FRAGMENTATION applied on several logical Tables does NOT WORK as expected

Similar Questions

• Cannot install itunes. It installs but when I clicked on it said has not been installed correctly. I uninstalled, reinstalled several times but does not work.

  Cannot install itunes. It installs but when I clicked on it said has not been installed correctly. I uninstalled, reinstalled several times but does not work.

  Trying to download iTunes again, but instead run the installer from its current location, try saving it to your hard drive and then run the configuration file.

  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/ht1926

  iTunes for Windows Vista or Windows 7: troubleshooting...
  http://support.Apple.com/kb/ts1717

  You can try both uninstalling and reinstalling as a new user to see if that helps:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If this isn't the case, I recommend you contact Apple for assistance.

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

• Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Quit Safari, Chrome to quit smoking. If necessary Forcequit.

  Start Safari while holding the SHIFT key, select the menu Safari ClearHistory, then after this check that the homepage is the one you want.

  Do the same for Chrome.

  Close all browsers, restart the mac.

• Adapter DB of the poll as singleton process does not work as expected

  Poller DB adapater uses to control the transaction all the seconds to the downstream system and I want this poller as singleton process (an instance should be in working order at the same time).

  As suggested in the documents of the oracle, here are the settings that are configured in the composite.xml file.

  < name of service = "polling_Mange_Alert_Events."

  UI:wsdlLocation = "polling_Mange_Alert_Events.wsdl" > "

  " < interface.wsdl interface =" http://xmlns.oracle.com/pcbpel/adapter/db/Application1/int_app_manageAlerts/polling_Mange_Alert_Events#wsdl.interface(polling_Mange_Alert_Events_ptt) "/ > "

  < binding.jca config = "polling_Mange_Alert_Events_db.jca" >

  < property name = "singleton" > true < / property >

  < binding.jca >

  < name = "jca.retry.count property" type = "xs: int" much = 'false' override = "may" > 2147483647 < / property > "

  < name = "jca.retry.interval property" type = "xs: int" much = 'false' "

  Override = "may" > 1 < / property >

  < name = "jca.retry.backoff property" type = "xs: int" much = 'false' "

  Override = 'may' > 2 < / property >

  < name = "jca.retry.maxInterval property" type = "xs: String" much = 'false' "

  Override = "may" > 120 < / property >

  < / service >

  JCA file settings are:

  < name of the adapter-config = "polling_Mange_Alert_Events" = 'Database adapter' adapter wsdlLocation = "polling_Mange_Alert_Events.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">

  < connection-factory location = ' ist/DB/vff-int-was"UIConnectionName ="PT_APPINFRA"adapterRef =" "/ >

  < endpoint-activation portType operation "polling_Mange_Alert_Events_ptt" = "receive" = >

  < className = "oracle.tip.adapter.db.DBActivationSpec activation-spec" >

  < property name = value = "polling_Mange_Alert_Events.ManageAlertEvents" / "DescriptorName" >

  < property name = "Nomrequete" value = "polling_Mange_Alert_EventsSelect" / >

  < property name = "MappingsMetaDataURL" value = "polling_Mange_Alert_Events - or - mappings.xml" / >

  < property name = "PollingStrategy" value = "LogicalDeletePollingStrategy" / >

  < property name = "MarkReadColumn" value = "TRANSACTION_STATUS" / >

  < property name = "MarkReadValue" value = "Treatment" / >

  < property name = "PollingInterval" value = "10" / >

  < property name = "MaxRaiseSize" value = "5" / >

  < property name = "MaxTransactionSize" value = "5" / >

  < property name = "NumberOfThreads" value = "1" / >

  < property name = "ReturnSingleResultSet" value = "false" / >

  < property name = "MarkUnreadValue" value = "pending" / >

  < / activation-spec >

  < / point endpoint-activation >

  < / adapter-config >

  This poller process runs on the environment in clusters (2 soa nodes) and it does not work as expected in the singleton process.

