To access the internal settings of a block
Hi all
I use the LabVIEW FPGA 2015 for a project. I would like to access the internal got (data type, size, etc.) as the window scaling, FFT, blocks
or another block. Or even change the size of an external FIFO without having to open the game menu. Is this possible in LabVIEW?
Thanks in advance,
Hazem
You can right click... 'convert Subvi' to open the diagram and repeat for the inner screws.
This allows you to see the actual code. You may be able to recover fragments of code and use your own code.
Tags: NI Software
Similar Questions
-
I am trying to access the security settings in my Apple ID, but due to too many failed attempts to answer my questions of security, this option is blocked. How can I unlock it?
You can see this page if your identifier Apple is locked to see how to solve this problem.
https://support.Apple.com/en-us/HT204106
If you cannot solve this way, please contact support at the link below!
-
Can not access the security settings
Hello
I don't have a password on my computer since I don't don't need one. And in the past, I was able to enter the security settings and allow installation of non-apple software, leaving the field blank password and unlock the feature by pressing return.
I wonder now a password that I don't have, and if I had, I must have forgotten. I don't know what to do to get into the security settings.
Your help is greatly appreciated.
Faurie
Well - I found the answer to my own question.
It seems - so that you cannot use a password to connect to your computer, that when you want to deal with the security settings, the computer expects that you must have a password. In other words: you can not have a password.
I solved my problem by creating a password, then use it, and I was able to access the security settings and do what I had to.
Thanks to me.
-
I have windows XP - Pro and recently upgraded to Firefox 7.0.1 and OE I get errors from web sites on cookie settings. I can't access the cookie settings via the tab tools option and privacy, because there is no option of cookie except to erase or delete individual cookies. I could manage my cookies before but something has changed in this version of Firefox, and now it's playing a lot of features of my web site.
See all the parameters of the story and the cookie to use:
- Tools > Options > privacy > Firefox will be: "use the custom settings for history".
-
Connection impossible access area properties
When I click on properties in my tab of connection area I can't access the properties settings. I need to change the settings of ip address of my connection to the local network on my laptopHello fazlurslemming,
1. may I know why you must change the setting of IP address on your laptop?
2. are you able to connect to the internet?
3. what version of windows are you using?Visit the below link to find the steps to change the IP address on a windows 7 installed system:
http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings
Post back with the State. -
Jet J3310A direct: can not reach the internal settings
Hello
I have a laserjet 2100TN and a tot of J3110A direct jet connect with my network.
My goal is to change the IP address because I want to have a static address in the network. To do this, I try to open the page of the internal settings of the printer via the IP address of 192.168.0.106. All I get is a blank screen with only the button "help" and a link to HP.com. How can I change this?
I think that if. Administrator Web jet is used by very large network administrators to control all their printers to set up to make the update firmware massive, etc.. It is a very powerful program, and as it uses its own java interface will not be a problem.
-
How to access the advanced settings of the BIOS?
Hi I have a computer laptop sony vaio SVE14125CLB BIOS insydeH20 Rev 3.7
When you get into the BIOS I have just a few options and I need to access the advanced settings I know they exist but are locked somehow. How can I access them?
are there any special combination key?
It's really a pain for not having access to something you have paid...
Thank you
Hello
It is hidden so that changes cannot be made that could affect how it interacts with the computer and possibly cause a problem in the future. What type of problem are you having with your VAIO which requires to enter BIOS advanced settings? Thank you.
-
Cannot access the audio settings
Hey everybody. Today I plugged my headphones in and waited for chip connect disable audio clear more because it's hurting my ears with headphones... He didn't do it, I tried to turn off manually but I couldn't access the audio settings in the music app... He just wouldn't do anything when I clicked it, then he said this: https://www.dropbox.com/s/c7drv4nf6o0pydg/Screenshot_2015-09-22-13-34-25.png?dl=0 and when I go to settings, audio, audio settings, it still says the same thing... I need help, I restarted my phone like 5 times to no avail... And I checked the running applications, and there is nothing that would make this...
Thanks in advance
Hello raul, it seems that you have downloaded an app enchancing equalizer or sound that prevents you from using the audio settings by default. Please check the app and delete it and try again.
-
How to access the "Local Settings" folder in Vista.
Have an Adware bug stuck to the folder "Temporay Internet" McAfee can't remove it completely. In XP, you could access the local settings folder to manually delete the Temp and Temporary Internet files. I liked to do this because you have been assured that all deleted. But in Vista, all I get is access denied! And this applies to other as well protected system files. Is there a way to change the security settings for this folder?
