Defender system BSOD error

Similar Questions

• BSOD error: IRQL GT ZERO at THE SERVICE of the SYSTEM

  Hello

  I have known many BSOD errors since last year. I tried to install a new copy of Windows, but the problem is still going.

  I read some responses who blame Bitdefender here, but I want to confirm by sending my dumpfiles before complaining to them, can you help me?

  I also read something related to this on Bitdefender forum http://forum.bitdefender.com/lofiversion/index.php/t48376.html, but I think that's exactly my problem. However, I installed the patch mentioned, but still have not tested its effectiveness... Could this hotfix (http://support.microsoft.com/kb/2664888) solve my problem?

  Here is the link to my dump files and msinfo32: http://www.4shared.com/rar/J0al3nomba/Minidump.html

  Thank you in advance.

  Renato Rigotto.

  Hello Renato.

  Thank you for the update on the issue and if problem continues try to follow these methods and check if it helps.

   

  Method 1:

   

  Select last good known in Windows Advanced options and check if that helps. To do this, restart the computer and press the F8 key for about four to five times. You will see the that last known good Configuration in the advanced options of windows. Please select last known good Configuration and then press enter.

   

   

  http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

   

   

  Method 2:

   

  You must disable the auto restart in case of failure system on your computer and note the error message receive you on the blue screen and you need to post back to us.

  To do this, you must start your computer on the Advanced Boot options , and select Disable automatic restart in case of system error.

  See this link to start your computer in Advanced startup options.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

   

   

  Method 3:

  I suggest to follow the steps described in the article and check if this can help resolve the issue:

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Watch DRIVER BSOD error - STATE-FAILURE of CURRENT

  Hi, I have Windows 8 in HP Pavilion G6. Problem and a large number of errors are occurring in my laptop. I have refreshed, restored, reset and re-installed my Windows several times. Most of the problems occurred in the Bluetooth driver. Every time after that resetting or refreshing, Bluetooth my work for 2-3 days and then she also stops working. Also scanned my system with Norton internet security and Microsoft Windows Defender and Third-software No. third are installed in my system. Can someone help me with this problem? I downloaded the Minidump files on SkyDrive ( https://onedrive.live.com/redir?resid=22D347B8F78B247D%21167 ) caused due to the blue screen (BSOD error shows PILOT - STATE-FAILURE of CURRENT)

  Original title: blue screen of death in Windows 8

  9F error checking, {4, 12 c, fffffa8007b4e200, fffff8015e8a8780}

  WARNING: Unable to verify timestamp for win32k.sys
  ERROR: Module load completed but symbols can be loaded for win32k.sys
  Probably caused by: memory_corruption

  DRIVER_POWER_STATE_FAILURE (9f)
  A driver is causing an inconsistent power state.
  Arguments:
  Arg1: 0000000000000004, the change in diet has expired waiting to synchronize with the Pnp
  subsystem.
  Arg2: 000000000000012c, the time-out in seconds.
  Arg3: fffffa8007b4e200, the thread that currently holds the lock of Pnp.
  Arg4: fffff8015e8a8780

  Bug Check 0x9F: DRIVER_POWER_STATE_FAILURE.

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff559329 (v = vs. 85) .aspx

  Resolution error blue screen in Windows.

  http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  Uninstall Norton and turn on Windows Defender.

  Norton Removal Tool.

  https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us

  How to turn Windows Defender real-time Protection on or off in Windows 8 and 8.1.

  http://www.eightforums.com/tutorials/21967-Windows-Defender-protection-turn-off-Windows-8-a.html

  Uninstall and reinstall all the network drivers, including Bluetooth.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=5189545#n617

  Note: Please confirm that the model in the above link is yours, before continuing.

  In addition,

  Please download a copy of your system information file. Click 'Start' , type "msinfo32" , click on "file" at the top of the page, select "Export" and enter a name for the file and click 'Save'. " Navigate to the file and download the text file generated in a public folder on your onedrive and post the link here.

