Delay in VOIP in WinXP VM programs

Similar Questions

• Why Windows 8 have a long delay before the launch of startup programs

  In Windows 8 there is a long enough period for the launch of the programs in the startup folder or in the register as startup items. Why is this? And how can I remove or reduce the delay? Please note that this is not a problem with too many programs trying to launch. There is that one program listed on startup with a new installation of Windows 8 and the system is running on an SSD. It's so clear and deliberate, time not only a slow system.

  Reading this thread, I just want to point that Microsoft quality replies here, it's horrible, beyond and Microsoft should be embarrassed to make them like that in public. I recommend delete them all and by publishing an adequate solution.

  Reminder: The OP says that he is a clean install. They moved just a program in the startup folder and they're asking why - this delay, indicating precisely is not a slow computer. The advice they get is:

  -Run the diagnostic system

  -Start in Safe Mode

  Hello? This is a clean install! Of course, none of this assistance.

  What actually happened is that there is, as the OP stated, before advisement in Windows 8 delay as all the start-up programs are executed.

  It can be flown in the key HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Serialize\Startupdelayinmsec in the registry (including the set to 0, then the programs are executed immediately).

  It is the response that should come from Microsoft. Everything else is a rubbish - model answers that everyone make Microsoft look green, as if they a) don't know their own product and b) don't care even clients who need assistance.

  The Bing team should also be ashamed of this site as their best result. Google does not work.

• What are the REQUIRED winxp startup programs?

  I want to remove more utilities not required for startup speed.

  You ask about the programs under the msconfig Startup tab?  Windows XP itself requires none.  Your application (especially antivirus and security) programs and devices could, however.

• USB-6289 DAQmx delay early in the program

  Hello! Anyone help me with this problem.
  I have a new data acquisition is USB-6289.
  I'm only looking for I multiply by a decimal factor, after putting this result on AUG.
  for example
  AO0 ai0 * x =
  I want to do in continuous mode and in real time, with minimum delay. When I start the program, I have a time delay which varies.
  How can I measure this delay time?
  Anyone have an example of program to do (a simple multiplication in real time) and check where I have my mistakes.

  Thank you very much.
  Jonathan

  I put my program and a few cards of my oscilloscope (ai0-signal ao0 drop signal)

  Hi Jonathan.

  The code that you downloaded was not in parallel. Flat sequence structure forces the process to the AO HAVE to wait for the update panel. You can use the "Acquisition and recording of data" model to Create... Project for a reference on how to separate the update of the user interface of the real transformation.

  However, you must keep in mind that it is not possible to "simply to acquire a signal, multiply it and transmit" with DAQ hardware. This is because you must proceed as follows to get a signal and send it through the AO:

  1 acquire the signal in the DAQ card.

  2 send the signal to the computer via USB.

  3. ask the OS and LabVIEW process the signal to multiply.

  4. send the signal via USB in data acquisition.

  5. the output signal.

  This means that, while you can probably reduce the delay, you will always have this delay in the order of milliseconds. If you really need a shorter delay, you have a few options:

  (1) I noticed that the signal you're reading seems to be periodic. If it is a periodic signal, you can enable the regeneration in the AO and drastically reduce the delay, like the acquisition of data will just get the waveform periodical and cycle it. However, if the waveform changes, you will have some glitching.

  (2) use a multiplier circuit separated instead of data acquisition.

  (3) use a FPGA or RIO device instead of data acquisition.

  I hope this helps.

• super slow old laptop with too many startup programs

  RUNNING XP ON AN OLD LAPTOP WHICH IS REALLY SLOW, HOW CAN I DELAY OR SAFELY REMOVE EXCESSIVE STARTUP PROGRAMS

  Follow the tips below and also answer the following questions: brand and model of the pc, current antivirus, operating system and service pack.

  Stanley Zhang tips

  Will probably want to clean this machine...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  ·                                 MalwareBytes (FREE)

  ·                                 SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

• I deleted the audio program IDT Help!

  Well, I was looking through my programs because my computer cant even run videos youtube 240 p definition without delay when I saw this audio program and he took for something I had downloaded it does anyone know how I could get back or something to help?

  Hello

  Please visit www.hp.com/in and click on support & drivers > drivers & software > type the full model of your PC as the 6100 dv6 dv6-3100 etc... Select your computer model (if the list), or model CTO (for example, dv6-6100 CTO) (who works for the series) now select the operating system you are running. you have the list of drivers for your PC.

  I hope this can help, good luck!

• Delays to stop

  I have a problem on Windows 7 shutdown, a background program is causing a delay, how I can identfiy what program is responsible for?

