MacBook Pro froze access to iCloud tent and now I can not turn off my computer

Similar Questions

• Re installed Windows and now I can not turn on. I tried activating the phone, but to no avail.

  Authentic copy does not

  I did a reinstall sometimes come back now, he says he wants me to recheck my copy of copy of Windows Vista and I tried but on my computer and on the phone and its does not work.

  Hi Gary,.

  1. what exactly happens when you try to activate a copy of Windows Vista?

  2. What is the full error message that you receive?

  You can try to check and validate the copy of Windows Vista.

  Consult the following link:

  What is the validation, and how does it work?

  You can also read the following article and check:

  Resolve activation problems

• I just updated my computer and I have a windows 7 disc that i percisted and now I can not turn on

  Windows was ok on my old system, but my windows is a disk of oraginal were brought from the United Kingdom

  When you install Windows and activate it with a specific product key, only one instance of WIndows is always linked to this PC.  A Windows license cannot be transferred to a second PC.  Each PC must have a single Windows license.  Only if you buy a different product key you can install and activate on another PC.

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• I placed a time limit on my AirPort Extreme and now I can not access my airport utility to disable, because I can not connect to the Internet?

  Unable to connect due to the delay of access and can not turn off the limit

  Airport the warm reboot... He will return to the default settings for 5 minutes so you can remedy.

• Hi, guys! My iphcone6 is icloud lock and now I can't use my phone, so how do I do?

  Hi, guys!

  My iphcone6 is icloud lock and now I can't use my phone, so how do I do?

  Need to unlock and start using it and if you can not unlock talk to the previous owner.

• Had to format my laptop and now I can't turn back the Adobe Acrobat Pro XI

  Had to format my laptop and now I can't turn back the Adobe Acrobat Pro XI that he keeps giving me a message that the serial number I have providede is valid but calling it a product was not found on this computer. I again downloaded the software installtion of my account page and sitill keeps making the same problem. Do I need a new license?

  Hijeanm9453734 ,

  Seems that Acrobat XI was an upgrade from the previous version. You need choose your earlier version of Acrobat, comes its serial key to activate the upgrade Acrobat XI.

  Kind regards
  Nicos

• I installed JZip and now I can not put my homepage of everything except the jzip search page. How to disable the functionality of jzip?

  I installed JZip and now I can not put my homepage of everything except the jzip search page. How to disable the functionality of jzip?

  See:

  • http://KB.mozillazine.org/about:config

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

• Re-installed Windows XP Media Center Edition and now I can't turn it on with my product key.

  I REINSTALL XP MEDIA CENTER EDITION

  AND I GOT A FEW SCRACHES ON DISK. SO I REPAIRED THE INSTALLATION WITH XP PRO. NOW I CAN'T ACTIVATE WINDOWS TO ALL THE... WHAT CAN I DO TO FIX THIS?

  original title: REINSTALLED XP MEDIA CENTER EDITION, HAD A GLITCH AND USED XP PRO FOR INSTALLATION of REPAIR, NOW I can NOT turn ON WINDOWS

  Upgrade installing XP Pro Media Center of in the Windows environment.  Just start the installation of XP Pro computer and then insert your Media Center CD in the CD-ROM drive and upgrade the installation, provide the Media Center product key when you are prompted.  If this fails, you will need to install from a flat folder, post again if the upgrade fails and we can give you the flat installation instructions.

  John

• My computer is stuck in "configuration updates: stage 3 of 3 0% complete.". Do not turn off your computer. It restarts just over and over again with the same message.

  I have a Dell Inspiron 1525 with Windows Vista, and I have tried the following to fix my endless reboot with the "Configuring updates: stage 3 of 3 0% complete.".  Do not turn off your computer. »

  • I inserted the cd 'Réinstallation DVD Windows Vista', but it won't pop up any kind of prompt for me to do something with it.  I tried putting the cd in what was on the computer and tried leaving him in and restart it - but the cd has no EFFECT.
  • I used the F8 key and I tried the following with no luck: safe mode, safe mode with network, safe mode w / command prompt, enable logging, last known good configuration (Advanced) boot and debug mode.  Most of these options make the monitor off (to make you think he will do something), then it just restarts and did the thing reboot loop again and again.
  • I also tried the repair your computer option to the F8 key.  He asks me to log in as an administrator (but my password does not work).  So, I use the menu drop down and choose the name of my computer and then use my password, and I can connect to "restoration of access options '.  Once I'm in the "System Recovery Options".  I tried the following with no luck: Startup Repair tool, restore the system, Windows complete PC Restore, Windows Memory Diagnostic tool and command prompt.  THE only ONE that I HAVE NOT YET TRIED it IS THE "DELL FACTORY IMAGE RESTORE", it's because I want to try to fix it without losing everything on my hard drive.  Here are the details of the I've tried in the "System Recovery Options".
  • The command prompt says: 32 X:\Windows\system > (I have no idea how to use it, but it's what he says)
  • The memory diagnostic tool reboots the computer, but nothing new happening (just reboot over and over again)
  • In the PC restore full Windows: I tried to put the Windows Vista CD in, but it can not find a valid backup location
  • When I click on the system restore: it is said: "no restore points were created on your computer's system disk.  To create a restore open system protection point.  When I click on the system protection, it is said: "your computer is running in a limited diagnostic State.  If you use the system restore in this limited State, you can't undo the restore operation.  Help topics are not available in this State. "  So I press OK, and I'm back to square one.
  • When I click on startup repair: it says "Startup Repair could not detect a problem.
  • I know there are many many posts on this problem, and I think I've tried all the suggestions on how to solve the problem, but they do not work for me.
  • PLEASE HELP ME!  I need my computer for my college work.  I can't borrow laptop my friend forever!

