Upgrade HP Dv6 6150us windows 8

Similar Questions

• Pavilion laptop g6 - Wifi problem after upgrade to 8.1 Windows

  KIM

  I have a Pavilion Notebook - C3M29EA #AB7 g6 and upgraded to 8.1 windows yesterday.

  Since then, I was unable to detect my own wifi connection while I am able to detect my neighbours. (Everything worked fine before the update).

  Any suggestions?

  -Same here.

  After an hour of time I will ever come back that I solved the problem.

  (1) go on the internet via the wired LAN port

  2) update drivers for Ralink wifi adapter

  Go: Right click on the wireless network connection icon: properties/Configure/tab Driverr/update driver

  (3) after a minute or two of updateing the PC reports that the driver has been updated

  (4) pull the network cable and turn on WiFi.

  What a pain in the anus,

  Anyway, as I said, corrected!

  Dansda.

• For HP ENVY dv6-7213nr Windows 7 USB controller

  Recently, I've killed my HP dv6-7213nr Windows 8.1 want to Windows 7 Professional.

  I tracked most of the drivers for it in various sites, but I still need USB controllers for her. The closest to the power cord works, but that's all.

  It's a USB 2.0 controller.  I looked everywhere I know online and found nothing on this subject.  Any help?  I have seen a lot of post on the decommissioning and the difficulties in finding different drivers, it's a pain.

  Thanks for any help in advance!

  Hardware IDS are as follows:

  PCI\VEN_1022 & DEV_7812 & SUBSYS_182D103C & REV_03
  PCI\VEN_1022 & DEV_7812 & SUBSYS_182D103C
  PCI\VEN_1022 & DEV_7812 & CC_0C0330
  PCI\VEN_1022 & DEV_7812 & CC_0C03

  USB 2.0 is supported by native drivers included in Windows 7. The hardware ID 'PCI\VEN_1022 & DEV_7812 & CC_0C03' you provide is an AMD USB 3.0 controller. Please try the Drivers of the Chipset AMD (USB 3.0, AHCI and Chipset) from AMD. The first driver is for Vista, 7 and 8.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• I am considering upgrading my laptop for Windows 8. What can I expect if I do this?

  You may want to consider upgrading your laptop for Windows 8, but don't know what to expect or if it is compatible or not.

  If you are in this category, then you will find this site useful.

  It will give an idea of what to expect with possible isuses and a link to a tool for verification of compatibility at the bottom.

  Blink on following: HP has tested my computer with Windows 8? at the bottom of the site and enter your product number.  This will tell if the system has been tested for Windows 8, and if he can or can not get updates driver and software Windows 8.

  I hope that the site will help those who are considering upgrading to Windows 8.

• No Bluetooth after upgrade to 8.1 Windows - model 1104TX (ENVY m6)

  Hello

  My system is HP Envy m6 1104tx. It came with Windows 8 (64-bit) preinstalled and everything was going well until I chose to upgrade to 8.1 Windows.

  After checking with CompMgmt.msc, I found that I had 3290 RaLink 802.11 Wi - Fi adapter. Just below NICs, I have "Other devices" and under "Bluetooth Controller" with a yellow exclamation mark on the subject. I tried to update the drivers, but it says "Windows failed to install the controller bluetooth"(pas pu trouver pilote logiciel pour votre périphérique). "»

  I've updated almost all possible device drivers, but this 'Bluetooth controller' still shows a yellow exclamation mark on it.

  Also in CompMgmt.msc I can't find "Bluetooth" or "Bluetooth Module" but on the contrary, there is a 'profiles Bluetooth device' and inside this 'Bluetooth Interface Driver profile '. I tried to update, but the result was still once, as mentioned above.

  So, how to solve this? How to make implementing Bluetooth on my m6 desire?

  PS And yes I ran Technical Assistance from HP, but it says everything is fine. And in reality it is not, Bluetooth does not.

  RENJ

  Thanks Makachaka,

  I really appreciate your time and your help. However your suggestion came a little too late.

  I had already solved my problem with Bluetooth using the instructions contained in the following web page:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/Bluetooth-systemthreadexceptionnothandled-blue/e9e410d4-ef73-40C2-9e4e-b05c5d604c6c?LC=2057&auth=1

  The gap only I took while troubleshooting from the procedure described in the page Microsoft above was that I didn't not apply the patch from Intel Bluetooth. The rest was exactly as described. Problem solved for me.

  @Makachaka: thanks and have a great year!

• upgrade WLAN dv6 - 3108st

  Hello

  I want to upgrade my dv6 - 3108st Ralink RT3090 wifi card. I want to change it with intel centrino calpella platform of the wifi cards (Ultimate-N 6300 AGN, Advanced-N + WiMAX 6250 AGN, Advanced-N 6200 AGN or Wireless-N 1000 BGN).

  Is all pcie half mini card compatible with my laptop?

  DV6 - 3108st

  The card that I want to buy

  Thank you

  Hello kalabalik,.

  Take a look at your maintenance and Service Guide Manual.  There compatible parts, parts numbers, etc. in the breast.

  You can buy the latter in HP Partsurfer.

  If I was helpful, or if you want to say thanks you can click the White Star under my name to give me congratulations.  I really appreciate it!

  Good luck!

• Lenovo Y400 HDD partition after upgrade to 8.1 WIndows

  I upgraded my Lenovo Y400 Windows 8.1, and I noticed that there are 8 partitions on disk 0. Is this normal?

  Otherwise, what partition I could merge/delete/resize without sacrificing the functionality of One (OKR) key recovery?

  

  I want to buy SSD in the near future (probably 128 GB) and want to use it as a system and my existing as data storage HARD drive. It is possible to clone my disk SSD with the always OKR works?

  Thank you very much!

  Here's the original scores, as seen in another way:

  

• creating recovery media after upgrade to 8.1 window

  Hello friends. I have a lot of confusion. I bought a laptop on December 2012 with window 8 preinstalled and created the recovery media about 6 or 7 months later. And now, I upgraded my system to window the window store 8.1. And now again I would create a recovery media for windows 8.1. So my question is if I create recovery media on a flash drive usb and if in the future I want to reset my pc or reinstall my system, I'll make window 8 or 8.1 on my system. I'm not a computer expert. If anyone can help me please. Thank you.

  Hello:

  You will get Windows 8.

  If you want to do a recovery W8.1 image you can do the following...

  You can create a system image in W8.1 and save it on a portable hard drive or set of DVD as you might in W7.

  Instead of making a bootable cd as in W7, you need a boot flash drive boot. You can use a flash drive to very small capacity (256 MB) for the startup recovery W8 flash player.

  Check out these links for more information.

  Create the image of the W8.1 system:

  http://www.hanselman.com/blog/CreateACompleteSystemImageBackupWithWindows81AndFileHistory.aspx

  Create bootable W8.1 flash player to access the system image.  Don't forget, you can use this drive, you can boot from it and access the system image you created on DVD or a portable USB hard drive.

  http://anewdomain.NET/2013/09/13/create-USB-recovery-drive-Windows-8-1/

• Cannot set UEFI after upgrade to 8.1 Windows (P6 HP 2364ea)

  Hello

  I recently bought a HP P6 (Pavilion) 2364ea tower that came with Windows 8 is installed. When buying I could enter the parameters of UEFI at startup by pressing one of the function keys. Now that I have upgraded to 8.1 Windows no splash screen or UEFI settings are available when booting - any function keys I type.

  I tried to reboot to the Windows Advanced Boot-> troubleshoot-> advanced options-> settings for UEFI firmware road but the PC starts just to a white screen with no hard disk activity. I then reboot into Windows 8. The same thing happens if I try to change the windows startup options.

  Any help would be greatly appreciated!

  Thank you

  Gary

  I have now managed to access the UEFI settings using an old VGA monitor to start instead of my screen thanks to a post of dave2009 on another thread. For anyone having the same problem here is his message:

  I hope it will work for you or someone else. I felt the same way - try to access the settings of the PC UEFI firmware and got a screen empty every time. Tried the ridiculous press F10 every second. Nada.

  Fortunately, I came across this post that put me on my solution. It's actually the BIOS could not display on my monitor (s).

  The BIOS has been there all along, but I didn't know it.

  My setup is a HP Envy with Intel HD graphics office built in connected with DVI to HDMI cables to 2 HP w2338h monitors that have a native resolution of 1920 x 1080 or more. Solution? Unplug everything and plug an older monitor CRT HP with a VGA to DVI. Seriously. My new HP desktop cannot display the HP BIOS on my HP flat screens. Now, I'm not going to dig into this but I suspect even just plug one of the flat screens equipped with a VGA connector could do the trick.

  And wa - la. My firmware is not corrupt. I need not do anything crazy. I just needed to downgrade my video connectors in order to see the bios. And, now that I have my graphics card inherited here, I see this cute bootscreen of HP. Previously, black until the windows open. It's a whole new world!

• I'm trying to install magic jack and keep to message to upgrade of the session windows-I've got ME and internet explore

  I'm trying to install magic jack and keep to message to upgrade of the session windows-I've got ME and internet explorer, what do I do?

  Windows Me is obsolete and is therefore your computer.  Consider the purchase of a modern computer.  Examples

• I did an upgrade from Vista to Windows 7 and when I trired to reboot, I get the check disk error

  I did an upgrade from Vista to Windows 7 and when I trired to reboot, I get the following message and there's like this. I tried to cancel the disk check with in 10 seconds by pressing a key, but it still is not.
  Message:
  "Checking file system on C:.
  The type of the file system is NTFS.
  One of your disks needs to be checked for consistency. You can cancel the disk check, but it is highly cool that you continue.
  To check the disk a press any in 10 second (s). »

  How your problem is related to Windows Update (compared to the Windows upgrade)?

  This post here instead, questions please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I am trying to upgrade my XP to Windows 7. I bought a licensed copy of Windows 7 with SP1 dvd but it's a udf file and I can not load.

  I am trying to upgrade my XP to Windows 7.  I bought a licensed copy of Windows 7 with SP1 dvd but it's a udf file and I can not load.  What should I do?

  Boot you from the DVD first? Or have you tried to open it in Windows Xp?

• Upgrade my XP to windows 8

  I was wondering if my Microsoft Windows XP Media Center Edition 2002 Service Pack 3 can support Windows 8?

  You are asking the wrong question (under two different aspects).

  First of all, the question is not to know if Windows XP can support another version of Windows, but if your hardware can support.

  Second, there is little interest in upgrading to Windows 8, even if you could.  Not only Windows 8 quite unpopular with most of the users who have tried, but Microsoft supports only Windows 8 for 3 years after the end of support for Windows 7.

  Go to the web site of the company that manufactured your computer and see if there is available for versions of Windows hardware drivers passed XP.  If this is not the case, there little interest in the pursuit of the questions (although it is possible that a newer version of Windows could operate).

  You can also download and run the Windows 8 Upgrade Assistant of--> http://windows.microsoft.com/en-us/windows-8/upgrade-assistant-download-online-faq

  As far as Windows is concerned 10, if your system can run Windows 8.1, it probably could also run Windows 10, but read this--> http://www.pcworld.com/article/2951112/hardware/can-your-old-pc-run-windows-10-the-answer-will-surprise-you.html and http://www.cnet.com/how-to/what-options-do-windows-xp-and-vista-users-have-in-a-windows-10-world/

  If I were you, I would buy a new computer or - if your computer manufacturer has drivers for Windows 7 - I would like to buy a copy of Windows 7 from Amazon.

• free upgrade path - XP to Windows 7

  Is there a way of free upgrade from XP to Windows 7 that Microsoft offers? kindly help.

  Hello

  No, currently there is no free upgrade to XP > 7. However, it is of course possible to XP > 7 in general.

  Before getting started, or before the upgrade, you'll want to go there and download the Windows 7 Upgrade Advisor - http://www.microsoft.com/en-us/download/details.aspx?id=20

  Essentially, what this software is that it scans your system / inserted to see if they will work properly with Windows 7. It also checks specifically your PC hardware to see if it meets the system requirements to install on your system.

  Once you know everything will run OK and to be consistent, you'll want to read this to see how to start the upgrade process real - http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-xp-to-windows-7#T1=tab01

  Kind regards

  Patrick

• Can HP Mini with Windows XP - I upgrade to a supported Windows version?

  I have a 210-1000 HP Mini with Windows XP Home Edition.  Given that XP is no longer supported, can I put the Mini version of Windows supported?

  Hi Runincary,

  To know if your PC is capable of running Windows, you can run Upgrade Wizard of the version of Windows that you want to update your PC to. Below, I've posted links to the wizards for the version of Windows that you want to update to upgrade.

  Note:  Windows Vista is always support however, sales have ended for this version of Windows.

  Windows 7 upgrade Assistant

  Windows 8 Upgrade Wizard

  Windows 8.1 Upgrade Wizard

  Hope that answers your question.