  Do not press the power button to turn off the computer or to solve a gel. Click on the ORB at the bottom left of the desktop and click stop. If you are having shutdown problems, then select the hotkey Ctrl + Shift + Esc to bring up the Task Manager and click the Applications place the cursor on a running application to select and click on the end task button. As the application is removed from the list, repeat the procedure on the next application in the list until all are gone from the list. If you use the taskbar to access programs simply close all open windows. Then, you should be able to shut down your computer.

  http://Windows.Microsoft.com/en-in/Windows7/turning-off-your-computer-properly

• The main program is seen as a separate thread?

  I tried to stop a GUI based program opening too fast because the splash screen has not been seen for a long time enough.
  
  So I tried to use the classes Thread and can be walked in the GUI Builder.
  Trying different things, I got it to do what I wanted: a delay of 10 seconds before the GUI of the program display.
  But I don't understand why main is not considered a separate thread and continue to get visible regardless of the status of delayThread.
  

  // Constructor:
  // ---------------
  public Hotel (int numberIn)
      {
           // Create the time delay thread so that users may enjoy the splash !
           delayThread = new Thread(this);
           delayThread.run();
           // Initialise the number of rooms and the GuestList :        
          noOfRooms =  numberIn;
          guests  = new GuestList(noOfRooms); 
          // Graphics settings:      
          setTitle("Hotel");     
          setLayout(new FlowLayout());
         // etc. etc.
         // etc. etc.
         setVisible(true);
     }
  
  
      // A run method to delay the program opening:
       
      public void run()
      {     
           try
           {
                delayThread.sleep(10000);
           }
           catch(InterruptedException ie)
           {
                ie.printStackTrace();
           }
         
      }

  Now, maybe a better way to do would be to go the setVisible of the manufacturer, the run method statement.
  Maybe there's something even better to produce a delay in the opening of the program.
  But I'm still curious why the main thread has been delayed by a delay in what is really a completely separate topic.
  Any ideas?
  
  Published by: KonTiki on February 16, 2013 13:10
  
  Published by: KonTiki on February 16, 2013 13:19
  
  Published by: KonTiki on February 16, 2013 13:20
  
  Published by: KonTiki on February 16, 2013 13:21
  
  Published by: KonTiki on February 17, 2013 09:16

  Are you sure that show you all the relevant code? I think that, as is the case, the thread in sleep does nothing.

• DeskJet 3632: Envelope printing HP Deskjet 3632 problem

  Recently purchased Deskjet 3632 printer and can't print envelopes with my Hallmark Card Studio 2016.     Whenever I try to print one, I get the error message that the EWS does not approve the size of paper in the printer and the format selected on the computer.  On previous HP printers the envelope A9 size is listed, but when I go to EWS, all what I can choose is sizes small and med-large envelopes.  Please give me a hint on what to try next.  TKS

  Sorry for the delay.  Same result with other programs...  The problem seems to be that the letter formats or displayed envelope for the printer does not display an envelope A9.  Hope that someone could tell me how to do to work "around" this omission of sizes listed for the printer or HP somehow get to change the registered envelope size.  Don't think - guess purchase another print can be the only route to take.  I'll check other brands to see what they can do.  After many years called

  quit unexpectedly for HP printers.  Thanks for your help.

• High Svchhost with starting the computer.

  There are also long 40 minutes for the computer to calm down after that SVCHHOST in the Task Manager is caused a delay.  This occurs when several programs are open as well.

  When there is a svchost.exe process that seems to run amok, I always first suspect malware.

  This is because some malware may disguise himself as a svchost process, or it can hide 'behind' one of your svchost process because he knows that you won't be able to see it in the Task Manager.  There are often many other processes and Services running behind these multiple svchost.exe process see you in the Task Manager and one of them could be malicious software.

  You should say something about your system and then run some scans to try to be reasonably sure that your system is not afflicted with malicious software:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Download and run Hitman Pro (hitmanpro) here and during installation to be 100% sure to refuse the installation of toolbars, decline any e-mail options, nothing to do with Bing or MSN, perform a scan time, accept no e-mail and activate the free license:
  http://www.SurfRight.nl/en/downloads/ (make sure you get the free version)

  Download and run TDSSKiller from Kaspersky:

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  No matter what you use for malware protection, follow these steps:

  Discover, download and run rkill.exe from here (do not restart after running rkill):

  http://www.bleepingcomputer.com/download/rkill/

  Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:
  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

• Break in NI 7344 noon of the movement

  Hello

  Normal 0 false false false MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} "}

  I would like to know how to implement ' 0 line speed"for a few seconds in the motion controller 7344. In other words how to implement Pause / hold between a 1-axis motion. Flex_blend method is to use for the query.

  What is the use of flex_load_delay is useful reach the requirement.

  Kind regards

  Renjith.