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• After Encrypting files, I had to reinstall my windows and now I can not decrypt the file

  * O.T. > encrypted files

  So after encryption of files I had to reinstall my windows (changed the name of the owner) and now I can not decrypt the file

  After attempting to decrypt the files, I'm promped with this message:

  Attribute application error

  An error occurred applying attributes to the file:

  driveletter\filename

  Access is denied. \

  I want to say that I added my administrator name in the Security tab, and then gave me full control over the files, but that did not work.

  Hello

  I understand that you cannot decrypt files previously encrypted in Windows 7 after you have reinstalled Windows.

  • What program did you use to encrypt the files?

  From now on, I would ask you to refer to similar questions discussed in the thread below links and check the status.

  Cannot decrypt previously encrypted files

  I'm unable to decrypt files encrypted after reformatting the hard drive.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• I've just updated to the latest version and now I can not manually type in the URL. I can't get to a new page if I click on a link.

  I've just updated to the latest version of Firefox 32.0.3 today and now I can not manually type in the URL. I can't get to a new page if I click on a link. I had to use - gasp - Chrome just to get to this help page!

  I tried to restart Firefox.
  I can type (not a keyboard problem), but the browser never tries to go to URL, when I hit enter

  Any ideas?

  Thanks - kept looking around and found a rec to make a reset of Firefox. This seems to have worked.

• I update my Firefox latest version 32.0, and now I can not upload anythink, can you help me

  I think that last week, I update my Firefox latest version 32.0, and now I can not upload anythink, can you help me - in more detailed - when I try to download a file and save it to my pc it remains on 99%, write the time unknown and not donwload, that is even if I try to open and file - means 'open' clieck not records. I try with different brouzer and quote different and everythink work very well. Problem is only on firefox. I try and that "in the address bar, type about: config and press ENTER." The subject: config "This might void your warranty!" warning page may appear.
  Click on I'll be careful, I promise!, to continue to the about: config page. A list of parameters must appear
  Filter the list by typing in the search bar at top. Enter scanWhenDone. Now you should find the preference "browser.download.scanWhenDone".
  Double-click this preference to set the value to false. "
  But still a problem.

  It's the recent9 b 32.0 and it has been fixed and will be in the build 32.0 then, probably the RC1 build 32.0 if normally such a fix would be a beta version as 32.0b10. The release is Tuesday next so little time. Type of topic: config location bar (address) and you can try to change the empty value of browser.safebrowsing.appRepURL in the meantime. If an empty value does not work then put in https://sb-ssl.google.com/safebrowsing/clientreport/download?key=%GOOGLE_API_KEY%

  For not not reading the useful comments are bug / spam.
  Bug 1057764 - Download Manager regression in the update of FF32 beta 9

• To transfer my files, some have been modified to WPS and now I can not open them. What is?

  Original title: WPS

  They gave me a new laptop for Christmas, to transfer my files, some have been modified to WPS and now I can not open them. I am moderately OK on the computer and told to convert the files to something else... OK?  What?  How? If you can help please, I'd appreciate it.  They are important files for me. Thank you.

  Hello

  . WPS files can be opened with Microsoft Works, Microsoft Word, Word Viewer, or can be converted
  other formats.

  . WPS file extension
  http://www.FileInfo.com/extension/WPS

  How to open a WPS file
  http://www.online-tech-tips.com/MS-Office-Tips/open-wps-file/

  Microsoft Word Viewer
  http://www.Microsoft.com/download/en/details.aspx?ID=4

  ZamZar - free - convert wps (Microsoft Works) files to doc, odt, txt, and pdf
  http://blog.Zamzar.com/2007/04/23/convert-WPS-Microsoft-Works-files-to-doc-ODT-txt-and-PDF/

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• has taken a hard drive from a HP pavillion laptop and I put it on a Toshiba laptop and now I can not activate

  I took a hard drive from a HP pavillion laptop and I put it on a Toshiba laptop and now I can not activate it and its telling me that windows is not genuine but also telling me that my product key is incorrect. I maybe need to all system files and things for a Toshiba.How can solve this problem?

  Hello Eduardo Montoya when you traded player having Windows installed on it? If so you will not be able to activate the operating system is an OEM manufacturer and will only work with the original system. If it is a retail facility, you will need to use the phone activation steps listed in the link below. Let me know if it helps. Thank you.

  Windows XP

  http://support.Microsoft.com/kb/307890

  Windows Vista

  http://support.Microsoft.com/kb/940315

  Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer