Dell Precision 5510 - M2 SATA SSD

Similar Questions

• Is it easy to install a 2.5 SSD "in a desktop Dell Precision T5610?

  I intend to see a desktop computer Dell Precision T5610 with a standard 1 TB HARD drive turns. I would like to add an SSD inside and install Fedora on it.

  Is how easy it to install this SSD drive in the desktop T5610? Is there a space provided for this device?

  Kind regards
  Mount Fuji

  Hi Mount Fuji,

  It's like any other hard drive. Since you put it in a desktop computer, you will need an adapter for its fit in the spare drive Bay 3.5 ".

• x 8 connection distance MXI causes conflicts with my on my Dell Precision T3600 PCI slot

  Hi all

  The easiest to say is that I am migrating from a x 4 MXI explicit connection to an x 8 MXI express connection and when I do I get an error on the motherboard which is unable to load the single PCI slot.

  Error in WIn7 64 bit Device Manager reports a yellow exclamation point

  Device "Intel (r) 82801 PCI Bridge - 244 properties"

  The error listed in the device status box: "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Unfortunately, I need this slot machine to run a card calendar to conjucton with PXI hardware. There is no anomaly when I used the x 4 connections with virtually the same loadout except for one Exchange a PXI-5122 (x 4 config) to SMU 5122 (x 8 config).

  If I leave the MXI PCIe card in but do not connect to chassis PCI slot SMU (and the fine card appear.)

  If I remove the PCI card into the slot, the error still occurs.

  I swapped the x 8 card and NVidia graphics card without success (the 16 x only two slots).

  I photographed the reader and removed the H310 Dell PERC RAID card and charged the RAID array RAID integrated Intel C600 and still no change.

  I have updated BIOS to A07 to latest A08.

  I updated the Intel Chipset at the latest on the Dell Web site.

  I guess that I just wonder at this point if someone is able to run a x 8 MXI express at SMU with a Dell Precision T3600, T5600 or a T7600 chassis.

  PC - Dell Precision T3600

  Windows 7 Enterprise 64-bit SP1

  3.2 GHz Xeon 6 core (E5-1650) w 16 GB of DDR3 memory

  Reference Dell PERC Raid (x 8 PCIe) H310 / C600 onboard Intel RAID

  Nidia Quadro 600

  2 x 1 TB SATA drive (mirrored)

  SMU Rack - OR 1082

  Slot 1 - SMU - 8381

  Slot 2 - OR SMU 5122

  Slot 3 - NOR SMU 5442

  Housing 4 - OR 4 to 6 TB RAID NI 8262 x MXIe

  Housing 5 - PXI 6733

  Housing 6 - PXI 6733

  NI MAX report is attached as a text file.

  After much work by NI Applications Engineer Kyle K, this problem has been resolved.

  I'll post the solution to this PC dependent problem here, just in case it will help others in a similar situation.

  It seems that Dell sometimes uses one default BIOS quite restrictive on the number of PCI bus in these (and other). By allowing several PCI bus, you will be able to list all the devices in the sacrifice of some memory available for OS 32 bit running on 4 GB of RAM. No problem for me because I'm under 64 bit OS.

  Congratulations to Kyle even if he has not posted here yet for him give real congratulations.

  Greg

• Hard drive not recognized by BIOS in Dell Precision T7910 workstation

  Greetings,

  I recently acquired a Dell Precision T7910 workstation without all the hard drives installed, so I went to the store and buy a 240 GB Sandisk SSD put in the hard drive and then installed caddy caddy in port 0 (I also tried port 1 with the same results), and then I turned on the computer and it says "no drives found" press f2 to enter setup or press f5 for the diagnostics. I think there is probably a setting in the BIOS to configure the hard drive that I'm ignorant, so any help would be appreciated.

  Is there a CTRL-R (or another command CTRL during POST) to enter a for the LSI controller configuration utility? Possible that if installed/enabled, ports are managed by the controller LSI instead of the BIOS. However, I have not a 7910 to watch... just go out how it worked normally.

• 4 TB drive added for dell precision t7400 but does detect that 2 TB

  Hello everyone,

  We had a Dell Precision T7400 running windows 7 Professional SP1 and we have added a new hard drive (4to), but it does detect that 2 TB of disk (already placed the GPT disk).

  I read in another post that I started to update the SATA drivers?

  Is this correct?

  Where are the SATA drivers?

  Thank you.

  Best regards.

  The drive is connected to the motherboard or are they connected to a controller card? The T7400 controllers (SAS 6/iR, PERC 6 / i) do not support disks larger than 2 TB. If it is connected to the motherboard, you must update the Intel RST drivers:

  https://Downloadcenter.Intel.com/download/25165/Intel-rapid-storage-technology-Intel-RST-RAID-driver

• Dell Precision M6400 Win7 64 bit Dell Webcam Central software missing

  Dell Precision M6400 Win7 64 bit Dell Webcam Central Software.

