defining a guest do not light until after the other?

Similar Questions

• Windows does not start until after the second day to have.

  I just got my laptop Toshiba yesterday with Windows 7 above. I used it for about 4 hours, when I'm done I turned it off by saying it close here go to start > stop. Before putting the laptop on I saw the lights on so I pressed the manual to close button, at the last second, I saw he said something as 341 on 356 updates installed, do not turn off the computer. I don't think a lot because I was tired so the next morning, I try to turn on my laptop and it stops after the Windows 7 load loading animation, and all I have is a black screen with a mouse. I tried to run in safe mode, same thing black screen with my ability to see where is my mouse.

  Contact Toshiba support under your warranty. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite Pro L300 will not start until after the update of the BIOS of 1.30 to 1.50

  Dear all,

  I have a Toshiba Satelklite Pro L300 and had no problem for the last 4 years. Last Monday, I replaced my hard drive with a new one and after installing a new copy of Windows XP Pro, I have downloaded all the drivers on the official site. After my last update, I have updated the BIOS to version 1.30 to 1.50. After a few seconds my laptop has rebooted and was not able to load Windows and / or recognize my new hard drive.

  I tried several methods, using safe, optimal Bios default etc but was unsuccessful. IO could not even re - install Windows as the hard drive is not being recognized by the laptop. I've formatted the HD again through my desktop Pc, but still have the same problem.

  I am really worried and would like immediate help!

  Best regards

  Engelbert

  > I formatted the HD again through my desktop Pc, but still have the same problem.
  What happen exactly when you turn on your laptop?

  Set the BIOS as deult and try to install the original recovery image that you got with your laptop. If everything works OK that means upgrading the disk HARD was a success and there is not a serious hardware problem.

  After this check, you can try again to install Windows XP Home edition.
  Please post comments.

• Laptop does not start until after the virus attack

  Last night I was browsing the web when suddenly I got a lot of warnings of viruses Microsoft arise. I immediately disconnected and then ran a full scan of the system of McAfee, but he can't find anything, so I keep the laptop. Now when I try to start it, just at the point where the wallpaper appears (but), I get the following message - "Data Execution Prevention - to help protect your computer, Windows has closed this program - converter of Cookie by Microsoft. The boot process and then stops and goes no further. I then click "close message" (which is the only option), then get a 'Cookie converter has encountered a problem and needs to close... ". "Please tell Microsoft this problem"... window. The laptop remains frozen, regardless if I click 'Send error report' or 'do not send '. My only option then must he put off, which seems to be quite normally, i.e. "Logging Off" followed by "Windows is shutting down".

  I tried booting in safe mode and also "safe mode, last known good configuration", but exactly the same thing happens every time either I can't past the error message above.

  Can anyone suggest what I can try?

  I am running Windows XP SP3 and I am up to date with all Windows updates.

  I agree with Akuma.

  In this case backup your data and use the Toshiba Recovery disk and reinstall Windows. It only takes a few minutes and not so long as trying to correct the problem.
  I think it would be the best solution because the same phenomenon occurs in safe mode and last known good configuration.

• Phone does not start until after the demotion to 4.4.4

  Hello
  I have D5803 running 5.1.1 and I wanted to downgrade to 4.4.4.
  I followed this link:

  http://Forum.xda-developers.com/Z3-c...d5833-t2906706

  and flashed 4.4.4 (23.0.1.A.5.77 - unbranded - USA (1289-7524)) using flashtool.

