Example of c# dot Net Module adapter

Similar Questions

• Module adaptation NOR - 6581 FlexRIO - Can one single port of IO have a few lines of channel defined as inputs and some defined as outputs?

  Hello

  I use a 6581 with 7965R FlexRIO FPGA module adaptation module. E/s/Port CLIP Module allows to configure a port as an input or output, but I would first of all a line of a port as an exit channel and the remaining lines of seven channels as inputs, it is possible to do?

  Thank you

  Maurice.

  Hello Maurice.

  The 6581 adaptation module can only change direction based on port (not on a basis of individual line).  This can be seen in the specs here.  There are other modules of digital adapter that support by the steering control of channels such as the NOR 6583.  The NI 6583 35 single ended e/s and the input/output LVDS (or mLVDS).

  Kind regards

• Container of DOT NET when relocating FP opening of secondary

  Hello all,.

  In my application, I wanted to load a VI that contains LabVIEW and Dot NET controls in a secondary and clicking on a button (say out), I have to remove the secondary and to open the Panel before the VI which was shown which was loaded in the secondary. But when I do that the containers Dot NET gets moved. I don't understand why this is happening. Please give your suggestions about this behavior and is it possible to fix this.

  PS: I have attached pictures so that the sample project explaining this behavior

  Thanks in advance,

  Sree.

  I did a lot of work with containers of .net and is not ONLY unique to the sub-panels.  I think that the problems come from the origin of the windows and scrollbars and dispatchers can affect the offset of a .net object as well.  A few ideas to help are to eliminate the scroll bars in the secondary, if you don't display them when it is inserted in the secondary, to avoid changes to the scroll bar.

  If it's not working for you, you're just programmatically to set the position of the .net container in your secondary, with an event, or remotely with VI server once it gets attached to ensure that it is in the right position.  Lot of ways sof to fix it, unfortunately they are all manual.

  It can also help position 0,0 .net containers (origin) so more easily control the movement and positioning.

  Hope it helps you to find a solution.

• Dot net Frame work 2.0 SP2 and 3.5 Sp1 failed with error 0 x 80070643

  Can you please help me out with the solution for Dot net Frame work 2.0 SP2 and 3.5 Sp1 failures that occur frequently.

  We tried with the dotnet uninstall and update with the last, but still the questions are on the same machine when we have updated with the latest patches released from Microsoft.we use WSUS 3.0 to update patches from microsoft in desktop computers

  Error code : Installation failure: Windows failed to install the following update with error 0 x 80070643:

  Please help with a permanent solution.

  http://support.Microsoft.com/kb/976982

• Family and dot net framework 3.5 sp1 update Setup error

  Hi all

  my system is windows vista 32 bit sp1.whenever I use windows update to install
  IMP updates dot net framework 3.5 sp1 and update family gives x error 0643.
  After crossing the suggestion given for this error to microsoft, I tried to
  manually install, but it gives error with desc set. and connect you as below. Help, please:

  Description:
  Microsoft .NET Framework 3.5 SP1 has encountered a problem during installation.  Setup did not complete successfully.

  Signature of the problem:
  Problem event name: VisualStudio8Setup
  Signature of the 01:35101 problem
  Signature of the problem 02: 3.5.30729.01_ORCAS_X86_NET
  Signature of the problem 03: CBS
  Signature of the problem 04: INST
  Signature of the problem 05: F
  Signature of the problem 06: gencomp750, {61040379-156d-4ece-b126-ea395a3b2
  Signature of the problem 07: BASERET_UNKNOWN
  Signature of the 08 problem: -.
  Signature of the 09 :-2145124330 problem
  Signature of the problem 10: WUSA
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  LCID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Error log:
  [06/23/12, 23: 57:04] Microsoft .NET Framework 2.0SP1 (CBS): [2] Failed to fetch of installation file in CBaseComponent::PreInstall()
  [06/23/12, 23: 57:04] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InternalInstallManager() with HRESULT-2147467260.
  [06/23/12, 23: 57:04] setup.exe: CSetupManager::RunInstallPhase() [2] - call to install/Pre/Post for InstallComponents failed
  [06/23/12, 23: 57:04] setup.exe: [2] CSetupManager::RunInstallPhaseAndCheckResults() - RunInstallPhase() returns a NULL piActionResults value
  [06/23/12, 23: 57:04] setup.exe: [2] CSetupManager::RunInstallFromList() - RunInstallPhaseAndCheckResults failed [2]
  [06/23/12, 23: 57:05] setup.exe: [2] ISetupManager::RunInstallLists (IP_PREINSTALL failed in ISetupManager::RunInstallFromThread()
  [06/23/12, 23: 57:05] setup.exe: ISetupManager::RunInstallFromThread() [2] failed in ISetupManager::RunInstall()
  [06/23/12, 23: 57:05] setup.exe: CSetupManager::Run() [2] - call to RunInstall() failed
  [06/23/12, 23: 57:05] WapUI: DepCheck [2] indicates Microsoft .NET Framework 2.0SP1 (CBS) is not installed.
  [06/23/12, 23: 57:05] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.0SP1 (CBS) was not attempted to be installed.
  [06/23/12, 23: 57:05] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' was not attempted to be installed.
  [06/24/12, 00:23:55] Microsoft .NET Framework 2.0SP1 (CBS): [2] error: Installation for the Microsoft .NET Framework 2.0SP1 (CBS) component failure. MSI returned error-2145124330 code
  [06/24/12, 00:24:11] WapUI: DepCheck [2] indicates Microsoft .NET Framework 2.0SP1 (CBS) is not installed.