  Please advice to solve this problem?

  I think that, in this scenario, you must use the distributed polling in the DB adapter. You can select in the voting options in the DB adapter configuration wizard.

• Panel request ADF with Table does not work

  I am simple search.jsf of JSF page. In the search.jsf , I have an ADF search form. I drag and drop the view criteria into the Panel Query ADF with Table. The user search result will be displayed in a table ADF. The View object is simple no LOVs no variable binding even no where clause.

  
  

  
  

  Everything works fine if I run the page separately not with in the workflow. But if I turn the page with in a workflow, the search engine does not work.

  The workflow structure is simple, it has towed home.jsf and search.jsf pages and there is a control of navigation of the home page to the Search page. The problem is that the search engine is not work IE when I press the default search key that doesn't come with the form no coming on the data table.,.

  
  

  I use Jdeveloper with ADF technology 11.1.2.3
  

  My God, what a ridiculous and foolish.

  Partial trigger is missing.

  I have to add the id of the request to the partial trigger on the table. I thought that his coming by default to search forum.

  What a waste of time...

• the tables does not work in flash lite

  I couldn't get a multidimensional array to work in flash lite, then tried a regular table - is not no longer works.
  
  Copy the following code works:
  
  var myVar;
  myVar = 5;
  answer_true_button_btn.onPress = function() {}
  points_txt. Text = String (myVar);
  };
  
  This code does not work:
  
  var myVar:Array = new Array (5);
  myVar [0] = 5;
  answer_true_button_btn.onPress = function() {}
  points_txt. Text = String (myVar [0]);
  };
  
  Now do multidimensional arrays.
  
  I tried in Flash Lite 2 and 2.1.

  Here's the problem: I had 1 selected ActionScript (even if Flash Lite 2.1 has been selected in the box 'Version') in the publication settings. Apparently, you write in AS 1 or 2 AS and publish in Flash Lite x.x.

  Flash Lite 1.1 does not support tables, with the exception of the latest version.

• My computer sometimes suddenly restart after disk defragmentation and applied restore.it system still does not work. Can someone help me? : ()

  I need help on my computer, it's a window Vista Home Basic. Sometimes my computer rebooted or encountered problem blue screen. Is it related to my anti virus program or any hardware or software failure? I try to solve it, Defrag disk and system restore, but it still does not work.

  Do you have an antivirus installed? Otherwise download, update and scan with this

  http://www.Microsoft.com/security_essentials/

  Follow these steps

  http://support.Microsoft.com/kb/929135

  and this

  1. Open an elevated command prompt. To do this, click Start, click principally made programs,Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  Type the following command and press ENTER:

  sfc/scannow

  http://support.Microsoft.com/kb/929833
  http://www.howtogeek.com/HOWTO/Windows-Vista/verify-the-integrity-of-Windows-Vista-system-files/

• BEFORE the UPDATE of relaxation with time stamp does not work as expected

  We have a scenario where I check update operations on a table.

  I created a before update TRIGGER, so that every time he goes an update on the main table statement, one before the image of the lines is captured in the table of audit with timestamp.

  Since it is before updating, ideally the audit table timestamp (TRG_INS_TMST) should be less main table timestamp (IBMSNAP_LOGMARKER) VALUE, I mean TRIGGER should happen before the update.

  (I could understand in a way that the UPDATE statement is formulated with SYSTIMESTAMP earlier before the TRIGGER is evaluated and so UPDATE is to have a time stamp prior to TRIGGER, but this isn't what we wanted. We want PRIOR update)

  'Table' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   U                 13-OCT-15 03.07.01.775236 AM   <<---------- This is the main table, This should have the latest timestamp
  T2   I                 13-OCT-15 03.07.01.775953 AM
  

  Here is my test case.

  DELETE FROM TEST_TRIGGER_1;
  
  DELETE FROM TEST_TRIGGER_2;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  
  INSERT INTO TEST_TRIGGER_1 (ID,ibm_snapoperation, ibm_snaplogmarker)
       VALUES (1, 'I', SYSTIMESTAMP);
  
  COMMIT;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  
  UPDATE TEST_TRIGGER_1
     SET IBM_SNAPOPERATION = 'U', ibm_snaplogmarker = SYSTIMESTAMP;
  
  COMMIT;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  

  Def trigger:

  CREATE OR REPLACE TRIGGER etl_dbo.TEST_TRIGGER_1_TRG BEFORE UPDATE OF IBM_SNAPOPERATION
  ON TEST_TRIGGER_1 REFERENCING OLD AS OLD NEW AS NEW
  FOR EACH ROW
  WHEN (
  NEW.IBM_SNAPOPERATION= 'U'
        )
  DECLARE
  V_SQLCODE  VARCHAR2(3000);
  --PRAGMA AUTONOMOUS_TRANSACTION;
  BEGIN
  INSERT INTO etl_dbo.TEST_TRIGGER_2
  (ID,
  IBM_SNAPOPERATION,
  IBM_SNAPLOGMARKER,
  TRG_INS_TMST
  )
  VALUES (:OLD.ID,:OLD.IBM_SNAPOPERATION,:OLD.IBM_SNAPLOGMARKER,SYSTIMESTAMP)
  ;
  --COMMIT;
  END;
  /
  

  Output is something like this

  1 row deleted.
  1 row deleted.
  no rows selected.
  1 row created.
  Commit complete.
  
  'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   I                 13-OCT-15 03.07.00.927546 AM 
  1 row selected.
  1 row updated.
  Commit complete.
  
  'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   U                 13-OCT-15 03.07.01.775236 AM   <<---------- This is the main table, This should have the latest timestamp
  T2   I                 13-OCT-15 03.07.01.775953 AM 
  
  2 rows selected.
  

  But for some reason, even after the creation of the 'AFTER' trigger for update, it works as expected. Sense - the main table is not having the last timestamp given

  It's OKAY - I told you in my reply earlier. Reread my answer.

  could understand somehow that the UPDATE statement is made with earlier

  SYSTIMESTAMP until the TRIGGER is assessed and updated so is to have

  time stamp prior to the trigger, but this isn't what we wanted. We want to

  BEFORE the update)

  As I told you before that your UPDATE statement occurs BEFORE the trigger is activated.

  Despite what the other speakers have said, it makes NO DIFFERENCE if you use a BEFORE UPDATE or an AFTER UPDATE trigger. Your UPDATE statement runs ALWAYS BEFORE the trigger.

  HE has TO - it's your update processing statement that causes the trigger to fire.

  Your update statement includes SYSTIMESTAMP. If during the processing of your return to update the value of SYSTIMESTAMP "at this exact time" is captured.

  Then your trigger is activated and starts to run. ANY reference to SYSTIMESTAMP that you use in your trigger cannot be earlier than the value of until the trigger was executed. It's IMPOSSIBLE.

  The trigger can use the SAME value by referencing: NEW and the column name you store the value. Or the trigger can get its own value that your code is doing.

  But the SYSTIMESTAMP value in the trigger will NEVER earlier than the value in your query.

  And none of these values can actually be used to tell when the changes are really ENGAGED since the trigger does not work and CAN NOT, to know when, or if, a validation occurs.

  Reread my first answer - he explains all this.

• 'Ctrl + End' keyboard shortcut does not work as expected. I tried safe mode. does not move the tab to the end of such specified list, just scroll to the end of the page.

  According to http://support.mozilla.com/en-us/kb/keyboard+shortcuts,.
  'Ctrl + End' should move the active tab to the end of the list of tabs.

  But the shortcut does not work. Only, it scrolls to the end of the current page as if only "End" is pressed.

  I tried the mode without failure of firefox and closed all other open programs.