  Flashing has finished successfully, according to this:

  28/01/2015 15:01:06 - INFO - Flashtool Version 0.9.19.0 built on 29/07/2015 12:00
  28/01/2015 15:01:06 - INFO - execution of search strategies to find the proxy selector
  28/01/2015 15:01:06 - INFO - no proxy not found for IE. Try the next
  28/01/2015 15:01:06 - INFO - strategy firefox could not try a next: installation of Firefox not found
  28/01/2015 15:01:06 - INFO - no proxy not found for java. Try the next
  28/03/2015 15:03:01 - INFO - synchronization of devices on github
  28/03/2015 15:03:01 - INFO - repository cloning devices
  28/03/2015 15:03:18 - NEWS - synchronization of finished devices.
  28/03/2015 15:03:22 - NEWS - device connected with USB debugging off
  28/03/2015 15:03:22 - INFO - line devices of 2011, make sure that you are not in MTP mode
  28/05/2015 15:05:22 - NEWS - selected Bundle for Sony Xperia Z3 Compact (D5803). FW release: 23.0.1.A.5.77. Customization: U.S.
  28/05/2015 15:05:22 - NEWS - preparation of files for flashing
  28/05/2015-15:05:39 - INFO - please connect your device in flashmode.
  28/06/2015 15:06:01 - INFO - disconnected device
  28/06/2015 15:06:37 - INFO - appliance connected with USB debugging off
  28/06/2015 15:06:37 - INFO - line devices of 2011, make sure that you are not in MTP mode
  28/06/2015 15:06:47 - INFO - disconnected device
  28/07/2015 15:07:15 - NEWS - device connected with USB debugging off
  28/07/2015 15:07:15 - INFO - line devices of 2011, make sure that you are not in MTP mode
  28/07/2015 15:07:27 - NEWS - disconnected device
  28/07/2015 15:07:50 - INFO - peripheral connected flash mode
  28/07/2015 15:07:50 - INFO - opener for R/W
  28/07/2015 15:07:50 - INFO - information on the playback device
  28/07/2015 15:07:50 - INFO - ready phone to flashmode operations.
  28/07/2015 15:07:50 - INFO - partition opening TA 2
  28/07/2015 15:07:50 - INFO - current device: D5803 - YT9114XJ39-1289 4696_R5C - 1285 - 6521_23.4.A.0.546 - GLOBAL - LTE_23.4.A.0.546
  28/07/2015 15:07:50 - INFO - partition of YOUR closing
  28/07/2015-15:07:50 - INFO - start flashing
  28/07/2015 15:07:50 - INFO - loader.sin treatment
  28/07/2015 15:07:50 - INFO - verification header
  28/07/2015 15:07:50 - INFO - flashing data
  28/07/2015 15:07:51 - INFO - Loader: S1_Root_9c84 - Version: MSM8974AB_22 / Boot version: S1_Boot_MSM8974AC_LA3.0_L_36 / Bootloader status: ROOTABLE
  28/07/2015-15:07:51 - INFO - the transfer buffer size: 262144
  28/07/2015 15:07:51 - INFO - delivery of start-up analysis
  28/07/2015-15:07:51 - INFO - found a model session. Use: C:\Users\Moshe\.flashTool\devices\D58XX\default.fs c
  28/07/2015 15:07:51 - INFO - partition opening TA 2
  28/07/2015 15:07:51 - INFO - TA unit writes 00002774. Value: [01].
  28/07/2015 15:07:51 - INFO - partition of YOUR closing
  28/07/2015 15:07:51 - INFO - partition processing - image.sin
  28/07/2015 15:07:51 - INFO - verification header
  28/07/2015 15:07:51 - INFO - flashing data
  28/07/2015 15:07:51 - INFO - partition opening TA 2
  28/07/2015 15:07:51 - INFO - partition of YOUR closing
  28/07/2015 15:07:51 - INFO - partition opening TA 2
  28/07/2015-15:07:51 - INFO - write YOUR unit 0000084f. Value: [1A, THIS, 1 d, 00, 01, 00, 04, 05, 00, 02, 02, 08, 00, 10, 03, 00, 02, 04, 02, 05, 00, 01, 03, 02, 00, 10, 05, 00, 03, 03, 05, 00, 10, 0a, 00, 02, 00, A9, 09, BE, BA, A9, 09, 00, 00, 04, 00, 03, 00, 02, 00, 00, 00, 04, 04 B0, 04, 0E] 00, 06. 00, B8 0B 01, 4 B, 00, 00, 00, 03, 96, 00, 2 C, 01, 03, 09, 00, 00, 01.
  28/07/2015-15:07:51 - INFO - write YOUR unit 000008fd. Value: [00]
  28/07/2015 15:07:51 - INFO - partition of YOUR closing
  28/07/2015 15:07:51 - INFO - partition opening TA 2
  28/07/2015 15:07:51 - INFO - dbi_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID12-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin treatment
  28/07/2015 15:07:51 - INFO - verification header
  28/07/2015 15:07:51 - INFO - flashing data
  28/07/2015 15:07:51 - INFO - treatment emmc_appsboot_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLA TFORM-MSM8974AC-LIVE-HWID007B40E1-SWID09-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin
  28/07/2015 15:07:51 - INFO - verification header
  28/07/2015 15:07:51 - INFO - flashing data
  28/07/2015 15:07:51 - INFO - rpm_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID0A-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin treatment
  28/07/2015 15:07:51 - INFO - verification header
  28/07/2015 15:07:51 - INFO - flashing data
  28/07/2015 15:07:52 - INFO - s1sbl_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID65-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin treatment
  28/07/2015 15:07:52 - INFO - verification header
  28/07/2015 15:07:52 - NEWS - flashing data
  28/07/2015 15:07:52 - INFO - sbl1_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID00-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin treatment
  28/07/2015 15:07:52 - INFO - verification header
  28/07/2015 15:07:52 - NEWS - flashing data
  28/07/2015 15:07:52 - INFO - tz_S1_Boot_MSM8974AC_LA3_0_60_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID07-OEM1-AID4-DEBUG00_S1-BOOT-LIVE-9C84-0004-MMC.sin treatment
  28/07/2015 15:07:52 - INFO - verification header
  28/07/2015 15:07:52 - NEWS - flashing data
  28/07/2015 15:07:53 - INFO - partition of YOUR closing
  28/07/2015 15:07:53 - INFO - partition opening TA 2
  28/07/2015 15:07:53 - WARN - cache is excluded from the bundle
  28/07/2015 15:07:53 - WARN - apps_log is excluded from the bundle
  28/07/2015 15:07:53 - INFO - kernel.sin treatment
  28/07/2015 15:07:53 - INFO - verification header
  28/07/2015 15:07:53 - INFO - flashing data
  28/07/2015 15:07:54 - INFOS - fotakernel.sin treatment
  28/07/2015 15:07:54 - INFO - verification header
  28/07/2015 15:07:54 - INFOS - flashing data
  28/07/2015 15:07:56 - INFO - partition of YOUR closing
  28/07/2015 15:07:56 - INFO - partition opening TA 2
  28/07/2015 15:07:56 - WARN - userdata is excluded from the bundle
  28/07/2015 15:07:56 - INFO - system.sin treatment
  28/07/2015 15:07:56 - INFO - verification header
  28/07/2015 15:07:56 - INFO - flashing data
  28/12/2015 15:12:43 - NEWS - treatment amss_fs_1.sin
  28/12/2015 15:12:43 - NEWS - verification header
  28/12/2015 15:12:43 - NEWS - flashing data
  28/12/2015 15:12:43 - NEWS - treatment amss_fs_2.sin
  28/12/2015 15:12:43 - NEWS - verification header
  28/12/2015 15:12:43 - NEWS - flashing data
  28/12/2015 15:12:43 - NEWS - treatment amss_fsg.sin
  28/12/2015 15:12:43 - NEWS - verification header
  28/12/2015 15:12:43 - NEWS - flashing data
  28/12/2015 15:12:44 - INFO - partition of YOUR closing
  28/12/2015 15:12:44 - INFO - partition opening TA 2
  28/12/2015 15:12:44 - WARN - 2212 unit not found in the set
  28/12/2015 15:12:44 - INFO - partition of YOUR closing
  28/12/2015 15:12:44 - INFO - partition opening TA 2
  28/12/2015 15:12:44 - INFO - partition of YOUR closing
  28/12/2015 15:12:44 - INFO - partition opening TA 2
  28/12/2015 15:12:44 - WARN - 2404 unit not found in the set
  28/12/2015 15:12:44 - INFO - partition of YOUR closing
  28/12/2015 15:12:44 - INFO - partition opening TA 2
  28/12/2015 15:12:44 - INFO - partition of YOUR closing
  28/12/2015 15:12:44 - INFO - partition opening TA 2
  28/12/2015 15:12:44 - INFO - treatment elabel-D5803 - row_2014010151307.1_23.0.1.A.5.77.sin
  28/12/2015 15:12:44 - INFO - verification header
  28/12/2015 15:12:44 - INFO - flashing data
  28/12/2015 15:12:46 - INFO - partition of YOUR closing
  28/12/2015 15:12:46 - INFO - partition opening TA 2
  28/12/2015 15:12:46 - INFOS - unit TA written 00002725. Value: [32, 30, 31, 35, 2D, 30, 38, 2D, 32, 38, 20, 31, 35, 3, 31, 32, 3, 34, 36, 00]
  28/12/2015 15:12:46 - INFOS - unit TA written 00002774. Value: [00]
  28/12/2015 15:12:46 - INFO - partition of YOUR closing
  28/12/2015 15:12:46 - NEWS - closing session flash
  28/12/2015 15:12:46 - INFOS - flashing over.
  28/12/2015-15:12:46 - INFO - please unplug and start your phone
  28/12/2015-15:12:46 - INFO - for flashtool, Sources unknowns and debugging must be enabled in phone settings

