1/4 of my screen on the right side and about an inch on the bottom is black?

OK, I have a laptop of hp g50, fr963ua #aba... I had takin did a full restore of the system back to factory settings and since then 1/4 of the screen of the monitors on the right side and and your thumb on the bottom is black but still light... its afficherdans as a full screen when I have a wide screen I tried update driver and cannot figure out and its still displayed as 1024 x 768 60 hz... any help will be appreciated...

Hello

Welcome to the HP Forum!

alxstin6 wrote:

OK, I have a laptop of hp g50, fr963ua #aba... I had takin did a full restore of the system back to factory settings and since then 1/4 of the screen of the monitors on the right side and and your thumb on the bottom is black but still light... its afficherdans as a full screen when I have a wide screen I tried update driver and cannot figure out and its still displayed as 1024 x 768 60 hz... any help will be appreciated...

Right-click in a useful surface of the screen, then select the screen resolution. In the resolution drop-down list change resolution one that says (recommended). This will be the native screen resolution of your computer screen laptop graphics solution nd.  Once you have done that select apply and then OK.

Best regards
ERICO

Tags: Notebooks

Similar Questions

  • I "lost" my screen about 1/2 in. on the right and about 1 inch down. Cannot find out how to get it "centered" on the monitor.

    I "lost" my screen about 1/2 in. in the right margin and about 1 inch down.  May not know how to get it "centered" back on the moitor?  Thank you.

    It is a desktop monitor and there controls on this subject? If so, this is what allows you to adjust the image. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  • How do I change the sidebar on the right side of the screen to the bottom of the screen?

    How do I change the sidebar on the right side of the screen to the bottom of the screen? I called Best Buy to help me with the problem, but they were unable to help because they did not have the answer for me.

    How do I change the sidebar on the right side of the screen to the bottom of the screen?

    The Vista Sidebar can be moved to the right of the screen to the left and back again if the sidebar of Windows Properties dialog box (right-click of the icon box in the Area of Notification then Properties. I don't know any way to convert a sidebar for a bottombar, but there may be a third party alternative.

    ... Best Buy to help me with the problem, but they were unable to help because they did not have the answer for me.

    A retailer, Best Buy may not be the source of information about an operating system they sell is no longer. You are always welcome to post your questions here.

  • How to move the "blue bar" with the start option and the clock and icons of a vertical__position on the left side of the screen to the bottom of the screen... has this before happen__once, can't remember what to do.

    How can I move the 'blue bar' with the start option and the clock and icons on the left side of the screen to the bottom of the screen.  It's happened before and I forgot how to move.

    Hello pookprec

    Here's how to do it

    .

  • all my icons that were normally at the bottom of the screen have migrated to the right side and are all bundled together how to place their return to the bott

    I recently bought a HP 15 laptop with 8.1. I use mainly desktop with latest Mozilla. All my icons that is usually found at the bottom of the screen have migrated to the right side of the screen and boots, to the top, I can't do your choice. I tried to customize without result. I am 75 but strive to keep abreast, but it baffled me.

    Sorry, it's a question of support of Windows, the Windows taskbar does not part of Firefox. I do not use Windows 8.1 myself, and I don't know if the process is the same as on my Windows XP - but maybe click and hold and drag this bar down might work like on Windows XP.

    If you do not understand what I said, or it does not work, here is a popular Windows 8 support forum that should be able to help you.
    http://www.eightforums.com/

  • How move the taskbar on the right side of the screen to the bottom of the screen?

    my taskbar was now at the bottom of the screen its in how come back down to the right

    * original title - was my task bar at the bottom of the screen now its right how to return to the lower part *.

    Hello

    This should help you

    http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar

    Unlock and move the taskbar

    Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.

    Taskbar

    Hide all

    To unlock the taskbar
    • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

      Note

      To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

    To move the taskbar
    • Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

    Make sure that block you the taskbar when you have finished

    or try a restore of the system before this happened

    http://www.windowsvistauserguide.com/system_restore.htm

    If necessary do in safe mode

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  • change the toolbar to the right of the screen to the bottom of the screen

    Some changes in the toolbar on the right side of the Edit screen it down

    Hello

    http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar

    Unlock and move the taskbar

    Once you unlock the taskbar, it is ready to move to any horizontal or vertical office edge.

    Taskbar

    View all

    To unlock the taskbar
    • Right click on a space empty in the taskbar. If a checkmark beside him doesn't lock the taskbar, the taskbar is locked. You can unlock it by clicking on lock the taskbar, which removes the check mark.

      Note

      To lock the taskbar into place, right-click an empty space in the task bar, then click on lock the taskbar, so that the box is displayed.

    • Click on an empty space on the taskbar, and then hold down the mouse button, dragging the taskbar to one of the four sides of the office. Once the taskbar where you want, release the mouse button.

  • When you play games like Cityville, Farmville etc. Never, I get the full screen. The bottom and the right side are cut off

    When I opened these games, parts of the game screen is not displayed. If I click to full screen in Farmville, it shows in Cityville I can't click to full screen but the part of the screen is missing. If I open these games in Internet Explorer. the entire screen appears.

    I also have this problem, the bottom of Cityville fell after some actions, mainly requesting assistance on an object that must be 'charged '. The regular calls that go straight to the facebook wall don't do that. In any case, after experimentation, I found an easy solution that works every time. I have click on the free gifts tab and send the box stuff, NRG, allowed, just some, and it resets the problem without having to close the tab in Firefox.

  • some how my toolbar got the switch on the right side and I don't know how have switched back it to bottom

    I've looked everywhere and don't see where it says it can be changed can someone please help me with this it's driving me crazy, it is on the right side of the screen

    Right-click on the taskbar and make sure it is not locked. Left click on an empty area and drag it to the bottom. Lock the taskbar. Bruce Hagen
    MS - MVP October 1, 2004 ~ September 30, 2010
    Imperial Beach, CA

  • Screen at the start of black Lenovo A540

    My; Lenovo A540 remained on during the night and when I went in to wake up today there is just a black screen, no cursor or anything like that. I let it sit for a while to see if anything was just locked up, but he never returned to the top. I finally stop and now I just get the same black screen as I did before. I tried to unplug it from the back of the computer and the wall, and I stopped several times and tried to restart but nothing. I did my due diligence on Google but none of the typical buttons (F2, F8, F11, etc.) anything. I just get the black screen. It is not even giving me the Lenovo logo which appear rotation points. I don't have something new recently installed, or have it improved. I removed all devices and tried rebooting without success. Does anyone have any ideas as to what I can do to get this desktop computer up? I have no CD of restoration, but I don't know that those help even at this stage aynway. Any advice would be greatly appreciated. Thank you.

    Curiously, I let it sit for a few hours and it works immediately. I had several problems of this kind with the Lenovo 2 I've owned. This is a replacement, because one was doing something similar. It should start to where I got the giant Lenovo on the screen, but the points of rotation would never appear. I'm willing to bet money that my next computer will not be an another Lenovo.

  • Black finger across the screen to the bottom only in locked mode - retina 2014

    Mine is a MacBook Pro (retina, 15 inches, mi 2014) 2.2 GHz with integrated display. When I opened the laptop this morning, I was welcomed by a screen locked and noticed a black spot on the lower part of the screen. My heart sank for a moment, but when I logged in, I did not notice the finger any longer.

    I see the black spot that looks like an ink spot (see photo) when I get back to screen locked again. What is an LCD failure or is there something else going on? If it's an LCD has failed, why not see the problem when it is unlocked? How to fix? Thanks for any help.

    Notice the black spot. The white point at the bottom left of the screen above is just the cursor hidden.

    No stain when unlocked can be exceeded.

    Could be a hardware failure.  If you bought AppleCare, you have 3 years warranty on the material and can diagnose the Genius Bar it repair free of charge - it is reproducible, so you can show them.

  • DeskJet 712C: ink cartridge is stuck in the right side and will not go

    I have an old DeskJet 712C printer which was working fine until today. Strangely, the ink cartridge is stuck in the right side of the printer and will not spend. As soon as I turn on the printer, the red light starts flashing. Does anyone know tricks to get the cartridge to move again? Thank you for your help.

    Hello

    It may be possible to move the cart if you turn the printer off. Unplug the printer and open the cover of the printer.  See if you can move the carriage by hand.  If possible, move the carriage to the Center.  Check that nothing of blocking the abnormal movements of transport - for example the pieces of paper.

    Close the cover and then plug the printer back. I hope this will help.

    I found a YouTube video that shows fixing carriage jam on printers C4200 (I know that they are not the same as the 712 C), but some of the suggestions will be useful if my initial thought above does not help.  the video is on this link:

    http://www.YouTube.com/watch?v=l9x6ZLIYMog

    Once again these tips are not specifically for your printer, but they can help solve your problem.