  What to do to debug this problem?
  or may there is a bug in firefox somehow?

  See the post of dao in this MozillaZine forum thread: http://forums.mozillazine.org/viewtopic.php?f=23 & t = 1304895

  Add code to userChrome.css below @namespace.

  See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  .tabbrowser-tab[selected="true"] {-moz-user-focus: normal !important;}
  

• VI does not work as expected

  Hello

  I am trying to create a game but my VI does not work as I want it. IM pretty much a beginner to labview and have no idea of what's wrong with my code. Help please!

  So far I've only added the 'up' and 'down' button, and I want the red square to stop a black square or otherwise follow the instructions of the button that is pressed.

  I'm not entirely sure how I should go to. My trial ended a horrible failure.

  Any help would be appreciated!

  Thank you

  1 stop using local variables.  They are at the origin of the race conditions and you can use the stream for each thing.  The main thing is have it your curls 'building the map' transfer data to your event loop.  This includes the initialization of your shift registers...

  2. make an event for your stop button.

  3 place the controls to their corresponding events.  This will allow the locking buttons.

  4. the work on the line of things better.  It will help a ton by keeping your paths easier to read.

• defrager disk does not work as expected

  I tried to program the defrager drive to run on a schedule and it confirms that it is now a calendar but it does not work on the scheduled date and time. As a result, I have to manually defragment. Thanks in advance

  Try this:

  Start > Type, Services > click Services > Scroll to drive Derfragmenter > left click, properties > list drop-down list, the automatic value or delayed automatic

• CTRL key does not work as expected

  Original title: keyboard Help!
   
  There is a recurring issue going on with my keyboard or very probably my pc...
  Well first to start with - I use a software type "ventrilo" called "mumble" that uses the 'CTRL' key as a key to talk with others in the same precedente.* *-could be a reason
  My CTRL key seems really screw randomly until that moment, it turn on sticky keys [where ctrl has practically been pressed permanently] even if it is not enabled on the settings... which makes it really difficult to browse web site or use games because I'm unable to type.
  Even if I try to disable it by using the two keys ctrl - it does not turn off...
  When I try to copy and paste using my CTRL key left it appears just under the letter c or v when I'm trying to do, but when I do it with my right ctrl - it is successful...
  * steam question *.
  I use also a program called "steam" that allows me to talk with others and play some games - but the sticky keys seem to be really stuck on this issue, I am unable to do anything...
  Whenever I press 'a' after that it is already used once - it will remove 2 characters: example: I type AGT-> and I press 'a' once more-> deletions G and T
  or whenever I have press BACKSPACE at all during a conversation of steam, it deletes everything.
  Urgent W on it also a tab or an im window closed on...
  pressing V will paste what I had copied at all, and finally pressing z would substitute a letter - for example: za-> type z once more-> towers to zz
  I hope you understand what I'm talking... help? Thank you...

  Hello Kent,

  Let us make sure that this isn't a keyboard problem. Connect a different keyboard to see if the CTRL key is working.  If it works fine, then it is a problem of faulty device. You may need to replace the driver.

  If this does not work on the new keyboard, then it must be a setting in the software that you have installed that is causing this problem.

  As a work around, I suggest to uninstall and reinstall the drivers for the keyboard and check if this solves this problem.

  1. type of Device Manager in the Start Search box and press on enter.

  2. browse the keyboard.

  3. right click on the mentioned keyboard driver and select Uninstall.

  4. once the driver is uninstalled, restart the computer and check if the problem persists.

  Note: Windows will automatically detect the keyboard and install the necessary driver via Windows updates.

  See 't-working-properly#update-driver-hardware-isn't-working-properly=windows-7 http://windows.microsoft.com/en-in/windows/update-driver-hardware-isn

  If the keyboard print incorrect characters, then try the steps mentioned in http://support.microsoft.com/kb/258826

  I hope this helps. If you have any questions, please let us know.