  Tried to turn on the unit, but he comes to the purple screen, freezes and reboots itself constantly. I can't even turn the phone off.

  What should I do?

  Thanks in advance.

  @ryanjg11

  Re-download flashtool and the file of the ftf > charge the phone for an hour about > press and hold the power & volume 10 seconds > repeat the decommissioning process

  https://talk.sonymobile.com/T5/Xperia-Z2/how-to-manually-update-downgrade-root-2014-Xperias/TD-p/593...

• In the United States, I can use selector locale quick to get U.S. locale of Russia but in Russia, it does not work to go the other way or any other premises than elsewhere. After selecting a new language and restarting firefox, it remains on the Russian

  In the United States, I can use selector locale quick to get us to the locale of Russia (ru - RU), but in Russia, it does not work to go the other way or any other premises than elsewhere. After you have selected the local new and restart firefox, it remains on the Russian locale. Y at - it a fix for this problem?

  This has happened

  Each time Firefox opened

  == Looks like it started with a newer version of firefox, but this may have been coicidental

  You have other language packs languages installed?
  Tools > Modules > languages

  There is no module language en-US, to achieve that you must install the version of Firefox en-US and install other languages in the version.
  http://releases.Mozilla.org/pub/mozilla.org/Firefox/releases/3.6.6/Win32/XPI/

  See also http://kb.mozillazine.org/Language_packs

• PC has not successfully restarted after the installation of updates

  Hello

  I have been updated with Windows Update and asked to restart my PC after the installation is complete, however, my computer froze just at that moment, so I had to press the power button to force it to close. So I don't a not properly restart but forced my PC to stop and I have not a screen saying "Configuring updates" as usual (because there is no restart appropriate but just a forced to close). When I turned on my PC back, I thought that all updates have been lost or screwed up because I don't restart the PC correctly, however, instead, windows said it was "Configuring updates" (from 0% to 30%) and 30%, he said he has been stop and then rebooted my machine and these updates have been 100% configured/installed.

  So my question is, were all 100% installed as said windows updates or was it just a fake reviews? Because I forced my PC to stop rather than restart it when all updates to complete the installation.

  In addition, argues that all updates have been installed successfully in the "Installed updates" menu, too. Please let me know if it of a false notice or not.

  Thank you

  T.

  Since you have not stopped correctly after the installation of updates, updates could not configured correctly

  Follow these steps to see the Windows updates are installed on your computer.

  1. Open Windows update via Control Panel

  2. In the left pane, click view update history.

  Use a system restore to restore your system to a previous state before the installation of the updates

  =================

  1. click 'Start' and type system restore in the search box, and then click "System Restore" in the section programs.

