Default export settings?

Similar Questions

• Export to PNG file document. Change the default export settings.

  Hi all

  In my plugin, I need to export the active document to the file png with specific options. And sometimes I need to export final document, but not all pages.

  In the standard UI of InDesign, there are several basic steps of export:

  1. 'file'-> 'export ';

  2. choose the location and name of the file to export

  3 customize export options.

  

  In my plugin, I need to be able to set options in steps 2 and 3.

  I discovered that there are a few bosses, dealing with the PNG:

  kPNGErrorStringServiceBoss

  kPNGExportCommandBoss

  kPNGExportPrefsScriptProviderBoss

  kPNGExportProviderBoss

  kPNGExportSetPrefsCommandBoss

  kPNGExportUIDialogBoss

  kPNGFilterConversionBoss

  kPNGIconButtonWidgetBoss

  kPNGImageReadFormatBoss

  kPNGImageWriteFormatBoss

  kPNGPrefsDialogBoss

  In addition, there are a few interfaces and widget id in the following headers "PNGFilterUIID.h", "PNGPrefsUIID.h", "PNGFilterID.h", dealing with the png export process.

  One of the ways to solve my problem is to create the export png dialog (maybe IDialogMgr::CreateNewDialog), iterate over all the widgets and set the required values, but I don't know how to create this ExportDialog.

  Any ideas how to solve this are of great value.

  Thanks in advance.

  The sollution is the following:

  1 bring a complement to kDocBoss with the new interface can IExportToPNG

  2. in the application of IExportToPNG, use SnapshotUtilsEx.

  P. S.

  The correct order of the use of SnapshotUtilsEx is:

  1. use the constructor of SnapshotUtilsEx (...)

  2 SnapshotUtilsEx::Draw (...)

  3 SnapshotUtilsEx::ExportImageToPNG (...)

  Kind regards!

• Change default export for the whole of the sequence

  I got burned again.

  Someone at - there a way to change to 'whole sequence' default export settings regarding the

  incredibly stupid ' in/out sequence "?

  When you have a lot say 12 long sequences, you can't miss these stupid little in and out of the points.

  I would like to have the default value as the "whole sequence. 999 times out of 1000 I export the entire sequence.

  having to check each time in boring. And I have been burned many times by this feature.

  Avid, FCP6, 7, X all export the entire sequence unless otherwise stated.

  All solutions?

  Hello Avid MCD,

  Someone at - there a way to change to 'whole sequence' default export settings regarding the

  incredibly stupid ' in/out sequence "?

  I would like to have the default value as the "whole sequence. 999 times out of 1000 I export the entire sequence.

  having to check each time in boring. And I have been burned many times by this feature.

  It would be a great feature request. Please be sure that here.

  Thank you

  Kevin

• Lack of PDF from InDesign export settings

  All of a sudden, as I try to make the customer on a date control files limit, all the default export settings (such as "the smaller file size,'"press quality printing"is reported missing. Need to quickly restore. Any ideas?

  Download http://dl.dropbox.com/u/16243351/joboptions.rar joboptions

  Browse to the file--> Adobe PDF presets--> set and load the joboptions in InDesign.

• In the new update, I can't believe that the default Source range in the export settings went from the output sequence.

  Very very disappointed for someone who does a lot of export high speed it has great effect. Does perform a work around?

  Thank you

  Jeff

  If you have activated the workspace, it will be by default Source range: workspace in the export settings. Go timeline menu burger/wing tab, and clear the work area. Who will come back you to the Source range: in and out sequence in the export of parameters.

• PDF export settings have disappeared?

  My pdf export settings have disappeared. This is the default, hires, ready to print, settings lores.

  I tried to look for a solution without a bit of luck!

  Anyone have any ideas?

  See you soon!

  Means the faster seems be reinstall InDesign...

• Export settings

  Hello world

  Although I had the first few months, I'm still a novice. I have some pictures of my hero4 gopro 1080 @ 29.97 30 fps and I have pictures of my drone that is 4 K video, 30 fps, 29.97

  The video looks seems not very well in the first, but when I export it, or upload to youtube as crispy... Any thoughts on the best export settings to choose for this? Difficult to understand since I use two different rates of video, but I figure that there is a common practice.

  any help would be appreciated!

