defrager disk does not work as expected

I tried to program the defrager drive to run on a schedule and it confirms that it is now a calendar but it does not work on the scheduled date and time. As a result, I have to manually defragment. Thanks in advance

Try this:

Start > Type, Services > click Services > Scroll to drive Derfragmenter > left click, properties > list drop-down list, the automatic value or delayed automatic

Tags: Windows

Similar Questions

Defraging disk does not work

whenever I have try to defragment my laptop restarts, I don't need to defrag because my system is slow

Hello

It is very interesting question, but in my view the correct answer to your question, you should look on the Microsoft page because it is a typical problem of operating system. If I found a few explanations, I'll let you know.

Please check if the laptop restarts always in the same position (22%). In this case, it is possible that a sector on the HARD disk may be damaged or corrupted.

For 1000-zx satellite recovery disk does not work

XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

Hello

Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

Good bye

Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support. Error: failed to hose CPI. »

Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support. Error: failed to hose CPI. »

Quit Safari, Chrome to quit smoking. If necessary Forcequit.

Start Safari while holding the SHIFT key, select the menu Safari ClearHistory, then after this check that the homepage is the one you want.

Do the same for Chrome.

Close all browsers, restart the mac.

FRAGMENTATION applied on several logical Tables does NOT WORK as expected

Dear all,
I have the below scenario implemented that does not work as expected.
I have a logic Table LT1 (SUN) which is being implemented based on two physical Tables PT1 and PT2 (PT1 and PT2 are DIMS). LT1 has two of LTS, LTS1 and LTS2 implemented PT1 and PT2, respectively. Fragmentation is applied based on the ID of the system Source the PT1 and PT2 are loaded from different source systems. The granularity of the Tables physical is the same.
Likewise, we have LT2 (DIM), which is implemented in two Tables of physics more and Fragmentation is applied in the Source systems function ID.
We have an other TIMES DIM on which fragmentation is not applied.
All of the above tables are linked to the fact (also physical and logical).
I filter the data for TIME_DIM. Year = 2014 in all scenarios below.
Scenario1: This solution works as expected when I shoot columns of LT1, SUN as well as the fact of TIME. (YEAR = 2014 is passed in the WHERE clause of queries UNION ALL 2, which is OK)
Scenario2: This solution is also works very well when I shoot columns of LT2, SUN as well as the fact of TIME. (YEAR = 2014 is passed in the WHERE clause of queries UNION ALL 2, which is OK)
Scenario 3: When I pull the LT1, LT2, SUN report, done TIME and filter the data for TIME_DIM. Year = 2014, the report does NOT WORK as expected. (Filter on YEAR = 2014 is not passed in UNION All queries in this scenario)
When I build the model above (for scenario 3) report, it does not go as planned. Do not throw any error, it displays incorrect as results as physical demand generated by the BI server is not correct. Some of the filters is past the TIME SUN are not injected at the request of physics.
Someone come in this scenario, no solution to the above is greatly appreciated. Thanks in advance
Kind regards
Madhav P.

This is the bug in OBIEE 11 g of product. Oracle has provided the patch for the same and it is absolutely working fine now.

Kind regards

Madhav P.