  When you are prompted by the User Account Control feature, click "continue".

  2. do one of the following

  * If there is a recommended restore point, click on choose a different restore point and then click Next.

  * If there no restore points recommended in the list, simply click next to continue.

  3. Select a restore point in which you know that the operating system works and then click on "next".

  5. in confirmation of your restore point page, click on "Finish".

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why is my media player of securities randomly suddenly played on every album & not as shown, one after the other?

  All of a sudden my Windows Media Player (11) started playing the songs on each album random & not one after the other in chronological order, any ideas anyone please?

  Hello

  To better understand the issue, please let me know if you have made recent changes made on the computer before this problem?

  This problem may occur if the Windows Media Player settings are incorrect.

  Method 1:
  Let's first run the fixit and check if it helps.

  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  Method 2:
  If the problem persists, I suggest you organize your digital media collection
  and check if it helps.

  Organize and search your digital media collection
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/library

  Check out the link for more information.

  Create and use your own customized reading lists
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/playlists

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• My plug-ins are defined in CC PS not PS CC2014 and the external editor to the LRCC should be changed to PSCC to use my plug-ins. How can I change the external editor to make CC PS instead of CC2014 PS

  My plug-ins are defined in CC PS not PS CC2014 and the external editor to the LRCC should be changed to PSCC to use my plug-ins. How can I change the external editor to make CC PS instead of CC2014 PS

  Hi Alik!

  Lightroom sets the latest version of Photoshop as external editor by default. However, you can set the CC Photoshop as an additional external editor in the preferences.

  

  You can then call it with a keyboard shortcut or via the menu.

  

• Can the Sandisk Sansa Fuze 4 GB MP3 read podcasts one after the other

  For health reasons, I need to take a long walk after each meal.  For many years during my walks that I listened to podcasts on my wonderful old Sandisk sansa, who plays a podcast after the other without action from me until I have stop.  It's perfect here in the North when I walk in 30 below zero weather. I mean that I don't want to open my parka and out the player to move to the next podcast.  If I had to do, they would find me lying in the snow, Frost, like all the rest of those poor Devils who bought the wrong MP3 player.  Anyway, after years of using the plug-in on my old Sansa fuze is pretty much exhausted and the player must be replaced.  I buy a sansa clip, but had to return when I discovered that he has not played podcasts one after the other, automatically. (And it's also too small for my needs).  Before you buy a new 4 GB sansa fuse, so I need to know if this greatest player will play my podcasts consecutively and one after the other.  Your advice would be much appreciated.

  MrHat wrote:

  I currently use the Sansa e250 2 GB MP3 Fuze player Walkman.

  There is an e250 (2 GB) and a rocket. They are 2 totally different players. The "rocket" (original) replaced the e200 series model.

  But if your podcasts are placed in the Podcast folder (or even record Audio books) and then ranked in the same "Album" folder, they must play consecutively without stopping, regardless of the model of reader.

• In the library panel, pictures of miniatures become black one after the other

  Hello

  Last month, in the library panel, pictures of miniatures become black one after the other, and then they all black!

  I don't know how to recover the thumbnails.

  And in the develop module, the photo is very dark, until I click on your car.

  Thanks for helping me Olivier.

  Version of Lightroom: 6.2.1 [1046594]

  License: Permanent

  Operating system: Windows 10

  Version: 10.0

  Application architecture: x 64

  The system architecture: x 64

  Number of logical CPUs: 4

  Processor speed: 2.9 Ghz

  Built-in memory: 6143,1 MB

  Memory real available pour Lightroom: 6143,1 MB

  Real memory used by Lightroom: 900,6 MB (14.6%)

  Virtual memory used by Lightroom: 1032,1 MB

  Size of the memory cache: 399.2 MB

  Maximum number of links used by Camera Raw: 4

  SIMD optimization of Camera Raw: SSE2

  The system DPI setting: 96 DPI

  Composition on the Desktop enabled: Yes

  Views: 1) 1920 x 1080, 2) 1280 x 1024

  Input types: multipoint touch: no, touch integrated: no, built-in pen: no, touch external: no, External plume: no, keyboard: no

  Parents to the graphic processor information:

  AMD Radeon HD 5800 series

  Check the supported OpenGL: past

  Vendor: ATI Technologies Inc.