  Ray

  There are several ways to get a new sequence. One is to use file > new sequence and choose a preset in the list. This assumes that you know the exact specifications of the sequence that you use and have the necessary expertise to choose a preset that fully corresponds to the length (frame size, frame rate, pixel aspect, fields, etc.)

  Another is to simply drag a clip to a mounting empty by default and it should ask ' do you want to overwrite settings sequence clip? Of course, this only happens with the FIRST clip, you drag on it, so if it's a picture clip or video yet different from others, you can end up with "the right size" for your sequence.

  You can right-click on a clip in the tray and select new sequence of the Clip and it's quite reliable! Of course, you must consider the flow of work and the so desired output. You mix 4K and HD clips, should edit you like 4K or HD? If you must provide only 4K, then change in the order of 4K and HD clips will be enhanced. But if you want to deliver HD, then edit in sequence HD and 4K will be reduced in HD, then convert them to the HD.

  I still mainly edit with CS6 (long story) and who has the Scale to the setting option and I only activated in Prefs, so that any clip I'll just in sequence automatically adapts. However, CC now offers an option of game to the size of the image , and the advantage of this with the example to put a clip of 4 K in a HD sequence is that the clip of 4 K to insert as part of the HD, but you still have all the extra 4 K resolution available if you want to crop the image with effect of movement (pan/zoom).

  Scale to frame or the value framework should give equal results if you do not zoom in the largest clip, using just straight up.

  In any case, be sure to choose a setting appropriate to the sequence at the beginning of a project - disobedience can ruin the works, as evidenced by the many posters on this site. The sequence is the basis for the entire production. If this is incorrect (size of the frame, cadence, or aspect pixel, wrong field mess) the video can and will suffer to varying degrees. To check the current settings, choose sequence > sequence settings in the menu. Compare with the source item (right-click on a clip and check the Properties).

  Thank you

  Jeff

• How can I fix the gap between the default project settings and the music video

  I'm building a DVD in yet CS6, and some of the images you want to fragile/wobbly preview and after that I have burn to disc.  I think it's because the images were shot at 24 fps, progressive and native transcoding for standard def DVD settings are 30 frames per second, interlaced scanning speed.

  I could not change the default conversion settings, and research online, I did, it seems that those who are set in stone. I was able to modify the project settings to export a lot of my images, but it did not help the problem. Nor do transcoding the video clip.

  The project was originally shot on two cameras - a Canon 5 d Mark iii and a Panasonic GH2. Images of Canon has no problem. Only the GH2 images seems wobbly preview and make. I edited the video file in Adobe Premiere Pro CS6, and then exported to MPEG to DVD at 24 p, set NTSC high quality large screen. Any ideas on how to solve this problem?

  Editing mode: QuickTime DV NTSC

  There is your problem.

• restore the default permission settings in vista

  How to restore the default permission settings in Vista

  I had problems sharing files and went to different media pages, mainly integrated ones. I changed the user permissions and tried to add the user on the Security tab, but I must have done something wrong. 128-bit encryption seems to be lost. Maybe it's that everything that triggers this file was transformed into a "read only" file (which has happened to another file, I've tried to share). Any help will be appreciated.

  Hello

  To reset security settings back to default, take a look at the following article:

  http://support.Microsoft.com/kb/313222

  • Click the ball to Start .
  • Under Search, type cmdand press ENTER.
  • Type the following command, and then press ENTER:

  secedit/configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose

  You receive a "task is completed" message and a warning message that something was impossible. You can ignore this message.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BIOS does not detect not hard drive for laptop after the setting of the default BIOS settings.

  I had my 14.04 installed Ubuntu in my laptop in a reader named «Notebook hard drive» a pre-installed Windows 8. Today I put the default BIOS settings in my phone and when I rebooted it and tried to use Ubuntu by pressing 'F9' key and choosing from the menu of the BIOS I found my 'Notbook HDD"option missing. My disk of Ubuntu is still there, but I have no way to access it. Is there a way I can get it to work?

  Try turning off secure in the BIOS and then start by restarting the laptop.

• Change default program settings

  Original title: default... My fault?

  I changed the default on my desk somehow and now all my programs, (no files) are opened up by my HP Media Center program. I tried to change the default from Windows, but it won't let me. Can anyone help?

  Hi Candace,

  Welcome to Microsoft Community where you can find the answers related to Windows.

  According to the description, it seems that the default settings for system program has been changed.

  I suggest you to consult the following Microsoft article that will give you more idea about the windows default program settings.

