Definite integral of matrix (50g)

Similar Questions

• Integration with 50G

  Hello!

  Well, when I tried to compute the definite integral of | Sin x | I received the message cannot find the signin [0, 2 ft].

  

  I went in RPN mode, and this error persists. I then used [RS] [ENTER] to get the numeric result, and after awhile, I got the correct answer 4. But I can't get the answer simplely by clicking [EVAL].

  I also tried to calculate the antiderivative, and the correct answer returned Calculator -cos (x) * sign (sin (x)). I was wondering why the calculator produces an error when they apply for an accurate result (not digital, without .).

  Jack

  confirming the latest set of equations:

  

  EVAL would be = - 1

  and -> limit X PI - 0 = 1

  and the limit X-> PI = cannot determine.

  So, there's a singularity...

  Unfortunately, because of the resolution of the screen of 50 G, when the resulting equation for the indefinite integral is drawn, clear breaks in the plot IP and 2 * PI are not 100% clear.

  However, the subsequent calculations confirm that they exist.

  This is what has been shown that when the original integral from 0 to 2PI of | Sin (x) | is calculated,

  It is clear that the 50G automatically sets ON RIGOUREUX, even if it is not enabled in the (likely due to the function absolute value in the equation) indicators.

  THE rigorous is perfectly reasonably expect when the EXACT mode is selected with a function of absolute value.

  now for a pencil and paper method:

  | Sin (x) | is sin(x) from 0 to PI

  | Sin (x) | is - sin (x) IP to 2PI

  so...

  integral from 0 to 2PI of | Sin (x) | can also be expressed in

  integral from 0 to PI of Sin (x)

  +

  integral of the AP to 2PI of-sin (x)

  

  in EXACT MODE (strict mode setting is more questions)

  When EVAL would be = 4.

  I can refer you to a message done previously by Bernard Parisse (one of the developers of CASE).   Bernard said that the CASE cannot intercept all EXACT integration singularities (but it report some).

  Regarding the digital approximation method (help-> NUM) to get the result... I can't offer no answer as to the reason that the singularity is resolved.

  I've never seen a single post indicating what type of digital approximation algorithms are used for approximate integration with the 50G.  Of course, the digital approximation algorithms are distinguished by exact calculations.

  Finally, FYI, here is another good example of the use of 50G with an integral and having to use a bit of paper and pencil methodology (in this case, the method of cauchy principal value) to solve the 50G of the singularity.

  /T5/calculators/50g-numerical-integration-with-singularities/m-p/5678169#M11440

• HP preferred integration bug?

  Integration attempt in trying to get the volume of a torus of revoling circle around the axis y.

  Central circle of distance from the origin R and radius r using slices. Standard simple calc problem often given to students. Works well on HP50 and TI-89. Tried on first, last firmware using the template quite definite integral printing.

  Integrate r - r-R + r.

  Using equation 4 * pi * x * sqrt (r ^ 2-(x - R) ^ 2) dx

  You should get 2 * pi ^ 2 * r ^ 2 * R.

  First lets you: "impossible to verify if the antiderivative gibberish characters (rA ^ 2 x 3A gibberish talor has singular points for final integration in [-r, r]).

  Thanks for coming back.

  I just tested with several versions back, and each of them works fine. Make sure that R is not used (because it is an approximate numeric value).

  ∫ (4 * π * x * √ (R²-(x - R2) ²), x, R2 - r, R2 + r)-> 4 * π * r² * r2 * asin ((r/ABS (r)))

  assume(R2>0), assume(r>0)-> [r r2]

  ∫ (4 * π * x * √ (R²-(x - R2) ²), x, R2 - r, R2 + r)-> 2 * π2 * r² * r2

  I think the problem that I saw before was that I had swapped order of r2/r giving r - r2 and r2 + r instead. I think you've done the same too - take a look at your line of "4 * pi * x * sqrt (y ^ 2-(x - r) ^ 2), dx, r - y, r + y;   It works very well if you put r - y and y + r.

• How to solve an equation that has integration

  Dear Sir.

  I need to implement an equation like below:

  

  I have checked several VI mathematics and box tools treatment but unable to fulfil my obligation of signals. Kindly help me with suggestions.

  with respect,

  Sri

  This isn't really a question of LabVIEW, but a simple calculation a.

