Watch DRIVER BSOD error - STATE-FAILURE of CURRENT

Similar Questions

• Driver vista Power State failure Blue Screen of Death

  Please help me I think it's that I'm doing this... What is going on.. I have replaced the ram and video card, but has seen this problem before I did it... also just reinstalled windows vista... Please help https://skydrive.live.com/redir.aspx?cid=7cbac7e09f2ecb07&resid=7CBAC7E09F2ECB07! 105 & Thierry = 7CBAC7E09F2ECB07! 101 & authkey =! AEE_idLDpolnFKY

  Hello

  Those showed all CAUSE as a Windows component that means something different it led into error.
  Then ZIP or RAR the actuall minidump files and download them on SkyDrive and post a link here for us
  to analyze the other.

  Check this KB:

  The shutdown process does not terminate and you receive an error message on a computer that is
  running Windows Vista or Windows Server 2008: "Stop 0x0000009F"
  http://support.Microsoft.com/kb/972109

  ----------------

  You use Roxio or Nero programs? They have been known to cause this problem even
  If they worked well for a long period of time. If so check with their support.

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  This "might" be a power problem, even if this isn't the most common cause - in this case
  It seems that the PSU could be the fault.

  9F is probably a driver issue. Security/antivirus/antispware programs can also cause these issues.
  Have you added the recent devices or the updated drivers - don't forget to check in the Windows updates to see
  If a driver has been updated before this happen. This can also be caused by a loose card or cable
  and even a weak power supply.

  This error means that a driver does not properly support the power state. Check in Control Panel - device
  Manager to ensure that the drivers are not stop during sleep - double-click adapter - NETWORK adapter
  and WIFI - healthy and others - tab power management - uncheck allow the computer to turn off.
  Maybe the only has a problem.

  Start - type in the search - find MSCONFIG in top - right, click on – RUN AS ADMIN

  General tab - tick this box start Diagnostic - APPLY / OK - REBOOT

  Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
  (and it might still be video interacts with something else). See following message for my
  generic driver update methods.

  BCCode: 9F 0x0000009F<-- read="" this="">
  * 1167.html? order = date http://www.faultwire.com/solutions-fatal_error/Driver-Power-State-Failure-0x0000009F-

  ==========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• BSOD pilot State failure

  Hi all

  I get BSOD intermittently showing driver power state failure in all cases that I see.  I have a HP tx2000z, 2 GB, running Vista Ultimate.  I know of minidumps, but don't know how to look at them, or seen what I'm looking for.  Tried to do it in Windbg, but as I recall he said that I didn't leave after flashing a command prompt window very quickly.  Also tried to roll back as soon as possible, no luck.  No new installs of hardware.  May began after update to the last large windows.  It's something that I can probably fix it, or I'd be wise just to buy a new computer at low prices?  Y there is it possible just to install a windows 7 can actually solve the problem?  Someone at - it suggestions?

  Sorry if this isn't in the right place, please inform if not.

  Thanking you in advance for helping me fix my computer with aplomb, or dish being honest enough to tell me there is really no way to ever find what is actually wrong with it, unless I have spend most of my life in the effort.
  Bill

  bcs42756,
  Thank you for visiting the Microsoft Answers community forum.

  It says error you found a driver that is not normally compatible with Vista, however, that the error only occurs when the computer enters standby or hibernation or wake up from standby or hibernation.

  You have the external devices connected to the USB or Firewire ports?  If so, disconnect one at a time and see if the problem goes away.  If Yes, then you have found the culprit.

  Try using the selective startup for troubleshooting method to see if you can identify the driver that could be the cause of the error:
  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  If this does not work, let know us and we'll go from there.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Power driver - 8 victory State failure

  I bought a Lenova Ideapad a few months ago and have recently been using it more regularly. All of a sudden I'm getting blue screened when he returns to mode 'sleep' and get the error message "driver power state failure." and it takes forever to do restart and operation. I have just installed new software on this computer at this point, except for a flash, and PDF Creator is certainly not likely to be what is running at this point. Very frustrating that a voluntarily bought this machine because of his thought of SSD I was getting something reliable that could start quickly.

  Admin edited the title of the topic.

  
  

• Hi guys, im facing the same problem, if my computer if it remains unused, it fails and I get the error: State failure driver.

  I'm using windows 7 64-bit proferssional, pls help.

  Hi Rayan,

  Thanks for posting your question in the Microsoft Community.

