Delete 1 3 members EqualLogic

We have 1 pool with 3 members
I want to delete 1 member of a group.
Is it wisely in production time? or wil this slows down the performance on my group?

Hello

It must first of all make sure you have enough free space to accommodate the Member that you remove.  Depending on the load on the group, he could be an impact on performance.  As more data is moved out of the deleted member load will have to be managed by the two remaining members.  If the group is very slightly, the impact will be minimal.   The process away from data is managed at a lower priority of i/o requests from servers.

I suggest that you start by creating a temporary pool and then move this member to the pool first.   Once it is completely moved more you can remove the group.   This makes it easier to cancel the process in case you find the impact is too much or you change your mind.  You can cancel the move, or when it ends if you find that you have need of that Member, you can very quickly reach it back with the option "merge pools".

Kind regards

Don

Tags: Dell Products

Similar Questions

  • Remove the Member from the pool shared with 3 members EqualLogic

    Hello

    I think that my last post was not able to download.

    How can I remove an EQL Member that went wrong in the shared pool?

    EQL all run raid6 and there is enough free storage to remove the bad device.

    (Bad) PS4000, PS4100 and PS6000

    Hello

    Is the table online or the poster in offline mode in the GUI?    If online, you can use the delete member option in the GUI.  This will move the data to the other members.

    What is the problem with the PS4000?

    Kind regards

    Don

  • ODI and delete share accounts members to the planning

    Hey there,

    We have 1 alternative account hierarchy, that remove us all level 0 marked as shared dimension member counts.
    The problem is to do takes Age, at the same time of rear loading done in minutes, these members removal takes an hour.

    Do you know if there is a problem when ODI remove members shared planning?
    Do you know what Oracle is doing in the background (we have Oracle as database)?

    Thank you

    You can test the removal even using the outlineload utility to compare the results, if there is a big difference in the time then he connect with Oracle.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Can I remove the storage (default) of a multi-member Equallogic array group Pool

    Current config:

    1 group, 3 members Equallogic arrays: Array01, Array02 and Array03.

    3 Array01 of Pools of storage (default), Array02, Array03

    I need to remove the Array01 member to remove the group. The default storage pool moves automatically to another Storage Pool? that is Array02?

    I've already migrated all volumes and snapshots off Array01.

    Config required

    1 group, 2 tables of Equallogic members: Array02 and Array03

    2 (default?) Storage Pools Array02, Array03

    Thanks in advance.

    The default storage pool cannot be deleted.  It will just sit there like a pool empty (without the members of the group are attributed to him) if it is not used.

    -joe

  • Y510P stolen serial number

    Hi all! Unfortunately, I recently had my laptop stolen. I contacted Newegg to ask what was the serial number and they gave me this: "1S59406636xxxxx." Of course, it's too long for just a serial number of the product. Can anyone knock me what all this means, and what part must be given to the police?

    Thank you!

    Comment to Moderator: Order number deleted to protect members of wrongdoing.

    Ferros wrote:

    Hi all! Unfortunately, I recently had my laptop stolen. I contacted Newegg to ask what was the serial number and they gave me this: "1S59406636xxxxx." Of course, it's too long for just a serial number of the product. Can anyone knock me what all this means, and what part must be given to the police?

    Thank you!

    Comment to Moderator: Order number deleted to protect members of wrongdoing.

    Good day and welcome to the community.

    Sorry, you have problems.

    Your model number is: 59406636
    As you can see, I've been expunged your S/N. try using the part of S/N in this form: http://support.lenovo.com/us/en/warrantylookup and you should see some additional info.

    I hope this helps a little.

    Kind regards.

    (edited for clarity)

  • Is the correct model U41-70 of Lenovo, how to find its drivers?

    Hello

    I just bougth a new computer laptop, his model is U41-70 and the serial number is xxxxx.

    But I couldn't find his driver on the Lenovo Web site so I wonder is this a fake?

    If this is not the case, where I can find its drivers.

    I have bougth at the supermarket

    Thank you

    Comment to Moderator: Order number deleted to protect members of wrongdoing.

    Good day and welcome to the community.

    Please take a look at: http://support.lenovo.com/us/en/products/laptops-and-netbooks/u-series/u41-70

    for drivers and other resources of support for your U41-70.

    Edit to add: using your S/N here: http://support.lenovo.com/us/en/warrantylookup I got:

    I hope this helps.

    Kind regards.

  • How to find a complete product specification of Lenovo serial number?

    I buy a lot of Lenovo used equipment.

