Default file name: Windows and scan Windows (Windows 7)

Similar Questions

• How can I get the 8.3 file name short AND way?

  We use some old DOS programs and need to use the old format back (filename.xxx). When the files are in the long trees, it is very difficult to find the names of files under Windows.

  There was a response published in Google (http://answers.google.com/answers/threadview/id/522710.html) which works very well under XP, but when I use it in Windows 7, I get the long file name.

  Does anyone know how to do this?  The program can be changed?  Here is the program of this flajason-ga posted, but it must be updated for Windows 7 (I only know how to program in Foxpro).  Thank you, Alan

  Topic: Re: how to get the 8.3 file name short AND path? From: flajason-ga on May 27, 2005 10:45 PDT

  After my last comment, I read your details a little closer.
  The last script I posted was to list out a whole directory in 8.3 format.
  If you are looking for a friendly way of Clipboard to recover the 8.3
  for individual files, that will be more to your liking.

  Same thing as before. Copy the below into Notepad and save it with a .vbs extension.
  Except that this time, you can simply drag and drop a folder or file icon
  on the .vbs file and it displays the short path in an input box.
  where you can copy the value and use anything you want to.

  If you're industrious, you can also save the .vbs file in your
  Folder "send to" (C:\Documents and Settings\ [yourname] \SendTo) to have
  It is available in your context menu with a right click.

  Set fso = CreateObject ("Scripting.FileSystemObject")

  ' Is a file or a folder?
  If fso. FolderExists (WScript.Arguments (0)) then
  "It's a folder
  Set objFolder = fso. GetFolder (WScript.Arguments (0))
  Refund = InputBox ("this is your short path:", "SHORT PATH", objFolder.ShortPath)
  End If

  If fso. FileExists (WScript.Arguments (0)) then
  "It's a file
  Set objFile = fso. GetFile (WScript.Arguments (0))
  Refund = InputBox ("this is your short path:", "SHORT PATH", objFile.ShortPath)
  End If

  Hello

  Read the following article.

  How Windows generates 8.3 names to long file names
  http://support.Microsoft.com/kb/142982

• A7r / A7 file name change and bottom of shutter

  A7r / A7 file name change and bottom of shutter

  A simple feature to add to a new FW must have the ability to change the START of the file name.

  If you have two new A7r... both have simular filenames and will start conflicts.

  What you should be able to do... it's name... say A7r_00001 HDR and HDR-A7r2_00001

  WHERE in the EXIF is the actual NUMBER of trigger to shutter (unchanging)?

  It's like the odometer of camera

  Excellent Suggestion!

• How can I get rid of the file name, date and size of the photo in the upper left corner of the module develop when I'm not working on the photos?

  How can I get rid of the file name, date and size of the photo in the upper left corner of the module develop when I'm not working on the photos?

  All shortcuts are listed on the view > menu Info Magnifier.

• How to save photos in a new file, name it and get the pictures in this file

  I have photos that have been sent to me in an e-mail. I want to save them and create a new file in Windows Live Photo
  Gallery. I right-click and SAVED AS... then went to MY... and under some PICTURES under photos put my cursor
  to open a NEW CASE. He did open an empty folder and not of uploaded photos.

  What I am doing wrong? I want to save the photos, open a new folder/file, name and save the pictures of
  enamel in the new folder/file. How to achieve this?

  Thank you.
  Gilenya

  Gilenya,

  After you create a new folder, you must go inside this folder to save your photos.  I'll bet that you created the new folder, and then you click OK (or save), which caused the pictures save a level upwards in the folder that you created.

• Cannot unselect the file name extensions and hidden items

  Nice day

  I use Windows 8 Pro. I noticed that all my files file name extensions
  are visible, so I went in to my folder and under show/hide display board, I saw that "File name Extensions" are checked
  and "Hidden Items" unchecked.
  I then tried to uncheck "File name Extensions", but nothing happens. The checkbox just reappears and I can't delete
  the name of the file extensions, so to speak. Also I cannot view my hidden object because when I check this box it displays a check mark
  for a split second and then it is still a time unchecked.
  I also went in Folder Options in Control Panel, click on "View files, folders and drives" and I checked
  him "Hide extensions of known file types" applied, but nothing happens. When I reopen it the Folder Options both of them
  Yet once are unchecked.
  If anyone can help me in this matter, it will be appreciated gratefully.
  Concerning
  Rohan

  Hi Rohan,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you can't hide from the files extensions and show hidden files in a folder.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.

  The problem is specific to a particular file?

  This problem can occur because permissions, corrupt user accounts or even damaged files issues.

  We will first of all, try the procedure described in the article and check if that helps.

