Definition of site - local info, remote info confusion

Similar Questions

• Using Dreamweaver with site put in place. Local and remote server

  Hello

  I just dreamweaver cs6 and I have problems with the management of the site.

  So far, I used dreamweaver cs3 and when you set up a new site, the site definition had the local Info category and separate remote info.

  Now on CS6 I can't set up individually to the same site, it does not give the option, it's one or the other which he does not work for me if I want to test a page locally, through preview on the browser, otherwise it will download to the server if I choose FTP. If I choose only local then I lose all ftp settings and once I did the test it will not upload to the server.

  Certainly there must be a work around this or something Im doing wrong, but I do not understand what it is

  There is no need to uncheck remote and testing. Previewing locally should work exactly as it did in CS3.

  You use a language on the server side? If so, expand the files Panel by clicking this icon:

  

  Then, make sure that the test server icon is selected.

  

• synchronization of local and remote sites

  Greetings
  
  I created a site on there and then he FTPed to a server to my ISP. The site was working fine until I did a few changes that I note below. When DW and I try to try to get a glimpse in a browser, I am unable to display all the files in any browser as DW is unable to locate the files locally or remotely.
  
  I get the error message is:
  Firefox can't find the file at / _ / _ / _ / _ / ThankYouVeryMuch/Website/tyvmi 3/index.htm.
  
  Changes to the site:
  
  -J' reorganized my folders locally by creating a new root folder. When I tried to add 3 pages, I got several error messages. One of them was that DW did not find the homepage. Another was that it was impossible to create the site map and if I'm not mistaken DW was unable to create cache files.
  
  -My client had a friend add a few analytical Google on the site. This person also created a XML sitemap. Of course, local and web sites were not synchronized so that I was getting error messages more.
  
  -J' then downloaded of the site to a new directory in the new root folder that I created above. This site downloaded my local root directory in Site Manager and is located at ./___/___/___/___/thankyouverymuch/website/tyvmi 3/index.htm
  
  -Here are my current directories for the site thankyouverymuchinc.com:
  
  Site name: thank you very much Inc.
  
  Local: ThankYouVeryMuch
  -> Website
  -> tyvmi 3
  -> index.htm
  -> pages
  
  Remote control: host: ip address
  -> www/htdocs /.
  -> index.htm
  -> pages
  
  Thank you very much
  Marlene

  > ATTENTION: the selected folder contains no home page of the current site.

  Open the site for editing definition.
  Click the Advanced tab to do this faster.

  in the plan section of the site, change the location of this site "homepage".
  It will be the old information with the? in the name of the folder.

  Also, check the section local news-> default pictures folder location if
  you have completed as before.

  --
  Alan
  Adobe Community Expert, dreamweaver

  http://www.Adobe.com/communities/experts/

• When you expand to show the local and remote sites in DW CS6 how local to be left?

  When you expand to show the local and remote sites in the previous version of DW, the type of files (local or remote) selected when you see do not both, automatically came on the left.  I liked local when I'm editing and when I'm ready to download I expand to see the two premises remotely.  Before, the one you selected, in my local case, was always displayed on the left.  In CS6 when I local selected before I develop, the local is now right and distance on the left. For me, this is not correct.  I find that having local on the works of best left to me as reading, left right, I want the room on the LEFT, so I put the update on the left of the remote control on the right.

  in DW CS6-> How to get the local to be on the left?

  Edit > Preferences > Site

  Change the right to the left on the top.

• With the help of local and remote servers

  Can someone point me to somewhere that explains the use of servers the remote and? I have set up a local server (using XAMPP) and also a site remote dev on my hosting server. I'm assuming that I can choose to download files on the local or remote as I wish (local test and publish remotely). Is this the case? Currently, I can't download files on the remote server. When I "put", the files just to go to the location of the test (localhost).

  Any ideas?

  You test locally on XAMPP (or similar) and when ready, download on your remote server. If using could not upload to the remote server, it means that you have not set the remote info in your site definition.

  The only thing you can not download through Put is the database. You must create a database with the same name on your remote server. If you have data that you want to download, you can use phpMyAdmin to export to a .sql file. Then use your remote version of phpMyAdmin to import the data by accessing the file .sql on your local hard drive.

• What is the best way to work! Local or remote...

  I work with Dreamweaver for about 4 months now, but I'm hard-pressed to find how the more preductive to work.

  You work in the local or remote view.