    The selling company doesn't have a detailed specification of all.
    They gave me the serial number of equipment.
    How do I get the configuration complete a product and its internal components?
    Is it possible to Lenovo site?

    Here is a list of example of series below

    XXXXX

    Comment to Moderator: Order number deleted to protect members of wrongdoing.

    Ok! It works and it has me so much help. Thank you.

  • Cannot add my Lenovo T430s to my products - wrong type, even if it is correct

    Trying to add my Lenovo T430s to my products to get help, but system indicates that the TYPE is incorrect, even if it's just:

    Screenshot of system error:

    [Link to image display S/N deleted]

    Photo specification etiquette:

    [Link to image display S/N deleted]

    What should do?

    Comment to Moderator: Order number deleted to protect members of wrongdoing.

    Finally the added by removing the hyphen.

  • X 1 carbon 2014 Sim tray

    Hi my micro SIM can not enter with the tray inside the opening at the back of my thinkpad. Also, it is very difficult to maintain the microsim inside the status bar that is very small. I had X 300 before and no pb with my micro SIM.

    X 1 carbon 20 has 7 SN tc01 xxxxx

    Comment to Moderator: Order number deleted to protect members of wrongdoing.

    OK thanks I managed... I had to bend the metal inside which was in the bottom to insert opening the map work really patience... I think some people need to succeed! Thank you

  • BSOD W530 frequently

    W530

    Type - 2441-BQ2

    SN - xxxxx

    SSD - SSDSC2BF240A4L - Driver ver - 1.75.02

    Intel Core I7-3940XM

    16 GB memory

    WIndows 7 Enterprise SP1 64 bit - load Corporate gold

    WhoCrashed are:

    This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B80)
    Bugcheck code: 0x19 (0x3, 0xFFFFFA800CCB6340, 0xFFF1FA800CCB6340, 0xFFFFFA800CCB6340)
    Error: BAD_POOL_HEADER

    This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
    Bugcheck code: 0x19 (0x3, 0xFFFFFA800CCB6340, 0xFFF1FA800CCB6340, 0xFFFFFA800CCB6340)
    Error: BAD_POOL_HEADER

    This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B80)
    Bugcheck code: 0x1A (0xFFFFFA8003716490, 41790, 0 x 0 x 0, 0xFFFF)
    Error: MEMORY_MANAGEMENT

    This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B80)
    Bugcheck code: 0x1A (0xFFFFFA8003716430, 41790, 0 x 0 x 0, 0xFFFF)
    Error: MEMORY_MANAGEMENT

    This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B80)
    Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF80002CC4F5B, 0x0, 0xFFFFFFFFFFFFFFFF)
    Error: "KMODE_EXCEPTION_NOT_HANDLED"

    This was probably caused by the following module: tcpip.sys (tcpip + 0x5E532)
    Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF88001C5E532, 0x0, 0xFFFFFFFFFFFFFFFF)
    Error: "KMODE_EXCEPTION_NOT_HANDLED"

    This was probably caused by the following module: ntfs.sys (Ntfs + 0x1F15)
    Verification of error code: 0 x 24 (0xC08A5, 0 x 0 0 x 0 0 x 0)
    Error: NTFS_FILE_SYSTEM

    Comment to Moderator: Order number deleted to protect members of wrongdoing.

    A ran diags Lenovo memory and found one of the four modules is bad. It is fine if it's the only installed but will not play nice with others. Any place that I use, under the cover on the bottom or the keyboard. STIL under warranty then new module commissioned.

  • Help! Technician of inexperienced Lenovo?

    Hello

    I had artifacts displayed on my computer laptop B480 model 20140 when I tested Aliens vs Predator D3D11 Benchmark while the other laptop with the same model and type (or any other laptop with geforce 610 M) does not artifact using the same clock, while I need to downclock the clock of the video memory of its normal (900 mhz) clock to 800 mhz in order for the artficat to disappear. A new installation of windows/program/driver doesn't fix it, is clearly a material defect.

    It's been a week that my cell phone is held to the lenovo service center located at JL. Pluit Timur Blok L Barat No. 25, Jakarta

    But, when I called the technician, he said that the laptop have no problem * sigh * this technician seems to be the lack of experience to tell if a video card is faulty or not, even when he saw artifact during the AvP (Alien vs predator dx11) Benchmark test on my laptop.

    Yes, is there someone here who can help me to gets my laptop fixed so I don't gets artifact as any other portable B480 model 20140? (or at least helped me said the technician how to differentiate a defective video adapter and a normal) My serial number is WBxxxxx391

    Thanks in advance

    Best regards

    AdamN

    Comment to Moderator: Order number deleted to protect members of wrongdoing.

    Finally, I am able to recover my laptop!

    A few days ago, I asked the store where I bought the laptop to contact the Service Center because my phone calls never is picked up.

    And Friday the the person in the store was furius because his phone calls be taken up also, so he went to visit the SC and ask directly, it seems that my laptop (and a Lenovo desktop computer he put there too) already finished but that SC provide never any information on this subject, and their phone call is difficult to achieve It has become very annoying for clients because this SC never give an estimated time required to fix and only said "we will inform you when it's done" which apparently customers inquire as promised and customers able to contact by phone or by any other means is (other than to visit this SC)

    From this experience I surely don't want to go to a SC that offer this kind of service because it can be frustrating asked to wait "indefinitely" and does not notify when it's done and impossible to contact the SC also-_ -.

    In any case, create a topic here in this forum without doubt helped me not gets my laptop fast fixed since no Lenovo answered here in this topic, I just want to update to the latest state of my laptop.

  • Restoration of MS Office to Lenovo Ideapad 460p

    Hello

    I bought a Lenovo Ideapad 460p year 2010. A few days back, I did a OneKey Recovery. I lost my MS Office. I think that Office 2007 has been a licensed version in the present.

    S/N: xxxxx

    Kindly help me to recover it.

    Concerning

    Frédéric

    Comment to Moderator: Order number deleted to protect members of wrongdoing.

    Good day and welcome to the community.

    I think for your problem, you will need to contact the Service to discuss. I've included the contact information below.

  • x 41 laptop, TABLET NO. !!!

    Hello

    I have a x 41 laptop, but is not a Tablet, it's a laptop and I have not find the drivers on the database, I find only Tablet x 40 or 41 x, where is the x 41 laptop? , label on the bottom "" TYPE 2526-CT0 S / N xxxxx 06/09 ".
    and tag produt "2526V6F."

    Please help me find the drivers thanks

    I use windows xp professional.

    concerning

    Luis Carrilho

    Portugal

    Comment to Moderator: Order number deleted to protect members of wrongdoing.

    Good day and welcome to the community.

    The support site has been recently redesigned and rebuilt.

    For your X 41 computer laptop, please visit: http://download.lenovo.com/express/ (Please note that the warning) and then click on the matrix driver link (first point at the top left of the article). On the resulting page, make your choice of three menus and your driver matrix will appear.

    I hope this helps a little.

    Kind regards.

  • T61 will not accomplish w/new fan start

    Fan has been making noisy so I ordered a new and put in it, when I tried to boot it line ThinkPad screen w / vile blue button and I get two short beeps and one long beep and it stops equip old fan, it starts up fine OK, bad fan, ordered an another and same thing? I'm back w/ fan / noisy and keeping close tabs on cpu temp my T61 is 6465-cto, s/n xxxxx type 07/12 the original fan has only 7y12a for some, two fans who did not start are fru 42w2460 help!

    Comment to Moderator: Order number deleted to protect members of wrongdoing.

    You simply replace the fan or the fan/radiator?

    If you replaced 15.4 "heatsink with a widescreen 14.1" radiator you should have noted an obvious difference in the parties. I'm also curious to know if you have replaced the thermal paste on the CPU and the GPU chip?

  • who is wrong?

    I have a b 8004, 065, error code when you try to install Windows Live Family whats wrong?

    using windows xp service pack 3

    Hello

    It is a very rare problem in parental control. To remedy the problem, we recommend that you reinstall the client and delete all current members in your account. This will refresh the client of parental control configuration and members added to your account. To do this, please follow the steps below:

    1. How to remove parental control?

    2 remove all current members in your account:

    2.1 connect to http://fss.live.com using the parent account.

    2 2. Click on the option manage the list of the members of the family, it is located on the lower part of the page.

    2.3 select everyone, click on the Remove button and it will ask you to confirm the action.

    2.4 Remove button click again to update the changes and it will connect you automatically off Family Safety website.

    3 reinstall Family Safety. Here is the link where you can download the latest version of the parental control: http://windows.microsoft.com/en-US/windows-live/essentials-other-programs

    4. restore the child account by following the steps in the solution below article:

    http://Windows.Microsoft.com/en-us/Windows-Vista/protecting-your-kids-with-family-safety

    Let us know the result later.

    Thank you.

Maybe you are looking for