Delayed reactions

Similar Questions

• Flex 4 - resize problem - delayed reaction

  I'm having a problem using the effect of resizing on my spark Panel. I want to resize the height of my Panel and the transition to another State to display when the user clicks a button. The problem occurs when the effect of resizing tries to shoot. The resizing of the Panel is delayed and Florence. It seems almost properly load the elements of the new view state before the effect can run. I have attached a screenshot to illistrate how my application is supposed to act.

  Does anyone know if there is a way to solve this problem? I use Flash Builder 4 with the SDK 4.1.

  

  If there is an equivalent of the spark of a mx component so I advise to use it.  Flex 4.1 with no spark form its fine to stick with mx:Form for now.

  I have the feeling that you run into a bug similar to this: http://bugs.adobe.com/jira/browse/SDK-28787

  That the solution was to use the spark form (introduced in Flex 4.5)

• Issues related to the delay in the launch of active emails

  My question is about having email open and then drop the screen in the bar of tasks for maybe an hour: when I bring e-mail back-up, it often takes about two or three minutes to become his fully active again. Can someone help me understand what's happen with this delayed reaction?

  I am running: windows 7, 32 bit, ram of 4 G, the Inspiron 1721.

  Thanks, GregCY

  You didn't mention what email program you use.

• New installation of Xubuntu w / Firefox on my PC. Everything works VERY slowly, even typing and cursor movement. Is - fixable?

  With this new installation of Xubuntu (which is supposed to be quick enough) with Firefox included, all transactions processed through the browser are incredibly slow: typing, go to other pages or Web sites; move the cursor is painfully slow, and sticky with time delayed reaction and excessive results. I have the maximum encryption and security; This could be the problem? Note: I noticed that type in this window is normal...? E-mail is correct, also.

  Thank you very much
  Bob

  Glad your problem is solved itself, and I see that you have also your problem another (1012424/questions/1012424). Don't forget to update Firefox, it should be 31 Firefox now or if Xubuntu is a bit behind perhaps still Fx30 but certainly not Fx28.

  Be aware that you will see big changes in Firefox

  • Learn more about the design of the new Firefox version 29
  • https://www.Mozilla.org/en-us/Firefox/tour/

  You mentioned

  why would they include an unsupported version of Firefox in the same package with the newest version of an operating system?
  

  Ubuntu and Xubuntu major versions come out every six months. Firefox updates every six weeks. Probably the first thing to do after you have installed a new version of X / Ubuntu is updated the software, also immediately before the upgrade to the next Xubuntu.

  Versions of Firefox & Ubuntu/Xubuntu

  I use Ubuntu 12.04 LTS for most. 14.04 is also LTS, so you have to stay on that instead of update in due course to 14.10

  • Pretty graph http://en.wikipedia.org/wiki/Ubuntu_versions#Table_of_versions

  I use their distro Canon of construction of Firefox since their deposit of Aurora. Who is behind Mozilla versions datewise (I also installed mozilla versions), but it uses the package manager, so no need for manual updates of Firefox. You probably don't want or need to do that, but if you do not want to install this as a browser extra is available for 12.04 & 14.04 of

  • https://Launchpad.NET/~Ubuntu-Mozilla-daily/+archive/Ubuntu/Firefox-Aurora
  • If you are interested by sets it Mozilla see
    Installing Firefox on Linux
    & https://help.ubuntu.com/community/FirefoxNewVersion

  Synaptic (graphical APT front-end server) package manager is therefore longer in default distributions of Ubuntu/Xubuntu, you could add Synaptic (included in gDebi in Xubuntu 12.04) otherwise use the "Software Center" to ensure that everything is kept up-to-date

  • Software Center http://askubuntu.com/questions/4983/what-are-ppas-and-how-do-i-use-them/40351#40351
    • https://sites.Google.com/site/easylinuxtipsproject/first-Xubuntu#TOC-apply-all-available-updates
  • Https://help.ubuntu.com/community/SynapticHowto Synaptic Package Manager

  I know that some earlier versions of Ubuntu to (less LTS versions) the canonical versions of Firefox did not update, but I expect the center of software or package manager to be able to keep Firefox reasonably aware and do not drop by more than one version.

