Definition of _height and _width prevents movement of the keyframe?

Similar Questions

• I had a hard drive crash and had to move all the data again. Now, I get an error saying that my Visa is not an authorized version. How can I find the product key to reactivate?

  Vista Product Code question

  I had a hard drive crash and had to move all the data again.  Now, I get an error saying that my Visa is not an authorized version.  How can I find the product key to reactivate?  I don't have the sticker on the back and the software I have does not have the code?  I bought this laptop DELL at Best Buy a little more than a year.

  Thank you.

  Hello

  This problem may occur if you make a significant hardware change. See the link provided below.

  Error message when you start Windows Vista: "your activation period has expired".

  http://support.Microsoft.com/kb/925616

  If the OS came preinstalled Dell you may need to contact Dell technical support for assistance.
  http://support.Dell.com/support/topics/global.aspx/support/win7_support/win7_portal?c=us&CS=04&l=en&s=BSD

• I can't use the tab key to move to the next field or use the shift and tab to move to the previous field in the forms.

  After update to 7.0.1 I can't always use the tab key to move to the next field or use the shift and tab key to move to the previous field in forms. He has always worked in previous versions and it is essential for my type of work. Does anyone know of a setting to enable this? If this is not the case, can the developers of Firefox is working on this issue (please). I love Firefox but desperately need this feature to work properly. Thank you!

  No - because it works in Mode safe mode, this means an extension is probably to blame. See http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes

• put up-to-date now have no Favorites and page only moves using the mouse

  after update my pages would not move unless you have moved the mouse so will your help page it advived to reset after it not only did - he did not solve my problem, now it has erased my favorites, some of which are for my wedding

  Then, to recover your bookmarks, you can restore a backup file in this folder of old data of Firefox on your desktop. This article describes how to use the restore function:

  Restore backup bookmarks or move them to another computer

  Assuming that Firefox is not your backups in bookmark automatically, at the bottom of the drop-down list where it says choose a file, choose which to click until the desktop computer and load your last bookmark backup file (it will be in the bookmarkbackups folder).

  A little luck?

• InDesign objects are not locked and will not move with the mouse click.

  I rebooted, uninstalled and reinstalled. Objects interact with when the mouse is clicked. The contours of the block came and the object can be selected and changed, however it will not move with a mouse. Objects respond to the arrows when the issue is raised; but it's heavy at best.

  I gave in my computer image. What was the origin of the problem, is now gone. Thanks for your help.

• I have creative cloud and want to move into the cloud photography for $10 per month

  I need Dreamweaver and thus everything that I use now is Photoshop and Lightroom. I would like to move in terms of photography for $9.99 a month, but I can't find any way to convert it into my account domain. When I get to the section that says change subscription all what they offer is that I have subscription I have. So, how can I change my subscription and what are the steps?

  Thank you.

  Cancel what you have and buy new

  Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  Special plan of photography (including the bridge)

  http://helpx.Adobe.com/Photoshop/KB/differences-Photoshop-creative-cloud-photography.html

• Duplicate an object and create it move on the stage

  Hello

  I'm having a problem in actionscript 3.0 game development. The game plan is to have planes flying across the screen and the player must shoot by clicking on it. As the player gets more points, it must be of planes flying across the screen. No matter what I try, I can't work. Can anyone offer any coding suggestoins for coding in general and him duplicate the object and spawning it out side of the scene.

  Create the plan as a library item and assign a class name (for example you name Plane).  To create a new instance of it you just use...

  var another_plane:PLane = new Plane();

  addChild (another_plane);

  planes.push (another_plane);

  The last line place the plane newly created in a table that you set above all create so that you have a way to target the various plans which, added to the process (moving, etc) them.  When one of them is no longer at stake, you can remove the table so that it gets not be processed.

• Mask does not move with the keyframes set

  Hello world

  Although I have been using this forum a couple of years now, I've never felt the need to ask a question, until now that is. First of all, I would like to take this opportunity to thank many of you for giving me the answers so solve my problem until I had to ask. Especially people like Bill Hunt and harm come to mind. Thank you!

  Now to my question. In my project have a key of track matte on top a video with a mask on top of it. A bit like that: '24 Kiefer Sutherland - type' edition. It worked fine for me in other projects. However, in this particular case, I set motion keyframes on the mask but it only begins to move somewhere else later key frames are defined. Pushing forward keyframes as workaround does not give a nice result. No idea what could be the problem here? I'm editting a project of 1920 x 1080 and the mask has the same dimensions. The update for first mentions something on Facebook that I don't care so I don't think a bug is removed with this upgrade and I'm afraid of updates will slow down my work flow (as was the case with the last update of Lightroom for me...)