Adapter DB of the poll as singleton process does not work as expected

Poller DB adapater uses to control the transaction all the seconds to the downstream system and I want this poller as singleton process (an instance should be in working order at the same time).
As suggested in the documents of the oracle, here are the settings that are configured in the composite.xml file.
< name of service = "polling_Mange_Alert_Events."
UI:wsdlLocation = "polling_Mange_Alert_Events.wsdl" > "
" < interface.wsdl interface =" http://xmlns.oracle.com/pcbpel/adapter/db/Application1/int_app_manageAlerts/polling_Mange_Alert_Events#wsdl.interface(polling_Mange_Alert_Events_ptt) "/ > "
< binding.jca config = "polling_Mange_Alert_Events_db.jca" >
< property name = "singleton" > true < / property >
< binding.jca >
< name = "jca.retry.count property" type = "xs: int" much = 'false' override = "may" > 2147483647 < / property > "
< name = "jca.retry.interval property" type = "xs: int" much = 'false' "
Override = "may" > 1 < / property >
< name = "jca.retry.backoff property" type = "xs: int" much = 'false' "
Override = 'may' > 2 < / property >
< name = "jca.retry.maxInterval property" type = "xs: String" much = 'false' "
Override = "may" > 120 < / property >
< / service >
JCA file settings are:
< name of the adapter-config = "polling_Mange_Alert_Events" = 'Database adapter' adapter wsdlLocation = "polling_Mange_Alert_Events.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">
< connection-factory location = ' ist/DB/vff-int-was"UIConnectionName ="PT_APPINFRA"adapterRef =" "/ >
< endpoint-activation portType operation "polling_Mange_Alert_Events_ptt" = "receive" = >
< className = "oracle.tip.adapter.db.DBActivationSpec activation-spec" >
< property name = value = "polling_Mange_Alert_Events.ManageAlertEvents" / "DescriptorName" >
< property name = "Nomrequete" value = "polling_Mange_Alert_EventsSelect" / >
< property name = "MappingsMetaDataURL" value = "polling_Mange_Alert_Events - or - mappings.xml" / >
< property name = "PollingStrategy" value = "LogicalDeletePollingStrategy" / >
< property name = "MarkReadColumn" value = "TRANSACTION_STATUS" / >
< property name = "MarkReadValue" value = "Treatment" / >
< property name = "PollingInterval" value = "10" / >
< property name = "MaxRaiseSize" value = "5" / >
< property name = "MaxTransactionSize" value = "5" / >
< property name = "NumberOfThreads" value = "1" / >
< property name = "ReturnSingleResultSet" value = "false" / >
< property name = "MarkUnreadValue" value = "pending" / >
< / activation-spec >
< / point endpoint-activation >
< / adapter-config >
This poller process runs on the environment in clusters (2 soa nodes) and it does not work as expected in the singleton process.
Please advice to solve this problem?

I think that, in this scenario, you must use the distributed polling in the DB adapter. You can select in the voting options in the DB adapter configuration wizard.

Satellite L350-170 - recovery disk does not work

Hello

I have a L350-170 running Windows Vista home, I recently buy a Toshiba restore CD and now that it's happened, it does not work.

I put in the CD and boot from the CD drive, I can hear work and the display shows "Windows loading files" and a bar appears at the bottom of the screen, after that, the screen turns white and all I'm left with is a pointer of the mouse and a black screen.

Thank you
Jackie

Hello

Have you tested if the laptop would start using another bootable Linux Live CD, WinPE or Win XP disc?
Please check that would help determine if the problem is related to the computer laptop or recovery disk.

Please also check if the HARD drive is ok. For this test, you can use a test called Drive Fitness Test free HARD drive tool. Google for it.

However, it could also be a defective recovery disc and in this case, you should get in touch with the guys where you ordered this drive may be you need a replacement.

Vista recovery disk does not work

my recovery for a6057c disk will not work after that I used the NeoSmart
recovery disk.

After logon to Vista I see that empty office, I can access the task
Manager by CTRL - ALT_DEL.manager.

Windows and all my files are on drive D and my C is the drive has nothing on this subject now. I'd do it
I just want to make a disaster Recovery and
all over again with new factory. Does anyone have any ideas?

I now remove the prtition C on my drive.

Vista still labels the d drive, I have no C?

I found the answer on the Microsoft Knowledge Base.

Item number: 947288 primary partition drive letter designation is lost when you use WinRE to repair a GPT in Windows volume

The article is also for Vista.

Article ID: 223188 How to restore the drive letter of the system / boot in Windows

Would do the same thing.

I took the article to use regedit to swap my C & D return records.

Now windows Vista starts OK. (All I had before was just an empty office).

I also received my HP Factory disaster recovery disks it looks they will work if I need.

I'm trying to recover my Windows Vista, but one of my #2 recovery disk does not work... What can I do?

I copied 2 cd on my hard drive disk recovery & disk #2 does not work. I tried to get through the system recovery to restore the computer to its original factory shipped State. It calls into original form and content reinstalles. Then it restarts to finish and said: ERROR LOADING C:\PROGRAM FILES\WINDOWS MEDIA PLAYER\wmssetup.dll THE SPECIFIC MODULE COULD NOT BE FOUND!

THEN IT CONTINUES TO THE NEXT WINDOW WHICH SE BED:

INSTALL WINDOWS

WINDOWS COULD NOT PARSE OR PROCESS UNATTEND ANSWER FILE FOR [SPECIALIZE]. THE SPECIFIED IN THE ELEMENT OF THE RESPONSE [MICROSOFT-WINDOWS-DEPLOYMENT] FILE.

AFTER THIS WINDOW IT SAYS PRESS OK BUT MY LAPTOP DOES ME NOT LEAVE THE REST OF THE ARROW IN THE MIDDLE OF THE WINDOW & WON'T LET ME CLICK ON IT! WHAT CAN I DO TO GET THROUGH THIS PROCESS!