• BB messenger now removed from blackBerry Smartphones, emails do not work.

  These two are connected?  I didn't think they were.  I have just the additional chat feature, so I deleted messenger, but now I'm not receiveing emails (and I don't think that sending works either) my phone.

  It was a delayed reaction, however.  I deleted the Messenger last night, my phone off and turn it back on, Messenger was still there.  I received emails during the night and this morning. Some time later in the day, not emails and I checked and the messaging application is no longer on my phone.

  Is the question, do you think?  Do I need to reinstall?  Emails will not work without the Messenger?

  I have a Pearl 8120 T-mobile as my provider.  I know this isn't the e-mail servers or anything, because I have to separate accounts coming to my phone, and neither work.

  Thanks for any help.

  ETA: Sending emails out DOES not work.  I'll receive, check on a computer.  But I'm not going to receive email on my phone.

  Hi Karebee and welcome to the forums!

  I'm sure that it is a coincidence. BB Messenger is totally independent of your email.
  Go to options advanced options, host Routing Tables, click to enter. DO NOT CLICK on any list.
  Press the menu key and select sign up now.
  You will receive a verification email. Then, go to the website of Tmobile BIS and send service directories.
  You will receive an account activation email.

  Let us know how it goes.

  Thank you

  Bifocals

• Working with the results of the Action generated Poweshell

  Hello

  I have an action from orchestrator of a powershell script/function that I use regularly. The function is supposed to return a System.Object with email content (n, fromAdd, body, etc) that I would use in a script task.

  The problem I'm having is that I can't access these results in my work of scriptable. I know that the performance of the action a PowerShellRemotePSObject (and I have reviewed the literature on 'Working with PowerShell results'), but none of my attempts to explore the values give the results, I'm looking for. I'd appreciate any help to know what I'm missing.

  Thank you

  Thank you once again Ivo. Sorry for the delayed reactions. I took a peek at the solution you provided but had a few mistakes - there was no GetFilter() function defined for the call to psObject.getRootObject () .getProperty ('from'). After fiddling around with the results, I found my solution.

  I basically closed the rootobject of the return value of invocation of script that turns out to be a collection data structure (last result in the enumeration in italics/bold).

  .....

  rootObject var = psObject.getRootObject

  (rootObject element)

  {

  System.log (rootObject [index])

  }

  [10:43:33.159 2013-12-10] [I] DynamicWrapper (Instance): [PowerShellPSObject]-[class com.vmware.o11n.plugin.powershell.model.result.PSObject] - VALUE: com.vmware.o11n.plugin.powershell.model.result.PSObject@e9e592

  ....

  It turns out that the value of back in my Powershell script is the last element in the collection. from there, I could get my values:

  System.log (rootObj [rootObj.length - 1] .getProperty ("to"));

  System.log (rootObj [rootObj.length - 1] .getProperty ("from"));

  System.log (rootObj [rootObj.length - 1] .getProperty ("Subject"));

  System.log (rootObj [rootObj.length - 1] .getProperty ("body"));

  System.log (rootObj [rootObj.length - 1] .getProperty ("logFile"));

  I don't know if this will always be the case with psObject return values of Powershell called scripts, but several tests will help.

  Thanks for your time.

• The slowness of the bridge of scrolling

  Of the high torments of Brige is the horrible situation of scrolling.

  I have a fodler of only 29 GB of raw, 1000, yet top scrolling down is just torture. He jumps around and move.

  Someone on this forum said ram, ram, ram. I put the max of ram in the computer, and he did hot help at all.

  Technicians Apple says it's the limitation of the slow hardrive accessing data.