  Blue screen errors can occur if a problem causes Windows 7 to stop or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."

  These errors can be caused by hardware and software issues, and it can be difficult to solve the problem. The following methods and tools can often help get Windows running again.

  . Did you recent hardware or software changes to your computer before the show?

  I suggest you remove all external devices except the keyboard and mouse and check if it helps.

  I also suggest you follow the steps mentioned in the link which can help you in the matter of fixing:

  Resolve stop (blue screen) error in Windows 7:

  http://Windows.Microsoft.com/en-GB/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Warning: Before performing a reinstallation of Windows 7, should be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before you reinstall the operating system.

  You can also download the last dump file so that we are able to help you. C:\windows\Minidump

   

  You can use Windows Explorer and copy the dump files to your desktop or your personal documents folder. Then download them to your Sky Drive folder.

   

  If you are not able to find the dump file, and then check if it has been activated. To so proceed as follows:

   

  a. click Start, point to settingsand then click on Panel.

  b. double-click on System.

  c. click on the Advanced tab and then click settings under start-up and recovery.

  d. in the Write debugging information list, click on image partial memory (64 KB).

   

  Send a copy of your dump file in a shared file on your disc of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  To change the folder location for memory dump files, type a new path in the dump file box (or in the directory of small box discharge, depending on your version of Windows). You can go through the link for more information

  http://support.Microsoft.com/kb/254649

   

   

  If you need further assistance on this topic, let know us and we will be happy to help you.

• Power driver - Windows 8 State failure

  I use a Windows 8 on a Sony Vaio laptop.

  The laptop constantly crashes with a blue screen that displays the message DRIVER_POWER_STATE_FAILURE.

  I have no idea why. Can someone please?

  I enclose two files of different dates mini dump that is available in this link

  https://onedrive.live.com/redir?RESID=619CCA3A4EA95883%21476

  Concerning

  Hello

  DRIVER_POWER_STATE_FAILURE (9f)

  This bug check indicates that the driver is in an inconsistent or invalid power state.

  > [16, 2] e1 0 fffffa8005ef1290 fffff801c8f3b45c-fffffa8006040530 00000000 success error cancel pending
  \Driver\nvlddmkm nt! PopRequestCompletion

  Video driver nVidia's driver that blocks the PRI for too long.

  ------------------------------

  1. make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  2 remove and replace AVG with built-in Windows Defender from Windows 8 for temporary troubleshooting purposes, as it is probably cause conflicts:

  -AVG removal http://www.Avg.com/us-en/utilities

  Windows Defender (how to activate after removal)

  A. go toControl Panel (with icons). You can do this by typingStart > Search > Panel. Once in the Control Panel change the drop-down menu of thecategory to large or small icons.

  (B) among the list of icons, and then click Action Center.

  C. assuming that the deletion of your previous anti-virus software went correctly, you will notice to unexpected and spyware software (important) protection and Virus protection (important), it will be a button labeled turn on now. Click on this button (no matter that, as Windows Defender is as well used in Windows 8/8.1).

  Kind regards

  Patrick

• W3 - 810 driver Power State failure error (BSOD)

  I have a W3-810 Iconia I've upgraded to Windows 8.1 and Windows 10. During a recent update to the 2016 office, I had a blue screen and an error message that a failure of State driver had taken place and the computer needed to restart. After a few moments, the computer restarted and I was able to complete the installation of Office 2016. I remember getting this error during upgrade to Windows 10. Recently, while watching a YouTube video, the Tablet locked up and I got the blue screen again, with the same "Driver Power State Failure" error again. I check the Device Manager and noticed that in the "system devices" all of the "Intel platform dynamics and thermal framework (DPTF)" associates pilots had yellow flags indicating that the drivers did not work properly. When I tried to update the drivers I get a message that the latest drivers are installed.

  Someone at - it recommendations to solve this problem? Should I uninstalled all the drivers DPTF and reinstall? Thank you.

  Update: I drove all DPTF drivers in back to version 6.2.9200.30457 Device Manager and then restarted the computer. I tested the computer to see if I could cause a BSOD pilot State failure occurred earlier today and it does not happen again. I hope that this solves the problem. Thank you.

