Definition of the surface of the mushroom side in FrameMaker 2015

Similar Questions

• Determine the cost of installing FrameMaker 2015

  
  Our company is spending the structured Word to FrameMaker 2015. I need to understand the process and the costs associated with hiring a company to install FrameMaker 2015 and convert 250 Word in 2015 of FrameMaker documents. I'm new to FrameMaker and I know that I'm not aware of what the process is, what precautions should I take, I should be informed to make the transition as easy as possible, information and how to assess the costs. I tried a number of Web sites, but can't seem to find a basic guide to hiring another company set up FrameMaker 2015. Any ideas on the resources that I could use?

  Thank you.

  Hello

  This is no a trivial task, your workflow can change a lot.

  There is a lot of companies out there that do exactly what you ask. If you are D-A-CH, I salute a few guys for you, that perfectly match your needs.

  Question is always: how much time and money you want to throw at it. If your company does not have to spend a lot of money, they need to spend a lot of time (Yes we know, it is also - money but good, it is an internal resource). You can perfectly acquire all the necessary knowledge for yourself and do the work without outside help. But it takes time - a lot.

  If you go this route (and you should be at a certain point), everyone here will gladly help you.

  But from scratch with no sample and no knowledge base is quite hard and painful.

  My personal opinion is that you should have a working process, proper training and start and then to dive more deeply into the case.

  This will allow you to save a lot of expense, time and frustration later.

  -Alex cheers

• How to overcome the problem of initialization of installation with the trial version of FrameMaker 2015?

  FrameMaker 2015 test installation: installer stops, saying: he is unable to initialize and pointing me on Adobe Support Advisor, a tool that apparently abandoned. I get the error message in my (German) language regardless of the language version of the trial, I downloaded. My computer Win7Pro had FM8 installed, but it now requires me to register again, that breaks down.

  Awesome. I'm glad that this problem could be solved. AchmedMUC, that would be great, if you could mark the Ajit answer "Right answer", so that this thread is marked as closed / resolved.

  Thank you :-)

• OfficeJet 8610: OfficeJet 8610 when you copy in duplex, one side to the other side

  When I try to copy multi-page documents, goes to 1 side 2 sides, one side is upside down. This works when the pages are in portrait setup but not when they are in the configuration of the landscape.

  It's COPY, not print, so I can't follow the advice to replace the flip setting. There seems not to be a setting on the printer itself to change that.

  I did a chat session with HP, but the problem was not resolved. I got a call a supervisor (level 2, no doubt), but I have not worked with them again.

  The printer is connected wireless. I run the installation wizard and the Finder solution and the update as well as the doctor of printing and scanning without result.

  Any ideas?

  Hi @Tiggy626A,

  I see you are having problems copying 2 sides in landscape mode. I will definitely do my best to help you.

  From the front panel of the printer, you can bind only on the long side, there is no option to change the copy to the short edge. I tried to copy 2 faces on our Officejet 8610 laboratory, one side released head downstairs. By experimenting, I found a solution, by loading the two documents to copy in the ADF file, load the other down. This will allow the copy two facing the landscape properly the printer. I know that's not very practical, but it worked out this way.

  This feature is available if you choose to scan documents and then print as a 2-sided document with a link on the edge short.

  Here is a document for the HP Officejet Pro printers 8610 - copying Documents.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Definition of the word "Rootkit".

  (Sorry if this is the wrong subject, but at least it includes the definition of the word ;-)
  There are two competing definitions of the word; Rootkit

  The first is:
  -ROOTKIT = 1: "hide", 2nd: 'malicious', performs actions harmful to the network, system or users. He must do the 1st and the 2nd is assumed.
  (In this definition of the first part, root means something that lies under the surface.)
  The second is:
  -ROOTKIT = software that includes privileged code, using the resources of protected system and functions. The term dates with Unix System Utilities that provided functions not in the operating system. The current use is for the privileged of the legitimate software and malware who wins and who uses privileges through unauthorized means.
  (In this definition of the first part, root means the privileged or administrative account on a Unix system).

  People who work with or for one of the organizations AV utility, use the second. They generally speak of a detection of rootkits to change system made by a valid software as a legitimate Rootkit and a false positive detection. So they specifically differentiate legitimate Rootkits and malicious Rootkits. All the utilities Virus definitions include a legitimate list of these Rootkits to eliminate false positive detections.

  It would seem that the demarcation line may be IS professional and 'lay '. But the document Microsoft, Understanding Anti-Malware Technologies, seems to be using the first definition. If address to business people, but the wait is it was written by a professional.

  Is there a principal security analyst at Microsoft, who might have real experience at the origin of this word. (No kiddies offense, but are looking for some who actually fought in the 'little Indian-Big Indian war').

  (Note: Rootkit is always indicated as badly spelled, if developers of Office have not yet added to their 'words' dictionary)

  So you don't think it might help to post if you are looking for people with experience Unix in Unix forums instead of Microsoft forums?

  The thread may be in another part of the whole of the site answers Forums, but you are always in the wrong place.

  To use an analogy, you go to the forum of plumber to request information on how the Electrical Code are 120 and 240 circuits in homes rather than ask the electrician forum.  Maybe some electical plumber also works and may know, but are not significantly higher chances of success asking a group of electricians instead?

• 1/4 of my screen on the right side and about an inch on the bottom is black?

  OK, I have a laptop of hp g50, fr963ua #aba... I had takin did a full restore of the system back to factory settings and since then 1/4 of the screen of the monitors on the right side and and your thumb on the bottom is black but still light... its afficherdans as a full screen when I have a wide screen I tried update driver and cannot figure out and its still displayed as 1024 x 768 60 hz... any help will be appreciated...

  Hello

  Welcome to the HP Forum!

  alxstin6 wrote:

  OK, I have a laptop of hp g50, fr963ua #aba... I had takin did a full restore of the system back to factory settings and since then 1/4 of the screen of the monitors on the right side and and your thumb on the bottom is black but still light... its afficherdans as a full screen when I have a wide screen I tried update driver and cannot figure out and its still displayed as 1024 x 768 60 hz... any help will be appreciated...

  Right-click in a useful surface of the screen, then select the screen resolution. In the resolution drop-down list change resolution one that says (recommended). This will be the native screen resolution of your computer screen laptop graphics solution nd.  Once you have done that select apply and then OK.

  Best regards
  ERICO

• How can I delete the column ad on the right side of the screen

  Hi Pete,.

  Forgive my ignorance, if my response is inadequate.  I use ' windows 7 'firefox' is my browser. This announcement. column is definitely in what I printed. I fills the right side of my screen.  The ads change but never disappear.  It is not a "pop-up" really frustrating.

  [Original title: Leo]

  LB

  If you mean by column ad in your e-mail (Hotmail/outlook.com), they are how MS is helping to defray the cost of the free system.  You can get rid of them by updating to version "without publicity", but if you the problem is only with printing, I suspect that you are (once again if it is Hotmail or outlook.com) print function uses is not the three suspension points (...), but rather by using the browsers.

  1. go to your Inbox

  2. Select the desired message you want to print

  Please select the three dots (...) next to categories

  4. click on print

  5. a preview of the message is displayed and also printing options. (don't forget to click on "all pages" for multi page email.)

  Just click print.

  Dyami & Wanikiya
  The zig - zag team

• "Initial Moveto in the definition of the missing path" is displayed on the console

  Hello-
  
  I have an AreaChart using by default, all styles... nothing is done on my side with respect to css styles.
  
  I see this message on the console
  
  "Initial Moveto missing in the definition of the path. "[Path: Path@fe315d[styleClass=chart-series-area-fill series0 by missing color0]."
  
  -What it means and how to fix it?
  
  Here is the code that you can run to see the message on the output...
  
  
  import java.util.concurrent.ConcurrentLinkedQueue;
  import java.util.concurrent.ExecutorService;
  import java.util.concurrent.Executors;
  import java.util.logging.Level;
  to import java.util.logging.Logger;
  Import javafx.animation.AnimationTimer;
  Import javafx.animation.Timeline;
  Import javafx.application.Application;
  Import javafx.scene.Scene;
  Import javafx.scene.chart.AreaChart;
  Import javafx.scene.chart.NumberAxis;
  Import javafx.scene.chart.XYChart.Data;
  Import javafx.scene.chart.XYChart.Series;
  Import javafx.stage.Stage;
  
  /**
  * A table that fills the space between the line of data points and axes.
  * Good to compare the totals accumulated over time.
  *
  * @see javafx.scene.chart.Chart
  * @see javafx.scene.chart.Axis
  * @see javafx.scene.chart.NumberAxis
  * @related graphics/line/LineChart
  * @related graphics/clouds of points/ScatterChart
  */
  SerializableAttribute public class AreaChartSample extends Application {}
  private static final int MAX_DATA_POINTS = 50;
  
  series privacy;
  private int xSeriesData = 0;
  private ConcurrentLinkedQueue < number > dataQ = new ConcurrentLinkedQueue < number > ();
  ExecutorService executor private;
  Private AddToQueue addToQueue;
  timeline2 private chronology;
  private NumberAxis xAxis;
  
  {} private void init (primaryStage stage)
  xAxis = new NumberAxis(0,MAX_DATA_POINTS,MAX_DATA_POINTS/10);
  xAxis.setForceZeroInRange (false);
  xAxis.setAutoRanging (false);
  
  NumberAxis yAxis = new NumberAxis();
  yAxis.setAutoRanging (true);
  
  -Table
  final AreaChart < number >, sc = new AreaChart <, number >(xAxis, yAxis) {}
  Replace to remove the symbols on each data point
  @Override protected void dataItemAdded (int itemIndex, < number >, series, data element < number >,) {}
  };
  sc.setAnimated (false);
  sc.setId ("liveAreaChart");
  sc.setTitle ("graphic animation in areas");
  
  -Series of cards
  series = new AreaChart.Series < number >, ();
  series.setName ("graphic box series");
  sc.getData () .add (series);
  
  primaryStage.setScene (new Scene (sc));
  }
  
  @Override public void start (point primaryStage) throws Exception {}
  init (primaryStage);
  primaryStage.show ();
  
  -Services of executor to prepare
  the executor = Executors.newCachedThreadPool ();
  addToQueue = new AddToQueue();
  Executor.Execute (addToQueue);
  -Prepare the timeline
  prepareTimeline();
  }
  
  Public Shared Sub main (String [] args) {}
  Launch (args);
  }
  
  private class AddToQueue implements Runnable {}
  public void run() {}
  try {}
  Add a piece of random data to the queue
  dataQ.add (Math.random ());
  Thread.Sleep (50);
  Executor.Execute (this);
  } catch (InterruptedException ex) {}
  Logger.getLogger (AreaChartSample.class.getName ()) .log (Level.SEVERE, null, ex);
  }
  }
  }
  
  -Timeline is called in the main thread of JavaFX
  private void prepareTimeline() {}
  All images take all data in queue and add it to the chart
  new AnimationTimer() {}
  @Override public void handle (long) {}
  addDataToSeries();
  }
  }. start();
  }
  
  private void addDataToSeries() {}
  for (int i = 0; I < 20; i ++) {/ /-add 20 numbers to plot +}
  If (dataQ.isEmpty ()) break;
  series.getData () .add (new AreaChart.Data (xSeriesData ++, dataQ.remove ()));
  }
  Remove points to keep us not more than MAX_DATA_POINTS
  If (series.getData () () .size > MAX_DATA_POINTS) {}
  series.getData () .remove (0, series.getData () .size () - MAX_DATA_POINTS);
  }
  Update
  xAxis.setLowerBound(xSeriesData-MAX_DATA_POINTS);
  xAxis.setUpperBound(xSeriesData-1);
  }
  }

  I just test this code and let it run for one minute. I've not seen this kind of message - I use JavaFX 2.2 b 13 - it may have already been fixed.

• Retain the selected items on the right side of the shuttle in cascade

  Hello
  
  I'm under Apex 4.0.2 and have a cascading shuttle point so that a user can filter the left side of the shuttle using the text field.
  
  However when filter it - the shuttle seems to lose the items already selected on the right side.
  
  How can I change the element of the shuttle so that the user can always see the selected items, and the filter only works the unselected points (left side)?
  
  Thank you
  Keith

  Hi Keith,

  I don't have a blog, so there is no post. However, this is what I did:

  1 set the P298_FILTER element to 'Submit when you press enter' and added a branch to the page that redirected to the same page

  2. make the following settings for the P298_SHUTTLE element:

  Cascading LOV Parent article (s): P298_FILTER
  Page items to submit: P298_SHUTTLE
  List of values definition:

  SELECT ENAME d, EMPNO r
  FROM EMP
  WHERE UPPER(ENAME) LIKE UPPER(:P298_FILTER) || '%'
  OR '%' || :P298_SHUTTLE || '%' LIKE '%:' || EMPNO || ':%'
  ORDER BY UPPER(ENAME)
  

  and that is it really. The WHERE clause filters the record based on a filter match or a match with the existing items from the shuttle

  Andy

• BulletList in Arabic-&gt; balls on the right side?

  Hi, I am struggling with a translated file I have to insert in my Indesign, it is 'simplified Arabic'... at least, I assume it is, because that's what we call the police everything is fine, but there is a paragraph that is so annoying, this is a small list of bullets and is the problem for me, bullets need to go on the right side!

  In MS Word (it's how I got the text), it shows well, although a paragraph at least (I planned to make a pdf from word and import, but the output PDF from Word is good, is not ideal to say the least)

  Anyway, my question is... How can I put the balls on the right side of the text?

  (I use InDesign CS5)

  Thanks for any help!

  Screenshots:

  That's what I want (screenshot of the word)

  

  That's what I got when I import the above (InDesign)

  

  The $99 version would work for you since you are Arab and no need to support CJK. I'm a little surprised, that Joel has not pushed his head here to tell you that if you do not read Arabic you should not be playing with the definition of the type. You can save the text as a PDF from Word and palce as a graphic instead.

  Well, it is impossible for someone who is not literate to make look it good, but at least we can help make it readable to the original poster.

  Anyway, my question is... How can I put the balls on the right side of the text?

  The script that you used looks like a very bad idea to me. It defines the default fonts to "Batang", which is a Korean police...? In addition, I am not a genius script, I work at a snail's pace, but it is obvious that the script is planned for CS4, which perhaps explains why it hangs on.

  However, it is irrelevant in the long run because if you need your balls to have a hanging indent, there is no way to make a negative withdrawal without InDesign me or tools of world. You can therefore thus abandon and print to PDF & which place. Or a dirty hack: print to PDF, EPS to PDF export, open the EPS file in Illustrator with settings to force the font to describe and then copy & paste Arabic described in InDesign. And then, having your translator proof your job - this step is not optional. If you can not say that your second screenshot is completely unreadable and why, then you entrust must the formatting of this translation to someone who is literate in Arabic, or the less familiar enough with the script to see that the real problem in your screenshot is not bullets.

• Does anyone know how to turn off this setting when your phone is at a certain angle turns on without you pressing the button side feed or House? Please if you know tell me!

  Does anyone know how to turn off this setting when your phone is at a certain angle turns on without you pressing the button side feed or House? Please if you know tell me!

  Settings > display and brightness > raise to Wake

• Lump on the right side of my keyboard?

  Lump on the right side of my keyboard?

  See about getting the appointment of Genius on Apple store. If no official store location

  See having an authorized Apple service provider to inspect the battery for

  If she has inflated. They can inflate and assign keyboard & mouse. The battery

  In addition can also leak and be of serious consequence. An Apple store may be

  able to replace the battery if the device is not too old; they could inspect and advise you.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider

  A repair of iFixit guide can show how difficult the withdrawal (and reinstall) of the

  MacBook Air battery may be in their online Guides. If you see the correct guide

  for your model, they can also show the part number of the battery replacement.

  • MacBook Air repair guides - iFixit:

  https://www.iFixit.com/device/MacBook_Air

  There are two sets of guidance: 11 inches + 13 inches (in each, other models).

  Good luck and good hike!

• How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  See if this application works for you > https://itunes.apple.com/us/app/image-size/id670766542?mt=8

• Can't find the search box of google on the right side of the toolbar. He disappeared and I can't find out how to reinstall

  Have studied all the proposals help from firefox without success. Google search box on the right side of the toolbar of the web browser disappeared and can not figure out how to reinstall.

  You can't find it when you click on the Menu button top-right, then on 'Customize' below?

• I wish to see my email address on the right side of the screen, I have emails on the left and I want the email to display on the right side.

  When I looked at my emails on the left hand of the screen; the e-mail message open on the right side of the screen. Somehow I turned off
  the tab and now when I click on the email address I have to go to another screen to read e-mail. How can I fix it?

  We need a little clarity on what "E-mail" means.

  Accounts?
  Messages?
  The addresses?

  Tools | Options | Advanced | Read and display allows you to choose between a message of openness in:

  1. a tab;
  2. its own window;
  3. an existing window.

  Also, go to view. Layout and choose between three available patterns. You can also the Folders pane (on this same submenu) checked for your visible accountability in a pane on the left.

  The above assumes you will see a menu. If you can not, press and hold the < alt > key to make it appear temporarily.