• ACS 5.2 - accounts User File Update does not work as expected

  Hello, I have a serious problem with the import of the fixed IP addresses to user accounts in ACS 5.2.

  Because this attribute cannot be migrated directly I try via "file operations--> update". I created the file update model, but entered IP addresses aren't imported - all other attributes can be changed without problem.

  If I try to "Add file operations-->" it works well, but I can't use this option.

  IPv4 address attribute in 'System Administration--> Configuration--> dictionaries--> identity--> internal users' is added correctly and appropriate field is not in user accounts.

  Do you have any idea what can be wrong?

  Hi Michal,

  Yes I submitted this as a bug recently. Sometimes after a migration from ACS 4.

  CSCtk05027 : custom fields for users after migration - import/update does not work

  Try to change one of your user input. Just add an IP manually it for example. Then do the update. She will work for this user, and it will update the ip address.

  The solution is to export all users of your DCC 5. Then remove it from the database and then to make an import file 'Add' instead of update. A bit of a silly workaround but the bug should be fixed in future patches (no information on that yet).

  Kind regards

  Nicolas

  ===

  Remember responses of the rate that you find useful

• xdoxslt:get_variable does not work as expected inside, if

  Hi all

  I want to compare the maximum value of an element (the name of the element - ROUND ) with other values.

  So I have a loop for iteration. Inside the loop, I have an if statement to compare the values.

  If the value of the element is greater than the max value, I replace the max value with the value of the element.

  Here, up to 9 it works fine. But after 9, if the value of the element is 10, the comparison is not the case. The Code below does not work.

  Code:

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  <? xdoxslt:set_variable($_XDOCTX,_'maxcount',_0)? >

  <? for-each: Task_History_V? >

  <? If: lower - case (STEP_NAME_1) = "analysis"? >

  <? ROUND? > <? » ---« ? > <? xdoxslt:get_variable($_XDOCTX,_'maxcount')? >

  <? If: ROUND > (xdoxslt:get_variable($_XDOCTX,_'maxcount'))? >

  <? xdoxslt:set_variable($_XDOCTX,_'maxcount',_ROUND)? >

  <? end if? >

  <? end if? >

  <? end foreach? >

  <? "Max value: '? >

  <? xdoxslt:get_variable($_XDOCTX,_'maxcount')? >

  
  

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  
  

  Example of XML data:

  
  