  "Access denied" or other errors in the access to or work with files and folders in Windows
  http://support.Microsoft.com/kb/2623670?WA=wsignin1.0#Method2

  Note: Try the steps under 2nd edition:

  See the article for more information.

  How to work with files and folders
  http://Windows.Microsoft.com/en-us/Windows-8/files-folders-Windows-Explorer

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with files, I'll be happy to help you. We, at tender Microsoft to excellence.

• prevent the file name change and auto complete field

  With the help of Acrobat DC Pro.

  Is it possible to prevent a user from changing the name of an acroform file if they save or save as?

  If it is not possible to prevent the user from changing the file name, is it possible to automatically fill a form field with the new file name when saving, or when you submit the pdf?

  I hope someone can help.
  

  Avoiding it is not possible.

  However, you can prevent the submitted file if it has a

  different name. This would require using a script, however.

  It is also possible to set the field to display the file name, by using this code

  at the level of the doc:

  this.getField("FileName").value = this.documentFileName;

• adding file name suffix and re-registration

  I need a simple script that saves the file opened under a JPEG compression of 80% in the same directory as the original, while adding a suffix at the end of the file name.  For example, if the open file is "image.png", I would it is saved in the form 'image_thumb.jpg '.  I tried to create my own, but I don't have the chops for the script.  Can anyone help?

  Replace the line

  var docPath = Folder ("~/Desktop");

  with

  var docPath = decodeURI (activeDocument.path);

• Restore the default file on Windows 7 association

  Original title: open with default values

  When you change a file to open it with the windows photo viewer some how chaged all files on my computer to open with the photo viewer there are no restore points, or backups is there a way to cancel it or fix it

  Hi michaelwilliams,

  Method 1: Run the fixit available in the link below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: You can see the steps in the link below by Shinmila H

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/wrong-file-association-every-application-tries-to/c72d3210-b4a4-4d09-b5e9-85d793ff18a5

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• Change the default file for downloads and some user folders locations

  A big thank you to all who have helped me, more recently DAXnnn and try * 3.  I come once more in need with questions.  For the cleaning of my boot partition before cloning to a smaller SSD, I'm getting cause folders USER My Documents, my music, my pictures, and my videos to be moved to a different physical disk drive.  I also want to do the same with the downloads.  After trying to use MKLINK (without success) and the location of the tab in the properties for folders (in vain), try * 3 put me on editing the registry.  While I did not yet any change, I followed his instructions to look under HKEY > CurrentUser > software > Microsoft > Windows > CurrentVersion > Explorer > Shell user folders and confirm watch registry.

  What I found is that the actions I took before running into problems using the options of localities had caused registry entries updated to show the new names of path of My Documents (under personal in the registry path) and my music.  This leaves downloads, my pictures, and my videos to be changed before the data transfer of the boot partition to reduce before cloning.  I discovered the writings of my pictures and my videos contain a variable %UserProfile% then the names of folders.  My assumption (often a wrong thing to do, I know) is that I can change these entries replacing %UserProfile% with the name of path, including the drive etc letter describing where I want to move the old data and write new data and changes.  IS THAT CORRECT?

  Regarding downloads, what I discovered is the second entry in HKEY > CurrentUser > software > Microsoft > Windows > CurrentVersion > Explorer > User Shell Folders, below (default) is a name {374DE290-123F-4565-9164-...}, displayed once indicating the value of % USERPROFILE%\Downloads.  Using my penchant for the skip logic, I assume that I can edit this article replace the value data with the path name where I want future writing downloads.  IS THAT CORRECT?

  If I can confirm or correct information, I am very close to stripping the size of my partition boot prefixed operation clone to place what's left on my SSD.

  Thanks to all for participating in such a large forum community!

  HR

  Yes you are right.  If you want that your download location for be moved, just change:

  Old: %userprofile%\downloads

  New: E:\OtherDrive\Some Windows\

  This will make all your downloads stored in the folder 'folder of some '.  Just be sure to include a folder name and make sure that this folder actually exists.  Make sure not to say a disc like E:\ or all your documents could get dumped at the top of this reader, rather than in a folder.

• Factory default files (pictues, music and videos) for Xperia Z3

  Hallo,

  could someone share the files to factory default (pictues, music and videos) for Xperia Z3?

  Or where I could download the files?

  Thank you

  @RaceFace85 @aier 

  I'll transfer the images and music files

• I asked questions on the additional sheet that is printed indicating the file name, etc. and I don't know how to stop it, such a waste of paper!

