Qosmio G25: Dust seems to accumulate behind my screen?

Hello

I use my Qosmio G25 for half a year now and over time, it seems that dust has been implemented behind my screen. It's not pretty to look at because it weakens my screen contain the dark spots. In fact it is not behind my screen, but between the screen and the protective layer that covers.

I have beared to live with it, like two months now, but recently, to my surprise that I even found an eyelash taken down there.

Does anyone have the same problem as me? Is there a way to remove the protective layer and clean the strainer, cause that it becomes a problem.
Hope to hear from you guys...

see you soon
Dave

Hello

There is not really a way to do so without possibly damaging the LCD. If your computer is under warranty, I advise to take it to your authorized service provider and to replace the LCD screen. I remember the dark spots in LCDs are contained in security LCD which makes replaceable under warranty. Otherwise, you can try to clean behind the protective layer, but I don't think it will change anything.

Hope that fix you and have a nice day.

Tags: Toshiba

Similar Questions

  • FIXED dust behind the screen of x 220

    Hey guys I've had this laptop for about 2 months and today I noticed there is dust in the corners, behind the screen, im a little KNOCK and that kind of things make me crazy

    any advice is very apprecated, thanks guys


  • Qosmio G25: Restore UK disks can work on machine USA?

    Hello
    I attended college in the United Kingdom since last September. Has decided to make use of the Easter hols to start on my Qosmio G25 (G30 to the United Kingdom). Unfortunately restore 2nd disc (3rd if count you the disc from the Qosmio player) has a read error.

    I've been in contact with a very nice toshiba service representative, but he says that records UK will be dependent not on a machine of USA due to the identifier is different (CMOS/processor or m/Board).
    Another that ask my brother to ship the original for me disks (I travelled with the backups that I did), the only thing I can think is to try software retreival data on the failed drive and burn a new disc.
    I'm off to a friend to do once I have validated.

    If anyone can shed some light on how to use a disc of UK to recover my system, assuming that it is a question, it would be great.

    Hello

    I don't really know if it will work. I heard that the American units have support different recovery check and if the drive is not the right installation is not possible.

  • Activation microphone Qosmio G25

    Hello
    Unsuccessful so far tried to activate the built in mike as well as a plug-in of mike in spite of tweaking the settings of Soundmax.
    Any ideas?
    You want to use Skype on the mobile phone.
    See you soon,.
    Peter

    Hello

    I'm not very familiar with the Qosmio G25 because this device was designed for the American market.
    I'm not 100% sure if the internal MIC is available on this unit.
    But if the internal MIC is available so normally, it should be possible to enable this device in the Panel of control under "Sound and Audio device.

    The other side, you can use the external mic.

  • Qosmio G25: Vertical lines of pixels blocked

    I have a huge problem with my Toshiba Qosmio G25:

    My LCD has 2 lines of pixels blocked, one pixel wide, going from top to bottom. Before we continue, I want to point out that my computer has not had any physical trauma of any kind and is usually used as an office.

    Everyone knows about this problem? Is there any miracle solution that I can handle it on my own or the only solution sends on laptop computer for the service? How the problems like that managed, toshiba will replace the screen or that they will completely replace the computer? I'd much rather prefer rather to solve this on my own with your suggestions as opposed to a long wait on the service.

    All of my school work depends on my computer and I would be helpless without him for several weeks. Please if someone has experienced this problem and it is resolved, I'd appreciate that they could share their experience and knowledge.

    Thanks for your time.

    Hello Makaroni

    It is not easy to say if this happens due to a malfunction LCD or even faulty graphics card. You can check its operation with an external monitor to see if the problem persists.

    In any case I put t believe you can do anything on your own, especially if the graphics card or the LCD is faulty. The hardware must be replaced. I know it's very annoying, but I recommend you contact the service in your country. Save all your data on USB and try to finish your work on some PC friends.

  • Qosmio G25-AV513: Windows XP and SATA HD RAID?

    Hi, I own a Qosmio G25 - AV513 (and HD Serial - ATA), and I am trying to install windows XP Professional. When I start to install, she prays for the scsi driver. I provided a usb floppy driver, which is always pressing S as requested. After installing windows begins, just after formatting my HD, it asks that the TOSHIBA RAID driver again. The problem is that now, it does not recognize the USB (I think), and it does not read the driver.