  Version: 3.3.13399 context 15.201.1151.0 the base profile

  Renderer: AMD Radeon HD 5800 series

  LanguageVersion: 4.40

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Access to the library path: D:\Photos\_LightRoom\Lightroom\Lightroom Catalog.lrcat

  Settings file: C:\Users\Olivier\AppData\Roaming\Adobe\Lightroom

  Installed modules:

  (1) Facebook

  (2) Flickr

  (3) external module connected mode Canon shooting

  (4) external module connected mode Leica shooting

  (5) external module of shooting in connected mode Nikon

  Markers Config.lua: no

  Adapter n ° 1: supplier: 1002

  Device: 689e

  Subsystem: e177174b

  Revision: 0

  Video memory: 1012

  Adapter n ° 2: provider: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (High Definition Audio device)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: LR5x102

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  HiLolivGr1

  Please refer to this thread images regarding the black squares

  Concerning

  Assani

• Play videos local one after the other

  Hi - I'm going to put in place 10 videos locally in Dreamweaver to play one after the other.  By local authorities, I say everything is on one computer and you just open the page HTML in Chrome and it works.  When the HTML opens in Chrome, I got the first video auto play and loops too.  But after the end of the #1 video, I have need for 2nd video to start, then third, and so on until the 10th is complete, then it goes back to #1 again.

  Is the code that I have on the local HTML page and it works for a video is:

  < video width = "720" height = "406" AutoPlay controls loop >

  < src = "source 1E.mp4" type = "video/mp4" > "

  < object data = "1E.mp4" width = "720" height = "406" > "

  < / object >

  < / video >

  .. .but I just can't figure out how to get the other 9 videos in there, so they play behind #1 loop and then back to #1 again.

  Does anyone have an idea how to do this?  Thank you.

  Video HTML5 can only play a single video.  It does not fit your goals.  That's why I suggested using your laptop Media Player by default since this will be the software that plays files.  If you do not have Windows Media Player to work, try something else like Media Player Classic (it's free, I use it all the time).

  Media Player Classic - Home Cinema Tutorial #3 - How to manage your playlists

  Nancy O.

• IDCS6 MACOSX JS: data merge multiple txt files one after the other

  Hello everyone.

  I have a situation where I have to data merge multiple text files to a single file indesign real "base". Databases formats are the same, the point of difference is a code in the second field of the database that refers to a postal box (not a zip/postal code, a code of 'distribution center' that has possibilities of 56 or greater). I would prefer data merge a file and then somehow split the PDF via Acrobat, but the length of postal areas resulting is incompatible and something that cannot be done if the document "split" feature in acrobat.

  The database starts as one massive file but using a one line code, can be divided into postal areas in separate text files.

  My last question: is it possible data merge several files at the same time (for example one after the other) and to give them their names based on the names of the input text file?

  OLE Kvern had a script to merge the data to a file without the user interface. I changed the last line slightly so that it generates a PDF file based on [high quality]:

  if(app.documents.length != 0){
          var myDocument = app.activeDocument;
          app.dataMergeOptions.removeBlankLines = true;
          //Select a source file.
          var myDataFile = File.openDialog("Select a data file")
          var exported = "file location(redacted for the sake of this post)"
          if(myDataFile != ""){
                  myDocument.dataMergeProperties.selectDataSource(myDataFile,);
                  myDocument.dataMergeProperties.exportFile(exported,"[High Quality Print]",);
          }
  
  }
  

  I guess that the answer has to do with the variable "myDataFile" and rather than just being open a dialog box, it could be somehow by selecting a table of text files, but it is where I am out of my depth.

  Ideas or thoughts which may not involve trying to do both the many mergers, but can somehow revolve around a great fusion of PDF?