  Changing the programs Windows uses by default: http://windows.microsoft.com/is-IS/windows7/Change-which-programs-Windows-uses-by-default

  I suggest you to perform system restore to a point when the computer was working fine.

  System Restore: http://windows.microsoft.com/en-US/windows7/products/features/system-restore

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Export settings - incorrect page layout

  Hi guys,.

  You wonder if you can help me, I hit a dead end! Thus, the first image shows a screenshot of my indesign document hence is the median line. However, the two images show the export. The second image is the first page where it ends and adds at the edge of the second page on the end, and then the third image is the second page, but seems to add at the edge of the first at the beginning.

  I can't work out why. It must be of export settings (?), but I tried everything what it seems!

  For reference, the background and the presentation is a document linked from photoshop, mounted at the waist. It works very well when you export as a spread, however, I need to export individual pages as for our printers.

  Any help would be greatly appreciated!

  1                 2           3

  

  I think that will be sewn way SADDLER (folded and stapled) and does not require bleeding from the inside. Set it to 0.

• Adobe 2015.3 Premiere Pro export settings

  Hi people,

  iMac (27 inch, at the end of 2013)

  3.5 GHz Core i7

  32 GB 1600 MHz DDR3

  NVIDIA GeForce GTX M 780, 4096 MB

  So, updated to 2015.3 and I see on the window of Premiere Pro export settings have changed considerably. One of the big things for me is I can not put my bitrates as I used a high-end and low-end, one pass, re-encoding, etc., which is kind of a big deal to me. Is there something I'm missing here? My old preset still life in Media Encoder but I can't get it to load first because those moments I export only a single video file.

  Any help is appreciated.

  Jim R.

  Well, I don't know what happened, but when I opened just first again (and I did that several times today since updated the software) the old presets were back. When I installed initially 2015.3 he only had like 6 or 7 presets available, now they are all here. Maybe some kind of anomaly or something weird I did initially. Anyway, I'm back in business. Thank you!

• Poor quality and poor framerate with best export settings

  Hello, this is my first post, I searched the forums, watch videos on youtube, etc, but don't never came across something like this before, but anyway let's get down to the heart of the problem at a time!

  I am currently using Adobe Premiere Pro CS6 (Version 6.0.2)

  Specifications of the PC

  -Intel Core i7-4720HQ CPU @ 2.60 GHz

  -16 GB OF RAM

  GTX - 960 M graphics card

  The problem:

  I have been using CS6 6 months now and not had a problem since day one.

  The videos that I do are gameplay videos captured at 60 fps 1080 p with 36857 Kbps Total bitrate.

  The videos where export with large 60 fps framerate, quality, as it should in the first place.

  But everything changed one day after I did everything with the same agenda, as I did each time and video when exported was of poor quality and the rate was 30 frames per second.

  BUT, when I am trying to check the properties of the video exported, everything is as I put is on the export settings, even if the vacuum has dicreased quality and bad frame rate (30 fps) up.

  I am exporting as follows:

  -Format: H.264

  -Basic video settings:

  -Width: height of 1920 1080

  -Frame rate: 59.94

  -Order of fields: Progressive (it doesn't let me change it)

  -Appearance: Square Pixels (1.0)

  Tv - standard: NTSC

  -Profile: high

  -Level: 4.2

  -Rendering to maximum depth (verified)

  Flow settings:

  -Bitrate VBR, 2 pass encoding (I also made 2 pass, but had the same effect)

  -Target speed [Mbps]: 36,82

  -Maximum Bitrate [Mbps]: 62.5

  Advanced settings:

  -Key Frame Distance 72 (verified)

  Use maximum quality rendering (verified) use Previews (verified)

  I finally understood everything!

  So when I started the project for some reason, I had chosen under the option 'Make and video playback' Renderer: Mercury Playback Engine GPU Acceleration (CUDA) instead of Mercury Playback Engine GPU Acceleration (Open CL).

  After that everything worked perfectly as it should in the first place.

  Thanks to everyone who tried to help me understand my annoying error!

• That theatrical video export settings, should I set up?

  That theatrical video export settings, should I set up? For example, what kind of parameters the creators of "Deadpool" and "Hail!" Cesar"used for their photos?

  Hey there! I mean the first pro CC 2015. I thought I was in the forum program.

  Two copies... Locked... What the theatrical video export settings, I should put up?