• BSOD driver State failure when you watch the video

  I got BSOD pilot State failure whenever I watched the video after 1 or 2 hours I'm not a pro so I don't know what to do with the minidump, here's my minidump files files:
  https://SkyDrive.live.com/embed?CID=8199191289DEAD64&RESID=8199191289DEAD64%21107&AuthKey=ALCI_45IBfZNPIQ

  Hanansyafira

  They are related to bftpdskc64.sys TurboPC DiskCache pilot of BUFFALO Inc. doing iAstor.sys crash

  I would like to delete TurboPC and iAstor update the latest driver (yours is 4 years old)

• Driver power state failure Acer V3 571 G

  Hello!

  I use my Acer V3 for more than six months, and recently my computer started to plant several times gives me error: State failure driver. I read it's an incompatible driver in the cause, but I'm not sure. Sometimes when I watch YouTube videos, 360 p (my internet is slow). The video stops and then the cursor stops responding while the sound of the video continues. Shortly after, I find myself on a BSOD. How can I fix?

  What is your GPU and what version of your drivers. If you have updated your drivers when it started to happen probably you need to get them off.

  https://forums.GeForce.com/default/topic/389688/GeForce-drivers/NVIDIA-statement-on-TDR-errors-Displ...

  Check this too this is probably the problem with gpu drivers.

• BSOD, driver power state failure

  I'm having a recurring problem with a laptop of mine where I get about 50 or if BSOD errors in a 24 hour period. They are all related to the driver ntoskrnl.exe (ntoskrnl.exe + 75bc0). This issue does not seem to get everything working in Mode safe.

  I've seen some posts regarding this, but I have not seen any allusion to the ntoskrnl.exe + 75bc0

  System details:

  OS Windows 7 Ultimate SP1 build 7601

  Model Toshiba Tecra M9

  Any advice on how to solve this problem would be appreciated.

  Johnathan

  It seems that you have 2 problems.  The vast majority of these accidents was related to your vgapgp.sys driver that s used for your monitor.  I re-install the driver completely and run a file system check

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 
  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

  The other problem is related to netw5v64.sys Wireless WiFi Link Driver of Intel Corporation.  Yet once completely remove the current driver and install the latest driver available.

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  0: kd >! devobj fffffa8001871460
  Object Device (fffffa8001871460) is:
  Can not read information from nt shift! ObpInfoMaskToOffset
  \Driver\vga DriverObject fffffa8002a8bbb0
  Current PRI 00000000 RefCount 0 Type 0000001c Flags 00003044
  DevExt fffffa80018715b0 DevObjExt fffffa8001871680 DevNode fffffa8004737d90
  ExtensionFlags (0000000000)
  Features (0x00000100) FILE_DEVICE_SECURE_OPEN
  AttachedDevice (top) fffffa80018782e0 \Driver\monitor
  Queue is not busy.
  0: kd >! devstack fffffa8001871460
  ! DevObj! DrvObj! DevExt ObjectName
  fffffa80018782e0 \Driver\monitor fffffa80045edb70 InfoMask field not found for _OBJECT_HEADER to fffffa80018782b0

  > fffffa8001871460 \Driver\vga fffffa80018715b0 cannot read the offbeat info from nt! ObpInfoMaskToOffset

  ! DevNode fffffa8004737d90:
    DeviceInst is 'DISPLAY\Default_Monitor\5 & 275C 28 & 0 & 12345678 & 01 & 00 '.
  ServiceName is "monitor".
  0: kd >! drvobj fffffa8002a8bbb0 f
  fffff80002a3c1d0: failed to get the value of ObpRootDirectoryObject
  fffff80002a3c1d0: failed to get the value of ObpRootDirectoryObject
  Driver (fffffa8002a8bbb0) is intended to:

• Driver Power State failure win 8 ativ 500 t

  Driver Power State failure win 8 ativ 500 t.

  also had this error after a reboot after microsoft updates.
  Here is my landfill.
  https://SkyDrive.live.com/redir?RESID=B8DCDEC64FBC0776! 9501 & authkey =! AK7ABb4NcCUakaU

  Moved from windows to the surface.

  Greetings PolishMario,

  Please check with Samsung as they are making the Ativ. I pulled their support for you link here:
  http://www.Samsung.com/us/support/owners/product/XE500T1C-A01US

• Qosmio X 870 - 14 d driver Power State failure Win 8.1

  Well I try almost everything as uninstall the driver to install from the Nvidia site manually, but it may not help.

  When I start to play game screen 30 sec later blacker than blue showin screen upwards and it says "Driver Power State failure" after that reboot my laptop and when BOOM opening! I can't see the icon of the Nvidia graphics driver on my toolbar and Im open Device Manager, then click on graphics cards I have only seen Intel(r) HD Graphics 4000 but no idea about the GTX 670 M.