  But on another thread again, on another forum, someone has just said this:

  "I use Aperture, no bridge, and with the referenced images several tablespoons of images on external hard drives are essentially instant access;"

  Any comment on that. Thank you!

  BTW, why is adobe the only forum where you type your question and you will need to retype in a new window, am I missing something? Thank you.

  On my system (Windows 7, Intel Core 2 Duo 4GB w processor), I can smooth scroll thumbnails up to 146 x 97 pixels. But when I choose the size of things (171 x 114) starts to slow down and get very jerky. I see the same symptoms as you, with scrolling of start-stop and delayed reaction. Assuming that the screenshot you provided is at the 100% level, your thumbnails are set at 217 x 163 pixels, which is even more important.

  Try to click the small rectangle to the left of the slider to the size of the thumbnails at the bottom of the window, a simple click, to reduce thumbnails enough to fit one more in the content panel. Then see if that helps. If not, try another click and so on, until you notice an improvement.

  It will not solve the problem, but I hope that it will identify a bug in the bridge.

  While I was trying this on my computer, I was faced with another bug of bridge, where he insists on the generation of thumbnails/previews of the images already seen (and cached). I took a Collection with more than 700 images, and whenever I changed the size of the thumbnail, it decided to generate stamps of 30 or more, even if they had already been previously produced. This puts a drain on my CPU without valid reason and as a bridge slow to use until it has finished. I was hoping this would be fixed to the CS6, but no luck.

• Stylus: Gone wrong, or just simply not set correctly?

  I have recently developed a problem with my Tablet Wacom Saphire and pen (bought in 2005).  I don't think it's limited to Photoshop, but of course it shows up there.

  In PSCS5 (Mac OS 10.6.8 Core 3.4 GHz i7 iMac), I recently tried to use the Brush tool and it seems to behave strangely (and unusable from).  There is a delayed reaction in the two applications of pressure of the pen on the Tablet, but also release.  In other words, if I tap on an order, for example, it takes about 5 seconds to react.  If I try to draw, it takes about as long to Scripture begin.  If I stop writing, he continues to write for 5 seconds after the tip of the stylus leaves the surface of the tablet.

  The problem is fairly new.  I don't remember installing new software since the last time that I used it.  I'm a computer user pretty bone bare and have not much if any software succeed - all pretty mainstream.

  I installed the latest version of the software by Wacom 5.2.5 - 3.  I zapped the PRAM.  The Tablet has the same way on a different computer

  Is he likely to pen or Tablet comes from South?  Or y at - it a setting I don't know which causes this behavior?

  If there is a new tablet in my future and recommendations out there?

  Only, I solved the problem.

  After speaking with a representative of Wacom, I learned that the pen can get pie or just stuck in position 'walk' over time.  Just remove the pen with a pair of pliers tweezers or pliers.  Mine was undesirable at the junction of the pen and the pen.  I cleaned it, put the pen back to and - presto - it works again.

  I also learned that, in older tablets, it is extremely important to remove all prior software before upgrading to a new version.  Wacom offers a removal utility in an applications folder called "Bamboo" or "tablet".  This removal utility allows you to delete two preferences (do this first) then the application itself (including the utility).  Many programs remove the old version on their own, but not the former Wadom pilots.

• Serious delays and lack of reaction when Adobe Creative Cloud is running

  Hi community, sorry that my first entry here will be not very cheerful. In any case, I've been struggling with Adobe CC for awhile now, running processes, make my PC unresponsive for a period often. Description:

  System: Wind 7 64-bit, updated, 4 GB of ram

  Symptoms: When Adobe CC works (CC, not real programs app started as Illustrator, Photoshop, etc.) my computer slows down a lot from time to time, most of the time becomes totally unresponsive for some time. This can last from a few seconds to minutes and can occur at a frequency that the system becomes unusable. Nevertheless, the Task Manager shows no exceptional CPU load when blockages, or high memory usage.