  The integral show you is a definite integral between values: 0 and 'b '. I guess that the 'a' is a constant value, so just integrate it by the variable 'b', simply by using the rule of the definite integral:

  -2 * a * (b - 0) = - 2ab.

  So if you have the value of a and b, you can use just to function multiply in LabVIEW.

• HP Pavilion 1070 has 23

  Hello

  I am looking to buy a desktop computer for my daughter who is 8 years (educational games, Sims3, Minecraft, Moshi Monsters, browsing the internet) that I also intend to use for the Office remote access of my email and Facebook.

  A couple of shops selling the HP Pavilion 23 1070a model, but I'm going to be very difficult to find online reviews about it.

  I also have difficulty in getting a clear idea of the card - the store that sells the computer said there:

  I7 clocked at 2.8 GHz speed

  8 GB RAM

  2 TB hard drive

  2 GB graphics card

  Wireless network card

  6 USB ports

  Good nvidia graphics card - the guy in the store said this is dedicated but online specs say also that it fits also very confusing...

  Big screen

  Wireless keyboard and mouse

  But the specs little I could find online says it has much lower than that for example. processor i3, 4 GB of RAM, integrated graphics

  I hope that the wireless network card means that we can use internet wireless via a wireless modem / router, and it is built in the wireless card in the computer so that I do not need to get an adapter.

  And there is no mention on the HDMI connections in case we want to join the computer to the TV?

  I would really appreciate if someone can give me some advice on the question of whether this computer is suitable for our needs, and where can I source a few comments about it?

  Also, I am a complete novice when it comes to computers simple English explanations would be really appreciated!

  Thanks in advance!

  Here are the specifications for the all-in - One HP ENVY 23-1070a computer office.;

  58,42 cm (23 inches) high definition LCD display

  Intel Core i7 3770 s < 3.1 GHz (up to 3.9 GHz turbo) >

  8 GB RAM

  NVIDIA GeForce GT 540 M graphics

  Audio high definition integrated

  802.11 g/n PCI Express Mini card wireless

  Gigabit 10/100/1000-Base-T Ethernet

  Hauppauge TV tuner hybrid mini-map

  2 TB hard drive

  Loading SuperMulti Blu - ray burner slot

  6-in-1 multimedia card reader

  Wireless keyboard with volume control and key beats

  Wireless Optical mouse

  Remote control HP

  Webcam

  180W external power supply

  This computer has a wireless network adapter you can connect to a wireless modem/router. Graphics are discreet... that is, if it has a graphics card. The map is a basic entry level card that will do everything what it but play top games middle of range. As it comes to a screen touch "all-in-one", there is no available video output port. To connect to this computer to an external display will require the purchase and use of a USB-to-video adapter as eVGA UV more + UV39.

  This computer should be more than capable for the use of your daughter and your needs, including remote desktop access.

  Please send Bravo

• I can't install Windows XP on Satellite A205-s5831

  Hello
  I bought a new Satellite A205-s5831 laptop.
  I want to downgrade Vista to XP but I can't.
  I've been on it for 7 to 8 hours, but I couldn't do anything.

  The thing is, I can't find RAID drivers for my laptop. So I can copy it to my USB floppy.
  I downloaded the 32-bit Intel Matrix Storage Manager floppy Configuration utility for my GL960 chipset.
  I copied the files on my floppy drive, but even that did not help.

  Then, someone at - it an idea?

  THX

  The key is definitely the Intel Matrix Storage Manager.
  And you don t have no need driver RAID but SATA drivers!
  The SATA drivers are part of the Intel Matrix Storage nursery and they will work for sure!

  I noticed that sometimes drivers diskette advantage 3rd don t work as it should, and that's why you should try to create a new XP CD using the freeware tool called nLite.

  The nLite can help you to integrate the SATA driver into Windows XP and to create a new XP CD.

  PS: SP2 is important and must be also installed on the XP CD

• Restore the cluster of PDM

  I was able to successfully save my table of cluster data to a file of PDM using the following block diagram:

  

  I tried to rebuild my data using the following block diagram:

  

  When the program comes to the nested FOR loop, it will never come. I put a probe on the data to enter into this loop and there is certainly a great picture goes in. Does anyone have ideas for me? Also, should I try a different method to save and restore data? (It seems that TDMS is not very friendly, unless give you him waveform data)

  Thanks for any help!