  Renjith,

  flex_load_delay() adds a delay to the execution of a program on board, but he break a move, is not the valid function for your purpose. To interrupt the execution of a move, I suggest to use flex_load_velocity_override(). This feature allows you to vary the set speed of moving between 0% and 100% when running. Defining the replacement value at 0% actually stops the movement, while reset to 100% back the move.

  I hope this helps.

  Jochen Klier

  National Instruments

• scrolling is slow and intermittent

  When I SCROLL UP OR DOWN USING THE MOUSE THE MOVEMENT OF THE SCROLL BAR IS SLOW AND DELAYED

  This happens with all programs?

  For Internet Explorer, try this:

  Click Tools > Internet options > advanced. Scroll down the page until you find the setting "Use smooth scrolling" end of section "Navigation". If there is a check mark in the box, uncheck the box.

• Icons displayed incorrectly at startup, the computer is unusable for several minutes

  My computer is less than a year, I'm running Windows 7 Professional, and for several weeks my computer acted strangely. When I turn on the screen displays properly, however some or all (it seems to change every time) of my icons appear as these things white paper folded. It continues for several minutes during which I can't run any programs, but I can use my mouse pointer and the loading symbol when I move the taskbar. After a 5-10 minutes (I've not timed, but it might be compatible), the icons to revert to the normal and my computer seems to work perfectly well. Any idea what the problem might be?

  When a Windows computer starts in place, some of the non-Windows installed on the computer programs also starts alongwith. In your case, it seems that some of these startup programs is responsible for the delay. You can disable startup programs and services non-Windows on the computer by placing the computer in what is called a "Clean-boot". If the problem does not appear in the clean boot state, you can track Windows service start defective or not programme following a policy of division and conquere.

  This process takes a little time. I would say by following the instructions in the following article to diagnose the problem:

  http://support.Microsoft.com/kb/929135

• text missing Start menu missing, 10 to 20 minutes to boot windows, Explorer just started...

  something happened, it was just an ordinary day, I played some games, went to the internet, and then everything started late, hanging chrome, hanged Explorer, I started the security options to start the Task Manager, and then everything went totally to *. prepare security hanged options... I did a reboot, as it was the only thing I could do, computer hang in the balance sheet, I turned off the pc, he turned his back and "launch Startup Repair tool" appeared, I tried to start windows normally, it hung on the boot animation, I rebooted and started the repair, he was running for 45 minutes and he said that no problem not found I tried to do a system restore, but there is no point of restoration... then it starts fine, but always had been delayed as *, I uninstalled a few programs (trying to solve the gap) and among them was custopack (icon, start menu, taskbar visual mod), he had to restart, after it restarts, there was something weird to the logon screen... There was no text at all, after I logged the icons were not their names slot, there was absolutely no text anywhere, not even the date and the hour menu start did not work, security options were just a huge empty button (lock this pc I discovered), I looked around and discovered that perhaps it could be solved with the sfc/scannow , but he only said "Windows Resource Protection has not found any breach of integrity" so that the wrong, again, the pc has no text and hangs at the boot animation after that 30-minute recovery scan occurs with absolutely no result, and now im stuck here in this loop...... so I need help, I can't reinstall windows because I have important documents on my windows partition (office and others), and I saw that such a thing could be caused by malicious software, but of course I can't scan because I don't have the text on the buttons to her im like guess blind then How can I get the text, the start menu and everything back to normal?

  question 2 years ago, but in any case, the problem was that the hard drive has not to the point where he just died...

• Since CS5.0 to CS5.5 update worth it?

  If I could get the Stablizer Warp to work on some of my most difficult shots, I would pay probably the $179 for a upgrade to After Effects.   It is the cost of a good plugin.

  
  But first?  I don't really see "What's new?" features makes me crazy... In fact, I really don't care about them at all.

  BUT I care about the speed and stability.  I was spending the money if he did my job much more quickly.

  CS5.5 is shot down on response times?   Right now in CS5 everything is great until my project becomes big, then it starts to become much slower to jump from Windows/all return to first.  He delayed 5-10 seconds until the program is available.  And of course with a lot of dynamic linking, goes to a tweat minor EI and come back to see it in first can become love if it takes 10 seconds each time.

  I also have the slow response time from where I support on both play the video playback.  Not at first, but after the project developed.

  Don't CS5.5 address this at all?

  Running at the same time? Do you mean installed simultaneously, or actually open and functional? Installed, Yes... and open... Yes. But work? Hmm... I guess, but it's going to be enough multitasking on the system, to the point where you would probably see significantly lower performance in both. And really - to be honest - how much work you're going to go down in two programs at the same time?

  Here it is; CS5 on the right, CS5.5 left!

  

  No way in hell I would want to work like this it's probably doable, but really, I wouldn't jeopardize the stability of a single application, because I thought that I would be more productive thanks to two