• Vista - Windows Update fails and defender gives the error code: 0 x 80080005

  Well, I downloaded Veoh Web Player and DivX player (with a driver package) almost the exact same time, so I don't know who caused the problem. (Guessing Veoh done.) I restored system which usually solves it for me and then uninstalled both programs and even if my computer is not nearly as slow as it was when they were both installed, it's always problems. Windows open frequently stops responding. As I said, the system restore only makes it better for a short time while longer I go without eating, the freezier my computer becomes. I also noticed that for about 2-3 days (after which my computer almost completely freezes and I have to startup repair) most minor cosmetic changes.

  I use Firefox, so the first change I noticed was that left side of the address bar in a small half circle in a regular square. Tiny. Then the scroll bars on all the programs I've used lost their Aero look and returned to normal, old style Windows. Eventually good menus click lose their new look, then all the start menu, and finally Windows Explorer stops working and all the windows, when not in use, become small tabs at the bottom of the screen. After that the computer hangs almost entirely.

  Each time I restart or system restore the first thing I see is a little box that says that a Windows host process has stopped working. Windows Update continually fails and Windows Defender gives the error code 0 x 80080005. What can I do? I looked for answers before coming here to help and what I read it looks like a downloaded driver can interfere with the host process, even if I uninstalled it (supposedly) all. Thank you.

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. now to reset Windows Update by...

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer only;] Run the difficulty in DEFAULT and AGGRESSIVE mode]
  http://support.Microsoft.com/kb/971058

  5. restart & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Displaying the right information to get a BSOD error help

  When your computer crashes and displays a blue screen there are often very valuable information about the photo that will allow users to help you solve your problem and to know what is causing this blue screen appears.

  Looking at the image at the end of the article you will see two sections highlighted, you will always want to post this information in your forum thread when looking for help she will be the most critical part of troubleshooting. The top tells us what's happening and said background where it goes to. We have just responded to two of the most important issues when you try to solve a problem.

  What's not?

  Where is the problem isolated to?

  Most of the text is quite annoying, but if that's important to you then it may be important for us. We have all seen what looks like a BSOD, but we do not know what your BSOD.

  There are more important questions that you can answer that will help your troubleshoot BSOD error message.

  1. What is your system brand and model? We know that you have an HP computer, but there are tons of computers. We need to know your specific model to ensure you use the appropriate drivers and we recommend the proper drivers.
  2. What is your version of Windows and the Service pack?
  3. Are you running a 64 bit or 32 bit OS?
  4. What is your Internet browser and version?
  5. Does your system use IDE or SATA disk drives?
  6. What virus protection software and current malicious software do you use? Is up to date?
  7. The issue occurred after an interruption of the power supply as an abnormal termination or power failure?
  8. What has changed recently?
  9. Does this happen often you can effectively reproduce the problem? If you can easily reproduce what steps can you take to reproduce the problem.

  Here is a list of the most common mistakes of the BSOD you can see

  • Stop 0 x 00000003 UNSYNCHRONIZED_ACCESS
  • Stop 0x0000000A IRQL_NOT_LESS_OR_EQUAL
  • Stop 0x0000001E KMODE_EXCEPTION_NOT_HANDLED
  • Stop 0 x 00000023 FAT_FILE_SYSTEM
  • Stop 0 x 00000024 NTFS_FILE_SYSTEM
  • Stop 0x0000002E DATA_BUS_ERROR
  • Stop 0x0000003F NO_MORE_SYSTEM_PTES
  • Stop 0 x 00000044 MULTIPLE_IRP_COMPLETE_REQUESTS
  • Stop 0 x 00000050 PAGE_FAULT_IN_NONPAGED_AREA
  • Stop 0x0000006B PROCESS1_INITIALIZATION_FAILED
  • Stop 0 x 00000073 CONFIG_LIST_FAILED
  • Stop 0 x 00000074 BAD_SYSTEM_CONFIG_INFO
  • Stop 0 x 00000076 PROCESS_HAS_LOCKED_PAGES
  • Stop 0 x 00000077 KERNEL_STACK_INPAGE_ERROR
  • Stop 0 × 00000079 MISMATCHED_HAL
  • Stop 0x0000007A KERNEL_DATA_INPAGE_ERROR
  • STOP 0x0000007B INACCESSIBLE_BOOT_DEVICE
  • Stop 0x0000007E SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  • Stop 0x0000007F UNEXPECTED_KERNEL_MODE_TRAP
  • Stop 0x0000008E KERNEL_MODE_EXCEPTION_NOT_HANDLED
  • Stop 0x0000009C MACHINE_CHECK_EXCEPTION
  • STOP 0x0000009F DRIVER_POWER_STATE_FAILURE
  • Stop 0x000000BE ATTEMPTED_WRITE_TO_READONLY_MEMORY
  • Stop 0x000000C2 BAD_POOL_CALLER
  • Stop DRIVER_VERIFIER_DETECTED_VIOLATION 0x000000C4
  • Stop 0x000000CA PNP_DETECTED_FATAL_ERROR
  • Stop 0x000000CB DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS
  • Stop 0x000000CE DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS
  • STOP 0x000000D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL
  • Stop 0x000000D5 DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL
  • Stop 0x000000D8 DRIVER_USED_EXCESSIVE_PTES
  • Stop 0x000000DA SYSTEM_PTE_MISUSE
  • STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER
  • Stop 0x000000ED UNMOUNTABLE_BOOT_VOLUME
  • Stop 0x000000F2 HARDWARE_INTERRUPT_STORM
  • Stop 0x000000F4 CRITICAL_OBJECT_TERMINATION
  • Stop 0x000000FC ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
  • STOP 0x000000FE BUGCODE_USB_DRIVER
  • Stop 0xC0000218 UNKNOWN_HARD_ERROR
  • STOP 0xC000021A STATUS_SYSTEM_PROCESS_TERMINATED
  • Stop 0xC0000221 STATUS_IMAGE_CHECKSUM_MISMATCH
  • STOP 0xC0000244 STATUS_AUDIT_FAILED

  

  This thread is purely an informative thread. If you are experiencing a BSOD error please create a new thread ensure you provide information that questions on this thread.

  While many BSOD errors may be troubleshooting-made the same way, there is an amount of many of them and they should be troubleshoot-carried out on their own.

  If you have anything else you want to add or general BSOD issues then you can post them here, but if you ask about anything that requires real troubleshooting it should be in its own thread.

• Try opening Windows Defender me gives error code: 0x800106ba - a problem caused this program service stop. Help, please.

  Hi all

  I am a newbie with doozy a bit of a problem:

  Services of Windows Defender on my local computer no longer works.  The message I get is:

  «Windows Defender encountered an error: 0x800106ba.» A problem caused this program service stop.  To start the service, restart your computer or search help and Support to find out how to start a service manually. »

  I restarted my computer nothing works.

  I followed the advice from another thread in the following way: go to the control panel > click on Administrative Tools > Services > Windows Defender properties > change initially > press on apply.  It seemed that he would work until the following message appeared:

  "The Windows Defender service on Local computer started and then stopped.  Some services stop automatically if they are not in use by other services or programs. »

  Any help, help, clarity on this issue...?

  Thank you very much! :]

  This problem can occur because another security application is used or the Windows Defender service has stopped, or components of Windows Defender are corrupt.

  You install any new programs recently? Windows Defender is not designed to protect against the extent of malware. If programs like Microsoft Security Essentials or AVG 9 and Windows Defender both run, your system may experience degradation in performance and other problems caused by the conflict of two services providing real-time protection at the same time. I recommend that you keep the Defender off if another application of security protection is running. These security software stop windows Defender work properly in order to prevent conflicts.

  If no similar security application is installed, I suggest that we have follow these steps to resolve the problem:

  Step 1: Check the Windows Defender service
  =================================
  1. click on start, in the search box, type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. double-click on the service "Windows Defender".
  3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Click on apply. Then please click on "Start" under "Status of Service" to start the service.

  If the problem is not resolved, please refer to step 2:

  Step 2: Save the associated DLL files
  ========================
  1. click on start, type "cmd" (without the quotes) in the box start the search. Right click on CMD listed above and click 'run as administrator '.