YOUR HELP WOULD BE GREATLY APPECIATED! THXS

Contact the computer manfacturer, who provided the original discs.

BEFORE the UPDATE of relaxation with time stamp does not work as expected

We have a scenario where I check update operations on a table.
I created a before update TRIGGER, so that every time he goes an update on the main table statement, one before the image of the lines is captured in the table of audit with timestamp.
Since it is before updating, ideally the audit table timestamp (TRG_INS_TMST) should be less main table timestamp (IBMSNAP_LOGMARKER) VALUE, I mean TRIGGER should happen before the update.
(I could understand in a way that the UPDATE statement is formulated with SYSTIMESTAMP earlier before the TRIGGER is evaluated and so UPDATE is to have a time stamp prior to TRIGGER, but this isn't what we wanted. We want PRIOR update)
```
'Table' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
---- ----------------- -------------------------------
T1   U                 13-OCT-15 03.07.01.775236 AM   <<---------- This is the main table, This should have the latest timestamp
T2   I                 13-OCT-15 03.07.01.775953 AM
```
Here is my test case.
```
DELETE FROM TEST_TRIGGER_1;

DELETE FROM TEST_TRIGGER_2;

SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
UNION
SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;

INSERT INTO TEST_TRIGGER_1 (ID,ibm_snapoperation, ibm_snaplogmarker)
     VALUES (1, 'I', SYSTIMESTAMP);

COMMIT;

SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
UNION
SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;

UPDATE TEST_TRIGGER_1
   SET IBM_SNAPOPERATION = 'U', ibm_snaplogmarker = SYSTIMESTAMP;

COMMIT;

SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
UNION
SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
```
Def trigger:
```
CREATE OR REPLACE TRIGGER etl_dbo.TEST_TRIGGER_1_TRG BEFORE UPDATE OF IBM_SNAPOPERATION
ON TEST_TRIGGER_1 REFERENCING OLD AS OLD NEW AS NEW
FOR EACH ROW
WHEN (
NEW.IBM_SNAPOPERATION= 'U'
      )
DECLARE
V_SQLCODE  VARCHAR2(3000);
--PRAGMA AUTONOMOUS_TRANSACTION;
BEGIN
INSERT INTO etl_dbo.TEST_TRIGGER_2
(ID,
IBM_SNAPOPERATION,
IBM_SNAPLOGMARKER,
TRG_INS_TMST
)
VALUES (:OLD.ID,:OLD.IBM_SNAPOPERATION,:OLD.IBM_SNAPLOGMARKER,SYSTIMESTAMP)
;
--COMMIT;
END;
/
```
Output is something like this
```
1 row deleted.
1 row deleted.
no rows selected.
1 row created.
Commit complete.

'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
---- ----------------- -------------------------------
T1   I                 13-OCT-15 03.07.00.927546 AM 
1 row selected.
1 row updated.
Commit complete.

'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
---- ----------------- -------------------------------
T1   U                 13-OCT-15 03.07.01.775236 AM   <<---------- This is the main table, This should have the latest timestamp
T2   I                 13-OCT-15 03.07.01.775953 AM 

2 rows selected.
```
But for some reason, even after the creation of the 'AFTER' trigger for update, it works as expected. Sense - the main table is not having the last timestamp given

It's OKAY - I told you in my reply earlier. Reread my answer.

could understand somehow that the UPDATE statement is made with earlier

SYSTIMESTAMP until the TRIGGER is assessed and updated so is to have

time stamp prior to the trigger, but this isn't what we wanted. We want to

BEFORE the update)

As I told you before that your UPDATE statement occurs BEFORE the trigger is activated.

Despite what the other speakers have said, it makes NO DIFFERENCE if you use a BEFORE UPDATE or an AFTER UPDATE trigger. Your UPDATE statement runs ALWAYS BEFORE the trigger.

HE has TO - it's your update processing statement that causes the trigger to fire.

Your update statement includes SYSTIMESTAMP. If during the processing of your return to update the value of SYSTIMESTAMP "at this exact time" is captured.

Then your trigger is activated and starts to run. ANY reference to SYSTIMESTAMP that you use in your trigger cannot be earlier than the value of until the trigger was executed. It's IMPOSSIBLE.

The trigger can use the SAME value by referencing: NEW and the column name you store the value. Or the trigger can get its own value that your code is doing.

But the SYSTIMESTAMP value in the trigger will NEVER earlier than the value in your query.

And none of these values can actually be used to tell when the changes are really ENGAGED since the trigger does not work and CAN NOT, to know when, or if, a validation occurs.

Reread my first answer - he explains all this.

xdoxslt:get_variable does not work as expected inside, if

Hi all
I want to compare the maximum value of an element (the name of the element - ROUND ) with other values.
So I have a loop for iteration. Inside the loop, I have an if statement to compare the values.
If the value of the element is greater than the max value, I replace the max value with the value of the element.
Here, up to 9 it works fine. But after 9, if the value of the element is 10, the comparison is not the case. The Code below does not work.
Code:
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
<? xdoxslt:set_variable($_XDOCTX,_'maxcount',_0)? >
<? for-each: Task_History_V? >
<? If: lower - case (STEP_NAME_1) = "analysis"? >
<? ROUND? > <? » ---« ? > <? xdoxslt:get_variable($_XDOCTX,_'maxcount')? >
<? If: ROUND > (xdoxslt:get_variable($_XDOCTX,_'maxcount'))? >
<? xdoxslt:set_variable($_XDOCTX,_'maxcount',_ROUND)? >
<? end if? >
<? end if? >
<? end foreach? >
<? "Max value: '? >
<? xdoxslt:get_variable($_XDOCTX,_'maxcount')? >

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Example of XML data:

< / Task_History_V > < Task_History_V >
8th < CHANNEL > < / ROUND >
Analysis of < STEP_NAME_1 > < / STEP_NAME_1 >
< TASK_STATUS_CODE > 4 < / TASK_STATUS_CODE >
< TASK_STATUS > completed < / TASK_STATUS >
< ACT_START_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_START_DATE >
< ACT_END_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_END_DATE >
< ACTUAL_EFFORT > 1.0 < / ACTUAL_EFFORT >
< / Task_History_V > < Task_History_V >
< 9th > < / ROUND >
Analysis of < STEP_NAME_1 > < / STEP_NAME_1 >
< TASK_STATUS_CODE > 4 < / TASK_STATUS_CODE >
< TASK_STATUS > completed < / TASK_STATUS >
< ACT_START_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_START_DATE >
< ACT_END_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_END_DATE >
< ACTUAL_EFFORT > 1.0 < / ACTUAL_EFFORT >
< / Task_History_V >
< Task_History_V >
10th < CHANNEL > < / ROUND >
Analysis of < STEP_NAME_1 > < / STEP_NAME_1 >
< TASK_STATUS_CODE > 4 < / TASK_STATUS_CODE >
< TASK_STATUS > completed < / TASK_STATUS >
< ACT_START_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_START_DATE >
< ACT_END_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_END_DATE >
< ACTUAL_EFFORT > 1.0 < / ACTUAL_EFFORT >
< / Task_History_V >
< Task_History_V >
< ROUND 11 > < / ROUND >
Analysis of < STEP_NAME_1 > < / STEP_NAME_1 >
< TASK_STATUS_CODE > 4 < / TASK_STATUS_CODE >
< TASK_STATUS > completed < / TASK_STATUS >
< ACT_START_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_START_DATE >
< ACT_END_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_END_DATE >
< ACTUAL_EFFORT > 1.0 < / ACTUAL_EFFORT >
< / Task_History_V >
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Expected results:
8 0
9 8
10 9
11 10

Max value:
11

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Output current:
8 0
9 8
10 9
11 9

Max value:
9
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

He would be grateful if you help me to solve this problem.
Thanks in advance.

-Hari

(xdoxslt:get_variable($_XDOCTX,_'maxcount'))? >

TO

number (xdoxslt:get_variable($_XDOCTX,_'maxcount')). >

Tecra 8000: monitor and the HARD disk does not work - does not start

I have a laptop Toshiba Tecra 8000 given to me the year last by my uncle. I live in England, but it is and bought the PC in Italy. I do not know if this causes complications, but I thought it may be useful.

Since I got it it occasionally did not display any image of all system startup, so if I have given some time and restarted it would start working again. Happening of bagan more frequently and now I can't make it work. I have conections and found that everything was in place. Then he doesn't seem to be turning on, however when I replaced the front LED cable seems to be turning on and although I couldn't hear much the CPU was luminous heat. I opened the drive and it gave once more, succeeded him and he still wouldn't start. I had purchased and replaced the screws on the heatsink around this area but I did not handle it with many other things.

