Definition of the properties of virtual machines in a paralytic

Similar Questions

• Definition of reserves on the running JAVA Virtual machines

  I recently came across an overview of VMware performance that had a page essentially recommending reservations memory setting for the running Java virtual machines (see table). We have Java environments and did not have performance problems or complaints so, I doubt that I would implement any changes. However, I am curious to know if it's even a better practical recommendation, I could not put the date on the document so I wanted to see if someone had updated or current information for vSphere 4.X, 5.X environments.

  In General, we only use reservations memory to avoid the overhead administrative and operational increased. If we have never not a necessity, I prefer to use reservations to pool resources rather than granular level VM reservations.

  In my opinion, if you use the reservations are a regularity no exception in your environment, then you can use these rules.  That said, if you don't have no problem, I wouldn't change anything.  I've also linked a new document below.

  http://www.VMware.com/files/PDF/Techpaper/Enterprise-Java-applications-on-VMware-best-practices-guide.PDF

• Report on the ability of virtual machines VMware Cluster

  We started to evaluate Foglight for capacity planning and evaluation. One of the reports that I believe is interested in our leadership is the "ability of virtual machines VMware Cluster" report. I see that the report provides a value for the VMS remaining. I would like to learn a little more about this value and how is it calculated:

  1. What exactly a 'virtual machine' represents in these reports?
  2. Can a similar report to run using a specific type of server based on the allocation of resources or patterned after an existing VM wokload?

  We are a small, medium and large VM offering based on the allocation of resources. I would like to change the report to display the number of each type of virtual machine I have available... or pointer pointing to an existing virtual machine, and according to its resources and workload, determine how this server, I have available.

  It is based on the average size of the virtual machine in the cluster.  If you look at the dashboard of capacity management in the user interface, it can give you more details by cluster.  It is based on the average of the use of min/max/AVG across all virtual machines in a period given (usually 90 days).  This can not be changed today, but there is work to allow lets you specify a size of slot for something as small, medium, large, etc...

  This feature exists in the Foglight for virtualization, however Standard Edition.  It might be interesting to watch this, if you need it sooner.

• Report on the number of virtual machines by datastore

  Hello

  I use vFoglight 6.6.2. I try to have a report generated every week that contains the number of virtual machines running in the data store. But I don't know how to create a table of edge/report for these details.

  request for expert assistance.

  The following query gives you so all virtual machines on the specified data store

  Using the following mandatory input parameters:

  {VMWDatastore}: type foglight - 5:VMWDatastore

  Select objects of type Machine virtual VMware in parameter {VMWDatastore}

  root of {VMWDatastore} / virtualCenter/virtualMachineCollection/virtualMachines

  where:

  ({VMWDatastore} to /datastores and)

  (/ vmState/current/value is equal to "receiving")

  Like query UI setup will allow you to use it as a dashboard of entry.

  Try around with the request and let me know if this help.

  Best regards

  hEINER

• How to import the list of virtual machines to complete a table in a workflow

  When you run the followingworkflow/library/vCenter/batch/run a workflow on a selection of objects

  How import you a list of virtual machines to complete the table of virtual machines?

  At this moment we are manually by selecting the virtual machines and adding them to the table individually which is very tedious. We would simply import a list.

  There is a certain ways that you can do what you're trying to do, but from your description, it looks like a wrapper will work best.  I enclose a simple workflow that loads the table from a csv file.  There is no error checking going on, but it should help you get started and you can expand on it from there.

• How to count the number of virtual machines on an ESXi server via command line

  I want to know the number of virtual machines running on ESXi. What is the command so that it...?

  "vim - cmd vmsvc/getallvms"

  This order list of the early running of the ESXi Server virtual machine, but I want the number (integer)

  Help, please...

  Thank you

  M@RK! V

  Hello

  You can use the PowerCLI command to get a VM number:

  SE connect-VIServer-Server "ESXi host or vCenter server.