  Long story short, just bought a M6400, updated after purchase with SSD, clean install. Can't find Win7 64 bit Dell Webcam Central Software.

  Please help, no I can't go to my account and download due to the transfer of my laptop has not yet closed.

  Webcam is recognized in the windows configuration, but not at dell. Already deleted the software of the victory, but I have no way or nothing to replace it with.

  Help, please

  Hi hdpartman,

  If the webcam does not work, I recommend you to uninstall and reinstall the webcam drivers.

  To uninstall the Dell webcam central software, perform the following steps:

  1. Click Start.
  2. Click on Control Panel.
  3. Using the drop down next to the view by: in the upper right, select large icons.
  4. Click programs and features.
  5. Click Dell Webcam Central.
  6. Click on uninstall.
  7. Confirm the uninstallation by clicking OK.
  8. Once uninstalled, restart the computer.

  I have provided a link below to reinstall the webcam drivers.

  http://Dell.to/YZkDs3

  Waiting for your answer!

• Precision T5600 SAS/SATA Controller Driver

  I recently received the workstation Precision T5600. The original configuration was the installation in RAID 1 with 2 SATA drives. I killed the RAID and loaded a single drive SAS instead of RAIDs. When I loaded a Windows 7 installation disc, windows could not see all of the hard drives. So my question is there a place where I can download the driver for the SATA/SAS controller and throw on a USB to load during the installation process of Windows 7?

  Thank you.

  Dell Dear user community.

  I having the same problem as jHartweck,

  I recently bought the Dell Precision T5600, but I'm not able to install Windows 7, because the SATA/SAS controller driver is not available.

  Someone of you managed to solve this problem?

  I'm looking forward to your reply.

  Sincerely,

  Micha Joosten

  Administrator COMPUTER

  Logistics engineering INTHER

• I want to update my HDD sata SSD? XPS 15 (L502X, early 2011)

  Hi people

  I want to update my HDD sata SSD in Dell XPS 15 (L502X, Early 2011, computer laptop). Please suggest which SSD support my laptop.

  Please check attached picture of the HARD drive.

  

  Thank you

  Hi Rajdel,

  New SSD should work fine.

• Dell Precision M90 Windows 7 upgratde & 2nd HD questions

  Hi all

  I have dell precision M90 for over a year now, I bought it with the following configuration:

  2.33 GHz processor

  4 GB OF RAM

  NVIDIA Quardor 2500

  150 GB HD

  the machine is a mazing, but lately, I decided to upgrade to windows 7 and I have two main issues between them.

  has made a success improve two windows 7 with M90 cause I checked on the Internet and I see a lot of contradicting the opinions about it!

  The second question concerns the storage, 150 GB is already not much with windows XP and all my installed software, so I am really worried about space during the installation of windows 7. I thought to add a second drive, but looks like a long process, the removal of pay media and obtaining a cradle for the new drive. that is not sold where I am currently. Is there is another way to install a second drive, if this is not the case, would you advice guys of the evolution of the lintierly in a car with the largest one, keeping in mind that the only ones I can find on the market is at 5400 RPM and 7200 rpm the the one I currently have is?

  If you suggestions on the correct action would be really appreciated...

  Hi all

  Update our Crucial M90 with FX 2500 M with a hard drive CT250BX100SSD1 250 GB solid state and hospitality Windows 10 x 64.  Challenge was to find video drivers.  After several attempts and a lot of research, I found this info.  Extract the CAB file, went to Device Manager and update driver underlined in the extracted folder of CAB and video driver was updated and works!  All FX 1500 M, FX 2500 M and FX 3500 M are supported for 32-bit and 64-bit and earlier versions of Windows.

  Impressive update Windows 10 and SSD brings the M90 about 10-15 sec.

  forums.Guru3D.com/showthread.php; highlight = quadro + 2500 m

  New graphics drivers NVIDIA from Microsoft Update have been posted! These packages include the file NV_WHQL.inf, which includes the native support for all computers desktop and mobile GeForce 6, 7, 8, 9, 100, 200, 300 and 400 series GPU (and Quadro equivalents).

  * Note: These packages of drivers do not include an HDMI audio driver, or contain PhysX System Software. Use WHQL v258.96 drivers for the last certified HDMI audio driver and visit www.nvidia.com/.../physx_system_software.html for the latest version of the PhysX System your

  259.47 version is the first version observed to add support for the mainstream GeForce 400 series!