  I hope that makes sense to any of you.

  Thanks in advance for your help.

  Kind regards

  Sébastien

  PS. If someone wants a screenshot, please explain to me how to do this, because I can't cut and paste here, it seems, and I don't know how Safe a screenshot on my hard drive (without using Powerpoint... awkward...)

  Surprise: I'm also Dutch. And it's a shame.

  But unfortunately we have English.

  You cannot adjust the video in the mask without either skew (which you did by changing the height and width) image or cropping. And the latter is your best option IMO.

  So nest the two clips with the transition.

  Draw a rectangular white in the Titler the same size when the video is supposed to go.

  The value hidden by approach the sequence embedded in the main timeline to track 2

  Add the wanted poster for track 3.

  In the nested sequence itself reduce you the video and the still picture (probably up to 50-60%) but do not uncheck the uniform scale and set the position.

  To get this just the mask on the video down and drop the opacity so you can see what you do, when done to remove or push the eyeball.

  Fact.

  Let me know if it will work for you.

  

  

• HP psc 750xi: printer psc 750xi stuck in auto test and ink cart move.

  When you reconnect psc 750xi printer for the office, when it is powered on, psc 750xi printer is stuck in the self test and ink cart move. The printer is recognized by the computer so that it seems to be a problem with the printer. Diagnosis of HP is nothing. Restart the computer and the printer does not change. It worked before I unplugged.

  Hi @JMC30,

  Welcome to the Forums of HP Support!

  I see that your HP PSC 750xi all-in-one printer is stuck in a "free test and ink carriage will not move. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  It seems that there might be a power supply problem or there might be a hardware malfunction. Please, try the following steps to see if we can solve the problem.

  Try the steps in the order presented:

  • Unplug the USB cable.
  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet (do not use a hub or a surge protector). This ensures that the printer is full on and can help this situation.
  • Connect the cable USB in once the printer has finished his departure without errors.

  If the problem persists, follow the steps in this guide: print cartridge error.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Can I integrate pictures and music in Movie Maker so that they can be placed on a DVD or USB thumbdrive?

  I finished a slide show with music.  I want to put on a DVD with a few more pictures of our high-school reunion and send him outside Alumni free of charge...  Is this possible?

  It would be useful to know the version of Movie Maker, you use...

  I'm guessing that you have saved the project i.e. .mswmm file
  is useful for a re-release in Movie Maker.

  If you save the project as a video file to .wmv format, that you can share
  with friends, burn it to a DVD, etc...

  In Windows XP Movie Maker 2.1...

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  Vista Movie Maker 6 refers to the publication:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

  If you're running Vista, you can add the Movie Maker video
  and your photos to a Windows DVD Maker project and create
  a DVD.

  If you are running WIndows 7 and Windows Live Movie Maker
  the following video shows how to save the movie in WMV format.
  And you can also use Windows DVD Maker in Windows 7.

  How to save the project in Windows Live Movie Maker
  http://www.YouTube.com/watch?v=ZyqZm5MBc7o

  If you need more details for a specific version of Movie Maker
  Let us know.

• scrolling problems, running of the depot, retro-typing and cursor and windows boxes freezing in the process of disappearance. Help!

  I have a dell vostro 1000 laptop with windows Vista Basic program. I aggravating problems with scrolling, on each program Web site. I have mozilla firefox, chrome, IE I started to scroll down a page and he yanks back the Summit. This also happens offline. I feel like a tug of war. The other problem is the flashing running drop boxes. When I go to lets say google and I click on the search box type it then starts flashing and hurtling previous search words. It is difficult to stop this. right now I have some difficulties to type this question because I'm going to type a few words and then the cursor disappears also a previous sentence. Sometimes when I go to type a word in the search type box the first letter and then the cursor will return to the leading space and adds the letters before the first letter of the word. I feel like sometimes I write backwards. Oh! time comsuming. It does also offline. I have a wireless keyboard and mouse that I sometimes use the mouse works, then suddenly, the page is pulled to the top and I can only It control a few times with the arrow keys on your laptop. Sometimes, this work and others do not. My AutoFill will in to fill out the forms but the name, the address box etc. will follow down the rest of the form and I do not see other issues. I tried Control Panel for mouse problems and the keyboard and settings sometimes move for the reason so I can't set some options. Can someone please help me I've been struggling with this problem for over a year.