  How I solved this day: the only solution I found is to stop CC app and kill remaining processes from the Task Manager. I did put the finger on the exact process of the cause, but I have a suspect: coresync.exe. However, it is completely non-confirmed.

  This problem led me to almost not to use my Adobe CC programs at all. Currently, it is not possible for me to do something with my Windows system process Adobe CC are running in the background. I thought initially that the system has contracted some kind of malware, but to my surprise, killing Adobe all processes as a cure. The last time I killed all but two of them, another who was coresync.exe, and the machine was still on his knees. I had to kill this one until the other has agreed to restart don't not after a command to die. After those, the system was back to business as usual.

  What I want to know is, you have others had such erratic behavior? I have just re-installed my Windows after it was ruined by malicious software. But now I'm starting to suspect that Adobe CC was the head one last time as well. I'm a bit thanks to pay for the service that makes me unable to make use of my windows and forces to do me periodic reinstall whole system in order to get the time of good months of use until it twists the bits again.

  I scanned the computer with most software tools malware available from Linux as well, so if there is some kind of worms dig through it, they are really sneaky. Whatever it is, infection seems fairly likely, given that the computer works normally as long as it is has that nothing related to the race of Adobe.

  Thank you, hope to hear your experiences, to see if it is worth the time and money.

  Hello! Late, but still there.

  This solves the problem partially, there was something else. As I suspected, the disk activity has been the main engine of the problem. But it is not related to Adobe products, which intensified the failure. After following the instructions, the problem got much less severe, but sure, has not solved the problem of failing to SSD.

  So, it was a problem of multi-leveled, where Adobe applications to malfunction amplified solid state drive malfunction symptoms. No wonder it's hard to spot.

  Anyway, we can now consider this case closed. Unfortunately I was not able to use my Adobe products for a while, and I don't know if I can for some time, due to the unavailability of computer maintenance. I'll get some help on it on another channel.

  Thanks and apologies.

• Reaction with delay on the evolution of the "visibility".

  The form has a "specify different" text field that should be visible in the 'other' is selected in the drop down list 'Role '. In practice, when you select 'Other', the field "Specify other" becomes visible, but when you do any other selection after 'Other', the field "Specify other" becomes visible. This means that you actually select "Other" twice to be able to fill in the field "specify other" (which becomes necessary when the 'other' is the 'role' selected, if the field "Specify other" is visible or not).

  https://Acrobat.com/#d=N6JAgPgsrSX1D03Nv09oCw

  Someone at - he seen this problem before and understood how to make it work properly?

  Drop-down list selections are not immediately available as a rawValue - does not save the value until you exit the field, so your code should work fine on the Exit event.

  You can use xfa.event.newText to get the selected value, then try this as your statement:

  If (this.boundItem (xfa.event.newText) is 6)

• Delay MBP to POWER IT and FREZZING

  Guys,

  After trying to update to OS X El Captain 10.11.4, my machine does not start correctly.

  First issue was a delay in market and show me the login window. This delay is about 30-40 minutes on the gray screen with the Apple Logo and a bar of full load with no reaction.

  After this time-out, I can connect, but every time I click or type, range of Mac balling and freezing of 10-20 seconds.

  THINGS, I TRIED TO SOLVE THIS PROBLEM:

  -Apple Hardware Test: Everything ok;

  -First aid and check the disk permissions: everything ok;

  -Tried to reinstall via MAS OS but with this gel, it was not possible. So, I pulled out my SSD to my machine, put it on the HD USB box, plugged into an another MacBook, download OS X El Captain, installed a clear BONE in my SSD via the USB port. About installed, I checked if it worked well. Started this machine of my SSD and all the good things. Recover from the SSD on my machine and the PROBLEMS CONTINUE to OCCUR.

