technology

  worm 9.6.0.1014

  Graphic editing section of 31/03/2010 update nVidia with uninstall guide, updated drivers for nVidia GeForce 8400 M GS to worm 197.16

  Published the 04/10/2010 updated LightScribe Host at worm 1.18.13.1 software

  Published the 05/04/2010 updated LightScribe Host at worm 1.18.14.1 software

  Published the 05/05/2010 updated Synaptics TouchPad driver to ver 15.0.13.0, updated HP QuickPlay for ver 3.7 v.6112

  Published 21/05/2010 Update for ver 5.60.48.35 Bradcom, Atheros wireless to worm 8.0.0.316 update, update Synaptics touchpad wireless

  15.0.13.3 worm

  Edited the 24/05/2010 update HP Wireless Assistant to worm 3.50.11.2

  Published 24/06/2010 updated published 14/12/2011 updated Intel® Rapid Storage Technology driver

  Published 30/07/2010 update Broadcom wireless - the same version but with a few improvements, HP Wireless Assistant updated to ver 3.50.12.1

  Drivers added edited 04/01/2011 for nVidia GeForce 8400 M GS (ver. 267.76)

  Published the 04/02/2011 update software LightScribe Host at worm 1.18.22.2, added a guide: how to change two - finger scrolling on One - Finger

  Scrolling in Synaptics TouchPad software.

  Published driver update 12/14/2011 for technology Intel® Rapid Storage Technology

  Published 05/07/2012 updated driver for HP Bluetooth worm 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, updated guide: how to install

  Driver HP Bluetooth Windows 7

• Create subfolder under virtual & model computers

  I like the script to create folders for Virtual Machines and the model display. To the i in this moment completely chaos.

  This code makes it easy as a starting point.

  http://communities.VMware.com/message/1107441#1107441

  But if I create subfolders that whenever the message folder already exists appears as a red event.

  root folder / sub-folder / under file / under folder / sub-folder

  Main record office

  DC/location/environment/infrastructure/desktop/departments01

  Server main folder

  DC/location/environment/infrastructure/server/departments01

  DC/location/environment/infrastructure/server/departments02

  DC/location/environment/infrastructure/server/departments03

  DC/location/environment/infrastructure/server/departments04

  I did a PowerCLI-New-BlueFolderByPath function, allowing you to create folders for you. You must specify the path to the full in the service folder, as you can see in the example. The function will create all the folders (sub-) that do not already exist.

  function New-BlueFolderByPath {
  <#
  .SYNOPSIS
      Creates a new blue folder in the Virtual Machines & Template View
  .DESCRIPTION
      Creates a new blue folder in the Virtual Machines & Template View
  .PARAMETER Path
      Specify the folder path.
  .PARAMETER Server
      One or more vSphere servers to apply the command on.
      If no value is given to this parameter, the command runs on the server currently specified in the
      $DefaultVIServer variable.
  .OUTPUTS
      FolderImpl
  .EXAMPLE
      New-BlueFolderByPath -Path dc/location/environment/infrastructure/desktop/departments01 -Datacenter Datacenter1 -Server vCenter1
      This command will create a FolderImpl object for the folder with path
      dc/location/environment/infrastructure/desktop/departments01 in Datacenter1 on vCenter Server vCenter1.
  #>
  
    param([Parameter(Mandatory=$true)] [string] $Path,
          [Parameter(Mandatory=$true)] $Datacenter,
          [VMware.VimAutomation.ViCore.Impl.V1.VIServerImpl[]] $Server=$DefaultVIServer)
  
    $Datacenter = Get-Datacenter $Datacenter
    $Folder = Get-Folder -Name vm -Location $Datacenter
    $Path.Split('/') | ForEach-Object {
      if ($Folder) {
          $SubFolder = Get-Inventory -Name $_ -Location $Folder -NoRecursion -Server $Server 2> $null
      }
      else {
          $SubFolder = Get-Inventory -Name $_ -NoRecursion -Server $Server 2> $null
      }
      if (-not $SubFolder) {
        $SubFolder = New-Folder -Name $_ -Location $Folder -Server $Server 2> $null
      }
      $Folder = $SubFolder
    }
    $Folder
  }
  
  New-BlueFolderByPath -Path dc/location/environment/infrastructure/desktop/departments01 -Datacenter Datacenter1
  New-BlueFolderByPath -Path dc/location/environment/infrastructure/server/departments01  -Datacenter Datacenter1
  New-BlueFolderByPath -Path dc/location/environment/infrastructure/server/departments02  -Datacenter Datacenter1
  New-BlueFolderByPath -Path dc/location/environment/infrastructure/server/departments03  -Datacenter Datacenter1
  New-BlueFolderByPath -Path dc/location/environment/infrastructure/server/departments04  -Datacenter Datacenter1
  

  Best regards, Robert

• How to deploy a VM from a model of Orchestrator

  Hey,.

  How to deploy a VM from a model using a technique of customization or launch a script customization on a Linux host via Orchestrator?  The JavaScript function not seem obvious to do this so a little code examples would be nice. Also, if I try to do using a PlugIn what are my rights of authentication?  The same as the logged-on user?