  2. in the command prompt, type the following and press ENTER to each order:

  regsvr32 atl.dll

  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 softpub.dll
  regsvr32 mssip32.dll

  3. close the command prompt, and then run Windows Defender.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I turn on Windows Defender I get error: 0 x 80070424.

  I try to use Windows Defender. When I turn it on I get an error message... Windows Defender encountered an error Ox80070424. The specified service does not exist as an installed service.

  Can someone help me with this problem?

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Wmp54g driver RT2500.sys causes BSOD error: driver_ not_les_than_ friezer less_ or_ equality

  Try to install WMP54G v4.0 on XP SP3.

  I tried all three PCI connectors.

  Remove the Chuck RT2500. SYS system starts.

  Put back and BSOD error: driver_irql_not_less_or_equal

  (Mod Note: published subject to keep stretching threads.) (Thank you!)

  Resloved problem with the Ralink instead of Linksys driver.

• I have no other protection other than that which came with windows, I can not turn on Windows Defender, I get "error: 0x8007054b4.

  My OS is Vista, I have a HP laptop its about 3 years old. When I try to turn on windows Defender I get:

  Windows Defender met a
  error: 0x800705b4.
  This operation returned because the time limit has expired.

  Hello

  Defender is not sufficient protection

  you need to install antivirus protection

  you would have had a free trial for a new AV subscription

  This program must be removed before installing another AV

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

  either of these programs free antivirus try after removing any trial that is always installed

  use the free version of either Avast

  http://www.avast.com/free-antivirus-download#TAB4

  or Microsoft Security Essentials

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=e1605e70-9649-4A87-8532-33d813687a7f

  scan your system for malware;

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• startup programs do not work and windows Defender is disabled (error code is0x800106ba)

  I can't turn on windows defender and the error message is (windows Defender encountered an error: 0x800106ba.) A problem caused this program service stop. restart the service to start your search in Help and support or your computer how to start a service manually)

  I restart my computer but I don't know how I can start it up manually

  Thank you

  Hello

  Are you running MSE or other antivirus/security programs stop Windows Defender running?
  Some people are MSE (which also includes the Defender), McAfee, AVG, Norton and others.

  ------------------------------------------------

  Troubleshooting of Windows Defender
  http://support.Microsoft.com/kb/555957

  "%ProgramFiles%\Windows Defender\MsAsCui.exe" is the folder of the default Defender

  Start - type in the search box-> Windows Defender - find top - make a right click on it.
  RUN AS ADMIN

  If no joy using Start - computer or Windows Explorer to access this folder and create a
  Shortcut to put on the desktop and the Start Menu. You can also right click on a shortcut this and
  see if they point to here.

  Goal
  "%ProgramFiles%\Windows Defender\MsAsCui.exe".

  Start in
  "%ProgramFiles%\Windows defender.

  How to enable or disable the Windows Defender
  http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

  --------------------------------------

  Maybe something here if necessary:

  What is display / causing the error message? Some anitvirus/security/antispyware products can
  cause this error. On those who use you, including those that your never had even those
  uninstalled (the remnants can cause problems). McAfee is just an example of what many can do.

  Start - type in the search box - Services - find top - Right Click - Run as Admin

  Windows Defender - value STARTED and AUTOMATIC

  or set MANUAL and STOPPED if necessary

  Fix for the problem of 800106ba.
  http://support.Microsoft.com/kb/931849

  Error (an example) of McAfee report.
  http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch

  Check also:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

  ============================================

  Other ways to control startup programs:

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns shows you the full list of registry and file locations where applications
  can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• BSOD errors, seeking help narrowing of the cause

  A quick overview - I've been "gifted" a site with about 250PCs to manage.  From the beginning of the contract (before my time), they have random BSOD errors and a few other programs that I am trying to sort now that I'm responsible for everything.

  The issue is that when the user to log in and begin to open programs, or sometimes during the initial connection, the system will blue screen and they reboot.  To restart the system in general will allow them to connect you and start working.  Other times it can happen 2 - 3 times before the system decides to cooperate.