  -LANDAU/SMC reset several times start normally (1 minute) my machine, but using these tools is not health and comfortable;

  -Anyway, with my camera of freezing, I installed Clean My Mac 3 and can't find any problems. Also use a tool called EtreCheck, which show me mac run slowly but say exactly what kind of problems I had.

  -Maybe I forgot one other things that I tried to solve this problem, but I need help.

  So, I have a MacBook Pro (13 ", beginning 2011, model A1278) with upgrade memory up to 8 GB and change the main drive to an SSD.

  I also put my original drive as a second drive in place of the CD player.

  Couple of tips

  Get rid of the CleanMyMac

  Re: Mac remove Cleaner - Apple Support communities

  Also - please post the full report Etrecheck so that we are able to guide you better

• How to remove the random delay to the extent

  Hi guys

  I had a little problem with a measure that I do in a subvi. Take a look at the picture (do not laugh please )

  

  Some first explanations:

  I put online a digital high in order to initialize a piece of hardware.

  Can I activate two relays. Time zero (T0).

  Then I have to activate the piece of hardware that I've initialized at startup.

  In the meantime enabled I do measure (here called Maling). The measure is 40 channels. I do measure on 10 circuits. Each of the 3 voltages and current measurement 1. Tensions are CSR and the current is differential. Sampling is 1000 samples at 1 kHz, which gives me a resolution of 1 sample every ms.

  After the measurement, I turn off the relay and the piece of hardware that I've initialized at startup.

  The collected data is transformed into an array of 40 lines and columns of 1000 with the data. In my loop for I extracted the data and make a comparison and put the data in a chart.

  Here's my problem:

  I get a random delay on each measure. I used to get the tickcount OpenG (could use framing). In the x - y indicator, I get 1060-1072 - ish milliseconds. I tried to subtract the 1000 ms of measure and delay of 60-72-ish "millisecond" added to my chart and dataindicators, but it does not work. When I use oscilloscope on 10 channels, I get the same measurement each time. When I do in Labview, it becomes worng because of the delay. I get exactly the same extent as the oscilloscope.

  In my own defense:

  I used the DAQ Assistant, because it gives me the wiring diagram of the material on my series M of NI USB-6225. Also I am not yet familiar with the implementation of the data acquisition without help. Yes, I looked at the forum and the examplefinder, but I spend too much time on this compared to help data acquisition.

  My measure should start just after the relay was activated. I think maybe using trigger on a clock internal, but not quite sure if it will help on the delay. My thoughts of setting this up would not use the DAQ help. Set up channels by using a loop For and do the measurement.

  You can maybe share some thoughts around the problem of delay and perhaps give me a clue on where to begin to remove this time limit. My DAQ should be ok because he has a limit of 250 k samples/s and I use it only 40 k samples. Do you think that the delay that I measure either before or after the measurement of 1000 ms?

  Kind regards

  Even

  My first reaction is that you are activating the fuses in parallel with your time of measurement and measurement on both. Move your clock of departure according to plunger PA and only to measure the time of Maling for beginners.

  (RelePWR-> Fuze Center-> time-> Maling-> time)

  /Y

  (next to welcome)

• How can I delay send SMS in IOS10.0.2?

  How can I delay the sending of SMS in IOS 10.0.2?

  Don't hit the Send button until you are ready to send it...

• Why safari's constantly crash/no reaction

  Why safari's constantly crash/no reaction

  Delete

  com.apple.Safari.plist

  and then restart your computer.

• Possible to delay the login items?

  Implementation of Adobe to open the connection software has created more problems than it is worth. I use Photoshop, Bridge, first and every day hearing as part of the same project, all related. I thought I would put them in place to open the connection, to save time.

  However, the location of the Cache for all download and also the folder for my Google Backup Drive, on an external drive, and if it is not present when the software tries to open, things go haywire.

  Is it possible to delay the opening of the connection points, by, say, 10 seconds?

  No, it's on or off only, there may be a 3rd party app that can do it, but you will need to check the app store.