  I also have the Geforce experience opening but he says "sorry, GeForce experience could not find a driver for this PC. Help, please.

  someone here? help pls

• Unable to start my laptop, error: an unexpected error has occurred. Defective hardware such as a hard drive or the CD-Rom drive which is a failure. Status: 0xc00000e9

  When I tried to boot my Toshiba laptop, I get the message that unexpected error occurred.  Defective hardware such as a hard drive or the CD-Rom drive which is a failure. Status: 0xc00000e9

  \windows\system32\ntkrnlpa.exe file status: 0xc0000098

  Windows failed to load because the kernel is missing or currupt

  My computer did not come with an installation disc.  Best Buy has it

  I need my laptop, can anyone help.

  You download and make the disks to another computer.

  If you continue to have problems to take your machine to a repair shop.

• Wmp54g driver RT2500.sys causes BSOD error: driver_ not_les_than_ friezer less_ or_ equality

  Try to install WMP54G v4.0 on XP SP3.

  I tried all three PCI connectors.

  Remove the Chuck RT2500. SYS system starts.

  Put back and BSOD error: driver_irql_not_less_or_equal

  (Mod Note: published subject to keep stretching threads.) (Thank you!)

  Resloved problem with the Ralink instead of Linksys driver.

• error ORA-4068:-l' current state of the package is invalidated

  Hai friends,
  
  Please see this link
  
  Problem we faced, it is ' error ora-4068:-l' current state of the package is disabled "in the application.initiallly of customer, we migrated to oracle 9i and 10g 10.2.0.4.0
  
  We have discussed and obtained the solution as the timestamp of the objects may be different. (we expect the access rights of the table sys.obj$) pls see the link
  
  Re: oracle error-4068
  
  But now we are informed senior as below
  
  (1) error ora-4068 will come only when recompile us the view. is this true?
  
  (2) 6136074 bug is fixed in 10.2.0.4.0. is it?
  
  Gurus of give your valuable suggestions
  
  S

  Packages tend to fail because of their 'package '. A package has a 'State' when it contains the package variable and constant level etc. and the package is called. On the first calling package, the 'State' is created in memory to hold the values of these variables, etc. If an object including the package depends on for example a table is changed somehow example deleted and recreated due to data dependencies, the package then takes a State not VALID. When you do then appealed to the package, Oracle examines the status and see that it is not valid, then determines that the package has a "State". Because something changed the package depended on, the State is taken as being obsolete and is ignored, which causes the error "State package has been abandoned" message.

  If a package has no variables of level package etc. i.e. the 'State' and then, taking the same example above, the whole takes an INVALID state, but when you make then a call to the package, Oracle considers as invalid, but knows that there is no 'State' attached to it and is therefore able to recompile the package automatically and then continue execution without causing error messages. The only exception here is if the thing that the package was dependent on a change of such kind that the package may not compile, in which case you will get an invalid error package type.

  And if you want to know how we prevent Jetty package States...

  Move all variables and constants in a stand-alone package specification and to refer to those of your original package. So when the status of your original packing is invlidated for some reason, it has no State package and can be recompiled automatically, however the packaging containing the vars/const is not cancelled because it has no dependencies, so the State that is in memory for this package will remain and may continue to be used.

  As for package-level sliders, you will need to make these premises to the procedures/functions using them as you won't be able of sliders reference in all of packages like that (not sure on the use of the REF CURSOR but... exists for me to study!)

  This first example shows the State being disabled by adding a new column on the table and causing to give a 'Package State scrapped' error...

  SQL> set serveroutput on
  SQL>
  SQL> create table dependonme (x number)
    2  / 
  
  Table created.
  
  SQL>
  SQL> insert into dependonme values (5)
    2  / 
  
  1 row created.
  
  SQL>
  SQL> create or replace package mypkg is
    2    procedure myproc;
    3  end mypkg;
    4  / 
  
  Package created.
  
  SQL>
  SQL> create or replace package body mypkg is
    2    v_statevar number := 5; -- this means my package has a state
    3
    4    procedure myproc is
    5      myval number;
    6    begin
    7      select x
    8      into myval
    9      from dependonme;
   10
   11      myval := myval * v_statevar;
   12      DBMS_OUTPUT.PUT_LINE('My Result is: '||myval);
   13    end;
   14  end mypkg;
   15  / 
  
  Package body created.
  