  (Get-VM-location 'ESXi host') .count

  Elodie

• The Clean Up Virtual Machine - Fusion 7.1.1 progress window size

  Having a place in Fusion upgrade 7.0.1 for 7.1.1 in the VMware Tools update and Mountain Lion, size parameters > general window that opens click the button Clean Up recommended at the bottom of the VM library extends horizontally at the edge of the screen of the monitor (27 '' LED Cinema Display (, Mac Pro 5.1) or beyond, so there to drag to the left to reach the Clean Up Virtual Machine button. This happens on all Windows virtual computer I tried on. I use merge for quite awhile (version 2 and later) and have never seen that happen before. Fortunately, it is on a backup test drive so my boot partition, always running 7.0.1 is unchanged.

  Any ideas on how to fix this would be appreciated.

  You have long strings in the Notes field? If so, this is a known bug with a fix coming - the format code OSX on 10.8 a of bugs that are fixed in later versions. By changing the text to be shorter, and then reopening the settings pane, you can work around it.

  If it isn't, please join or send me a screenshot.

• The substitution of parameters of the device when the cloning of virtual machines?

  Hello

  I'm trying to find out how I can substitute the disk space for a HARD drive or the network for an adapter in the cloning of virtual machines.
  I thought it should be in the VirtualMachineCloneSpec, but it doesn't seem to be an option for him. I forgot something?

  Thanks in advance.

  So it turns out that the code was perfectly fine, the problem is that in my lab I have always tried setting disk space on something weaker than what it was before that does not work.

  Thought, after verification of the documentation for Set-disc hard, as I wanted reconstruct this cmdlet to see what he's doing: Set - hard - drive vSphere PowerCLI cmdlets reference

  Thanks again for your help

• What is the open file Virtual Machine vCenter web console?

  What is the open file Virtual Machine vCenter web console?

  I have about 20 MV listed here and the rest under VMS.

  Thank you

  Dan

  Records are a method of setting permissions in VMware vCenter. They form a triage unit and behave as a logical separation. When you first add the hosts to vCenter and you have all the files, there will be a default folder created for you as Richardsonporto mentioned.

  Later, you can create new folders and separate the virtual machine by drag-and - drop of their.

• While trying to see Planner installation and operation, the test in local mode, the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  While trying to see installation and operation Planner, the test in local mode with only 1 VM the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  There may be a lot of problems in the desktop VM. Agent service see Planner is not running in VM Office. You can check in the event viewer to see what kind of error occurs. The most usual error missing file IP.txt c; drive or harness IP in the IP.txt produce if there is.

• Create the list of virtual machines to exclude the script through .csv file?

  Hello

  I have a script that runs all day off hours to check my VMs respect some things, like having the option to 'VM tools upgrade policy' checked. The script will export a list of virtual machines that DO NOT have this option enabled and then later to fix the problem. Now, for some specific VMS, I don't want to have the option active and want to exclude them from this review. I try to add a list of these virtual machines I want to exclude from my check script of VMTools_UpgradePolicy via a .csv file containing their names. Here's what I have:

  ##############################################
  #VMTools update during the feeding cycle - report
  ##############################################
  function Report_VMTools_UpgradePolicy {}
  $list = import-Csv "C:\VMware\PowerCLI\Scripts\EXCLUDE LIST\EXCLUDE_vmtools_upgradepolicy.csv".
  foreach ($entry in $list) {$exclude = Get-VM-name $entry. Name}
  $vms = get - Vm | where {$_.} Name - not $exclude - and (Get-View-Id $_.) {ID). Config.Tools.ToolsUpgradePolicy - eq 'manual'} | Select name
  $vms | Export-Csv "C:\VMware\PowerCLI\Scripts\REPORTS\vmtools_upgradepolicy.csv" - NoTypeInformation
  }

  The content of the EXCLUDE_vmtools_upgradepolicy.csv is as follows:

  'Name '.
  "VM1.
  "VM2.

  "VM3.

  I try to get all the virtual machines in my environment who have the ToolsUpgradePolicy - eq 'manual' (unchecked), AND which do not match any of the names on my list of exclusions (VM1, VM2, VM3). My script so far will do what I want, except that only the last entry in my list of exclusions will take into account. VM1 and VM2 will still be reported as VMs that need to be addressed.

  I'm not sure that I am taking the right approach with this, I will continue to seek a solution for what I want, but any help would be appreciated! I prefer to make my list of exclusion to a separate file, for example "EXCLUDE_vmtools_upgradepolicy.csv", because I want that other administrators to be able to just open this .csv file and add virtual machines to this list without having to touch my scripts.

  Thank you!

  Vince

  Hi Vince,.

  It is like that I think because of your statement:

  foreach ($entry in $list) {$exclude = Get-VM-name $entry. Name} -> it
  $vms = get - Vm | where {$_.} Name - not $exclude - and (Get-View-Id $_.) {ID). Config.Tools.ToolsUpgradePolicy - eq 'manual'} | Select name
  $vms | Export-Csv "C:\VMware\PowerCLI\Scripts\REPORTS\vmtools_upgradepolicy.csv" - NoTypeInformation
  }

  $exclude is a variable that contains only 1 entry., that's why you see only the last element inside. It will not be an array.

  foreach ($entry in $list) {[string []]+ $exclude = Get-VM-name $entry.} Name}

  This will fill $exclude table with entries of string that will contain the names of virtual machine.

  And when you will be comparing. I think you should use

  where {$exclude - notcontains $_.} Name - and... the rest

  Kind regards

  Greg

• Require a process step by step for the migration of virtual machines to new VMware ESX hypervisor

  Hello

  I'm looking for the method step by step for the migration of virtual machines to new host ESX Migration both cold and hot.

  Scenario - I have two data centers running ESX host stand-alone (with VM) in Europe. I need to build the new ESX host in new Dataceter to Singapore.

  Need prerequisites, the methods available for migrate VMWARE virtual has new host ESX (in the new data center) with minimum downtime.

  It will be great if you can enumerate the markets or redirect me to documentation that I can use to create detailed steps as the target host compatibility check on VMs and so on.

  Please advice

  Concerning

  AVI

  The steps are correct. The virtual machine must be turned off (step 3).

• Difference between the hosts and virtual machines

  Happy new year!

  I guess that's a stupid question, but I don't know the answer to it.

  I created pools from VM. Some jobs in the pool are hosts and some virtual machines. What is the difference between the hosts and virtual machines. I thought I could only create virtual machines, but I guess I could create hosts as well. -What happened?

  Thanks for your help.

  where does say desktops are hosts?  A host is usually referring to an ESXi server.  A virtual machine is just the guest OS running on the host computer.  A pool is a group of VMs that can extend over several hosts.

  Gunnar

• Can I access the guest from the server OS (virtual machine)?

  Hi all

  Can I access the guest from the server OS (virtual machine)? I mean, I would also like to start and discovers a guest OS (VM) directly in the server as in VMware Server 2.0. I would also like to see the graphic on the server management console to manage virtual machines.

  Or do I always have at least two computers? For example, the server ESXi without GUI / frontend access and the client with vCenter, vInfrastructure, blah-blah-blah,...?

  Thanks for the replies!

  Best regards

  Joao Araujo

  You will need the Client or another tool for access (RDP, SSH) a machine separate. ESXi is a very tiny BONES.

• looking for a script to the list of virtual machines by datastore

  Someone at - it a script that lists each data store, then the virtual machines that are on it. Or maybe the list all virtual machines and data store or data warehouses is located in the virtual machine?

  Thank you

  This should do the trick for you.  In fact, it extends the computer object complete virtual with a property data store so you can still search the other aspects of the virtual machine.

  Get-Datastore. WHERE-object {$_.} {Name - like "DMX *"} | {ForEach-Object

  $dsname = $_. Name

  $_ | Get - VM | {ForEach-Object

  $($_ | Add - Member MemberType NoteProperty-name of store data-value $dsname - PassThru) | Select-object Name, host, Datastore

  }

  }