definition of test of the site server

Similar Questions

• Test against the remote server

  Y at - it no way to automate or simplify the advancement of confirming a file is good on the testing server to upload to the remote server (production)? AFAICT, it seems that I have to manually upload the files to the production server if I have a defined test server. (I use a dynamic content; I know about the .tmp files, but see more to why this isn't what I want). From what I see, the better I can do is the server of your choice via the drop-down site button and use the synchronization feature.

  Maybe the distance/test config is not what I should do, but what for me has been not only have a place to try things, but also use the test server as a production server temporary on these occasions that the production server must be taken offline. (If I have the right SVN, this isn't a viable option either, besides, I have the server backed up using 3 different applications). So, I want my test server files to be a copy of my remote server, including the latest files.

  Suggestions?

  The test server is usually just to test and you should never really put a test server to a live server.  DW can manage several remote servers, but as far as I know, even with CS5.5, you can upload to a remote server at a time.  As the servers that you are talking about are in the same data center, it should be possible to configure a second server for redundancy so that if one blocks the other picks up the load.  However, I would say that this is not the appropriate forum to get help on configuring redundancy in a datacenter.  If your two servers are in 2 data centers different it's a whole other discussion.  I would like, there was more that I knew about the subject, but I'm really not familiar with the installation of the network of websites of the scale.

• CFFORM - form validation does not AT ALL during the test on the production server

  So I did all my tests on my local test of Coldfusion server. All form input boxes are validated correctly, with a dialog box popping up when it has not been completed

  When I upload it on the production server, also running ColdFusion 8, it not there no event at all - no dialog boxes, cfform validation etc...

  I use the same client computer to test locally as I test it on the web, and yet I get two different results! Any ideas?

  THE FIRST THING to check in this case, it is that you can connect properly to the/cfide/scripts/folder via the web site on the production server.  This scripts folder is where ColdFusion retains all its javascript, CSS and other client files used in computing, the and other client UI features.  If your browser cannot access these files, these features will not work.

  Rapid tests is just to put the /cfide/scripts/wddx.js in your browser on the production server and see if you get the right javascript file.  If this isn't the case, you must make sure that there is a CFIDE virtual directory configured in your web site and that this directory is readable by users.

• A white blank screen as they were returning to the page of the site server page.

  I'm trying to manage my site webapp hosted on Intext Cloud FX. The scenario that I face is the following

  1. I submit to the payment server servlet https://abc.com/paymentcall page.
  2. the server responds with an interim page (form with hidden fields), with a form by submitting parameters to the url of my Web site

     (http://a.com/checkout/paySuccess.mobile).
  

  My application is hit in the second stage when the server responds with an intermediate page and it shows a blank white screen.

  Any help in this regard will be helpful.

  Concerning

  Found the solution. Problem is that I tried to submit the form to the encrypted page (https) page (http) unencrypted. On the firefox browser, we get an alert message about this but on hosted application, no such message only made its appearance and comes only from the white screen. When submitted to encrypted (https) page everything has worked.

• Test of the RADIUS server options

  Hello

  Does anyone have experience in the radius server availability tests? I have what the switch is used to test the availability of the radius server and what measures he will take after the detection of server are dead? Setup is done with ISE 1.4.

  Hello

  Because how switch contact RADIUS and how to configure the switch for dead timers, I will redirect you on the Cisco documentation which is very simple and complete as well.

  http://www.Cisco.com/c/en/us/products/collateral/iOS-NX-OS-software/iDEN...

  All parameters to mark a server as dead and how long it will be considered as dead are tweak-able. Setting dynamically some servers as dead if no responses may result in better performance of RADIUS response.

  Thank you

  PS: Please don't forget to rate and score as correct answer if this answered your question.

• Migrating from Test to the new server - OBIEE

  Hello
  
  
  I was "assessment" OBIEE perfect on a test server small for awhile where I did considerable work on the two reports of the writing. development of dashboards, user security configuration and architecture of data needed in the physical layers / business model and presentations in administration of BI.
  
  My question is, what is the best way to transfer the solution in its current form to another server, without having to make extensive rework?
  
  
  
  Thanks for any advice,
  
  
  Robert.

  Lowest level: copy of the catalogue of the RPD and web on the other server, set the NQSConfig.ini and instanceconfig.xml and off you go.

  That's assuming you don't have change web messages, add custom images or files, change the styles or skins, you're still pointing to the same data sources etc. etc.

  You should take a look at one of the brands of earlier descriptions: http://www.rittmanmead.com/2008/04/28/migration-obiee-projects-between-dev-and-prod-environments/

  See you soon,.
  C.

• Another scenario of test - isolate the recovery Site

  Question for the gurus out there:

  Installation: We have a simple configuration with a single restore site protected and unique. The configuration of the network is stretched VLAN. All the tests to bubble networks works as advertised, and we are very pleased with the solution so far. In addition to virtual infrastructure, there is a certain physical systems that make up the environment, and the goal is to make a complete failure on the test of the site in the coming weeks.

  Test case: the proposed solution is to drop the link between sites protected-recovery and turn the entire failover datacenter in a bubble (only accessible through VPN links). Once the test is completed, we would have back then all the changes on the recovering site, so that it protects once more the main site.

  Question: Would it be possible to rotate part SRM to the test in 'Test' mode only - that she set up the whole environment attached to the VLAN direct (who are now isolated from production by dropping the link of the site) and once finished, reset the recovery by the normal site (i.e. "Test recovery finished, press on continue clean...") ») ? I don't see why it wouldn't work, unless for some reason, the test procedure requires communication between the sites that the effective recovery process does not.

  Thanks for any comments.

  Hello

  Recovery test requires no connection to the protected site as far as I know.

  About the networking part of your question, when you change a recovery plan, on the network management screen you have an option to configure the test networks. These networks is used during the trial instead of bubble networks (default).

  SRM will be cleaning the virtual environment, but how do you cleaning physical servers?

  For how long you plan to run on the recovering site? You have sufficient capacity for snapshots on your storage array?

  Michael.

• Is there a way to recover a password saved the site settings?

  In site definitions > remote info - I want to use an ftp program dedicated and lost a password for one of my sites. Is there a text file on my computer, where I could retrieve the said password?

  Is the name of user and password to connect to the database that drives your site.

  I think the OP is looking for the FTP password for the remote server.

  The version in plain text to the FTP password can be retrieved from the encrypted version of the password found in the .ste (which itself is an XML file) file of a site definition after export via the Site of DW Manager.

  http://apptools.com/password.php

• Dreamweaver CC 2014 will not save passwords for site server

  Since the update Dreamweaver CC 2014, he asks a password of the site server whenever I try to download files. Even if I toggle the checkbox 'Save' on, this will be remembered passwords as long as I keep DW running. If I leave DW, it asking you the password again when I try to connect the server to a site. I really hope there is one solution other that recreate the totality of my site FTP connection information. I have several sites.

  Found this

  https://helpx.Adobe.com/Dreamweaver/KB/FTP-credentials-remembered-Dreamweaver-Mac.html

• Virtualize the existing server

  Hello world

  First of all, I want to mention that I'm kind of beginner to virtual systems.

  I have a project that I need to virtualize one of our existing server. I have a HP ML350 G4 test the system and running server current which is HP Proliant DL380.

  All I want is drag a system virtulazation O/S (Win2003) current with the server. without losing anything on the server (if possible).

  I installed Windows Server 2003 standard on the test server (HP ML350) I installed ESX Server 3i. ESX3i works well, but the ' 03 victory.

  So, my point is how to install ESX3i (or any product free compartable) on Windows 2003 is installed system without losing win ' 03 and convert win'03 to virtual pc and move it to ESX3i. (IE, using vmware converter)

  Is this something impossible that I'm looking for? (See attached photo)

  Kind regards

  Serhan

  Your VM is a backup of the server running.  There are no worries!

  You can also install the converter on a normal PC and access your existing server on the network.  Once the conversion process is complete.  You have a copy of your existing server.  You may install VMware Player on the same PC, and then 'test' that the virtual machine works exactly has your existing server before installing ESXi (disconnect the existing server on the network before you start your virtual machine in order to avoid conflicts of network address).

  You should then install ESXi that replaces the Windows operating system currently on the host computer.  When you do that, you can copy the previously converted VM / tested on the ESXi server to run.

• Dreamweaver does not connect to the localhost server

  Hi, I'm pretty new to CS5 and have been learning mainly the CS5 Bible.

  I use an Imac under Snow Leopard.

  Downloaded MAMP and installed ok - start page display and the States servers works ok.

  File server root is the user/Applications/MAMP/htdocs

  have copied the Techniques folder in the tutorial in this folder and have imported the included database in myphpadmin and everything seems ok

  Go to configure the site server, following the instructions in the book, and this is then I try to connect to the database.

  Dreamweaver won't give the following error message.

  

  It seems that I am without mapping to the right folder. I guess I should be reviewed in the htdocs folder, but it does not connect.

  Can anyone help please with a speech through this configuration.

  Thank you very much.

  NottsPizza

  You use the default MAMP ports or have you go to the preferences and set the default value of Apache/mySQL?  If you left on the default MySQL port is "8889" which means that your mySQL would read 'localhost:8889' because otherwise DW research only on the default port.  Everything seems in order.

• Looking for test Web site that is located on the BB Server

  Watch to see if anyone has already imagined a script located on the BB itself server rather than the client computer controlled before eventually to reinvent the wheel

  here... what we are trying to do is to test external connectivity to multiple URLS to the web server that hosts these sites. All scripts in BB I have met so far have been those who sit on the host site and to report to the BB server, but which would simply check that the local host is at the service of the sites, not if the URL is resolved from a different network location.

  Thank you

  Darryl,

  I have one or two who might work for you.

  Email me and I'll give you an example

  Paul Yahnig

  Systems, the Services of Infrastructure Engineering lead

  Tweddle group

  North America-Europe-Asia

  1100 112th avenue NE, Suite 300

  Bellevue, WA 98004 USA

  Office: + 1 425-381-2571

  Phone: + 1 425-281-4215

  SMS: [email protected]

  Skype: paul.yahnig

  AIM: paulyahnig

  PGP KEY: 1773E29D (@ PGP.) MIT.EDU)

  [email protected]

  www.Tweddle.com

  Information development, management & delivery

  TS16949, ISO14001 and SFI, PEFC and SGP certified

  Think about the environment before printing this email

  Privacy WARNING: this email contains information exclusively for the use of the individual or entity named above. If you are not the addressee or the employee or agent responsible for delivery to the intended recipient, any dissemination, publication or copying of this e-mail is strictly prohibited. If you have received this email in error, please notify us immediately by e-mail and delete it from your system.

  -¬ 2011. Tweddle Group, Inc. All rights reserved. All communications.

• Links to the site fail on the local test server

  Using CS4/WAMP/XP, I have a test set up server. Everything works fine except that when I specify links to the site, on the testing server they not go back to localhost, localhost/Frances. They work very well on the online site, but not on my test server.

  This prevents me from using (and stable) "include" files for things like menus when parts of the site are in different folders.

  I have my setup of site as follows:

  Local news

  Name of the site 'FFG2009 '.

  Local root folder C:\wamp\www\Frances\

  By default the folder images C:\wamp\www\Frances\images\

  HTTP address: http://localhost/Frances/

  Test server

  Server model: PHP/MySQL

  Access: Local/network

  File of the test server: C:\wamp\www\Frances testing\

  URL prefix: http://localhost/Frances/

  In my Apache configuration file, I have a virtual directory that is set up like this

  Alias /Frances/ "c:/wamp/www/Frances / '.

  < directory "c:/wamp/www/Frances /" > ".
  all options + includes
  AllowOverride all
  Order allow, deny
  Allow from 127.0.0.1
  < / Book >

  I was informed that I could temporarily change the folder of Apache webroot on my record "Frances", but this stops other things like PHPMyAdmin to work. I also have other sites in my www directory and I don't want to change the rootweb Apache Directory each time I need to work on another site.

  Is it possible to set up my site in CS4 so that the root links site go to localhost/Frances rather than just localhost?

  Thank you

  Tone'z

  It's something I've had to do for some while now. Alias simply create shortcuts to a directory, they do not have their own directories 'Document Root'. I'm pretty sure you need to do is to set up a virtual host using WAMP (in fact, Apache, any installer is used). I'm almost certain that one of the books of David Powers cover the subject, but the one I apparently was already packed (moving soon).