  Hi Butterfly3,

  Welcome to Microsoft Vista answers Forum!

  ·         Does the problem occur even when working with other programs such as WordPad and Notepad?

  (A.) it can happen that if drivers are not updated, you may update the drivers for keyboard and mouse on your machine, see steps to update the drivers:

  (i.) click Start > type in Device Manager in the start search > expand the keyboard and the mouse in Device Manager > right click on drivers > click Properties > click on the driver tab > click on update drivers > click OK.

  Now, restart the computer and check if the keyboard and mouse works fine without any problems.

  (B) if the problem persists, you may need to perform the analysis antivirus on the computer.

  You can also perform a complete analysis of the Service from the link: http://safety.live.com

  A.) you can also check by reducing the hardware acceleration on your computer, follow the steps below to reduce hardware acceleration:

  (i.) click Start > click Control Panel > click on appearance and personalization > click personalization > click on display settings > click Advanced settings > click the Troubleshooting tab, and then click on change settings.

  Note: The settings will be disabled if the graphics card driver does not support disabling hardware acceleration.

  Move the hardware acceleration slider until it is one notch to the right of none. It is the basis of acceleration.

  Click OK twice, and then close the window.

  (B) I suggest that you might have to reset the internet settings explorer explore on your computer, download the Microsoft Fix - it of the link which automatically resets the default browser settings, see the link: http://support.microsoft.com/923737

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion Dv6 - startup with beep continuous and wouldn't start without the CD inside windows

  Hi, so I was using my laptop one day, perfectly fine and I got sick, so I had it turned off for about 2 or 3 days. When I turned it back on it started constantly beep (1 beep long, but 1 beep followed by another instantly.

  Now I tried to reinstall Windows 7 and did, but she continued with the same problem. So I did a format on my drive, and did install a clean windows 7, it completed the installation currently and reset to move to the next step (now it does not start back to the desktop to completely finish doesn't stop beeping and freezing)

  I did a hard reboot and that did not work and I cleaned my air, nothing has worked to resolve this issue, and I did nothing in 2 or 3 days, he was off (before that day, I played last, it was working fine, and the day I turned it off everything I've done has been playing World of Warcraft don't not download/install something again)

  I opened the back and checked my memory was sitting on the right, and my HARD drive was inplace correctly (at the beginning when it was happening, it would not be in the office without the Windows 7 CD inside, now after I did a clean install, he's not going to the office without worrying)

  I read another post with similar problems and plan to go out 1 of my RAM sticks and just try to run with 1 in, and switching them and try to see if that helps, but I'll do that tomorrow as I worked on this thing for hours tonight, I've been on the Windows 7 forum get advice from someone here, but he gave a link to read and agreed I should post here also.

  My suspisions that if none of this works, it's my Proccessor, my Ram or my entire CPU, which in this case, I know not what to do to do or if it is worth fixing (Ram is easy, but the other two seems difficult and costly) for any help or advice as I can get from you guys would be greatly appreciated it's a HP Pavilion dv6 notebook.

  Edit: I managed to enter the office and my clean install of windows 7 in full, and I made a default reset in the BIOS, will return tomorrow with updates I have.

  Yes mate, I waiting since I posted a reply with HP staff.

  They are * beep * ing pathetic and I would never buy a HP anything ever, I will also say to all my friends and tell all my friends to tell their friends and so on and so forth, do not to do. I will also let any forum I post on the same and any game online that I play on the same thing.

  I gave up and will just buy a new DESKTOP PC, they work better and you can actually solve the material problems if it's graphics/CPU things, unlike a laptop.

  If I were to ever get a laptop once again, it will not be a HP, I'd rather have nothing then use a pathetic HP product ever, I would rather die then have to use it. Their technical support is pathetic, and I had nothing else problems with the HP laptop I've had since the beginning.

  Because of their pathetic excuse for a computer/laptop, I am behind in my studies and have perhaps missed a few projects that I'm not able to repeat. Thank you HP, you are now under the dirt for me.

• Muse cc14 layers will be will not move in the layers palette

  Can anyone tell why layers in the layers palette ceases to be active and and does not move in the layers palette. This happens at least once daily, after working for a short period with muse?

  Thank you.