  Thank you very much

  Colin

  Since writing my last response, I realized there was a better answer. It is a scenario of Peter Kahrel and a modified version of a script by Olav Kvern. Details can be found here: batch of merge data | Adobe Community

  I have since made other mods to the script is easier to understand:

  if(app.documents.length != 0){
  // make sure to use the document that is open
          var myDoc = app.activeDocument;
  // get the name of the document that is open for future naming purposes
          var myName = myDoc.name
  // get the location of the folder that contains both the indesign files and the text files
          var myLocation = "FULL PATH LOCATION OF FOLDER CONTAINING TEXT FILE AND DESTINATION FOR FINAL PDFS"
  // define the names of the data files to use based upon the names of the indesign files
          var myImport = myLocation + myName + ".txt"
  // define the names of the data merged PDFs to be created
          var myExport = myLocation + myName + ".pdf"
  // the actual engine for the merge, including DM instructions such as remove blank lines, object fitting etc.
          var myDataFile = myImport
          app.dataMergeOptions.removeBlankLines = true;
          if(myDataFile != ""){
                  myDoc.dataMergeProperties.selectDataSource(myDataFile,);
                  myDoc.dataMergeProperties.exportFile(myExport, "[PDF/X-1a:2001]", );
          }
  
  }
  

  If this script will automatically merge a file which is open as LONG as the data file is the same name as the indesign file with .txt at the end for example

  Woodward.indd (indesign file)

  Woodward.indd.txt (used for merging text file)

  This script does still not the original memory and who was using an indesign document, to browse for many text files and merging of PDF based on text files.

  HOWEVER, I am sure that the answer to that is based only on the use of the script above (no need to Peter batch convert script) and changing the line 9 to be a loop for... but again, this is where I come to a grinding halt. Any help would be appreciated.

  Colin

• How to play audio files, one after the other?

  Hi, I try to create an application that tries to read audio files a few one after the other. I've created a loop for playing audio files. But only the first track is played and the second song is playing only about 5 seconds while the rest do not get played at all and the two files that have played, pieces overlap, which is not supposed to be. Can you guys help me? I need urgent assistance that I need to finish it tonight.

  Here are my codes I created for the application:

  package mypackage;
  
  import javax.microedition.media.Manager;
  import javax.microedition.media.MediaException;
  import javax.microedition.media.Player;
  import java.lang.Class;
  import javax.microedition.rms.RecordStore;
  import java.io.InputStream;
  import java.io.ByteArrayInputStream;
  import net.rim.device.api.media.protocol.ByteArrayInputStreamDataSource;
  import net.rim.device.api.system.*;
  import net.rim.device.api.ui.*;
  import net.rim.device.api.ui.component.*;
  import net.rim.device.api.ui.container.MainScreen;
  import net.rim.device.api.ui.extension.container.*;
  import net.rim.device.api.ui.UiApplication;
  import java.io.IOException;
  
  public class PlayMedia extends UiApplication{
      /**
       * Entry point for application
       * @param args Command line arguments (not used)
       */
      public static void main(String[] args){
  
          PlayMedia theApp = new PlayMedia();
          theApp.enterEventDispatcher();
      }
  
      public PlayMedia()
      {
  
          pushScreen(new PlayMediaScreen());
  
      }
      /**
       * A class extending the MainScreen class, which provides default standard
       * behavior for BlackBerry GUI applications.
       */
      final class PlayMediaScreen extends MainScreen
      {
          /**
           * Creates a new PlayMediaScreen object
           */
          public Player p = null;
          PlayMediaScreen()
          {
              String test3 = "Test(2seconds).mp3";
              String test5 = "Test(2seconds)2.mp3";
              //String test6 = "Test(2seconds)3.mp3";
              String test4 = "Test(2seconds)4.mp3";
              String test1 = "blind_willie.mp3";
              String test2 = "blind_willie.mp3";
              String mp3 = null;
  
              for(int i=0;i<5;i++){
                  if(i == 0){
                      mp3 = test1;
                  }
                  else if(i == 1){
                      mp3 = test2;
                  }
                  else if(i == 2){
                      mp3 = test3;
                  }
                  else if(i == 3){
                      mp3 = test4;
                  }
                  else if(i == 4){
                      mp3 = test5;
                  }
                  //testing
                  System.out.println("Song is "+ mp3 + "???????????????????????????????????????");
  
                  play(mp3);
  