  Hi Nick,

  The number of iterations of the loop is determined by the smaller table - in this case I would hazard a guess that your definition of cluster matrix (DataArrays.PeakDataArray) is empty - the auto-index entry will see zero element and pass the loop.

  You'll want to index this table of a loop to provide the definition of cluster.

  * edit *: by "a loop out", I mean that you need to use a table of index function, preferably outside the loop for external - you want auto-index just to get the definition of cluster.

  Kind regards

• Selective table average

  Hello

  I have a 2D chart. The following code generates a random array of 3 x 3.

  I want to get the mean (or average) only values greater than a set value (user-defined) in the table.

  Could someone help me.

  I tried to use a "superior to", type the case statement, but when I do this, for less than the value set elements a zero is placed in a new table. This changes the average because it includes the zero element.

  Almost, I need to create a table 1 d of the righteous elements above the value of the definition of the matrix 3 x 3.

  I want to adapt what I learn here much larger bays of 400 x 400 and upwards.

  Any help would be appreciated.

  Thank you

  K

  Attached to the LV 8.6. Please note that I have not downconvert another example since it is my humble opinion, nothing is done for you.

  Norbert

• computer upgrade help!

  Hi, I turned on my computer crashed the other day after I thought the motherboard and for some reason any it started working. I wanted to update that it is a play on this computer and I need to know if the things to put in it, I chose will be form and or work.

  HP Pavilion Media Center a1540n desktop

  These are the specs

  Material
  Base processor
  Athlon 64 X 2 (W) 4200 + 2.0 GHz
  2000 MT/s (mega transfers/second)
  Socket AM2
  Chipset
  GeForce 6150 THE
  Motherboard
  Manufacturer: Asus
  Name of the motherboard: A8M2N - LA
  HP/Compaq motherboard name: NodusM-GL8E

  Video Graphics
  Integrated graphics card
  Sound/Audio
  Audio high definition integrated
  Chipset Realtek ALC 883 or ALC 888
  Supports up to 8 audio channels
  Dolby Pro Logic II compatible
  Network (LAN)
  Integrated 10/100 Base-T network interface

  and I wanted to buy a graphics of amd radeon hd 6870 and amd phenom ii x 6 1100t processor.

  I also know that I may need to buy a fan or something. any help is appreciated. If these do not match my commputer someone has suggestions on what to add? I want to be able to play games like swtor, diablo 3, wow, League of legends, etc. on the spot. Thank you!

  Regardless of any changes to the processor chip, you need a new power supply to power the two 550Ti (minimum 400 w 24A) or 570 (minimum 550W 38A). This is why I suggested the Rosewill 630W continuous with 50A on the 12V line.

  The effectiveness of power curve is the best 20% to 80% of charge.

• Creating and adding an annotation to a tour page

  Hello

  I write a plugin that will add a FreeText annotation normal to a page, near the top right corner of an existing link annotation to indicate the destination of this annotation to link page. My existing code works fine in most situations: I create a PDAnnot using PDPageCreateAnnot(), passing its bounding box, set its content by using the keys PDTextAnnotSetContents, RC CosDict, DS and DA, then add it using the PDPageAddAnnot() function. The situations that I have a problem with is when the page is turned (pages are usually scanned in and then turned as required), similar to the problem that is described in this discussion: http://forums.adobe.com/thread/851038, namely that the annotation is also shot, such that it is created in user-space coordinates. I set the pdAnnotNoRotate flag and it seems to work properly (apart from the location is still the user coords), until my desire of users to move or resize the annotation, as the bounding box with the sizing handles displayed always shot with the page and the only clickable part is at the junction with this box and the annotation. It may be a bug in Acrobat. Suffice it to say, pdAnnotNoRotate don't help me much.

  To remedy this, I have now to transform the bounding box to hold account of the page rotation using a combination of PDPageGetDefaultMatrix(), ASFixedMatrixInvert() and ASFixedMatrixTransformRect(). This concludes the correct bounding box, except that now I don't know how to rotate the contents of the annotation in the same way. I can't find the key turn mentioned in the thread linked to above, and the definition of the matrix on the appearance stream requires that the annotation has made an entry in the key to the AP, which is not after the creation from scratch. Create my own flow of appearance seems like a terribly difficult task when I really want to use the appearance by default anyway, just turned.