    What should I do?

    Hello

    Well, it s a strange question.
    Try to disable RAID in BIOS. Then try to install Windows Xp.
    After this procedure, if the operating system is running, select the RAID and install the drivers for the operating system.
    I m not 100% sure it works because I use only the recovery CD to recover the device, but you can try it.

    Hope this will help you.

    PS: Please check out the other topic on this strange problem.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=7218&TSTART=15

    Good bye

  • Qosmio G25: Qosmioplayer TV button function change

    I have a Qosmio G25, but instead of switching to the analog tuner Qosmioplayer key I want to turn on my hdtv usb device. Is this possible?
    Any help is appreciated.
    Thank you

    Hello

    I agree with Quad. Just reply: not possible :(

  • Qosmio G25: blue screen of death in the course of watching TV

    I also get the blue screen of death (Qosmio G25) and without apparent reason. I just watch a HD channel for an hour and it just hangs at random while the TV was going on. His crashed a few times before that too. But the strange thing is that I never changed anything, I just watched TV and went to the blue screen with the code everywhere.

    Does anyone else have this problem?

    Kind regards
    Stephen

    Hello

    AFAIK the Qosmio G25 was designed for the American market.
    All laptops that end in 5 are for the U.S. market.
    However, it is not easy to say why it happens.
    I assume you are using the image of Toshiba's own operating system.
    I checked the driver Toshiba U.S. page and found a few drivers.
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp?

    You can check that you have installed driver TV tuner driver and BIOS versions.
    Maybe a BIOS update will help you.

    But the blue screen of death is usually due to the fault of hardware or software serious dysfunction.

  • Qosmio G25-AV513 CD/DVD does not work anymore

    Model: Qosmio G25-AV513

    CD/DVD drive will read/play all CDs and DVDs, but does not burn, Help!
    Ive Tried: uninstall, reinstall the Cd/Dvd driver, using the brand different cd burning programs, activating/deactivating the drive. Help! Please

    In my case the removal of the upper and lower registry filters helped get the CD/DVD is working again.
    You should try this:

    -go to the Device Manager and remove the drive from the list CD/DVD
    -Start the registry using the regedit command and delete the Upperfilters and Lowerfilters completely from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    -restart the laptop.

    Like I said it was very useful for me. Maybe it helps you too.

    Good bye

  • Need of replacement of CD/DVD for Qosmio G25

    Hello everyone

    I have a Qosmio G25-AV513. This is very similar to the G20. It is out of warranty. The Dvd/rw drive is a carpet * a 845 s. The trouble started just after a year of purchase. After a complete system restore and update the reader has a very unpredictable reliability with optical media. The brands it has previously burned without problems now are not recognized or fail with the error "power calibration".

    I went through the administrative service, various burning software settings, revising flash's 102D. Various resources on the net show that the other laptop brands that use this model reader also suffer these problems. I'm therefore looking to confirm a suitable replacement disk. I have taken note that the master/slave jumpers may be hard together.

    If you are looking for a replacement, that I fell on the Panasonic UJ - 85J. Can anyone confirm this or another drive as a replacement right? Although I would like to keep away from the mat * a readers.
    Pointers would be appreciated, it's not fun drag an external drive.

    Tony

    Hello

    > He previously serious with no problems are currently not recognized or fail with the error "power calibration".

    The power calibration error because the lens of the drive cannot calibrate in the correct position and that's why the drive can't handle the different CD or DVD.
    As you assume already that the drive needs to be replaced

    All compatible readers should be mentioned in the manual of the user who is always pre-installed on Toshiba laptops
    Take a look here.

    You can also try to contact the ASP in your country. You can order each taken part supported and compatible with the service partner
    In my opinion it of a safe way to buy a really compatible player

  • Satellite Pro 2100 two cables behind the screen

    Hi, first post so be gentle with me please.

    I have a Satellite Pro Satellite Pro 2100 and the hinges are shot, so I bought a 2100 piece to Exchange.
    Everything was ok except that I have two sons that I can't find a place to plug in. A black white and they are attached to the small square gold Ribbons that are glued to each top corner at the back of the screen. The other ends have little, but when I stripped the laptop they were in bulk and I do not see where they are going.