Local Settings is a junction point : a hidden and protected operating system file that is not accessible to the user. He points to the folder accessible by the user
C:\Users\\AppData\Local
Have you tried to delete temporary Internet files in Internet Explorer? Click Tools > Internet Options > delete .
Boulder computer Maven
Most Microsoft Valuable Professional -
VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK
I tried to set up a simple customer vpn using this document
VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK BEHIND "RA"...
6.3 (5) PIX version
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the encrypted password of VmHKIhnF4Gs5AWk3
VmHKIhnF4Gs5AWk3 encrypted passwd
hostname VOIPLABPIX
domain voicelab.com
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list 101 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 101 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 102 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 102 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP address outside 208.x.x.11 255.255.255.0
IP address inside 172.10.2.2 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool voicelabpool 172.10.3.100 - 172.10.3.254
history of PDM activate
ARP timeout 14400
NAT (inside) - 0 102 access list
Route outside 0.0.0.0 0.0.0.0 208.x.x.11 1
Route inside 172.10.1.0 255.255.255.0 172.10.2.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 172.0.0.0 255.0.0.0 inside
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-aes-256 trmset1, esp-sha-hmac
Crypto-map dynamic map2 10 set transform-set trmset1
map map1 10 ipsec-isakmp crypto dynamic map2
client authentication card crypto LOCAL map1
map1 outside crypto map interface
ISAKMP allows outside
ISAKMP identity address
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 encryption aes-256
ISAKMP policy 10 sha hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
vpngroup address voicelabpool pool cuclab
vpngroup dns 204.x.x.10 Server cuclab
vpngroup cuclab by default-field voicelab.com
vpngroup split tunnel 101 cuclab
vpngroup idle 1800 cuclab-time
vpngroup password cuclab *.
Telnet timeout 5
SSH 208.x.x.11 255.255.255.255 outside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 172.10.1.2 255.255.255.255 inside
SSH timeout 60
Console timeout 0
username labadmin jNEF0yoDIDCsaoVQ encrypted password privilege 2
Terminal width 80
Cryptochecksum:b03a349e1ac9e6022432523bbb54504b
: end
Try to turn on NAT - T
PIX (config) #isakmp nat-traversal 20
http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1
HTH
-
Cisco ASA 5505 VPN L2TP cannot access the internal network
Hello
I'm trying to configure Cisco VPN L2TP to my office. After a successful login, I can't access the internal network.
Can you jhelp me to find the problem?
I have Cisco ASA:
within the network - 192.168.1.0
VPN - 192.168.168.0 network
I have the router to 192.168.1.2 and I cannot ping or access this router.
Here is my config:
ASA Version 8.4 (3)
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 198.X.X.A 255.255.255.248
!
passive FTP mode
permit same-security-traffic intra-interface
the net-all purpose network
subnet 0.0.0.0 0.0.0.0
network vpn_local object
192.168.168.0 subnet 255.255.255.0
network inside_nw object
subnet 192.168.1.0 255.255.255.0
outside_access_in list extended access permit icmp any any echo response
outside_access_in list extended access deny ip any any newspaper
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
IP local pool sales_addresses 192.168.168.1 - 192.168.168.254
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT dynamic interface of net-all source (indoor, outdoor)
NAT (inside, outside) source inside_nw destination inside_nw static static vpn_local vpn_local
NAT (exterior, Interior) source vpn_local destination vpn_local static static inside_nw inside_nw-route search
!
network vpn_local object
dynamic NAT interface (outdoors, outdoor)
network inside_nw object
NAT dynamic interface (indoor, outdoor)
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 198.X.X.B 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication enable LOCAL console
the ssh LOCAL console AAA authentication
AAA authentication http LOCAL console
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
IKEv1 crypto ipsec transform-set my-transform-set-ikev1 esp-3des esp-sha-hmac
transport in transform-set my-transform-set-ikev1 ikev1 crypto ipsec mode
Crypto-map Dynamics dyno 10 set transform-set my-transformation-set-ikev1 ikev1
card crypto 20-isakmp ipsec vpn Dynamics dyno
vpn outside crypto map interface
Crypto isakmp nat-traversal 3600
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH timeout 30
Console timeout 0
management-access inside
dhcpd address 192.168.1.5 - 192.168.1.132 inside
dhcpd dns 75.75.75.75 76.76.76.76 interface inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal sales_policy group policy
attributes of the strategy of group sales_policy
Server DNS 75.75.75.75 value 76.76.76.76
Protocol-tunnel-VPN l2tp ipsec
user name-
user name-
attributes global-tunnel-group DefaultRAGroup
address sales_addresses pool
Group Policy - by default-sales_policy
IPSec-attributes tunnel-group DefaultRAGroup
IKEv1 pre-shared-key *.
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authentication
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:5d1fc9409c87ecdc1e06f06980de6c13
: end
Thanks for your help.
You must test with 'real' traffic on 192.168.1.2 and if you use ping, you must add icmp-inspection:
Policy-map global_policy
class inspection_default
inspect the icmp
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni -
Username and password required to access the security settings
I have a HP5520e printer all in one. I'm putting it to scan to my computer. The instructions say I should activate Webscan from the administrator under settings and Security Options. When I try to access the settings of the administrator I wonder a user name and password. Should what username and password I enter here?
gnomad899,
Welcome to the HP Forum.
Start with the standard:
admin = admin
password = password (or leave the field blank)
This assumes, of course, you have not used EWS (built-in web server) and a password for her before - what you CAN do using the integrated Web server. Once you do not set a password using the EWS page, whenever you want to watch some settings, set some parameters, you must enter the password that you set up.
EWS is simply the webpage to the printer interface - as if you use a web page to talk to your router software. Same thing: sort of, except that you type in the IP of the printer on your browser instead of router, of course.
============================================================================
If it won't let you
You can try to reset the printer. Be aware that if you do this, you need to re enter all previously entered information (wireless settings, etc.).
You may be able to reset the printer on the front panel - settings > settings default (or similar).
OR
Troubleshooting > troubleshooting > printer keeps no connection Wi-Fi
Fourth step: reset the printer and wireless router and then restart the computerFollow these steps to reset your printer and your wireless router, and then restart your computer.
-
Cannot access the bluetooth settings or find devices
I can access the bluetooth software. but when I click on settings or find devices, nothing appears. also when I go to programs it does not appear on the list. I have the icon on my computer, but it does not. I just want to plug my mouse and my mobile phone, possibly if I can make it work. Please help ASAP
Hello
read these tutorials on how to set up bluetooth
http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device
Here are solutions to some common problems with Bluetooth devices.
You can also try a convenience store for diagnose and fix common problems with equipment and devices running.
If the above does not correct it contact the hardware manufacturer
-
How to access the internal memory of Blackberry?
Hello
I am currently to access the file operation in the SD card. I want to access the file operation in the internal memory of Blackberry?To access the file on the internal memory operation use file:///store/home/user/filename
-
Cannot access the internal network with Cisco easy vpn client RV320
I have a cisco RV320 (firmware v1.1.1.06) and created a tunnel easy vpn (= split tunnel tunnel mode), then I installed the cisco client vpn v5.0.07.0290 in Windows 7 64 bit, I can connect to the vpn, but I do not see the other pc ping nor them, no idea?
Thank you
Hello
1. is the firewall on the active Windows 7 computer? If so, please disable it
2. can you check that you get a correct IP address in the range of the POOL of IP configured?
3. When you perform the tracert command to access an internal server, it crosses the VPN¨?
4. is the tunnel of split giving you access to internal IP subnets defined?
5. on the RV320 you see the user connected and sending and receiving bytes?
Don t forget to rate and score as correct the helpful post!
David Castro,
Kind regards
Maybe you are looking for
-
What is good for Satellite L300 recovery CD?
I recently bought "Toshiba Satellite L300" which had the Windows 7 operating system, but the recovery CD was Windows XP.And my hard drive was the only partition and Microsoft office was not working on this laptop and I used this CD to solve these pro
-
Qosmio X 305-how do to disable the touchpad when typing in Vista?
There is a way in XP to put the key then typing an accidental shot of my sleeve did not send words entered in another place.I can't find a way to do this for my nice new Qosmio X 305 running Vista. Does anyone know how this can be done?I do not neces
-
How to recover iPhotos videos?
OK, so I'm moving all my photos and videos about iPhoto... I selected all the photos and videos in a folder and is an export to a new folder on my desktop... Great so far... all original images are exported, BUT videos are just what seems like place
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem
-
Someone took over my account has sent a message to scam and I can't.
I can't on my email account. This morning someone sent and send to my contacts, saying that I was in Scotland and needing money. Please notify. I would like to transfer my info and close this page if possible. I started the account around 1996 and do