  My questions are: can someone tell me which section of the PDF reference covers the aforementioned key of 'Rotation '? If not, can I get a flow of appearance by default to add annotation and running? The key to the AP seems to have filled after that my job has run, because if I browse the PDF structure using preflight, new annotation indeed doesn't have a flow of appearance in the key to the AP, but this isn't immediately after creating or adding to a page.

  Perhaps there is another method to add an annotation properly rotated to the page?

  Thank you, Andrew

  I had the time to look at this issue again today and fixed the problem by setting the dictionary entry turn on the annotation to the same value as the rotation of the Page; the framework encompassing was calculated using the matrix by such default as mentioned in my original post. This demonstrated the annotation with the appropriate rotation. The key turn mentioned here does not seem to be documented (at least not in section 12.5.2 reference PDF - Annotation dictionaries), but I guess it's quite safe to use because it's the method that acrobat uses to place a FreeText Annotaion rotated correctly on a tour page.

  I am sure also that the NoRotate flag bit has not been set because of the problems mentioned above. It is not too much trouble to recreate annotations If the page is turned.

• Integration of the matrix

  I have an X matrix and a vector b:

  X = 1/4 * exp(x/2) [x 3 + 4, 3 x,-3, 4-3 x] b = (x, exp (x))

  now I should calc: X * int (Inv(x) * b)

  Inv (X) * b fine.

  Application INTVX on a simple matrix also works. But if I apply on the resulting vector (inv (X) * b)

  -((3x^2-4X) exp (x) + 3 x)) / (4exp (x) exp(x/2))

  (3 x ^ 2 exp (x) + 3 x + 4) / (4exp (x) exp(x/2))

  my 50g puts INT before the two elements and adds a few t

  How can I get the solution that suits (travel 200) be something like:

  ((3(x+8) exp (x) + 1) exp (x)) / 3

  -(3(x+4) exp (x) + 1) exp (x)

  Are you sure your original formula?

  [["3 * X + 4', ' 3 * X'"], ["-3 * X', 4-3 * X'"]]
  X 2 / EXP 4 / * INV
  
  ['X' "EXP (X)"] *.
  
  SIMPLIFY

  Returns a partial result (inv (X) * b)) who seems different (?)  than the one that you give

  ['((3 * X * EXP(-X/2) ^ 3 +(3*X^2-4*X) * EXP(-X/2)) / 4)']

  "((X + 3 * 4) * EXP (X/2) ^ 3 + 3 * X ^ 2 * EXP (X/2)) [/ 4']."

  INTVX then gives

  [' ((X + 3 * 2) * EXP (X/2) ^ 3 + (9 * X ^ 2 + X + 24 * 48) * EXP (X/2)) / 6']

  ['-(((X+2) * EXP(-X/2) ^ 3 +(3*X^2+12*X+24) * EXP(-X/2)) / 2)']

• HP Pavilion g7-2251dx: Windows 10 IDT high definition Audio Driver Bug report.

  OK after upgrading Windows 8.1 for Windows 10 Home (The Free Upgrade) I have noise problems.

  IDT Sound Drivers (IDT High Definition Audio Codec):

  Speakers integrated into the laptop: they its OK but not as they did in point 8.1 of Windows.

  I've tested on the following:

  Music (sounded OK)
  Played a Youtube video (sounded OK)
  Played a video that I recorded on my PC (its OK)
  Played a show or a movie on Netflix (sounded OK)

  The portable built-in Microphone seems to be working well.
  
  Turtle Beach headset Z11: they sound like basically no Bass Mono instead of stereo there and The Sound is low even though the volume to 100.

  I've tested on the following:
  Play music (sounded bad)
  Played a Youtube video (sounded bad)
  Played a video that I saved on my PC (sounded bad)
  Played a show or a movie on Netflix (bad sound)
  
  In Windows 8.1 speakers embedded in the laptop and the Turtle Beach headset Z11 resembled stereo and strong (perfect).
  
  The helmet Microphone seems to be working very well.
  
  I plugged my headphones Z11 of Turtle Beach to HP from my sister who still has windows 8.1 and my Turtle Beach Z11 helmet sounded very good.

  I plugged my Z11 of Turtle Beach headset in my other sisters that has Windows 10 HP (she has upgraded to Windows 7) and my Z11 of Turtle Beach headset resembled Mono Stereo Instead of.

  It is also plugged into his ear and they looked like Mono Stereo Instead of.
  
  I tested another helmet my Turtle Beach Headset (This Headset plugs into the USB Port) P11 The Sound is perfect it sounds like stereo and not like Mono.

  However when I spoke into the microphone, I could hear my voice coming through the headset speakers (mainly the hearing talk me)
  -------------------------------------------------------------------------------------------
  Microsoft high definition Audio drivers:

  These major works of Drivers so if you just want to use these drivers:

  Uninstall driver IDT
  Restart your computer
  Next adjustment of Volume and other settings
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on properties
  Now just go through each tab and change what you want to change.

  I only click on the Advanced tab, and then change the default Format for 16-bit platforms, 48000 Hz (DVD quality)
  Because that was what the default Format on Windows 8.1
  I also click on record and change the setting of the microphone 2 listed.

  Speakers integrated into the laptop: they its OK but not as they did in Windows 8.1

  I've tested on the following:
  Music (sounded OK)
  Played a Youtube video (sounded OK)
  Played a video that I recorded on my PC (its OK)
  Played a show or a movie on Netflix (sounded OK)

  The portable built-in Microphone seems to be working well.

  Z11 headphones Turtle Beach:

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  The helmet Microphone seems to be working very well.

  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on disable
  Right click on the second peripheral speakers (or according to your to are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono.

  --------------------------------------------------------------------------------------------
  I tried the sound of setting here is what I tried:

  I uninstalled IDT audio driver I went into Control Panel and uninstalled the IDT Audio driver.

  Then I restarted my computer and I reinstalled the drivers of HP's Windows 8.1.

  After restarting my computer again, I checked to see if everything was back to normal, but it is not yet sounded even.
  
  When I right click on the "speaker" icon and then choose playback devices here is what was posted:
  The top unit is called:
  Its digital display (AMD high definition Audio Device) not connected
  OK, this is Normal.
  
  The central device is called:
  Speaker / device by default HP (IDT High Definition Audio Codec)
  OK, this device is also Normal.
  
  The background feature is called:
  Communication by default communication device Headphones (IDT High Definition Audio Codec)
  OK in Windows 8.1 this device has been disabled by default but in Windows 10 it is activated and listed as default communications device.

  So I thought that if I just disabled it my Turtle Beach P11 helmet would return to normal, but it didn't she sounded still, I even restarted my computer.
  
  OK, so I tried to set the Communications headset as device by default but when I right click and click on set as default device it wouldn't let me.
  
  I then disabled speaker / HP and tried to set it as default device it wouldn't let me.
  
  When I disabled speaker / HP Groove Music said he could not detect an Audio device in order to activate the speaker / HP and people with disabilities
  Helmet of communication.
  ---------------------------------------------------------------------------------------
  My computer is a HP Pavilion 2251dx g7

  Audio ID:

  Computer built-in Laptop speakers:
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C184B & REV_1001
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C184B
  
  Turtle Beach z11 headphone 3.5 mm Jack:
  Sorry no Audio for this one hardware ID that he doesn't use the same above, I think.
  
  P11 headphones from Turtle Beach USB:
  USB\VID_10F5 & PID_0231 & REV_0100 & MI_00
  USB\VID_10F5 & PID_0231 & MI_00
  
  If you need more info let me know.

  Thanks for reading all of this I hope that soon, there is a Solution.
  ------------------------------------------------------------------------------------------
  A temporary Solution:

  After you have solved the problem by reading through countless messages try every difficulty that none of them I went into Control Panel and he took a glance at the the Dolby Advanced Audio Control Panel now I never tested with this before so far but I was able to fix the Audio questions here is exactly what I did :

  When you use your built-in Laptop speakers or possibly other speakers:
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click Dolby Advanced Audio
  Click on listening experience
  Check Dolby Advanced Audio

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  When you use your headset from Turtle Beach Z11 or possibly other headphones:
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click Dolby Advanced Audio
  Click on listening experience
  Uncheck Dolby Advanced Audio now, your headset should ring loud instead of sound like Mono and stereo and crappy.

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  You need to keep the box checked when you use your built-in Laptop speakers, otherwise they will sound like Mono and crappy.
  
  So basically when you plug in your headphones uncheck the box.
  
  So basically when you disconnect your headset check box.
  
  If you have messed with the implementation in and want to return to the default value:
  Click Advanced settings
  Click on Reset

  IDT Sound Drivers (IDT High Definition Audio Codec):
  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the speakers of intermediate device / HP (or according to the your are called)
  Click on disable
  Right click on the speakers of intermediate device / HP (or according to the your are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono.

  Microsoft high definition Audio drivers:
  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on disable
  Right click on the second peripheral speakers (or according to your to are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono
  ----------------------------------------------------------------------------------------
  I'm testing all my games to ensure that the work of games and the sound works.

  I use my temporary Solution to test all the games.

  After resetting my PC the sound worked fine with my temporary Solution.

  Castlevania: Lord of Shadow Ultimate Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Castlevania: Lord of Shadow 2:

  The sound was great on my Turtle Beach Z11 helmet.

  Darksiders Pack franchise:
  Darksiders II:

  The sound was great on my Turtle Beach Z11 helmet.

  Darksiders:

  The sound was great on my Turtle Beach Z11 helmet.

  Deus Ex Human Revolution - Director s Cut:

  Download still can not test it yet.

  The Elder Scrolls IV: Oblivion Game of the Year Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  The Elder Scrolls V: Skyrim legendary Edition:

  The sound was great, but even with my temporary fix the sound on my headset Turtle Beach Z11 was low I actually had to put the Volume slider almost up just to hear everything correctly.

  Fallout New Vegas Ultimate Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Grand Theft Auto IV: Complete Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Metal Gear Rising statement:

  The sound was great on my Turtle Beach Z11 helmet.

  Soul Murder Suspect:

  The sound was great on my Turtle Beach Z11 helmet.

  Quantum Conundrum:

  The sound was great on my Turtle Beach Z11 helmet.

  Saints Row Franchise ultimate Pack:
  Saints Row 2: download still can not test it yet.

  Saints Row third: download still can not test it yet.

  Saints Row IV:

  The sound was great on my Turtle Beach Z11 helmet.

  Sleeping Dogs final edition:

  Download still can not test it yet

  Thief: Master thief Edition:

  The sound was great on my Turtle Beach Z11 helmet.
  ------------------------------------------------------------------------------------------
  I could not Downgrade from Windows 8.1 because it said that files deleted even if windows.old was still there, so I just did a Reset instead.

  Thanks to my temporary fix Audio problems are gone, but I hope that HP releases new drivers, so I can't use my temporary Solution.

  Also I hope HP or Microsoft releases new drivers for the Synaptics TouchPad so that people can save their settings.

  This has been corrected by James Yerkes on Microsoft Community:

  Open regedit.exe

  Navigate to:
  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Note it's the LOCAL MACHINE, not the CURRENT USER.

  Search for a key in the installation folder called DeleteUserSettingsOnUpgrade

  Double click and change the value to 0

  Now go back in the Panel of Synaptics, put all how you like and restart.

  in any case if someone has problems with Windows 10 Post here and I'll see if I can help you but I recommend resetting your PC in recovery Menu so that most of the problems will be solved then I would install all my drivers from the manufacturer.

  I am currently using window 8.1 1 driver from AMD and HP drivers.
  -------------------------------------------------------------------------------------------------
  This may not work for everyone, but if you have the same laptop and headphones I don't then it should work.

  I posted this as well on Microsoft Community:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-other_settings/Windows-10-IDT-high-defin...

  ---------------------------------------------------------------------------------------------------

  Hey everyone here is an update.

  Since microsoft rolled out updates for windows 10 mainly the updated driver to update I had is no longer using the old methods such as the use of the old HP drivers to this windows 10 drivers working for my laptop then everything works fine.

  I always use drivers from AMD for My APU (CPU and graphics card), but everything else is Microsoft I using Microsoft drivers for the month now and have had no problem.

  I hope that everyone knows success with these drivers.

• Integration and Radian mode Question on HP 50 g calculator

  It seems every time I change radian to degrees and OK mode mode, it will be always a few minutes later. I don't know if I accidentally activated a flag to cause it to happen or not, but how can I keep the calculator in degree mode always?

  I have a question about integration on the HP 50 g as well. Here is a picture of what I seek to accomplish on the HP 50g: http://i.imgur.com/qTt9kHp.png

  I'll tie it also via this post.