  In fact, I have recovery error CTOERROR.flg while installing windows dvd recovery discs and the fix - it asks to restart windows that if I do it asks me to reinstall windows bcz higher error.

  I am manually installingb through the planned introduction in the link that you shared... when I got the above error...

  Have you checked for hard drive failure?

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=bph05701&product=12455#N173

  Re: ctoerror.flg

  Incomplete recovery

  One solution was to remove all xxxx and repartition the hard disk

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/dv4-models-recovery-incomplete-failure-duplicable-problem/m-p/173139

  Order a DVD of Windows Vista SP2

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

• Dot Net framewrk unhandled exception - cannot anchor balloon

  During the connection, after a few minutes, a Dot Net framework exception occurs indicating that he cannot anchor a balloon to the place = 1215 X, Y = 913.  The window says click on continue and the attempt of wll application to ignore the error, click on exit, the application closes immediately.

  I would like to solve what is the cause, because it really seems to slow down the PC.

  Click details and look for the name of the application and remove with the Panel of control-> programs and offers "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How to install dot net framework 3.5 without an internet connection in Windows 8 Professional 64-bit

  Please help I am having the problem to install dot net framework 3.5 in my PC. I do not have a fast internet connection s I can't download it from the internet. Please help me by using DISM was also flop because it showed me that an error always comes after 68.5% completion...

  Please help me I have a lot of problems because many things are not working due to net framework 3.5...

  .NET framework is already included in Windows 8.

  Enable (turn on or off features) Windows 8 Net Framework 3.5 (included .NET 2.0 and 3.0)

  http://blogs.technet.com/b/Aviraj/archive/2012/08/04/Windows-8-enable-NET-Framework-3-5-includes-NET-2-0-and-3-0-i-e-NetFx3-feature-in-online-amp-offline-mode.aspx

  J W Stuart: http://www.pagestart.com

• SURFACE-CANNOT INSTALL DOT NET FRAMEWORK 3.5

  I AM TRYING TO INSTALL DOT NET FRAMEWORK 3.5 FROM THE WINDOWS I PROPOSE KEEP 0X800F081F ERROR.  I TRIED EVERYTHING ONLINE, AND NOTHING WORKS.

  Hi Cheryl,

  For you help I would be grateful if you could answer the following questions:

  (1) have you made any changes to the computer before the show?

  (2) what measures you have profiled to solve the problem?

  There is an article in the Microsoft Knowledge Base, which provides methods to solve this problem. I suggest go you to the link to fix the problem.

  You have performed the steps in this article?

  If not, I suggest you to follow the steps in troubleshooting section and check,

  Error codes when you try to install the .NET Framework 3.5 in Windows 8 or Windows Server 2012

  http://support.Microsoft.com/kb/2734782

  You can also check this link for more information:

  Installation of .NET Framework 3.5 on Windows 8

  http://msdn.Microsoft.com/en-us/library/hh506443.aspx

  If you need help with Windows, please let us know we will be happy to help you.

• Using dot net 3.5 in windows 8 pro

  How can I use dot net 3.5 in windows 8 pro please suggest

  See:

  How to install .NET Framework 3.5 in Windows 8 or 8.1?

• Is the request failed in dot net (Foglight) applications

  Hi all

  -I can see column APPEARANCE with values "APPLICATION HONOR" in the dot NET request page (please see screenshots). I just wanted to know the reason. Appreciate a response, please let me know if this is a problem of configuration and what could be the resolution for this.

  

  

  Hello

  Looks like the problem is that "an insufficient number of arguments were provided for the procedure or function HCINMYSR_mkt.dbo.uf_Get_Target_Discount. Take a look in the HCINMYSR_mkt database for the code "uf_Get_Target_Discount". Seems to me that 5 parameters are passed to this - that is what she wants?

  Kind regards

  Darren

• Compliabiality of DOT NET graphical Interfaces (GUI) with Java

  Hello
  Right now, I'm about to start the GUI in Java learning.
  I have gained all the basic knowledge of Java enough to learn GUI.
  
  My Questions are:
  (1) in a first time learning Java GUI, is it really necessary to learn AWT before learning Java Swing framework?
  
  (2) I heard that VISUAL STUDIO of Dot Net Framework supports advanced of GUI facilities and rich watch that we use to build graphic interfaces that must operate in Java Applications, so that Java Gui done, can the .net GUI library classes?
  
  Also is this really true?

  Tejaswi.B wrote:
  .. is it really necessary to learn AWT before learning Java Swing framework?

  No, but noted there are many (no) components of AWT that could be used in Swing interfaces. Fonts, sizes, layouts...

  This being said, follow the link provided Darryl and you will find the tutorial covers these classes (or almost) as if they were Swing.

  (2) I heard that VISUAL STUDIO of Dot Net Framework supports advanced GUI facilities and rich look than that of Java Gui...

  Where did you hear that?

  As far as I understand, there are a few components provided in .NET that are not in the swing, such as (I don't know how it's called) a "list of switch" where there are two lists side by side with buttons to move items from one list to the other. These components are possible from other components in the swing. I guess that Swing developers felt that these components were rarely required to justify the addition of a specific component for them.

  You can also go on SwingX (https://swingx.dev.java.net/), which is based on the swing to provide additional components.

• ConverterStorageParamsVolumeCloningParams syntax in dot net

  Hi, I need to use the sdk to create a p2v of a physical machine but only cloning the c: volume work, so I used the sample net dot, which is done for vs 2005 with visual c# 2005.

  So I added this code:

  ConverterStorageParams converterStorageParams = new ConverterStorageParams();
  converterStorageParams.cloningMode = "volumeBasedCloning";
  ConverterComputerSpec computerSpec = new ConverterComputerSpec();
  computerSpec.location = Common.BuildLiveSourceLocation (_sourceName, _sourceUsername, _sourcePassword,
  _sourceOsType, false, "");
  ComputerInfo ConverterComputerInfo = _converterServer._converterService.ConverterQuery (_converterServer._converterServerContent.queryManager, computerSpec);
  for (int diskcount = 0; diskcount < computerInfo.osInfo.logicalVolumeInfo.Length; diskcount ++)
  {
  If (computerInfo.osInfo.logicalVolumeInfo [diskcount] .mountPoint [0] == 'C:')
  {
  ConverterStorageParamsVolumeCloningParams volume;
  volume = new ConverterStorageParamsVolumeCloningParams();
  volume. Resize = false;
  volume.sourceVolumeId = computerInfo.osInfo.logicalVolumeInfo [diskcount] .volumeId;
  ConverterStorageParamsTargetDiskParams targetdisk;
  targetdisk = new ConverterStorageParamsTargetDiskParams();
  targetdisk.volumesToClone = volume;
  converterStorageParams.targetDiskParams [0] = targetdisk;
  }

  }
  cloningParams.storageParams = converterStorageParams;

  When I use this syntax vc # tell me I can't implicitly convert ConverterStorageParamsVolumeCloningParams [ConverterStorageParamsVolumeCloningParams]

  so I searched the web and tried using the syntax used in this post:

  https://communities.VMware.com/thread/282496?start=0 & tstart = 0

  but vc # rising within me that it is a bad table statement and I have to put the foot on the object type.

  Unfortunately when I put the foot on the vc object type # tells me this type of table do not contain a property resize or sourcevolumeID.

  I use little in the circle, then someone can tell me the proper syntax for this code works?

  Hello

  one thing I see is:

  converterStorageParams.targetDiskParams is an array and must be created in the table form before you can assign items, for example:

  converterStorageParams.targetDiskParams = new ConverterStorageParamsTargetDiskParams [1];

  converterStorageParams.targetDiskParams [0] = targetdisk;

  or shorter:

  converterStorageParams.targetDiskParams = new ConverterStorageParamsTargetDiskParams [] {targetdisk};

  Also ConverterStorageParamsTargetDiskParams is a base class, you must actually use ConverterStorageParamsManagedTargetDiskParams or ConverterStorageParamsHostedTargetDiskParams (despite the fact that the latter is not add anything)

  Similar to targetdisk.volumesToClone - this is an array and should be created as such, for example

  targetdisk.volumesToClone = new [] {volume} ConverterStorageParamsVolumeCloningParams;

  HTH

  Plamen

• Is there a single SCXI module adapted to the entries for mixed probes?