  With local all links with all images need to be changed when goes live, but it's a lot of work to have to go through all the pictures again.

  What do guys do?

  If your link paths work locally at the premiere, but doesn't work on the remote site, there is definitely something wrong with your site definition.

  The site root directory should not appear in your local files Panel.  It must be set in your settings of remote server only.  See screenshot:

  

  Nancy O.

• FTP and Site Local file, simple question.

  I'm extremely new to FTP and downloading sites, etc., but to learn.

  I have two questions and they are probably both pretty stupid, but here they are:

  1. When you download your site you:

  Download the entire site (local site folder)?

  or you simply upload the pages that are going to be online?

  or is this your personal preferences and does not really matter?

  2. If you have downloaded the entire site there is something wrong with the fact that (security issues, etc.).

  Additional info: I have just a site that no one else is working on or has need access too except me. Passing by JustHost.

  Thank you for your time.

  When you upload your site you must download all files that are part of this site and relate to one another.  This includes images, pages, style sheets, and no script file, you have.  The first time around it will probably be the entire site.  After that you need to download that you edit the files.

  If you want to avoid downloading some files, you can hide them.

  If you use Dreamweaver synchronization utility it will give you options to transfer files among other things

  So that, it is best to set your site as a first step

  Your host will tell you your FTP settings and the directory to download.  Your index file (homepage) go and the all elsevshould follow the same structure as in your local site folder

  Martin

• Firefox does not display the changes on the site after the remote host; Refresh does not work

  I recently had to reinstall Windows 7 on my machine, and since it has been wiped off I installed CS5, reconfigured my Dreamweaver site and made changes to our page index.html (so far).  After you put the files on my remote server, I noticed that Firefox does not display the changes I made to this file - it is to show the page previously recorded on my CS4 version.  Thinking it was a cache problem, I emptied, refreshed/reloaded several times, restarted Firefox - nothing has worked.

  I checked the page in IE8 and all changes are not displayed correctly.  I used BrowserLab to display a preview in IE, Firefox (same version 3.6 which I use) and Safari, and all 3 display correctly version update of the page.  Visualization in 'live' of Firefox seems to be the problem, and I've looked everywhere for answers. Help is needed and appreciated!

  It is possible that you redefined the site incorrectly and put the files to the wrong address on the server. Carefully check both your local and remote sites definitions.

• Internal access to the site at the remote location via wifi

  We have an internal site to A location and we have a 2 layer hose B location. When you use the ethernet connection, site B can access the site. What we want to do, is allow them to access via wifi with the VPN site to site (who currently works) hosted by of our Sonicwall.

  How this is a problem is our network is separate; wifi at site B is on the DMZ. We added access rules to allow the DMZ-> VPN traffic on the site, which did not work; No ping, no traffic, no communication. We've also added policy NAT, same story.

  My theory on why it does not work is because the VPN tunnel to one SW to another is related to X 0, but even after enabling access, it's the same result.

  Any help would be appreciated. Thank you all!

  Hello

  Is DMZ subnet to site B added under 'Local networks' VPN B Site and under 'Remote Networks' policy in Site A VPN policy? If you have then SonicWALL auto-créera access rules to allow WiFi traffic. Basically, you need to add the DMZ subnet in site B the VPN policy.

  You can also see the article: https://support.software.dell.com/kb/sw7725

  #IWork4Dell

• 2 VPN SITE to SITE with ACCESS REMOTE VPN

  Hello

  I have a 870 router c and I would like to put 2 different VPN SITE to SITE and access remote VPN (VPN CLIENTS) so is it possible to put 3 VPN in the router even if yes can u give me the steps or the sample configuration

  Concerning

  Thus, on the routers will be:

  

  Cisco 2611:

  LAN: 10.10.10.0/24

  access-list 100 permit ip 10.10.10.0 0.0.0.255 10.10.20.0 0.0.0.255
  

  access-list 100 permit ip 14.1.1.0 0.0.0.255 10.10.20.0 0.0.0.255--> VPNPOOL

  !

  10 ipsec-isakmp crypto map clientmap

  defined by peer 172.18.124.199

  match address 100

  !

  IP local pool ippool 14.1.1.1 14.1.1.254

  !

  access-list 120 allow ip 10.10.10.0 0.0.0.255 14.1.1.0 0.0.0.255
  

  access-list 120 allow ip 10.10.20.0 0.0.0.255 14.1.1.0 0.0.0.255 --> NETWORK REMOTE
  

  !

  crypto ISAKMP client configuration group ra-customer
  

      pool ippool

  ACL 120

  !