  Hi KenThree,

  Can you please try to reset the preferences of Adobe Muse CC 2014:

  Adobe Muse CC 2014 clear preferences-

  Windows

  Please rename the following two folders:

  %AppData%\COM.Adobe.AdobeMuseCC.2014.0

  %AppData%\Adobe\Adobe muse CC

  '%AppData%' is a shortcut which when entered in the upper part of a window of the file Explorer will go straight into the hidden folder AppData Roaming to your account on the computer.

  Mac:

  Remove the AdobeMuse-CC folder from the following location: ~/Library/Preferences/Adobe

  Empty the trash

  Kind regards

  Akshay

• TextFrame move to the previous position

  Hi Forum,

  Need help from you.

  After all the pageItems collection and resize (scale) to the new height page, I want to move the text Frames.geometricBounds [1] to the previous position before scaling were made.

  for example, before scaling: executives of related texts [i] .geometricBounds [1] is 12mm, 16.5 mm respectively.

  After consolidation and scaling of the group to the new height of page, I want to return the textFrames.geometricBounds [1] and 12 mm, 16.5 position.

  I tried to memorize the geometricBounds [1] frames of texts related to a table and after scaling was done, dissociated and tried to move all the frames of texts related to the previous position.

  var FO = app.activeDocument.textFrames.everyItem () .getElements ();

  for (i = 0; i < tf.length; i ++) {}
  var VAT = [];
  VAT.push(TF[i].geometricBounds[1].) Join ('\r'));

  Here scaling group is the new size of the page...

  If (tf [i]] .geometricBounds [1] < app.activeDocument.pages.item (0).marginPreferences.left;)

  {tf [i] .move ([tf [i] .parentPage, tf [i] .geometricBounds [0]]).}

  try to pass all the textframe to the previous position, when the textframe.geometricBounds [1] are not the left margin.

  }}

  trying to move all related texts frames which are not of the page.bounds [1] marginPreferences.left, after resizing the document.

  Thanks for help on this.

  Hello

  Try this to resize the last page of the doc. Do with the other pages if necessary.

  var
       targetPage = app.activeDocument.pages[-1];
       changedPageSize = [210,180];     // width, height
       currentPageSize = [
            targetPage.bounds[3] - targetPage.bounds[1],
            targetPage.bounds[2] - targetPage.bounds[0]
            ];
       wFactor = changedPageSize[0]/currentPageSize[0];
       hFactor = changedPageSize[1]/currentPageSize[1];
       mGroup = targetPage.groups.add( targetPage.allPageItems );
  
       targetPage.resize(
            CoordinateSpaces.INNER_COORDINATES,
            AnchorPoint.TOP_LEFT_ANCHOR,
            ResizeMethods.MULTIPLYING_CURRENT_DIMENSIONS_BY,
            [wFactor, hFactor]);
       mGroup.resize(
            CoordinateSpaces.INNER_COORDINATES,
            AnchorPoint.TOP_LEFT_ANCHOR,
            ResizeMethods.MULTIPLYING_CURRENT_DIMENSIONS_BY,
            [wFactor, hFactor]);
  

  Jarek

• HELP error code: 80072efe - cannot download or install security updates or update the definitions of viruses and spyware

  Help, please!

  I am running Vista Home Premium 32 bit on SP2.

  I just had my McAfee security expires and since I was not able to install security updates.

  I uninstalled McAfee and searched my system to make sure that it is completely gone, then I installed Microsoft Security Essentials.

  I was able to update its definitions of once and since I was not able to do so once again - instead, I get the error message "Virus and Spyware definitions update failed" and the code of error 0x80072efe

  I have since run a full scan of the system and the following were found on my system:

  -Trojan Dropper

  -Trojan notifier

  -Trojan Downloader

  -Virus: Win32/Alureon.H

  It is said that they have been removed - I'm not sure if they have something to do with my problems of system...

  Also my windows update still does not go to download security updates, and it still gives me the same error code.

  Is there a way to fix this?

  Thank you very much

  Also, the first update failed installed has been updated for Windows Vista (KB955430)

  The last successful security update was security update for Windows Vista (KB979309)

  The one who follows - update security for Windows Vista (KB978338) failed and there all security updates do not have

  I just had my McAfee security expire... I installed Microsoft Security Essentials.

  You should have uninstalled the McAfee application and download / run the tool to remove McAfee Consumer product and then installed Microsoft Security Essentials before as your McAfee subscription has expired.

  See...

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft