Defrag does not work as expected
Defrag is set at the Wednesday night at 03:00 and doesn't run. Also running Microsoft Security Essentials, which is scheduled every day at 01:00 doesn't and I unchecked do not work if the computer is busy. Any ideas? I don't see them in Windows Scheduler are they suppose to be? Thanks for any help.
Default Disk Defragmenter does not wake the computer to run. However, you can change this by clicking on start > then type in "Task Scheduler" in the search box, hit enter or click on it to open it.
Tags: Windows
Similar Questions
-
Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support. Error: failed to hose CPI. »
Quit Safari, Chrome to quit smoking. If necessary Forcequit.
Start Safari while holding the SHIFT key, select the menu Safari ClearHistory, then after this check that the homepage is the one you want.
Do the same for Chrome.
Close all browsers, restart the mac.
-
FRAGMENTATION applied on several logical Tables does NOT WORK as expected
Dear all,
I have the below scenario implemented that does not work as expected.
I have a logic Table LT1 (SUN) which is being implemented based on two physical Tables PT1 and PT2 (PT1 and PT2 are DIMS). LT1 has two of LTS, LTS1 and LTS2 implemented PT1 and PT2, respectively. Fragmentation is applied based on the ID of the system Source the PT1 and PT2 are loaded from different source systems. The granularity of the Tables physical is the same.
Likewise, we have LT2 (DIM), which is implemented in two Tables of physics more and Fragmentation is applied in the Source systems function ID.
We have an other TIMES DIM on which fragmentation is not applied.
All of the above tables are linked to the fact (also physical and logical).
I filter the data for TIME_DIM. Year = 2014 in all scenarios below.
Scenario1: This solution works as expected when I shoot columns of LT1, SUN as well as the fact of TIME. (YEAR = 2014 is passed in the WHERE clause of queries UNION ALL 2, which is OK)
Scenario2: This solution is also works very well when I shoot columns of LT2, SUN as well as the fact of TIME. (YEAR = 2014 is passed in the WHERE clause of queries UNION ALL 2, which is OK)
Scenario 3: When I pull the LT1, LT2, SUN report, done TIME and filter the data for TIME_DIM. Year = 2014, the report does NOT WORK as expected. (Filter on YEAR = 2014 is not passed in UNION All queries in this scenario)
When I build the model above (for scenario 3) report, it does not go as planned. Do not throw any error, it displays incorrect as results as physical demand generated by the BI server is not correct. Some of the filters is past the TIME SUN are not injected at the request of physics.
Someone come in this scenario, no solution to the above is greatly appreciated. Thanks in advance
Kind regards
Madhav P.
This is the bug in OBIEE 11 g of product. Oracle has provided the patch for the same and it is absolutely working fine now.
Kind regards
Madhav P.
-
Adapter DB of the poll as singleton process does not work as expected
Poller DB adapater uses to control the transaction all the seconds to the downstream system and I want this poller as singleton process (an instance should be in working order at the same time).
As suggested in the documents of the oracle, here are the settings that are configured in the composite.xml file.
< name of service = "polling_Mange_Alert_Events."
UI:wsdlLocation = "polling_Mange_Alert_Events.wsdl" > "
" < interface.wsdl interface =" http://xmlns.oracle.com/pcbpel/adapter/db/Application1/int_app_manageAlerts/polling_Mange_Alert_Events#wsdl.interface(polling_Mange_Alert_Events_ptt) "/ > "
< binding.jca config = "polling_Mange_Alert_Events_db.jca" >
< property name = "singleton" > true < / property >
< binding.jca >
< name = "jca.retry.count property" type = "xs: int" much = 'false' override = "may" > 2147483647 < / property > "
< name = "jca.retry.interval property" type = "xs: int" much = 'false' "
Override = "may" > 1 < / property >
< name = "jca.retry.backoff property" type = "xs: int" much = 'false' "
Override = 'may' > 2 < / property >
< name = "jca.retry.maxInterval property" type = "xs: String" much = 'false' "
Override = "may" > 120 < / property >
< / service >
JCA file settings are:
< name of the adapter-config = "polling_Mange_Alert_Events" = 'Database adapter' adapter wsdlLocation = "polling_Mange_Alert_Events.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">
< connection-factory location = ' ist/DB/vff-int-was"UIConnectionName ="PT_APPINFRA"adapterRef =" "/ >
< endpoint-activation portType operation "polling_Mange_Alert_Events_ptt" = "receive" = >
< className = "oracle.tip.adapter.db.DBActivationSpec activation-spec" >
< property name = value = "polling_Mange_Alert_Events.ManageAlertEvents" / "DescriptorName" >
< property name = "Nomrequete" value = "polling_Mange_Alert_EventsSelect" / >
< property name = "MappingsMetaDataURL" value = "polling_Mange_Alert_Events - or - mappings.xml" / >
< property name = "PollingStrategy" value = "LogicalDeletePollingStrategy" / >
< property name = "MarkReadColumn" value = "TRANSACTION_STATUS" / >
< property name = "MarkReadValue" value = "Treatment" / >
< property name = "PollingInterval" value = "10" / >
< property name = "MaxRaiseSize" value = "5" / >
< property name = "MaxTransactionSize" value = "5" / >
< property name = "NumberOfThreads" value = "1" / >
< property name = "ReturnSingleResultSet" value = "false" / >
< property name = "MarkUnreadValue" value = "pending" / >
< / activation-spec >
< / point endpoint-activation >
< / adapter-config >
This poller process runs on the environment in clusters (2 soa nodes) and it does not work as expected in the singleton process.
Please advice to solve this problem?
I think that, in this scenario, you must use the distributed polling in the DB adapter. You can select in the voting options in the DB adapter configuration wizard.
-
defrager disk does not work as expected
I tried to program the defrager drive to run on a schedule and it confirms that it is now a calendar but it does not work on the scheduled date and time. As a result, I have to manually defragment. Thanks in advance
Try this:
Start > Type, Services > click Services > Scroll to drive Derfragmenter > left click, properties > list drop-down list, the automatic value or delayed automatic
-
I ran Defrag Vista several times (each for hours) and always says that "defragment your drive hard drive will improve the performance.
It seems that he never really ran that whole defragmentation at all! It is perhaps also the reason why Defrag Vista does not display progress with graphical display. It does not work.
Who out there can help find a Defrag Vista work?
Thank you
Hello
The Vista defrag works quietly in the background without intervention on your part
http://support.Microsoft.com/kb/942092
In Windows Vista, there are a lot of improvements in the defrag engine and handling of fragmentation. By default, Windows Vista uses Task Scheduler to automatically keep the defragmented hard drive. This Automatic defragmentation does not affect the performance of the Windows Vista operating system...
If you want to use a much better defragmentation program which is free and where you can see the results, I suggest this one:
http://www.Auslogics.com/en/software/disk-defrag/
See you soon.
-
BEFORE the UPDATE of relaxation with time stamp does not work as expected
We have a scenario where I check update operations on a table.
I created a before update TRIGGER, so that every time he goes an update on the main table statement, one before the image of the lines is captured in the table of audit with timestamp.
Since it is before updating, ideally the audit table timestamp (TRG_INS_TMST) should be less main table timestamp (IBMSNAP_LOGMARKER) VALUE, I mean TRIGGER should happen before the update.
(I could understand in a way that the UPDATE statement is formulated with SYSTIMESTAMP earlier before the TRIGGER is evaluated and so UPDATE is to have a time stamp prior to TRIGGER, but this isn't what we wanted. We want PRIOR update)
'Table' IBM_SNAPOPERATION IBM_SNAPLOGMARKER ---- ----------------- ------------------------------- T1 U 13-OCT-15 03.07.01.775236 AM <<---------- This is the main table, This should have the latest timestamp T2 I 13-OCT-15 03.07.01.775953 AM
Here is my test case.
DELETE FROM TEST_TRIGGER_1; DELETE FROM TEST_TRIGGER_2; SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1 UNION SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2; INSERT INTO TEST_TRIGGER_1 (ID,ibm_snapoperation, ibm_snaplogmarker) VALUES (1, 'I', SYSTIMESTAMP); COMMIT; SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1 UNION SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2; UPDATE TEST_TRIGGER_1 SET IBM_SNAPOPERATION = 'U', ibm_snaplogmarker = SYSTIMESTAMP; COMMIT; SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1 UNION SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
Def trigger:
CREATE OR REPLACE TRIGGER etl_dbo.TEST_TRIGGER_1_TRG BEFORE UPDATE OF IBM_SNAPOPERATION ON TEST_TRIGGER_1 REFERENCING OLD AS OLD NEW AS NEW FOR EACH ROW WHEN ( NEW.IBM_SNAPOPERATION= 'U' ) DECLARE V_SQLCODE VARCHAR2(3000); --PRAGMA AUTONOMOUS_TRANSACTION; BEGIN INSERT INTO etl_dbo.TEST_TRIGGER_2 (ID, IBM_SNAPOPERATION, IBM_SNAPLOGMARKER, TRG_INS_TMST ) VALUES (:OLD.ID,:OLD.IBM_SNAPOPERATION,:OLD.IBM_SNAPLOGMARKER,SYSTIMESTAMP) ; --COMMIT; END; /
Output is something like this
1 row deleted. 1 row deleted. no rows selected. 1 row created. Commit complete. 'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER ---- ----------------- ------------------------------- T1 I 13-OCT-15 03.07.00.927546 AM 1 row selected. 1 row updated. Commit complete. 'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER ---- ----------------- ------------------------------- T1 U 13-OCT-15 03.07.01.775236 AM <<---------- This is the main table, This should have the latest timestamp T2 I 13-OCT-15 03.07.01.775953 AM 2 rows selected.
But for some reason, even after the creation of the 'AFTER' trigger for update, it works as expected. Sense - the main table is not having the last timestamp given
It's OKAY - I told you in my reply earlier. Reread my answer.
could understand somehow that the UPDATE statement is made with earlier
SYSTIMESTAMP until the TRIGGER is assessed and updated so is to have
time stamp prior to the trigger, but this isn't what we wanted. We want to
BEFORE the update)
As I told you before that your UPDATE statement occurs BEFORE the trigger is activated.
Despite what the other speakers have said, it makes NO DIFFERENCE if you use a BEFORE UPDATE or an AFTER UPDATE trigger. Your UPDATE statement runs ALWAYS BEFORE the trigger.
HE has TO - it's your update processing statement that causes the trigger to fire.
Your update statement includes SYSTIMESTAMP. If during the processing of your return to update the value of SYSTIMESTAMP "at this exact time" is captured.
Then your trigger is activated and starts to run. ANY reference to SYSTIMESTAMP that you use in your trigger cannot be earlier than the value of until the trigger was executed. It's IMPOSSIBLE.
The trigger can use the SAME value by referencing: NEW and the column name you store the value. Or the trigger can get its own value that your code is doing.
But the SYSTIMESTAMP value in the trigger will NEVER earlier than the value in your query.
And none of these values can actually be used to tell when the changes are really ENGAGED since the trigger does not work and CAN NOT, to know when, or if, a validation occurs.
Reread my first answer - he explains all this.
-
xdoxslt:get_variable does not work as expected inside, if
Hi all
I want to compare the maximum value of an element (the name of the element - ROUND ) with other values.
So I have a loop for iteration. Inside the loop, I have an if statement to compare the values.
If the value of the element is greater than the max value, I replace the max value with the value of the element.
Here, up to 9 it works fine. But after 9, if the value of the element is 10, the comparison is not the case. The Code below does not work.
Code:
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
<? xdoxslt:set_variable($_XDOCTX,_'maxcount',_0)? >
<? for-each: Task_History_V? >
<? If: lower - case (STEP_NAME_1) = "analysis"? >
<? ROUND? > <? » ---« ? > <? xdoxslt:get_variable($_XDOCTX,_'maxcount')? >
<? If: ROUND > (xdoxslt:get_variable($_XDOCTX,_'maxcount'))? >
<? xdoxslt:set_variable($_XDOCTX,_'maxcount',_ROUND)? >
<? end if? >
<? end if? >
<? end foreach? >
<? "Max value: '? >
<? xdoxslt:get_variable($_XDOCTX,_'maxcount')? >
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Example of XML data:
< / Task_History_V > < Task_History_V >
8th < CHANNEL > < / ROUND >
Analysis of < STEP_NAME_1 > < / STEP_NAME_1 >
< TASK_STATUS_CODE > 4 < / TASK_STATUS_CODE >
< TASK_STATUS > completed < / TASK_STATUS >
< ACT_START_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_START_DATE >
< ACT_END_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_END_DATE >
< ACTUAL_EFFORT > 1.0 < / ACTUAL_EFFORT >
< / Task_History_V > < Task_History_V >
< 9th > < / ROUND >
Analysis of < STEP_NAME_1 > < / STEP_NAME_1 >
< TASK_STATUS_CODE > 4 < / TASK_STATUS_CODE >
< TASK_STATUS > completed < / TASK_STATUS >
< ACT_START_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_START_DATE >
< ACT_END_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_END_DATE >
< ACTUAL_EFFORT > 1.0 < / ACTUAL_EFFORT >
< / Task_History_V >
< Task_History_V >
10th < CHANNEL > < / ROUND >
Analysis of < STEP_NAME_1 > < / STEP_NAME_1 >
< TASK_STATUS_CODE > 4 < / TASK_STATUS_CODE >
< TASK_STATUS > completed < / TASK_STATUS >
< ACT_START_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_START_DATE >
< ACT_END_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_END_DATE >
< ACTUAL_EFFORT > 1.0 < / ACTUAL_EFFORT >
< / Task_History_V >
< Task_History_V >
< ROUND 11 > < / ROUND >
Analysis of < STEP_NAME_1 > < / STEP_NAME_1 >
< TASK_STATUS_CODE > 4 < / TASK_STATUS_CODE >
< TASK_STATUS > completed < / TASK_STATUS >
< ACT_START_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_START_DATE >
< ACT_END_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_END_DATE >
< ACTUAL_EFFORT > 1.0 < / ACTUAL_EFFORT >
< / Task_History_V >
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Expected results:
8 0
9 8
10 9
11 10
Max value:
11
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Output current:
8 0
9 8
10 9
11 9
Max value:
9
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
He would be grateful if you help me to solve this problem.
Thanks in advance.
-Hari
(xdoxslt:get_variable($_XDOCTX,_'maxcount'))? >
TO
number (xdoxslt:get_variable($_XDOCTX,_'maxcount')). >
-
According to http://support.mozilla.com/en-us/kb/keyboard+shortcuts,.
'Ctrl + End' should move the active tab to the end of the list of tabs.But the shortcut does not work. Only, it scrolls to the end of the current page as if only "End" is pressed.
I tried the mode without failure of firefox and closed all other open programs.
What to do to debug this problem?
or may there is a bug in firefox somehow?See the post of dao in this MozillaZine forum thread: http://forums.mozillazine.org/viewtopic.php?f=23 & t = 1304895
Add code to userChrome.css below @namespace.
See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files
@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */ .tabbrowser-tab[selected="true"] {-moz-user-focus: normal !important;}
-
Hello
I am trying to create a game but my VI does not work as I want it. IM pretty much a beginner to labview and have no idea of what's wrong with my code. Help please!
So far I've only added the 'up' and 'down' button, and I want the red square to stop a black square or otherwise follow the instructions of the button that is pressed.
I'm not entirely sure how I should go to. My trial ended a horrible failure.
Any help would be appreciated!
Thank you
1 stop using local variables. They are at the origin of the race conditions and you can use the stream for each thing. The main thing is have it your curls 'building the map' transfer data to your event loop. This includes the initialization of your shift registers...
2. make an event for your stop button.
3 place the controls to their corresponding events. This will allow the locking buttons.
4. the work on the line of things better. It will help a ton by keeping your paths easier to read.
-
CTRL key does not work as expected
Original title: keyboard Help!There is a recurring issue going on with my keyboard or very probably my pc...Well first to start with - I use a software type "ventrilo" called "mumble" that uses the 'CTRL' key as a key to talk with others in the same precedente.* *-could be a reasonMy CTRL key seems really screw randomly until that moment, it turn on sticky keys [where ctrl has practically been pressed permanently] even if it is not enabled on the settings... which makes it really difficult to browse web site or use games because I'm unable to type.Even if I try to disable it by using the two keys ctrl - it does not turn off...When I try to copy and paste using my CTRL key left it appears just under the letter c or v when I'm trying to do, but when I do it with my right ctrl - it is successful...* steam question *.I use also a program called "steam" that allows me to talk with others and play some games - but the sticky keys seem to be really stuck on this issue, I am unable to do anything...Whenever I press 'a' after that it is already used once - it will remove 2 characters: example: I type AGT-> and I press 'a' once more-> deletions G and Tor whenever I have press BACKSPACE at all during a conversation of steam, it deletes everything.Urgent W on it also a tab or an im window closed on...pressing V will paste what I had copied at all, and finally pressing z would substitute a letter - for example: za-> type z once more-> towers to zzI hope you understand what I'm talking... help? Thank you...Hello Kent,
Let us make sure that this isn't a keyboard problem. Connect a different keyboard to see if the CTRL key is working. If it works fine, then it is a problem of faulty device. You may need to replace the driver.
If this does not work on the new keyboard, then it must be a setting in the software that you have installed that is causing this problem.
As a work around, I suggest to uninstall and reinstall the drivers for the keyboard and check if this solves this problem.
1. type of Device Manager in the Start Search box and press on enter.
2. browse the keyboard.
3. right click on the mentioned keyboard driver and select Uninstall.
4. once the driver is uninstalled, restart the computer and check if the problem persists.
Note: Windows will automatically detect the keyboard and install the necessary driver via Windows updates.
If the keyboard print incorrect characters, then try the steps mentioned in http://support.microsoft.com/kb/258826
I hope this helps. If you have any questions, please let us know.
-
ACS 5.2 - accounts User File Update does not work as expected
Hello, I have a serious problem with the import of the fixed IP addresses to user accounts in ACS 5.2.
Because this attribute cannot be migrated directly I try via "file operations--> update". I created the file update model, but entered IP addresses aren't imported - all other attributes can be changed without problem.
If I try to "Add file operations-->" it works well, but I can't use this option.
IPv4 address attribute in 'System Administration--> Configuration--> dictionaries--> identity--> internal users' is added correctly and appropriate field is not in user accounts.
Do you have any idea what can be wrong?
Hi Michal,
Yes I submitted this as a bug recently. Sometimes after a migration from ACS 4.
CSCtk05027 : custom fields for users after migration - import/update does not work
Try to change one of your user input. Just add an IP manually it for example. Then do the update. She will work for this user, and it will update the ip address.
The solution is to export all users of your DCC 5. Then remove it from the database and then to make an import file 'Add' instead of update. A bit of a silly workaround but the bug should be fixed in future patches (no information on that yet).
Kind regards
Nicolas
===
Remember responses of the rate that you find useful
-
Server.findForType () does not work as expected
Hi all,
I have problem with finding vApps using the Server.findForType () method.
Lets start from the beginning...
Goal is to produce streams of work that could be called from outside using SOAP (SOAP is unfortunately obligatory). Portal that will call worlflows is underway of another people.
They said a number of input and output parameters that workflows must accept and provide.
I have test with vCenter Orchestrator environment, Director and everything works fine.
SOAP host is created in Orchestrator using the build workflow (attached configuration - SOAP_Host_Configuration.rtf).
I use SOAP UI to test the portal > communication Orchestrator.
I am able to call using SOAP UI workflows.
I am producing a simple workflow what powers on TIME using the string as an input parameter and who would return the same data as output parameter - VAPP UUID, ID, href, or anything that is considered VAPP unique brand.
Out of SOAP UI of my VAPP is attached (SOAP_UI_vApp_Info.txt).
If I try to use Server.findForType () it only works if I specify it like this:
Server.findForType ("vCloud:VApp", "8265a03471add63d97f36c52e86fba8cebade2a3ca7bfcb4cb58cdff9ae9f8c / / /https://172.16.140.215/api/vApp/vapp-c7b33a3e-2174-465d-a4f2-0fa9663dc75d");
and it does not work if if specify like this
Server.findForType ("vCloud:VApp", "urn: vcloud:vapp:c7b33a3e - 2174-465 d-a4f2-0fa9663dc75d");
In this case I get error:
[21:49:35.911 2014-08-10] [I] Server error: ch.dunes.model.sdk.SDKFinderException: cannot perform the operation ' find (' TIME ',' urn: vcloud:vapp:c7b33a3e - 2174-465 d-a4f2-0fa9663dc75d') ' on the plugin "vCloud".
Problem is that data "8265a03471add63d97f36c52e86fba8cebade2a3ca7bfcb4cb58cdff9ae9f8c / / / . https://172.16.140.215/API/vApp/vApp-c7b33a3e-2174-465D-a4f2-0fa9663dc75d "cannot be retrieved afterwords and be used as a unique identifier VAPP - vapp.dunesId returns nothing. "
I use:
vCenter 5.5.0 1623101
vCO 5.5.1. 1617127
vCloud Director 5.5.1 1753992
vCloud Director Plugin 5.5.0.1894135
vCenter Plugin 5.5.2.1869849
Thank you very much for the help.
