delegation of security of VLAN and LUN for the isolation of customer
Does anyone know if vSphere will provide the delegation based AD of LUN security and VLANS? I need prevent clients in pools of resources to access other customer networks and paid virtual disks. Lack of permissions on Mon and VLAN has forced me to build groups isolated in a data center in order to provide safe limits.
Any info is greatly appreciated as I'm about to buy new equipment for yet another cluster.
Thank you
-Chris
Hello
If you allow your customers to use vCenter, so you already have quite a few problems, but in general you can use roles and perms to deny access to certain things. Delegation is however NOT supported. You can also look into
So in general, delegation no. AD Network/LUN is NOT supported. You can configure a virtual network to a client cannot access any other virtual network. You can have a unit logic or LUN by customer number. But if you need to grant access vCenter (I would never do this) then you may wan to watch the HyTrust appliance.
For the moment, you have physical constraints with LUN and design of virtual networking that will protect your networks. Note You can include in this VMware vShield Zones design that helps protect one network from another. etc. That is, it's like a packet filtering firewall.
Best regards
Edward L. Haletky
VMware communities user moderator, VMware vExpert 2009, Analyst of DABCC
====
Author of the books ' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' available for pre-order now
"VMWare ESX in the Enterprise Server: planning and securing virtualization servers, Copyright 2008 Pearson Education."
SearchVMware Pro| Blue gears. Top virtualization security links| Security Round Table Podcast virtualization
Tags: VMware
Similar Questions
-
In the middle of my teens adding devices, and registration for the apple's music, security issues have been changed and now nobody seems to remember the answers. How can you bypass those to change your settings?
You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.
(140233) -
Where to put the report server ip and port for the Siebel server?
Hello
Where to put the report server ip and port for the Siebel server? I have checked the document "Reports Siebel Guide" but does not know where is the configuration section ' ip address of the server and port ' for 'Oracle BI Publisher.
Note: I have installed BI Publisher, now necessary to define the ip editor and siebel server port.
Please help, thanks.
Hello
Communication between Siebel and BEEP coming through webservices. You must set the Siebel Outboundwebservice 'PublicReportService' address to address BI Publisher.
Similarly, the address of the webservice Siebel Inbound 'BIPSiebelSecurityWS' will be used by BEEP setting under the security model of Siebel - Siebel end Webservice poin of connecting to Siebel EAI, data inorder of success authenticate the Siebel user to perform the tasks of report being initiate Siebel UI.
Please go through the integration document attached to the thread "Re: ADVISE WEBCAST: BI Publisher 11g Configuration with Siebel", it is any integration Siebel with BEEP 11g steps. " But if you go through each step, there are details about why we do it. Through this way you can better understand the integration.
I hope this helps.
Thank you
Maria -
Urgent - Custom authentication and authorization for the application of the ADF
Hi friends,
Custom implementation for authentication and authorization for the application of the ADF
My project to use the OID , authentication and authorization, we will need to support both OAM and DB tables ( according to the preferences of the client during the installation ).
I am new to this and do not have a clue about the same.
Please guide me how to set up both in JDeveloper 11 g + ADF
Thanks in advance.The answers you got up to present every point in the right direction. ADF security see the authentication of WLS, even for business authorization with respect to user roles defined on the WLS server. During the deployment, ADF security defined application roles are mapped to the user enterprise groups
Application developed using Jdeveloper ADF +.
This would use WLS for authentication
Users of authentication - LDAP (OID) - are stored in LDAP
Use the OID authentication provider in WLS
Authorization - OAM or database (authorization details are stored in the DB or OAM tables)
You can't allow users without authentication. If you need create authentication providers additional if they exist for OAM and RDBMS (there is a supplier of existing RDBMA, that you can use to identify users and to assign membership user groups). Then, you set the optional flag so that when authentication fails for additional providers you can always start the application.
When running Admin users - create users from roles to create and assign permission privileges to the role (for pages and workflows)
assign (or remove) the roles to/to leave users.ADF security uses JAAS to permissions that you can change using Enterprise Manager when running. Permissions are granted to the application roles and application roles are granted to business roles that which then has users become members of the. If you want to change the status of user account, then you don't do this the ADF or EM, but use a direct access to the provider of the user (for example, access OID, RDBMS access etc.) There is no unified administration API available that would allow you to do this via WLS (which uses OPSS).
If your question is in the context of the ADF, the documentation, with that you should follow is OPSS and WLS authentication providers.
Frank
-
How can I set the default font size and type for the outgoing Hotmail mail?
How can I set the default font size and type for the outgoing Hotmail mail?
Hi Dale,
What is the email client do you use?
Outlook can be configured per - start Outlook-> Tools-> Options-> mail-> fixed Format and fonts... Select the font and size you need... Click ok on all screens.
I hope this helps.
-
How can I correct random lines horizontal and glitter for the LCD screens for windows vista HP Pavilion dv5? Only, it happens randomly and can get all a few minutes at a time every few hours. The entire screen white and black and horizontal lines will appear during the flickering on the half top of the screen only. Nothing else changes. My sound is immutable, and none of my screens change the size or location. However, they may appear up and down during the flashing. Can someone give me an idea of what is wrong? I looked on Google for possible corrections, but most of them seem to be for refresh rate and I don't have a notch for this and can't change it according to the steps they offer.
Read my initial response on what it takes to please.
"See if this helps you:
These lines indicate corruption graphics driver or lack of graphic material.
Go to the HP Web site > Search a drivers and download article > search your laptop model number > your operating system > drivers for it: either video / graphic / Chipset (according to the wording it) > download and install the drivers.
http://WWW8.HP.com/us/en/support-drivers.html
If that fixed it, it seems to me be a problem of graphic material.