So now, I have a monitor that does not work and a gard drive that won't start... Any ideas?

Thank you!

Hello

Could be either the card mother, CPU or ram. The processor when it goes bad or is not locked in place (have had this before, install the CPU but forgot to turn the lock, so he cannot move) the computer will act as its startup, don't give any error and stay on a black screen. Verify that the processor is locked in place. Then remove the ram and try a stick of RAM that runs on another computer. If you try the RAM and the processor do not always start, then chances are your motherboard is dead and must be replaced. Hope this helps and that solve you the problem.

'Ctrl + End' keyboard shortcut does not work as expected. I tried safe mode. does not move the tab to the end of such specified list, just scroll to the end of the page.

According to http://support.mozilla.com/en-us/kb/keyboard+shortcuts,.
'Ctrl + End' should move the active tab to the end of the list of tabs.

But the shortcut does not work. Only, it scrolls to the end of the current page as if only "End" is pressed.

I tried the mode without failure of firefox and closed all other open programs.

What to do to debug this problem?
or may there is a bug in firefox somehow?

See the post of dao in this MozillaZine forum thread: http://forums.mozillazine.org/viewtopic.php?f=23 & t = 1304895

Add code to userChrome.css below @namespace.

See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files
```
@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */

.tabbrowser-tab[selected="true"] {-moz-user-focus: normal !important;}
```

VI does not work as expected

Hello

I am trying to create a game but my VI does not work as I want it. IM pretty much a beginner to labview and have no idea of what's wrong with my code. Help please!

So far I've only added the 'up' and 'down' button, and I want the red square to stop a black square or otherwise follow the instructions of the button that is pressed.

I'm not entirely sure how I should go to. My trial ended a horrible failure.

Any help would be appreciated!

Thank you

1 stop using local variables. They are at the origin of the race conditions and you can use the stream for each thing. The main thing is have it your curls 'building the map' transfer data to your event loop. This includes the initialization of your shift registers...

2. make an event for your stop button.

3 place the controls to their corresponding events. This will allow the locking buttons.

4. the work on the line of things better. It will help a ton by keeping your paths easier to read.

CTRL key does not work as expected

Original title: keyboard Help!

There is a recurring issue going on with my keyboard or very probably my pc...

Well first to start with - I use a software type "ventrilo" called "mumble" that uses the 'CTRL' key as a key to talk with others in the same precedente.* *-could be a reason

My CTRL key seems really screw randomly until that moment, it turn on sticky keys [where ctrl has practically been pressed permanently] even if it is not enabled on the settings... which makes it really difficult to browse web site or use games because I'm unable to type.

Even if I try to disable it by using the two keys ctrl - it does not turn off...

When I try to copy and paste using my CTRL key left it appears just under the letter c or v when I'm trying to do, but when I do it with my right ctrl - it is successful...

* steam question *.

I use also a program called "steam" that allows me to talk with others and play some games - but the sticky keys seem to be really stuck on this issue, I am unable to do anything...

Whenever I press 'a' after that it is already used once - it will remove 2 characters: example: I type AGT-> and I press 'a' once more-> deletions G and T

or whenever I have press BACKSPACE at all during a conversation of steam, it deletes everything.

Urgent W on it also a tab or an im window closed on...

pressing V will paste what I had copied at all, and finally pressing z would substitute a letter - for example: za-> type z once more-> towers to zz

I hope you understand what I'm talking... help? Thank you...

Hello Kent,

Let us make sure that this isn't a keyboard problem. Connect a different keyboard to see if the CTRL key is working. If it works fine, then it is a problem of faulty device. You may need to replace the driver.

If this does not work on the new keyboard, then it must be a setting in the software that you have installed that is causing this problem.

As a work around, I suggest to uninstall and reinstall the drivers for the keyboard and check if this solves this problem.

1. type of Device Manager in the Start Search box and press on enter.

2. browse the keyboard.

3. right click on the mentioned keyboard driver and select Uninstall.

4. once the driver is uninstalled, restart the computer and check if the problem persists.

Note: Windows will automatically detect the keyboard and install the necessary driver via Windows updates.

See 't-working-properly#update-driver-hardware-isn't-working-properly=windows-7 http://windows.microsoft.com/en-in/windows/update-driver-hardware-isn

If the keyboard print incorrect characters, then try the steps mentioned in http://support.microsoft.com/kb/258826

I hope this helps. If you have any questions, please let us know.

defrager disk does not work as expected

Similar Questions

Maybe you are looking for