  < / Task_History_V > < Task_History_V >

  8th < CHANNEL > < / ROUND >

  Analysis of < STEP_NAME_1 > < / STEP_NAME_1 >

  < TASK_STATUS_CODE > 4 < / TASK_STATUS_CODE >

  < TASK_STATUS > completed < / TASK_STATUS >

  < ACT_START_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_START_DATE >

  < ACT_END_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_END_DATE >

  < ACTUAL_EFFORT > 1.0 < / ACTUAL_EFFORT >

  < / Task_History_V > < Task_History_V >

  < 9th > < / ROUND >

  Analysis of < STEP_NAME_1 > < / STEP_NAME_1 >

  < TASK_STATUS_CODE > 4 < / TASK_STATUS_CODE >

  < TASK_STATUS > completed < / TASK_STATUS >

  < ACT_START_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_START_DATE >

  < ACT_END_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_END_DATE >

  < ACTUAL_EFFORT > 1.0 < / ACTUAL_EFFORT >

  < / Task_History_V >

  < Task_History_V >

  10th < CHANNEL > < / ROUND >

  Analysis of < STEP_NAME_1 > < / STEP_NAME_1 >

  < TASK_STATUS_CODE > 4 < / TASK_STATUS_CODE >

  < TASK_STATUS > completed < / TASK_STATUS >

  < ACT_START_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_START_DATE >

  < ACT_END_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_END_DATE >

  < ACTUAL_EFFORT > 1.0 < / ACTUAL_EFFORT >

  < / Task_History_V >

  < Task_History_V >

  < ROUND 11 > < / ROUND >

  Analysis of < STEP_NAME_1 > < / STEP_NAME_1 >

  < TASK_STATUS_CODE > 4 < / TASK_STATUS_CODE >

  < TASK_STATUS > completed < / TASK_STATUS >

  < ACT_START_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_START_DATE >

  < ACT_END_DATE > 2014-11-12T 00: 00:00.000 - 06:00 < / ACT_END_DATE >

  < ACTUAL_EFFORT > 1.0 < / ACTUAL_EFFORT >

  < / Task_History_V >

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  

  Expected results:

  8 0

  9 8

  10 9

  11 10

  
  

  Max value:

  11

  
  

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  
  

  Output current:

  8 0

  9 8

  10 9

  11 9

  
  

  Max value:

  9

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  
  

  
  

  He would be grateful if you help me to solve this problem.

  Thanks in advance.

  
  

  -Hari
  

  (xdoxslt:get_variable($_XDOCTX,_'maxcount'))? >

  TO

  number (xdoxslt:get_variable($_XDOCTX,_'maxcount')). >

• Server.findForType () does not work as expected

  Hi all,

  I have problem with finding vApps using the Server.findForType () method.

  Lets start from the beginning...

  Goal is to produce streams of work that could be called from outside using SOAP (SOAP is unfortunately obligatory). Portal that will call worlflows is underway of another people.

  They said a number of input and output parameters that workflows must accept and provide.

  I have test with vCenter Orchestrator environment, Director and everything works fine.

  SOAP host is created in Orchestrator using the build workflow (attached configuration - SOAP_Host_Configuration.rtf).

  I use SOAP UI to test the portal > communication Orchestrator.

  I am able to call using SOAP UI workflows.

  I am producing a simple workflow what powers on TIME using the string as an input parameter and who would return the same data as output parameter - VAPP UUID, ID, href, or anything that is considered VAPP unique brand.

  Out of SOAP UI of my VAPP is attached (SOAP_UI_vApp_Info.txt).

  If I try to use Server.findForType () it only works if I specify it like this:

  Server.findForType ("vCloud:VApp", "8265a03471add63d97f36c52e86fba8cebade2a3ca7bfcb4cb58cdff9ae9f8c / / /https://172.16.140.215/api/vApp/vapp-c7b33a3e-2174-465d-a4f2-0fa9663dc75d");

  and it does not work if if specify like this

  Server.findForType ("vCloud:VApp", "urn: vcloud:vapp:c7b33a3e - 2174-465 d-a4f2-0fa9663dc75d");

  In this case I get error:

  [21:49:35.911 2014-08-10] [I] Server error: ch.dunes.model.sdk.SDKFinderException: cannot perform the operation ' find (' TIME ',' urn: vcloud:vapp:c7b33a3e - 2174-465 d-a4f2-0fa9663dc75d') ' on the plugin "vCloud".

  Problem is that data "8265a03471add63d97f36c52e86fba8cebade2a3ca7bfcb4cb58cdff9ae9f8c / / / . https://172.16.140.215/API/vApp/vApp-c7b33a3e-2174-465D-a4f2-0fa9663dc75d "cannot be retrieved afterwords and be used as a unique identifier VAPP - vapp.dunesId returns nothing. "

  I use:

  vCenter 5.5.0 1623101

  vCO 5.5.1. 1617127

  vCloud Director 5.5.1 1753992

  vCloud Director Plugin 5.5.0.1894135

  vCenter Plugin 5.5.2.1869849

  Thank you very much for the help.

  Goran

  Of course, no problem. I found even a better way to retrieve by ID directly.

  Ex:

  vApp = host.getEntityById ("PPPV", "urn: vcloud:vapp:65a4db36-8efa-4512-afb5-7d663c13e2be");

  Kind regards

  ALEKS