  Reference Dell M90 Quadro FX 2500M

  Windows Vista / Windows 7 x 86 (32 bit): download.windowsupdate.com/ms...c43d908c63.cab
  Windows Vista / Windows 7 x 64 (64-bit): download.windowsupdate.com/ms...acec9c13b7.cab

• Dell Precision 690 workstation several hard drives

  I have a Dell Precision 690 and I am trying to connect the hard drives in the right order. The documentation says they must go into the HARD drive marked locations on the motherboard, but they do not work. The only slots that work are the SATA slots. I tested five SATA drives but I can only get three to work on three SATA slots instead of four locations of HARD drive and slot extra SATA as the book said to do.

  I tried which helps the controller under the BIOS: has no significance if it is enabled or disabled. I determined that AHCI is unable to be activated, it must be ATA.

  In the end, I need to have five total drives. Four in the slots in the HARD drive and the other in the SATA slot. (Which will be for operating system 1 SATA and SAS RAID 4). I realize that the HDD_0, 1, 2, 3 locations are to use SAS/SATA but I can't take too much work.

  In addition, I don't ' know if this is important or not, but he has Windows XP Professional x 64. BIOS A05 and I know an update is A08, I did do that yet though.

  Anywhere I can find that material assistance would be much appreciated.

  -E.Avalon (help).

  Yes, there are three ports labeled SATA (0,1,2) and four ports labeled as HARD drive (0,1,2,3). The manual says to connect hard drives in HARD drive ports, then in the SATA ports. The first two SATA ports are for additional optical drives and the last port is used for a fifth hard drive.

  I got in touch with several people in technical assistance from Dell and eventually find the right driver to install.

  Because I don't have the OEM disc that came with the computer, I was doing a new installation of a Windows disc. I needed F6 (third party drivers) to activate the HARD disk ports until the installation has taken place. (And honestly I don't remember what the file was immediately.)

  The AHCI could not be activated because the discs I have are Serial ATA disks and in the BIOS, there is a choice between ATA and AHCI.

  The problem is solved and I feel like I could do a test on this computer and become a technician for her.

  -E.Avalon

• XPS8700 32Gb SATA SSD

  I have an error with the SATA SSD of 32 GB and the Intel Rapid Storage Technology technology. The player status "SATA SSD on controller 0, 5 Port: Incompatible. In 'Manage' in the software of the TSRI: port locations: internal status: Type Incompatible: SSD use drive: size unknown: 30 534 Mo Firmware: LWDA. I have the latest firmware and the FIRST software of the Dell site I removed the drive, started without it and then reinstall the drive. I tried to find how to remove the metadata from the supposed (if present), but have not been able to do. The computer is only a couple of months. The SSD has not been used in any other PC or device. I can't access the device anywhere to erase or format the SSD drive. I am at a loss how to get this working and Dell support has been less useful considering the price I paid for this machine. Material supports a few point to software support - who want me to pay £119 for the fault. He never worked again. She always had a bubble without appear. Anyone got any ideas, please?

  Excellent. Glad to hear that you guessed it work.

• Dell Precision T7500 hangs at BIOS on reboot

  Hello

  My Dell Precision T7500 hangs after that screen "search for devices to HBA 0..." tells me that ROM is installed successfully. Thank for nothing. It just hangs.

  I tried to restart, open the SAS configuration - there only one option, tried the F1 setup - this does allow me to enter any choice (so no diagnosis, etc.).

  It started when I rebooted my system Ubuntu 13.04 after the installation of updates.

  Any ideas?

  Thank you

  Ant

  Hi chubbant,

  Try resetting the CMOS battery.

  Now try to boot in the BIOS. Restart the computer and press F2 on Dell logo. Under the heading "Disks" disable the SAS controller. Now click on 'Apply' and get out.

  If the steps above does not work, move the hard drive to a SATA optical and 1 to SATA2.

  http://Dell.to/11myUzX

  The link above, click on manual and the Documentation Service Manual.

  Before opening the chassis, I recommend you to unplug the power cable, press and hold the power button for a few seconds and release evacuate residual electricity.

  Note: Open the chasy, if you are uncomfortable doing.

  * NOTE: Please ensure that the power cable from the computer is disconnected before opening the chassis. Refer to the service manual for assistance to remove or replace the internal components of the computer.

  Waiting for your answer!

• A power of 1000w Dell Precision 690 United States will work in the British system

  I want to order a replacement power and found a Dell Precision 690 1000W ND285 power in the United States, I know that this system works this power but wanted to know if I ordered it from the United States to be shipped to the United Kingdom (England) it will work here or is there a voltage difference that will blow/effect it?