  My problem is this: I need to take the integral on x while having a 'B' variable in the integral so. I want my final answer to appear as 1 333 + 0.333 B as does in the attached picture and the link above. But every time I entered the variables and constants and take the integral, I get the following error message:

  Error: Name not set

  What exactly what I need to change in order to calculate the integral?

  Hi VitaX,

  You want to integrate it in exact mode to get the desired response.  To switch between exact and about modes, hit shift to the right (hold) and enter.  The equal sign upward into the annunciator area of the screen indicates the exact mode.  Punching in your problem, I had (B + 4000) / 3, which is the exact shape of 1 333 +. 333 B.

  The calculator SHOULD go to radian mode to run most of there CASES of advanced features (included integration of the exact mode)... There is no way around that.

  Best regards, Hal

• 50g - unable to resolve a simple system of equations

  It's very easy to do on my Casio FX115-ES, but I can't understand how do on the 50 g for the life of me. I am trying to solve a simple system of equations, illustrated below, for a static engineering courses.

  (F1) sin (30) + (F2) sin (30) - 6 * cos (20) = 0

  (F2) cos (30) - (F1) cos (30) - 6 * sin (20) = 0

  I know it's a simple problem and I can do it by hand, but we'll soon be solve systems with 3 + unknowns. I love the RPN, so I need to be able to quickly resolve these systems on the 50g. I have read the books and searched the Internet for 30 minutes and I swear that nothing I do works. I can't add the words sin() and cos() in a matrix. Solve the paintings, num, s address, m solve... None of this works! I know it's user error, but I have no idea where to start.

  Thanks for any help you can provide!

  Bill

  The unusual notation is shake me up.  Are variables F1 and F2?  If so, we will replace by X and Y and rewrite your system in the standard format:

  Sin (30) * X + sin (30) * Y = 6 * cos (20)

  -cos (30) * X + cos (30) * Y = 6 * sin (20)

  There are many ways to solve this system on the 50g.  How I find simpler (less keystrokes) is by dividing the constant vector by the matrix of coefficients.  There are several ways to do it too, but it's my favorite.

  First of all, make sure your 50g is in approximate mode: while holding down the button to the right, press repeatedly until you see the "~" annunciator instead of "is", then release the button to the right.

  It goes without saying, you must also be in degree mode, so if the first anunciator said RAD, run DEG to change to DEG.

  Now, press the MTRW (['] left shift) to start the MatrixWriter application.

  First enter the vector of constants:

  20 COS 6 * ENTER

  20 SIN 6 * ENTER ENTER - > see [5.638... point 2.052...] on the stack.

  Now enter the matrix of coefficients:

  ENTER 30 FISHING

  ENTER 30 FISHING

  down-cursor left, cursor left, cursor

  ENTER 30 COS [+/-]

  30 COS SIMULTANEOUSLY on KEYS-> see the matrix of coefficients in the stack.

  Divide then: /--> see [4.45... 6.82...], which is [X, Y], the answer.

  If you want exact solutions (and not just the decimal approximation), do all the foregoing in exact mode (sign '=').   Don't forget to put each algebraic expression in single quotes marks.  You can use the MatrixWriter, or you can just type it directly into the battery like this:

  ['6 * COS (20)' '6 * SIN (20)'] Come in

  [["SIN (30)" "SIN (30)', ' - COS (30)" "COS (30)"]]

  /-> of simplified solutions

  A way to simplify these is:

  OBJ→ DROP EVAL (see Y on the stack)

  SWAP EVAL (see X on the stack)

  Exact solutions are 6 * cos (20) ± 2⎷3 * sin (20).

  There are many other methods to solve systems on the 50 g, each with its own entrance of syntax.  Don't forget to single quote each algebraic expression whenever you are in RPN mode.

  Hope that helps!

  -Joe-

• dosent HP 50g calculator works properly

  Hello! I am a user of the calculator hp 50g graphic and I noticed that it is not working properly... What I mean is that it multiplies bacic matrices write the message 'invalid dimension', which tries to find the det (A) = 0 matrix 6 * 6 with the variable x in its diagonal elements, he finds a degree 16 polynomial instead of a degree 6 polynomial! I am completely disappointed! What should I do?

  Thank you very much!!!
  You Allied fill solved all my problems!