Because it's a laptop; If under warranty, contact HP.
If is not under warranty, contact a repair shop, local. »
See you soon.
-
Hello
According to http://support.hp.com/us-en/document/c01664444 it doesn't seem to be a software and drivers for the LaserJet Pro M1132 MFP.
When will they be available?
I read in http://support.hp.com/us-en/document/c03427752 that "today, a solution for your printer is not available for the Mountain Lion. However, an update of the driver will be available in fall 2012 . "Since it's already winter 2012, a solution will be available before January 2013?
Thank you.
Hi Chun Pong,
Seems to download the software I mentioned before has been deleted. This means that a new driver will be downloaded.
Please visit the site from time to time if a new software is available. I'll keep an eye as well and provide an update here, if the new software can be downloaded. It may take a few days.
-
I need to create combinations of text and images for the web. How to do this in elements or do I need Photoshop for this feature? Please advise!
slynn5236 wrote:
I need to create combinations of text and images for the web. How to do this in elements or do I need Photoshop for this feature? Please advise!
You can do in PSE.
- Do the math to see how much space you'll need on your canvas to the image and text.
- Navigate to the file queue > new.blank. Enter the width & height, background color, resolution 72 px / in. It is your canvas, and in the layers palette will be the background layer.
- Copy and paste the image. It turns on a separate layer
- Activate the tool move, position the image and resize if necessary
- Activate the text tool, and then type your text. It will be on a separate so layer
- Position the text.
- Flatten layers and go to file > save for web. I'm usually on the long side about 800 px. Don't forget to check "constrain proportions". Adjust the quality slider to suit. You will probably want the type of JPEG file for web work.
-
am I correct assuming that the copy I have Photoshop CS is usless and headed for the trash?
See here and follow the directions:
Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3
-
Just got registered and paid for the clouds, but it now says my ios 10.6.8 isn't it - how make it past this? Is there an older version that I use, and if yes, what should I do then? There is no weekend help...
Previous through Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous
- and if you have Cloud application manager 2015 https://forums.adobe.com/thread/1906752 of difference
Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday
Or, update your Mac to a new operating system
-
Unable to display the results of a detailed report or the results of a questionnaire in a bed within the project. I checked the preferences of quiz and enabled for the draft declaration. I use SCORM 1.2. My LMS is not listed (MCN) and so I chose 'other LMS standard. Any ideas on why I see the results?
Publish your SCORM SCORM Cloud and test if it will show you the results you want. If so, then your problem is with your LMS. If this is not your problem may be due to something in the settings of your current project. Eliminate one thing at a time.
-
I bought adobe illustrator and waiting for the e-mail so I can download it but it does not appear
I bought adobe illustrator and waiting for the e-mail so I can download it but it does not appear
Hello
I don't see no active membership/registration under the Adobe Id on the forums.
Please confirm if there is any other Adobe Id in which you may have subscribed.
Kind regards
Sheena
-
Hello, I had a problem with my band. It does not really suppose he numbered scenes everything in order and he has so far in until I missed an and changed for the good order. But now when I go back to where I left and I have create a new scene number come up as * it and I need to change personally. is their any way I can change it to order normally?
Hello
You can manage this through the "Manage scene numbers" option in the menu 'Production '.
There is a setting in this dialog box to assign scene numbers automatically to the new scenes.
-
I had a problem with my Mac, and I have to reinstall Adobe Photoshop CS4, I have on a CD. I put the serial number I have on the cover, it takes it. another window opens and ask for the serial number. again, I put the same number and it says: invalid.
where will be the second serial number?
Help me please.
Thanks, Abe
Hi,
Please see error "serial number is not valid for this product". Creative Suite and serial number incorrect error
Kind regards
Sheena
-
Anyone know if there is no CC or BC apps or other alternatives that allow a way to create an online survey consisting of 3 questions for the participants to a trade appear to fill out and submit for the purposes of data collection? Offline data collection is a must. Ability to export data to Excel would be an added bonus. Thanks for the tips.
Hi Nathan,
This link might help: Create PDF fillable, creative forms of PDF form. Adobe Acrobat DC
Kind regards
Sheena
Maybe you are looking for
-
Qosmio G25: Dust seems to accumulate behind my screen?
Hello I use my Qosmio G25 for half a year now and over time, it seems that dust has been implemented behind my screen. It's not pretty to look at because it weakens my screen contain the dark spots. In fact it is not behind my screen, but between the
-
Drivers HP Web site is declining U.S.
HI guys...! @# % ^ wrong with hp US site? today at 16:43 15/06/2014 West US. / / / I have tried several times to go to http://www8.hp.com/us/en/drivers.html but nothing happens... .... My first impression was that was maybe my internet connection...
-
Windows Server 2008 fax and scanning... .cannot connect fax modem
Hello I am running Windows Server 2008 R2. Recently, apparently after you install some automatic updates when the server unexpectedly shut down several weird errors are produced on the machine. First to be noticed was that faxes were more to be recei
-
Window Live Mail 2011 bounce an email msg
I got an email that I am trying to answer. Multiple recipients, but only 3 ppl. When I answer all the email, it gets bounced. I tried replying to the email with 1 single recipient (tried all the recipients 1 by 1), e-mail gets bounced. However, wh
-
How to install a network printer
Recently, I am not able to print. I have a Dell's Laser 3115cn printer and this is connected to the wireless network. When I select the printer, it does not appear in the list. It's the same when I select an IP address, it does not seem to be. The me