    However, the laptop works fine without them.
    Can anyone help please?

    All laptops with WLAN have this. WLAN antenna is placed behind the screen and these two wires must be connected to the WLAN antenna.

    If your laptop doesn't have WLAN card put just the cables aside and everything will be OK.

  • Satellite 1800-921: antenna integrated behind the screen?

    Can someone tell me if the Satellite 1800-921 has an antenna behind the screen?
    Thank you
    Peter

    I guess you mean a kind of antenna? As far as I know behind the screen is placed antenna WLAN for supported models with WLAN connectivity.

    I wasn't able to find info on Satellite 1800-921, but if the unit is supplied without WIFI I guess that there is no WLAN antenna behind the screen. By the way: I believe that the Satellite 1800 series is delivered without a WLAN option.

  • Equium A100 - 02K seems to work outside the screen

    Hello

    Laptop starts and seems to run off the screen. If the screen opens more than about 50 degrees, then there is no display. If the screen is open less than 50 degrees, it works fine.
    Any ideas?

    Thank you

    > If the screen is open less than 50 degrees, it works fine.

    Could be a connection problem. Maybe the cable or the FL inverter is loose.
    It of difficult to say and, therefore, the laptop must be verified by a Toshiba technician who is responsible for your country

  • Portege 4010 - brands behind the screen

    Hello
    I, ve just had two of them, and they all have two points behind the screen. Almost looks like mold or a spill inside the surface, they are not trademarks of electronic type (pixels dead etc.). Can I access the back of the surface before disassembling the lid or isolating this part of some kind of glazing.
    considers that Mick.

    Hello

    I can just imagine what it could be. I checked a few websites on this unit but I put t found no point. If you think that it s a hardware fault, so you should ask ASP for more information and help.
    But you shouldn't t open or remove covers on your device

  • When I click on the ' icon of Spider solitaire I hear the game however now it loads behind my screen, rather that it front of the loading screen? Might still have the CD rom provided with Windows

    I've been plahying lonely spider offline for many years on this computer.  All of a sudden when I click the icon of the spider I can hear it loading but it loads behind the screen.      I can go to start program... Hearts... in offline mode and it appears normal for me to play.    Spider Solitaire is not scores by going to the start.  programs etcc.   I don't know how it appeared originally.  I hope someone can help... I am addicted and need a fix... Grandma

    Hello

    -What operating system is installed on your computer?
    -Did you change on your computer before the show?

    Assuming you are using Windows 7, I suggest you to follow these steps and check if they help.

    Step 1:

    Make SFC scan and check if the problem persists.

    Step 2:

    Perform a System Restore to the point that it was working fine.

Maybe you are looking for

  • gs803uar #aba: I can't find recovery

    I can't find recovery for my laptop, my name is HP pavilion DV 6948se and when searching by my product number, which is gs803uar #aba, I received another product name HP pavilion DV 6648se. I can't do recovery or find drivers for 6948se and where to

  • Bootcamp is not install due to the mistake of the amount of available space

    I try to install windows on my mac with bootcamp 10. But somehow when I go in the part "" Select task"he keeps popping up that I have 50 GB of free space on my boot drive to install. But I checked my mac storage, I have 50 GB available, can you guys

  • Communication between PCI6251, Labview and Matlab

    Hello I work with a Council of PCI6251, driven by an executable labview. I get measurements from several sensors (pressure, temperature, etc.) which are read by the executable of labview. I would like to know if it is possible to send these Matlab me

  • My HP Pavilion Notebook of 15 will take more fast RAM?

    I recently bought a laptop HP Pavilion 15 - p199sa that has a single stick of RAM 8 GB which I want to change for 2x4gb or 2x8GB modules in order to use the dual channel operation. Installed the module is DDR3-1600 (PC3-12800). I ran the memory key a

  • Cutting tool lack of Win 7 Home Premium

    I have a Fujitsu Lifebook TH700 Tablet PC with Windows 7 Home Premium (64-bit processor i3) and it did not come with the Snipping Tool. I tried a search for her and she is not installed. Is there anyway that I can get this app?