  SQL>
  SQL> exec mypkg.myproc
  My Result is: 25
  
  PL/SQL procedure successfully completed.
  
  SQL>
  SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
    2  / 
  
  OBJECT_NAME
  --------------------------------------------------------------------------------------------------
  OBJECT_TYPE         STATUS
  ------------------- -------
  MYPKG
  PACKAGE             VALID
  
  MYPKG
  PACKAGE BODY        VALID
  
  SQL>
  SQL>
  SQL> alter table dependonme add (y number)
    2  / 
  
  Table altered.
  
  SQL>
  SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
    2  / 
  
  OBJECT_NAME
  --------------------------------------------------------------------------------------------------
  OBJECT_TYPE         STATUS
  ------------------- -------
  MYPKG
  PACKAGE             VALID
  
  MYPKG
  PACKAGE BODY        INVALID
  
  SQL>
  SQL> exec mypkg.myproc
  BEGIN mypkg.myproc; END;
  
  *
  ERROR at line 1:
  ORA-04068: existing state of packages has been discarded
  ORA-04061: existing state of package body "SCOTT.MYPKG" has been invalidated
  ORA-06508: PL/SQL: could not find program unit being called: "SCOTT.MYPKG"
  ORA-06512: at line 1
  
  SQL>
  SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
    2  / 
  
  OBJECT_NAME
  --------------------------------------------------------------------------------------------------
  OBJECT_TYPE         STATUS
  ------------------- -------
  MYPKG
  PACKAGE             VALID
  
  MYPKG
  PACKAGE BODY        INVALID
  
  SQL>
  SQL> exec mypkg.myproc
  
  PL/SQL procedure successfully completed.
  
  SQL>
  SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
    2  / 
  
  OBJECT_NAME
  --------------------------------------------------------------------------------------------------
  OBJECT_TYPE         STATUS
  ------------------- -------
  MYPKG
  PACKAGE             VALID
  
  MYPKG
  PACKAGE BODY        VALID
  

  And the following example shows how to get the package in their own specifications of package variables, allows the package to automatically recompile when it is called even if it has become invalid by the action to add a column to the table.

  SQL> drop table dependonme
    2  / 
  
  Table dropped.
  
  SQL>
  SQL> drop package mypkg
    2  / 
  
  Package dropped.
  
  SQL>
  SQL> set serveroutput on
  SQL>
  SQL> create table dependonme (x number)
    2  / 
  
  Table created.
  
  SQL>
  SQL> insert into dependonme values (5)
    2  / 
  
  1 row created.
  
  SQL>
  SQL> create or replace package mypkg is
    2    procedure myproc;
    3  end mypkg;
    4  / 
  
  Package created.
  
  SQL>
  SQL> create or replace package mypkg_state is
    2    v_statevar number := 5; -- package state in seperate package spec
    3  end mypkg_state;
    4  / 
  
  Package created.
  
  SQL>
  SQL> create or replace package body mypkg is
    2    -- this package has no state area
    3
    4    procedure myproc is
    5      myval number;
    6    begin
    7      select x
    8      into myval
    9      from dependonme;
   10
   11      myval := myval * mypkg_state.v_statevar;  -- note: references the mypkg_state package
   12      DBMS_OUTPUT.PUT_LINE('My Result is: '||myval);
   13    end;
   14  end mypkg;
   15  / 
  
  Package body created.
  
  SQL>
  SQL> exec mypkg.myproc
  My Result is: 25
  
  PL/SQL procedure successfully completed.
  
  SQL>
  SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
    2  / 
  
  OBJECT_NAME
  --------------------------------------------------------------------------------------------------
  OBJECT_TYPE         STATUS
  ------------------- -------
  MYPKG
  PACKAGE             VALID
  
  MYPKG
  PACKAGE BODY        VALID
  
  SQL>
  SQL> alter table dependonme add (y number)
    2  / 
  
  Table altered.
  
  SQL>
  SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
    2  / 
  
  OBJECT_NAME
  --------------------------------------------------------------------------------------------------
  OBJECT_TYPE         STATUS
  ------------------- -------
  MYPKG
  PACKAGE             VALID
  
  MYPKG
  PACKAGE BODY        INVALID
  
  SQL>
  SQL> exec mypkg.myproc
  My Result is: 25
  
  PL/SQL procedure successfully completed.