  I started the collection of mini dumps memory.dmp and msinfo for systems after sorting what I could of BSOD Viewer (which only the States, it's a question about memory, but all searches are futile determine exactly what the cause.)

  Here is a link to the 2 systems, that I'm watching, hoping someone can do the same a fraction of light to help solve this problem.  Users have dealt the question, at least 1-2 years, I've been here since February and I'm about to start pulling my hair (what little I have excluded).

  Thank you all!

  fffff880 '066 d 3398 fffff880' 04c 48130 * ERROR: Module load completed but symbols could not be loaded for mfeaack.sys
  mfeaack + 0 x 48130

  fffff880 '066cde68 fffff880' 01151c4a * ERROR: symbol file could not be found.  Defaulted to export symbols for mfehidk.sys-
  mfehidk + 0x68c4a

  McAfee and graphics card intel are mentioned in the two systems. I suggest you uninstall mcafee and running the tool of cleaning, found in the link below.

  Recommended methods of removal of Windows: Windows 7

  http://Windows.Microsoft.com/en-us/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  Download the tool Development http://us.McAfee.com/apps/SupportTools/MCPR/MCPR.asp

  If you continue to have problems after you remove Mcafee, uninstall and reinstall your driver intel graphics.

• "Windows 7 x 64 BSOD error" BCCode: 3B.

  Hey guys. I just started using this new laptop and did a few mines gold intensive CPU with it.

  My laptop in general is idling at 140 degrees F but it seems to hold up. These blue screens seem to happen at random times while botting, usually 6 to 12 hours in it.

  I recently installed Windows 7 Ultimate on this disc have previously windows 8. This laptop really doesn't have a lot of programs too, I just have the basics and use it for heavy agriculture.

  BSOD error

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 3B
  BCP1: 00000000C 0000005
  BCP2: FFFFF960001D07AB
  BCP3: FFFFF8800BFDB1B0
  BCP4: 0000000000000000
  OS version: 6_1_7600
  Service Pack: 0_0

  Product: 256_1

  Thanks for reading

  First step is to upgrade to Service Pack 1.  In itself, that can solve the problem.  If she does not see below

  Service pack 1 update.
  
  http://Windows.Microsoft.com/installwindows7sp1

  Learn how to install Windows 7 Service Pack 1 (SP1)

  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1
  
  Additional resources:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1
  http://Windows.Microsoft.com/troubleshootwindows7sp1

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.

  In other words STOP! If you don't know what it means that you're probably not  

  
  

  
  

  1-Driver Verifier (for full instructions, see our wiki here)

  
  2-Memtest. (You can learn more about running memtest here)

• BSoD - error DRIVER_OVERRUN_STACK_BUFFER and chart use disc in the Task Manager showing constant 100% graphic

  All of sudden it began to show "BSoD - error DRIVER_OVERRUN_STACK_BUFFER" and while the system is turned on, it displays "chart use disc in the Manager of tasks showing constant 100% graphic.

  Friends, this is

  IT HAS THE FILE INFO MINIDUMP AND ZIPPED SYSTEM.

  Please go through it and help me friends :(

  SkyDrive link: https://onedrive.live.com/redir?resid=3CFADFC6344DFA0A%21263

  It worked, thanks!

  All attached files of the DMP are the verification of bug DRIVER_OVERRAN_STACK_BUFFER (F7) .

  This indicates that a driver has saturated a stack-based buffer.

  A driver invaded a buffer based on the stack (or a local variable) in a way that would have replaced the function's return address and jumped to an arbitrary address when the function returned.

  2: kd > k
  Call child-SP RetAddr site
  fffff880 '192edc58 fffff880' 03da0f6e nt! KeBugCheckEx
  fffff880 '192edc60 00000000' WinFLAdrv + 0x3f6e 000000f7
  fffff880 '192edc68 00fff880' 6d2ebda0 0xf7
  fffff880 '192edc70 0000f880' 03da3019 0x00fff880'6d2ebda0
  fffff880 '192edc78 ffff077f' fc25cfe6 0x0000f880'03da3019
  fffff880 ' 192edc80 00000000 00000000 of ' 0xffff077f ' fc25cfe6

  WinFLAdrv.sys invaded a buffer based on the stack, so called bug control. It is a pilot

  associated with the Service of NewSoftwares.net WinFLAdrv.sys Application. Uninstall ASAP!