  I followed the steps of http://blog.jlbn.net/?p=23 and it was quick and much easier than I expected. He missed for subdomains, but I found the solution quickly to the http://www.sitepoint.com/forums/showthread.php?t=394472 (I don't know why I didn't get it virtual host, but Google has gotten in the way :-))

  So now I have http://localhost , http://test.localhost and a true domain that I own (it's not hosted online) all running on my local computer.

  In your case, you might want to implement the subdomain http://frances.localhost so as not to cause interference with the actual domain name. Or make sure you have the server offline. If you don't know how to do this in the file httpd.conf, then in WAMP, it's two mouse clicks: WAMP-> put in offline mode. It is a good idea in any case

  Thank you for pushing me to learn how. It was high time that I updated in any case my installed WAMP.

  HTH

  --
  Mark A. Boyd
  Keep-on-Learnine :-)
  This message was processed and published by Jive.
  It will not be considered an accurate representation of my words.

• move the site to a new server windows

  I have an Intranet site that has been created in Dreamweaver 6, not by me, and I need to move it to a new server.  The old server running Windows Server 2003 and I need to get the site up and running a Windows Server 2008.  I'm a total newbie in HTML and Dreamweaver.  I have Dreamweaver CC 2015 running on my PC and I created a local site that is synchronized with the existing site.  Any information would be greatly appreciated.  Thank you!

  In a perfect world, I would not anticipate any problems.

  I would create a new site definition, the same as the current site, with the exception of remote server information.

  Upload all your files and subfolders to the new server and test it.

• How to make the site root-relative links work in DW and the server?

  See details on buggy behavior DW image link, below. My question is:

  (1) how the site root-relative links work in DW and the server? Or...

  (2) how to reliably automate change of hundreds of links relative to the root of the form

  /images/image.jpg relating to the document?

  In other words, to

  .. /images/image.jpg or

  .. /.. /images/image.jpg or

  .. /.. /.. /images/image.jpg etc... According to the location of the directory.

  The old format (/images/image.jpg ) used to work properly in my previous Setup of DW 8 but appear grey in DW after 'redevelopment' of mac cs5.5 DW. (they look good on the server, but it is difficult to change the image-heavy pages locally when they are all gray).

  I tried to change the files to how DW creates relative links root now:

  /public_html/images/image.jpg, which is a flow of root very easy, attractive, since there is a one-to-one mapping. These look great in DW, but are detailed on the server!

  I looked at the "Advanced" site configuration, and it seemed that it would be possible for the nuke part /public_html/ of my server info... but it also seemed that there was the potential to do damage, modification of these parameters, which are automatically generated from our server connection settings, which seem to work.

  The "links from the document / site root" toggle... did change how DW interprets existing links, or simply change the value by default when you add a link?  I did 80% of the file... before paper links I wondered if relative to the root is not better?

  Of course, it seems less ambiguous for all these pictures if theres a way to make the relative root works for the mode of creation of DW, DW link checking and server.

  Summary of the buggy behavior: (see the test with images here)

  
  

  'old style' link of the root of the site

  /images/img_book/WScover120x150_NEW.jpg

  Design veiw in DW: broken (grey w / broken icon)

  Check DW a link: "external link" (i.e., unverifiable, + file might appear orphaned)

  Browser: good

  Ease of switching: n/a (existing format)

  'new style' link site root

  /public_html/images/img_book/WScover120x150_NEW.jpg

  Design veiw in DW: good

  Link check in DW: good

  Browser: broken

  Ease of switching: easy

  Link to document

  .. /.. /images/img_book/WScover120x150_NEW.jpg

  Design veiw in DW: good

  Link check in DW: good

  Browser: good

  Ease of switching: hard (how to automate)

  Absolute link

  http://www.oasisdesign.net/images/img_book/WScover120x150_NEW.jpg

  Design veiw in DW: broken (grey w / broken icon)

  Link check in DW: external (i.e., unverifiable, + file might appear orphaned)

  Browser: good

  Ease of switching: n/a... not a real option

  Thank you!

  Similar discussions on ' / '.

  Think of your site definition is set up wrong.  public_html should not be to anywhere in your local site.  It is up to your remote site under the directory root definition.  See screenshot.  In my example, the root directory of the server is htdocs /.  This is where you put public_html

  

  Nancy O.