                  System.out.println("Song is "+ mp3 + "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!");
              }
          }
  
          private void play(String mp3){
  
          InputStream stream = (InputStream)this.getClass().getResourceAsStream("/" + mp3);
  
              try {
                  //p = Manager.createPlayer(source);
                  p = Manager.createPlayer(stream, "audio/mpeg");
                  p.realize();
                  p.prefetch();
  
                  //testing
                  System.out.println("Creating Players!!!!!!!!!!!!!!!!!!!!!!!!!!!!!");
                  System.out.println("The mp3 is " + mp3 + "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!");
  
              } catch (IOException e) {
                  // TODO Auto-generated catch block
                  e.printStackTrace();
  
                  //testing
                  System.out.println("IO Exeception!!!!!!!!!!!!!!!!1 " + e);
  
                  //testing
                  System.out.println(p);
  
              } catch (MediaException e) {
                  // TODO Auto-generated catch block
                  e.printStackTrace();
  
              //testing
              System.out.println("Media Exeception!!!!!!!!!!!!!!!!1" + e);
  
              //testing
              System.out.println(p);
              }
              /*
               * Best practice is to invoke realize(), then prefetch(), then start().
               * Following this sequence reduces delays in starting media playback.
               *
               * Invoking start() as shown below will cause start() to invoke  prefetch(0),
               * which invokes realize() before media playback is started.
               */
              try {
                  p.start();
              } catch (MediaException e) {
                  // TODO Auto-generated catch block
                  e.printStackTrace();
  
                  //testing
                  System.out.println("Media Exeception for starting!!!!!!!!!!!!!!!!1" + e);
  
                  //testing
                  System.out.println(p);
              }
              /*
              try {
                  p.stop();
              } catch (MediaException e) {
              // TODO Auto-generated catch block
                  e.printStackTrace();
              }
              p.deallocate();
              p.close();
              */
  
          }
      }
  }
  

  Please help me! Thanks in advance!

  What you will do, is add the PlayerListener and / if you have in your loop code would go in the treatment of the END_OF_MEDIA event. Once that noise has stopped you will start the next sound and add the listener of player.

  //Declarations
  PlayerListener pListen;
  String mp3 = "";
  
  ..........
  ..........
  
  pListen = new PlayerListener(){
     public void playerUpdate(Player player, String event, Object eventData) {
        if (event.equals(PlayerListener.END_OF_MEDIA)) {
           if( mp3.equals(test1) ) mp3 = test;
           else if( mp3.equals(test2) ) mp3 = test3;
           else if( mp3.equals(test3) ) mp3 = test4;
           .........
  
           InputStream stream = (InputStream)this.getClass().getResourceAsStream("/" + mp3);
           p = Manager.createPlayer(stream, "audio/mpeg");
           p.realize();
           p.prefetch();
           p.addPlayerListener(pListen);
           p.start();
        }
     }
  }
  
  InputStream stream = (InputStream)this.getClass().getResourceAsStream("/" + mp3);
  p = Manager.createPlayer(stream, "audio/mpeg");
  p.realize();
  p.prefetch();
  p.addPlayerListener(pListen);
  p.start();
  

  So, add the try-catch blocks.

• for each page, I'm going to (including this one) something keeps vomit "Secure connection failed" notice, like 50, one after the other - how to make them stop?

  When I open a web page, and sometimes between the two, something launches a 'warning' that the "secure connection failed". I've added nothing to Firefox, but I stopped most of the security plug-ins or extension nothing helps. It wouldn't be too bad if it happened a page once or twice but I'm talking 10,15,20 one after the other.

  Try this solution:

  https://support.Mozilla.com/en-us/KB/troubleshooting%20extensions%20and%20themes