  Kind regards

  Patrick

• Windows BSOD error

  Hello

  These days I often BSOD error ' DRIVER_IRQL_NOT LESS OR EQUAL (tcpip.sys) and even I am unable to copy or zip the dump file, it saying: access denied.»

  Please help me

  Hello

  To help you, we will need for the. DMP files to analyze what exactly happened at the time of the accident, etc.

  If you do not know where. The DMP files, here's how to get to them are:

  1. go to the folder % systemroot%\Minidump.

  2 copy all the DMP files in the Minidump folder on your desktop and zip then those files.

  -If she always says that you have not the permission, you must Take Ownership- http://www.eightforums.com/tutorials/2814-take-ownership-add-context-menu-Windows-8-a.html

  3. download the zip containing the. Files DMP Onedrive or a Web hosting of your choice and paste it in your answer. Favorite sites: Onedrive, Mediafire, Dropbox, etc.. Anything with waiting-timers.

  4 (optional): The type of. DMP files in the Minidump folder are known as small images of memory. In any % there will be what we call a kernel image (if your system is configured to generate). It is labeled MEMORY. DMP. The difference between the small images of memory and core-dumps in the simplest definition is that a kernel image contains much more information at the time of the accident, which allows more debugging of your question. If your upload speed and you're not going against any strict caps bandwidth and/or use, etc., the kernel image is the best choice. Note that the core-dumps are much larger in size due to containing much more information, that's why I mentioned the download speed, etc..

  If you plan to use Onedrive but don't know how to download it, please see the following:

  Download pictures and files to Onedrive.

  Please note that all programs "cleaner" such as TuneUp Utilities, CCleaner, etc., default will remove. DMP files after use.

  If your computer does. DMP files, follow these steps:

  1. start > type systemroot which should show the Windows folder, click it. Once inside this folder, make sure there is a Minidump folder created. If not, CTRL-SHIFT-N to create a new folder and name it Minidump.

  2 Windows key + Pause key. This should appear in the system. Click Advanced on the left system settings > advanced > performance > settings > advanced > make sure there is a check mark for "manage automatically the size of pagefile for all readers."

  3 Windows key + Pause key. This should appear in the system. Click Advanced on the left system settings > advanced > startup and Recovery > settings > system > ensure there is a check mark next to "write an event to the system log.

  Make sure Small Memory Dump is selected and ensure that the path is % systemroot%\Minidump.

  4. ensure that viewers is ENABLED:

  Start > Search > type services.msc > on the name tab, search for Windows Error Reporting Service > if the service status is not started, then right-click and select start. Also to ensure that, under Startup Type set to automatic rather than manual. You can do this by right click, select properties and under general selection on 'Automatic' startup type and then click on apply.

  If you can not get into normal mode to do this, please do so via Safe Mode.

  Kind regards

  Patrick

  Thank you very much for your help...

  I found the reason why is because of Anti-Malware software and I uninstalled that. All is well now

• BSOD error in netio.sys and tcpip.sys

  I m getting BSOD error in my computer laptop .These are becoming frequent in the last days. (facing the question 19 times in 4 days and more in a recent past :(). The error messages I m is either, or one every time:

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (tcpip.sys)

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (netio.sys)

  I upgraded to 8.1 obtained previously, mistakes there too. Even then to restore pc to factory setting did not help much.

  the zip file containing the dump files: https://skydrive.live.com/redir?resid=149D0B300A7B40AE! 476 & authkey =! AMmveZAUcI_6TUQ&ithint=file%2c.rar

  Please help me with this question...

  SA

  When the auditor has been activated, it did not the pilot.  Please change the driver set to 'all', because it will give us a better chance to catch him.  It will slow down the computer a little.

  I would also like to run a file system check

  Please run a check of system files (SFC) 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files