Default message

Similar Questions

• Message queued, case/default message handler?

  Hello

  I started to implement the QMH design for my application model:

  • Producer
    A state machine that implements my algorithm:
    Move actuators, send commands to a camera, settings etc.
  • Consumer
    A state machine that sends low level commands to devices according to the task at hand

  But now I have a problem:

  I would constantly check and show the positions of the actuators, as a case of default/message. Positions, different measures should be taken. If I were using a structure of the event into the loop of producer, I could use his timeout feature, but in my state machine, I can't do that.

  Example in the loop of producer:

  1. State "actuator move to position"-> mobile actuator
  2. Check the position every 100 ms until the goal reached<---- this="" would="" be="" my="" default="">
  3. After that position is reached, take a picture
  4. Output

  I admit, I still have a bit of trouble differentiating between the States and transitions. Currently my status in the producer State machine loop where to send the command 'move' and the positions of the target, is called now "move to xy. It runs only once. It might be preferable to have a State "now in motion" which reads the position and going on to the next State (for example "stopped") once the target is reached?

  Any thoughts on this please?

  Thank you!

  But now I have a problem:

  I would constantly check and show the positions of the actuators, as a case of default/message. Positions, different measures should be taken. If I were using a structure of the event into the loop of producer, I could use his timeout feature, but in my state machine, I can't do that.

  Why not? You can set the dequeue time-out so that if no message is received, it goes to a case of "timeout" of your QMH which is where you can check positions etc.

• Anyone know how to change the default message in the sending of e-sign?

  When you send a document for review and signed (in my case for audit purposes), are anyway change there is a default message that appears that basically says the review and sign [file name of the document you sent]. Currently, I have one on my notebook that I have to constantly open and copy paste. There must be somewhere where this message can be changed. Someone did and how did you do?

  Hello Wayne,

  It's configured system indicated in the email message. You can only customize the message you type in the Message box while sending the document for signature.

  Kind regards

  -Usman

• Default message for signatory

  Hi, is it possible to change the default message for the signatory to something else?

  

  Concerning

  Ken

  Models of message is a Document Cloud company Premium feature.

• Replace the default Message before the selection

  Hi Experts...
  
  Is it possible to override the default message that appears before the selection to guests.
  
  No results
  All data is not cause to the specified criteria. This is often caused by the application of filters that are too restrictive or contain incorrect values. Please check your filters to ask and try again. The currently applied filters are listed below.
  
  
  MONTH is equal to Jan
  and PRONISTIQUE is equal to EU
  and GRP_CUST is equal to SNY
  and TYPE does not match the TnM
  
  
  This default message can be overwritten?
  
  Kind regards
  Vidal has

  Hello

  1 open the report answers
  2. choose the results tab
  3. in the tab results choose view results no.
  4. in the opinion No. results you will see the text:

  Use the fields below to specify what should be displayed when this analysis not return results

  Write something in the text field. It will aply when any given instead of:

  All data is not cause to the specified criteria. This is often caused by the application of filters that are too restrictive or contain incorrect values. Please check your filters to ask and try again. The currently applied filters are listed below.

  I hope it's pretty clearly.

  Kind regards
  Goran
  http://108obiee.blogspot.com

• Restore the default message window

  I accidentally resized my window Messages and I would like to reset to the default.

  Click and drag the lower right of the window to resize.

• Cannot change the default messages in whatsapp on Apple Watch

  Hello

  I have a Apple Watch version 2.2 and I added some messages to messages by default on the application of the watch in the iphone.

  When I got a regular messages I can use in new messages I added amd can use them.

  But when I got Whatsapp messages I saw messages that I added.

  I saw just the regular messages that had arrived at the default value.

  Why?

  Hello

  By default the answers that you configure in the app shows should be used with the integrated application of Messages.

• Impossible to change my default message font in Mail :-(

  Hello

  I'm changing the default font for my Mail message. When I access mail 'Préférences', click on 'Fonts & colours' it is said that my policy of Message is set to "Helvetica 12". When I click on the "Select" button, a pop up window which me gives access to different fonts (is this font book?). I navigate to my desired police ' 12pt Gotham Book, but there is no final don't execute button? How can I say Yes use this font?

  Don't actually say you 'yes' or need to "run" anything. When you click on the family, police or the size of the columns, you will see the change reflected in "" Message fonts: "." Then you can just close the 'fonts & colours' and the 'Preferences' windows.

• How can I change the default messaging in windows xp pro to gmail?

  I want to send attachments in gmail excel workbooks, but windows xp does not establish my default gmail e-mail program.

  others have suggested here that I use gmail as a warning system. but my browser of choice is firefox 11.0, which does not accept gmail warning system [only 3.6 and earlier versions accept the declarant].

  can someone help me solve this problem?

  Thank you!

  If this does not work for you, then simply start a new message and then attach the file. Don't know what the 'outlook solution' is.

• By default message - not properly installed e-mail client

  Separated from this thread.