Goran
Of course, no problem. I found even a better way to retrieve by ID directly.
Ex:
vApp = host.getEntityById ("PPPV", "urn: vcloud:vapp:65a4db36-8efa-4512-afb5-7d663c13e2be");
Kind regards
ALEKS
-
Of defrag does not work due to the custom configuration created by another program
When I try to do a defrag, I get a message saying "disturbance disk currently uses custom settings created by another program"
Before changing the annex, you need to remove the custom settings. Here's this message 2 boxes, 1 said 'delete settings' and the other says "Cancel". When I click on 'delete settings', I am back on the desktop. This repeated its self everytime I have try to defragment, it does not open as administrator or in 'safe MODE '.Dell Inspiron 1545Windows 7. 64-bit with more than 70% of available space.I am somewhat tech savvy if things are fairly well explained.Can someone helpThank you very muchYou have a few options. I finally got my work to the rigging.
1. all reformat
2 * at microsoft
3. take out the computer in a microsoft store, and it will fix it for free (why? because w10 and they know it causes problems)
W10 return to w7 installed incorrectly. Your computer is still acting as w10 is always there, even when it is not.
So what I did, i wouldn't recommend, receiving a Filipina Lady a (microsoft) call center to work on and fix my computer. They have done MUCH worse. (I already insured at this point that microsoft is fixing my computer for free because of the w10) So after the fried Lady basically my computer, I brought my rig to the nearest store from microsoft and they fix everything, for free.
NOW, after I brought my home computer, I downloaded a program 3rd party called GWX Control Panel. What it does, is removes all the updates from the W10, removes the POS auto upgrade feature and block updates future w10.
http://ultimateoutsider.com/downloads/---> click for GWX
If you do not use this program, w10 automatically updates AGAIN! Even though microsoft said it is a rare event DONT BELIEVE IT! It is a widespread problem, and microsoft is FORCED to happen.
Needless to say, I lost faith in microsoft because of faulty software programming. (even my xbox one...) So I not buy more than several microsoft products, because of these bad blantly business practices.
I'm sorry this happened to you, and I understand the frustration. Especially if younever wanted to w10 in the first place.
-
Bluetooth and mouse pad does not work as expected.
Original title: device issues
Hi there everyone,
I bought an ASUS with Windows 8 and I must say after finding my way (which took a while) I am very happy with the PC and Windows 8! Buy - do have a problem with two things:
1. my bluetooth switch does not seem to be enabled - so can not turn on or off. (here turn on!)
2. my mousepad - will not work - it works for August two seconds if I start the PC without an external mouse, and then it just closes. I checked the settings of the mouse and the instructions tell me I should change something in the settings of the mouse device, but this option (tab) is not there.
I checked the edits and there seems to be no shortage.
Does anyone else have these problems? Any /advice help would be appreciated!
Thank you
Monique
Hi Monique
Here is the hardware issues that must be addressed by ASUS, especially on a new system.
There should be clear instructions to install/activate the Bluetooth device.
The utility for the Touchpad is also a part of manufacturers. May not have been installed properly.
These can also be known on this model of laptop specific issues.
Go to this site and select your model for specific help.
ASUSTeK Computer Inc. - Support - Troubleshooting:
http://support.ASUS.com/download/options.aspx?SLanguage=en&type=9
This will have information on the hardware devices installed on this model and download the latest drivers.
You can also discuss this issue with others who have this model.
ASUSTeK Computer Inc. - Support Forums:
http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us
Concerning
Maybe you are looking for
-
At a prompt of updated, but not sure that's really of HP or its virus
Its a Pavilion DV 2268ca, win7 64-bit system. the prompt looks like this Fearing that it might be the virus, I thought the update.
-
Hello I need to perform tests of test time of simple reaction for one of my experiences, I have to design a view Lab program to achieve the following experimental device: 1 pre trial interval 2 s - followed - A yellow (LED) SIGNAL of WARNING (which s
-
DIAC, Triac and SCR does not properly in Multisim 10.0
Not to get the real answer or are having a problem to activate the Diac, Triac NSB and the SCR. And how do I get the symbol of CBS for Multisim 10.0?
-
I can not installed any program, not even place dating 8007000 b error code from my windows, and for windows live menssenger error is Microsoft.VC 80.le CRT version 8.0.50727.42
-
X 230 (3435-3 MG) Tablet Help please / can install backlight for the keyboard?