  Please note that the configuration is incomplete, I added that relevant changes, you should bring to the allow clients of RA through the LAN-to-LAN tunnel, of course, the LAN-to-LAN settings should match to the other side of the tunnel that is mirror of ACL, NAT and so on.

  HTH,

  Portu.

• Local and remote to the same virtual machine replication?

  Is it possible to configure replication for a virtual machine to replicate locally and remotely?

  For example:

  ServerA is my server I need to replicate.

  I set up replication for this VM ServerA to storage replicated in the same site (local)

  I opened the replication again for ServerA VM and I can only see/manage this replication.

  I would like to reproduce ServerA VM offisite in a remote cluster of VCenter for DR purposes.

  
  

  Is this possible? What I am doing wrong?

  same source VM cannot be replicated on the two sites with vSphere replication targets.

  If you use replication level storage table between the source to the target and the second replication, you use the replication of vSphere, it would be a different story.

• Local and remote server reversed in CS5

  I've just upgraded to Dreamweaver CS5 of CS3. I usually download files from local to a remote server by clicking on the button "expand to display local and remote sites" and drag the file on the local server to the file on the remote server. In CS3, the local server is on the left and the remote server has been right in the expanded view. In CS5, it is reversed, with the local server on the right and the remote server on the left. Recently I accidentally did drag a file to the remote server on the local server, crush a lot of work, I'd just do it, because I was used to the servers being on opposite sides. Very annoying, to say the least.

  Anyone know why they did this way in CS5? Is it possible to move the view so that the local server is on the left and the remote control is on the right in the expanded view?

  Hello Sarah,.

  You can change locals and remote to your wish

  On Windows:

  (1) go to the button Edit on the menu bar

  (2) select Preferences

  (3) in the preferences dialog, select site from the catagery option

  (4) on the top, you will have the option to display local and remote and the optoin side where you want to place

  On Mac OS

  1) go to Dreamweaver on the menu bar

  (2) select Preferences

  (3) in the preferences dialog, select site from the catagery option

  (4) on the top, you will have the option to display local and remote and the optoin side where you want to place

  I enclose the snapshot of the Preferences dialog box with the circle where you need to work

  

• Time zone - local and remote server are different

  Hello

  DW CS4.

  My computer and I are in PST and my host is in MST.  When a file is transferred to the remote server, the server gives the timestamp of the local MST.  By example, if I save a file at 5:30, my time and my transfer it immediately, on the remote server it will show 06:30 p.

  QUESTION: This time zone difference will create a problem for DW when turning or synchronization?  FileZilla has an adjustment to account for the difference, but I don't see a framework like that in DW.

  Thank you.

  John

  DW synchronizes local and remote filestamps with precision in different time zones via an XML file: dwsync.xml in a folder hidden _notes.

  It seems to work well most of the time (and you do not normally need to worry) that problems sometimes arise if dwsync.xml files is corrupt, but if you delete it, DW will be re - build it.

  See here for more information:

  Synchronize the files on your sites the remote and

  http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7EA 4a.html

  The problems of synchronization in Dreamweaver CS4

  http://kb2.Adobe.com/CPS/405/kb405835.html

• trying to browse some of the sites locally that we get the following error: HTTP error 500.19 - Internal Server Error

  HTTP 500.19 - internal error in the server error

  Hello

  We have Windows 2008 R2 Server, 64-Bit

  IIS version: 7.5.7600.16385

  We had several Web sites for our clients on this IIS server.

  While some of the hosted site work properly, but when you try to browse some of the sites locally, we get the following error:

  HTTP 500.19 error - internal error the requested page server is inaccessible because the configuration data of the page are not valid.

  Hello SGTPrasad

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How to connect the local and Remote Desktop (Android OS) application simultaneously without one shot the other in the login screen?

  I want to connect to my local office via the remote desktop connection, but keep both connected at the same time without being local or remote kicking each other in the bridge/connection between the two. I tried to download and patch the termsrv.dll using UniversalTermsrvPatch - x 86 .exe for Windows Xp 32-bit SP3 compatibility. But still... Settings app may prevent 2 to be connected at the same time? If so could Microsoft please update their app. Any suggestions...

  Try this link for desktop connection xp remotely.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=7208