  I'm trying to set up an SCXI system to receive signals from a number of different types of sensors. I have a large number of thermocouples for which I decided to use the SCXI-1102 module. I also have a unique pressure sensor (unknown spec so I'll assume type of strain gauge), a unique accelerometer (once again, unknown technique) and possibly a few tensions ahead right (unknown County and spec so assume - 10 v to + 10 v Beach max).

  Is there a single SCXI module through which I can acquire voltage signals, accelerometer and pressure sensor? Or maybe just use 2 modules instead of 3 if I have a SCXI-1530 for my accelerometer and an another module for the tensions and the pressure transducer? I was watching the module SCXI-1121, which looks promising for the tensions and pressures but then was unsure as to what block of connection to use for the combination of signals (possibly, I could live with a - 5V to + 5 v range if necessary).

  (Additional info: I use TC-2095 blocks with my SCXI-1102 module, can not really use spare entered on those voltage inflows).

  Thanks for any help.

  CASE NO.

  It's expensive,

  Thanks for your inquiry. You obviously already did a lot of research on this issue. I fear that it is unlikely that you will be able to use a single SCXI module to perform any function you listed. Necessary accelerometers such air conditioning specialist, it will take a module - as you mentioned already, something like the 1530 (4 channel accelerometer input module) would be ideal.

  However, you have a number of different options for the pressure, voltage and temperature measurements.

  For example, you could buy a mudule 1520 for your measurements of pressure and then use a generalist 1102 b for voltage and temperature (need you the connection block insulated from 1303 to condition the thermocouple readings... and work around the CYC technology for pressure readings).

  Or, you may use the module thermocouple 1102 for your temperature readings and then use a 1102 b to take pressure readings and the pressure. Of course, that would require making your own bridge to the pressure sensor configuration, but this should be pretty easy.

  Before making any final decision, I would recommend that you call your local branch of the NC and speak with a sales representative. Perhaps, a member of the sales field staff might actually come see discuss you it face to face.

  Finally, it looks like you have a number of ways relatively high for some of your reading, is why you decided to use the SCXI platform. I was just wondering if you had considered compact DAQ (cDAQ), which combines the DAQ hardware with signal conditioning. Top spec, ease of use, lower number of channels. Swings and roundabouts I guess.

  I hope this has been of some use to you.

  Best wishes

• name of the dot net class with variant

  Hello, I'm having a problem with .NET and Labview and I am sure that you will be able to help me.

  I have several dll in dotNET with their class name and I need to get the name of the class programmatically. All references of dotNET go inside a variant and I can see in the name of her variant of the name of the class, so I would read the name of variant and then through a case structure make a Variant to the data programmatically. I can't find a way to get the variant name, but I don't know there is a way to get it. I'll post some screenshots which may better explain my goal (sorry but I'm still not a Labview expert + dotNET). A class is called SHF 615 A, one is named SHF 614 A

  Thanks in advance for the help!

  
  

• Can I remove asp dot net 2.0 on an exchange server 2010

  I have a client with an exchange server 2010, and they are required to have a completed quarterly PCI scan. Last quarter of what they narrowly but this time around the issue needs to be resolved.

  90780 - Microsoft ASP.NETValidateRequest filters bypass the Cross-Site Scripting VulnerabilityCVE-2008-3842, CVE-2008-3843

  Comment by ASV:

  There is no fix available for now; Please consider implementingmitigating controls (firewall, traffic filtering, etc.) to answer these questions. For

  specific information about how to restore these questions please consult the technical report below.

  I thought that if I unregister the net 2.0 from the owa site would correct this problem.

  In the point only remove net 4.0 is installed.   When I browse the C:\Windows\Microsoft.NET\Framework\ I see

  14/06/2011 16:32

  v1.0.3705

  2009-07-13 23:20

  v1.1.4322

  27/06/2012 12:26

  v2.0.50727

  14/06/2011 14:32

  v3.0

  14/06/2011 16:32

  v3.5

  19/08/2012-13:30

  v4.0.30319

  In IIS

  Default Web site, aspnet_client, system_web 2_0_50727 & 4.0.30319 reside here with nothing in the files when viewed.

  There is no server expert here, this is a user forum.  Check out the TechNet forums, this is where you find people from server.