  When I print my document from Microsoft Word, a second sheet is printed to view information about it, like the time edition Total, last printed on and number of Popes. Words and characters, which mean nothing to me, nor that I like, such a waste of paper!  Help, please.

  http://www.Wayne-Robinson.com/journal/2008/1/24/stop-printing-document-properties-summary-page-in-Word-2007.html

  If this does not resolve your problem, or if you have a different version of the word, ask in the forum Office.

• Windows Picture and Fax Viewer seen only by Crescent and descending file name. I want to do more...

  Hello.  I use Windows XP service pack 3

  When I reformatted the computer earlier (before I updated my service packs and all), I could go in my windows Explorer, I could see all my photos by file name, updated and the date of creation (both increasing and decreasing) with windows fax and picture viewer.

  Now (after installing the latest service packs), when I find my pictures with Windows Explorer, I can sort the photos by what I mentioned above, but windows fax and picture viewer will only see in photos by file name (ascending or descending order), it will not display the photos in order by size, date of creation or update.  Even if the order has changed viewably on explore, I can't see the pictures created or modified or size of the order (order asc & desc).

  I clicked on the update column, with the arrow going down on the selected column, and also once again, if the arrow is pointing upward.  Then I went to double click on the first picture in the amended order, and after I saw the first picture, I clicked on WP & F viewer (or use the arrow keys on my keyboard) the arrow to view the next photo in the changed order and the next picture that appears is in order of file name!

  Now, I want to be able to switch between the use of all columns or sorting:

  ~ file name (order asc & desc)

  as well as

  ~ modification/creation date (also in order asc & desc)

  or

  Size (order asc & desc)

  is there a way to fix this without having to download new programs to view my photos?  Or having to rename one of the file names?

  I don't think that it has nothing to do with the dates of my photos.  They have all of the appropriate dates stamped on.  And rename one of them to a single specific command won't help.

  I really enjoy using windows greatly fax and photo viewer.  I don't want to replace it.  I just want to see my photos in order, I want to see them with windows fax and picture viewer.  And I would be very happy to help on fixing this problem.

  I thank you for your time, and hope you're answers coming soon.

  I restored my computer twice, and I don't know when it started to happen to me, but today I started thinking, ' it did not use to jump around like that. " I am looking for an answer now.

  Edit: Hey, I think I've found a fix for this problem!

  First of all, I tried this http://www.windowskb.com/Uwe/Forum.aspx/windowsxp/162211/Picture-and-Fax-Viewer-displays-images-out-of-ordersite, but the solution did not work for me. Then I found this site http://www.compu-help.us/157.htm, and the first suggestion seems to have solved the problem. My images now show in the order. (Summary: a patch for the computer messed up Windows and Fax Viewer.) To correct, click Start and then run. In the run box, type: regsvr32 shimgvw.dll)

• M1212NF multifunction printer - add file name after scanning

  Hello

  I recently installed a M1212NF MFP for a customer.  They must be able to save scanned in PDF with the same file name without overwriting the original file. Instead, they would like to have a 4 digit number appended to the file (for example filename.0001.pdf, filename.0002.pdf etc.).  They would also like to be able to define their own file names instead of using a base (for example, customefilename.0001.pdf, customfilename.0002.pdf etc.) file.

  The printer has been installed on a network and does not act as a local USB printer.  The PC using the scan functions is under Windows 7 64-bit.

  I installed the software that came with your printer, but cannot find anywhere where it can be configured.  I know that after HP products have been able to do this via the HP Solution Center.  The solution center not delivered with the product.  Since I tried to install the HP Solution Center software, but I can't go beyond being invited to connect to the printer via a USB cable.

  I know it's easy enough to manually change the file name of the scanned pdf file when you are prompted to replace to save.  The function append is convenient for my client, given the constraints of time & workload.

  Any help would be appreciated.  Thanking you in advance.

  See you soon,.

  Sonny

  Unfortunately, this is not an option for support with this printer.

  Sorry

• Message outlook to PDF conversion: change the name of the default file to the time instead of the subject?

  I have a large amout of email that I convert to PDF using a plug-in in Adobe Acrobat Pro XI through messages Outlook 2010.  I don't want a portfolio created, rather a single pdf file.  I've been open every message and conversion to pdf format, rename the file with date/time (subject line is the default file name), can I combine PDF mutiple files in a single document.  This process would go a lot faster if I could change the file name by default at the time, rather than rename them myself.  Does anyone have an idea on how to change this setting?  Or any other ideas to make this process easier?

  Hi melrogotzke,

  In Outlook 2010, when you click on the tab 'Adobe PDF' there is an option "change Conversion settings.

  In the present, uncheck the option "Output Adobe PDF portfolio when creating a new PDF file".

  You can now select the mails in outlook and convert to PDF and all selected emails would get combined into a single pdf file.