  The reason why I ask this is that I repair my friends Precision 690 power because it starts not as it should be because it has the dreaded 1-3 and power button flashing continuously orange. I usually get it going again for him leaving on the supply cable of the day after / for a few hours, but the problem comes back finally after some closures, so not a solution.

  His system has 32 GB of RAM, a processor my171 mother board 2 Xeon QuadCore 5355, a Nvidia Quadro 4800 graphics card and 4 SATA drives and 2 DVD r/w drives all sitting in the appropriate ports.  I tested it on and all the way to no disk no ram, but even in this case the problem may occur intermittently.  I don't know that his power relatively maybe even a little somewhere? but I've looked and looked and left with the feeling that his power.

  but the only one I can find that is affordable is to the United States, the price they want to pay in Germany, I could buy a car for.

  American food will work in my UK machine?

  Thank you.

  Hugh

  (Just note that happened in (general Hardware, Audio, video) I hope this is the right category, if not my apologies.)

  hughhill

  Yes, it should

  Input 100-120 v or 200-240 v, output: 1000w Max, reference number: ND285

  Model number: N1000P-00, Ref number: NPS-1000AB a Rev: 06

  For Precision 690 microtower systems

  Connectors:

  1 x 24 - Pin ATX power connector Standard ATX Standard 1 x 20-pin power connector, power supply ATX Standard 1 x 12 pin connector, ATX Standard 1 x 8-pin power connector, 2 x PCI-Express, 4 x Mini 2 power connectors pin power connectors, adapter 1 x 6 - Pin power connector.

  Before using the power supply, check that the voltage is set at 240v. There should be a red toggle on the power switch, to set the voltage, if there is no switch, then the power supply is auto switching.

• How to open the Panel rear Dell Precision M4600

  I want to open the back of the Dell Precision M4600 Panel so that I can increase the RAM and also put in a secondary hard drive. There is no documentation or a tutorial for that. Anyone can provide and guide on how to do it? I can't remove the battery, but here I'm lost. I see 2 screws on the back rear panel, but I don't know if it's the right screw to remove.

  Any help is appreciated.

  EDIT: Found the manual!

  ADMIN NOTE: broken link has been removed from this post by Dell >

  To add to the post of urlnotfound:

  Remove the two screws under the battery holding the lid.

  Slide, sometimes with a bit of force, the cover backward toward the back of the laptop.  Only, he moves about 1/4 "and is free to raise at this time here.

  Note that there is only a single 2.5 "HDD place, and it's the hot-swapable one you see on the side (still to figure out how to remove it, level didn't seem to do anything - for the moment).  "2nd HARD drive" is actually a dedicated slot 'mSATA', which means minicards SATA.  It's a tiny, as the three PCI-express slot you see when you remove the cover.  They are very rare to buy the property.  I really wish that I bought a Dell offered, aftermarket cause they are next to the non-existent.  I found only 2 manufacturers, which are the same brands under the hood.  But they are only the size of 50mm.  I want a site of 70mm slit in the WWLAN PCI-Express slot, cause those are available up to 240 GB.

  And FYI, devices with SATA II interfaces mSATA can get up to 240 to 250 MB/s read/write!  No, there are no mSATA SATA III that I could find.  Wanted for a month for them...

  Note also that only two senior RAM sticks are available here.  I'm about to call Dell support for where are the othe two DIMM slots (very probably have to remove the background map).

• ESX5.5 on Dell Precision T7610

  I have installed ESX5.5 on Dell Precision T7610 with this hardware configuration:

  CPU cores: 16 GHz CPU 2.593

  the processor socket: 2

  Memory: 64 GB

  Disks:

  1-disk SSD 500 GB (installed on this drive ESX5.5)

  2 - no SSD drive scsi drive attached serial ATA (Seagate 1000 GB) of disk

  each thinks works well I was sent 3 VM on the first disc. I cam move the VM from disk 1 to Disk2.

  but when I am trying to deploy VM on the disk2 Storage Seagate (serial attached scsi ATA drive), the operation failed, the second disc is no longer recognized by the server (disappeared since the storage drives),

  I have to reboot the machine Dell to see the disc again, Please see the file log atthed vmkernel

  some time, I do not see the disk on bios

  Please your recommendation is very appreciated.

  I want to confirm that ESXi 5.5 is taken in charge & certified on DEL T7610 of precision

  
  

  Thank you very much for your support.

  Madjid

  Senior system engineer

  Hello

  The problem has been resolved by removing the SAS disk 1000Go, adding two SAS 500 GB raid0 configuration.

  in this configuration I deployed machine VM without error to write file at the end of the deployment of the virtual machine.

  Thank you for all your help.

  Kind regards

  Madjid