  Kind regards

  ~ Patrick

  Don't forget if the answers help you, award points

  To delpoy a virtual machine from a template use the Clone VM workflows. You can use a workflow clone with or without customization. Orchestrator, computers point of view virtual and models are pretty the same objects

• Can dynamically create you index rules or virtual models in plsql?

  I am writing a plsql utility that loads data into a new model in offline mode. Once the load is complete, I need to create a new index of rules based on the definition of an index of existing rules. Once this is done, I need then to drop my virtual model existing and re-create it to include the new model I just loaded. I realize I could hardcode the two statements created in my plsql but I rather dynamically build lists of types "sem_apis.create_entailment" and "sem_apis.create_virtual_model" so that I don't have to change the code every time that I add new models to my environment (i.e. with this feature, I can add new models to the index of the rule and vitual manually models and my load utility would automatically include) in the next run of load).
  
  How can I pass the list of templates in each of these APIs? The documentation states that both accept a parameter of "models_in" of type SEM_MODELS, to whom he explains has a definition of TABLE OF VARCHAR2 (25).
  
  I created variables of types said in my utility and initialized them valid with models. However, whenever I try to run the API in my plsql using these variables, I get the following error:
  
  PLS-00306: wrong number or types of arguments in the call to 'CREATE_VIRTUAL_MODEL '.
  
  I have attached the sample code below:
  
  declare
  Model_T. ARRAY TYPE IS VARCHAR2 (25);
  model_list model_T;
  Start
  model_list: = model_T ('M1', 'M2');
  for me in model_list.first... loop of model_list. Last
  dbms_output.put_line (i: ' = ': model_list (i));
  end loop;
  sem_apis.create_virtual_model ('m12_NEW', model_list);
  end;
  /
  
  
  Has anyone successfully done this before? Any ideas how I might be able to get this to work?
  
  Thank you!

  Use the type SEM_MODELS as shown below:

  declare
  model_list SEM_MODELS;
  Start
  model_list: = SEM_MODELS ('M1', 'M2');
  ...
  end;
  /

• Designjet t520: designjet t520 default login and password for web server

  Hello!

  Which is the default login and password for the web server and how to reset the password?

  Hello
  
  As mention Rashed, there is no password to the factory.
  
  Try a Restore Factory Settings.
  
  If this does not work, go to the Help Menu and do a Soft Reset. (Don't do the hard reset).
  
  For access to the support menu press on and hold the power button for 15 seconds, or at the home screen tap home, back, home, home.
  
  Concerning
  
  Mike

• How many slots for RAM, model HP 250 G5 (W4M85EA)?

  How many slots for RAM, model HP 250 G5 (W4M85EA)?  What is the maximum amount of RAM supported HP 250 G5 (W4M85EA)?

  @Frodo9911

  Two memory non-customer-accessible/extendable module slots

  Supports up to 16 GB of RAM

  Your manual here.

  http://h10032.www1.HP.com/CTG/manual/c05087748

  REO

• Re: Satellite M35X-S149 - impossible to find a correct battery for this model

  I can't find the correct battery for this model.
  I looked on the websites of Toshiba, but I did not yet find.

  This model does not recognize by finder tool toshiba.
  I will be grateful if anyone has any idea where I can find suitable battery.

  Battery model number is: PA3395U-1BRS

  Hello

  You are already viewing the battery model number.
  Where is the problem? Google for this farm and I m you will get some online merchants who could provide this battery.

  Otherwise, get in touch with the Toshiba ASP in your country and order compatible battery.

• Satellite Pro L100 - which hard drive is maximum for this model.

  Dear users, I have a problem with choosing appropriate new HARD drive for this model. I have no idea of this title is to the maximum with what my BIOS will manage. This model, I bought on the year 2006.
  I would be grateful for any help.

  Hello

  AFAIK this Satellite Pro L100 has been equipped with a SATA HDD controller.
  All hard drives 2.5 SATA should therefore be compatible controllers SATA HDD with no limitation.

  Beginning taken IDE controllers support only 28-bit LBA and allows only to hard disks up to 128 GB.
  Given that the ATA - 6 the 48-bit LBA is supported which allows the use of larger hard drives?

  Greetings

• ADF duplex for LaserJet models?

  Hello
  
  I'm looking for a laserjet model features automatic duplex ADF. So that the device can perform a copy double-sided on a stack of documents face / back loaded in the ADF. Thus, 2 faces-> option 2 sides for the copy and scan. I am grateful if anyone knows if HP have devices that can handle this.
  
  HP Color LaserJet m477fdw MFP Pro has the ADF duplex function?
  
  Thank you
  Stig

  > I am looking for the laserjet has auto duplex ADF model.

  Several models have automatic duplexing ADFs, but they are all in the higher end products.  If you provide us with a price range or a similar product, you are replaceing with we can compare the specs and suggest something in your budget.

  > Does HP LaserJet Pro m477fdw Color MFP has the ADF duplex feature?

  Yes.  It does not mention the specs on the main sales site, but the datasheet for many models will confirm the duplex as a feature or not.

  m477dw data sheet:

  http://store.HP.com/wcsstore/hpusstore/PDF/cf379a.PDF