    I hope that was helpful.

  • Unusual problem: partially black screen on the bottom right

    Hi all

    I would like to know what I can do to address these problems:

    I only had my Clip 4 GB zip drive for a month, and today I noticed after that him have plugged for charging for more than a day lower the right hand screen is black. The rest of the screen is fine, it's just this little corner of the screen that is like that! Partially black screen is triangular and always there.

    Another problem I've noticed is that I had it charging for more than a day, I expect to be fully recharged at the time where I unplugged, yet when I watched the news system, he indicated that power was '88% '. And then, when I was checked to make sure it read "77%", then again in '88% ' after I checked it once more. WTH is happening? Why the change?

    Oh, and I think that the firmware is up to date (not sure if this is relevant) because they say "Version: V01.01.20F" in the settings.

    In addition, there is a third question, I believe. I tried to reset by pressing the button of power for 20-30 seconds, but for some reason any, my drive is as insensitive to this, he starts just straight up / stops due to the initial pressure - i.e. function Reset does not work.

    Others that the three above, I have not noticed other unusual symptoms. I would be extremely grateful if anyone could give me any advice to solve this problem.

    Edit - I just noticed that when the drive is connected, he said 100% fully charged, but as soon as I unplug the 88% said

    Thank you.

    I would not be concerned about battery level indicator, as the Zip Clip is infamous for having been innacurate that.  Apparently better, if you want to know the exact charge: go to system info. screen (under system settings) and check the percentage of battery charge it.

    Troubesome more is the screen problem.  If I were you, I would try to manually reapply the latest firmware (see firmware upgrade thread sticky at the top of the forum).  If that doesn't resolve the issues, I would contact the seller and/or the SanDisk for a defective/warranty drive replacement.

    http://www.SanDisk.com/about-SanDisk/contact-us/

  • screen of the iPad 2 black after updated 9.3.3 update

    Hello my iPad 2 upgrade 9.3.3 and after the update automatically its only show black screen. I have hard reset and then released factory with iTunes, the problem persists. I tried to go back to 9.1 (who was the current version) with ipsw but iTunes cannot me tell my camera is not compatible with the 9.1 (similar problem occurred with 9.2 but I managed to roll back this update to 9.1.

    How can I solve this problem? Thank you

    iPad 2 model A1396

    He did not have many complaints reported install IOS 9.3.3 then we are at the best time to guess the issue. Have you tried install IOS 9.3.3 via iTunes?

  • The right side and express USB card reader does not work

    Hello

    The USB 3.0 right on my rMBP does not work. I have can´t to connect any device to this side. No connection or power.

    Express card reader doesn't work or the other. Finder or disk utility will not show map of mountain.

    I can´t find the card express under system reports reader.

    I ran a test for diagnosis of Apple without any problem.

    I have reset the SMC & LANDAU.

    I reinstalled the operating system without success.

    Anyone who knows how to fix this?

    MacBook Pro with OS X El Capitan 10.11.5, Retina display

    Can someone help me here, please!

    Based on what you have tried and if can't see any device in disk utility, you are dealing with a hardware problem.  Your best option is an appointment at an Apple store for a FREE genius bar.

    Ciao.

Maybe you are looking for

  • Can I search for cells that contain a reference to a particular cell?

    I want to find the cells that contain a reference to a given cell. This would greatly facilitate debugging spreadsheets. Is this possible?

  • Multicolumn list Configuration file

    I'm trying to make use of multi-column listbox to create a user interface of façade friendly, easy to use for the creation of a configuration file. I wish I had 2 drop-down lists: (1) contains a master list of hardware devices available to the user,

  • User profile cannot be downloaded

    I use Windows Vista and have 2 profiles set up - one is the administrator account and the other just a user. I cannot now log on my administrator account and I get the message "user profile cannot be downloaded. I tried to set up another profile so I

  • How can I replace a compaq presario C762NR hard drive and reinstall windows?

    My friend brought me his computer and said that he would not start. I tried to boot into safe mode and normal mode and it would not work. It would simply flash a blue screen and restart. After you run a test it is determined that the hard drive has f

  • Tool to watch how an application interacts with the OS network stack?

    I have a third-party commercial application that sends a UDP broadcast and waits for a response from machines on the same network.  It works fine when only one card NETWORK interface (we'll call it "primary") is enabled but if I enable the 'secondary