  I have the same problem with Windows 7. I get the "...". default e-mail client... "message.

  I had this problem for years. And I have Outlook Express.

  This happens when I want a page of a site, an e-mail when the site offers to share the page via Facebook, Twitter, E-mail.

  I have the same problem with Windows 7. I get the "...". default e-mail client... "message.

  I had this problem for years. And I have Outlook Express.

  Hello

  You are running Outlook Express on Windows 7. You must mean the service of electronic mail on the web, outlook.com

  To use send this page or send the link, you must have a defined default e-mail program.

  Up to 2 exceptions (covered later) does not allow a web e-mail service by default.

  Windows Live Mail is popular and easily adjustable to serve Hotmail or Outlook.com e-mail service
  http://explore.live.com/Windows-Live-Essentials?OS=other

  Thunderbird is another popular e-mail program http://www.mozilla.org/en-US/thunderbird/

  Microsoft Office Outlook (not outlook.com) can also be set as the default e-mail program.

  After installing an e-mail program, make sure you have a default e-mail together program control panel > Default programs > set access and computer program defaults > Custom > click the caret down.

  The default e-mail program must be installed on the computer - for example Windows Mail (Vista), Windows Live Mail, Thunderbird, etc.

  Web-based e-mail services cannot be made except by default e-mail program:
  * Yahoo, with the Yahoo tool bar
  http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/settings/settings-10.html
  * Gmail with the installed Google toolbar
  https://support.Google.com/toolbar/answer/34800?hl=en

  Don

• How to change the default message for the required attribute of the entity?

  Hello
  
  I use JDeveloper 11 g 11.1.1.5
  
  Is it possible to modify a commit message by default on the attribute of the required entity? I don't want to show the user something more useful than VO and the name attribute.
  
  
  Anatolii

  Hello
  You can open the respective OS.
  Open the business rules and then select the required attribute and click the Edit option and write your custom message
  on the Management window of failure on the error message section.

  Thank you
  Sumit Yadav

• Firefox does not recognize the default messaging application in win7 64 bit

  I installed zimbra desktop on a fresh windows 7 64 bit. and I chose zimbra desktop to the default e-mail client. m$ internet explore open zimbra desktop when I click on a mailto link. but in firefox I can only choose 'thunderbird', 'yahoo mail' and 'google mail' as the mail clients by default when I click on a mailto link.

  I tried this: https://support.mozilla.org/en-US/questions/984225 but it does not solve my problem.

  I have windows 7 64-bit, firefox 29.0.1 and zimbra desktop 7.2.5 installed.

  Hey again,

  Thanks for your reply. with Process Monitor , I was able to debug the problem and find a solution.

  Zimbra Desktop does not have key of registry HKLM/Software/Microsoft/Windows/Shell/Associations/UrlAssociations/mailto/UserChoice but firefox only reads the key.

  so to summarize what I did, here a list:

  • Remove mimeTypes.rdf as described here
  • Delete HKLM/Software/Microsoft/Windows/Shell/Associations/UrlAssociations/mailto and all of its subkeys or change HKLM/Software/Microsoft/Windows/Shell/Associations/UrlAssociations/mailto/UserChoice/Progid to "ZimbraDesktop.Url.mailto".
  • of the ZimbraDesktop made ZimbraDesktop as default mail client

• How can I avoid that gmail to automatically respond to each request even if the my default messaging internal and external is Outlook Express?

  Gmail became invisible my default in FF 3.6.3 even if I never said it. Tools/Option there is no other choice to remove GMail and I mentioned Outlook Express which is also my default operating system (XP)

  This has happened

  Each time Firefox opened

  not sure

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0 .NET CLR 1.1.4322 .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729;. OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

  Go to Toos-> Options...
  Go to the applications tab, and then search for mailto. Action selesc using Microsoft Outlook, and then press ok.

• The switching default messaging program

  Is there a way that we can do something to prevent updates of switch the default e-mail program to Outlook (from Outlook Express) & put an icon on the desktop Outlook security?

  See...

  (2003 & earlier) updates of Microsoft Outlook to change the default mail manager in Microsoft Outlook
  http://www.oehelp.com/OETips.aspx#13

  Related, but probably not very useful: http://support.microsoft.com/kb/933450

  OPTION A: assuming that you do not use Outlook, delete it from your installation of Microsoft Office 2003 or an earlier version. Note that doing so will also remove all Outlook calendar feature.

  OPTION b: change your configuration of automatic updates to notify them that (notify me but don't automatically download or install) option then does not approve the download of updates Outlook.

  How to configure and use automatic updates in Windows XP:
     http://support.Microsoft.com/kb/306525

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Components DVT - how to change default messages?

  Hello everyone,
  
  I have used components of deep venous thrombosis in my form. I want to change messages and texts of ToolTip for these components.
  I found a way to change the color and style but not a good way to change the texts.
  
  How can I change these messages to my own custom?
  
  Thank you
  Nima

  Add to your resource group:
  af_dvt_hv.fetchingData = Your text