Delete the graphic signals - no historic property node

Similar Questions

• I accidentally delete the record microphone to sound property. sleekbook 14 tsb132tx

  help please, I accidentally delete the record microphone to sound property.

  where can I download the microphone for my sleekbook 14 B132tx TS.

  help please someone.

  Thanks in advance.

  Hello

  Do a right-click the speaker icon in the taskbar, then select recording devices.

  Right-click on an empty area of the next window and enter a tick against the "Show disabled devices" and "Show disconnected devices".

  If your microphone will now appear in the list of devices, right click, and then select activate.

  Kind regards

  DP - K

• The XY graph Plot.LineWidth Property node problem

  Hello!

  I have a loop, where I repeatedly putting curves in a XY Chart. In the first iteration of the loop, after the first corner appears on the graph (I send data from the graphical indicator), I use a Plot.LineWidth Property node to align the thicker. However, in the next iteration, when the second plotted curve appears on the graph, and the property node is pulled again, the second curve remains thin. I guess what I've done wrong, that this property node defines only the first curve? How can I set the width of the line of all the curves of the XY graph on the same value? When I directly on the properties of XY graph, I can set the width of the curve, but only one by one...

  Suggestions how set the widths of the ground on a specific chart XY?

  Thank you!

  If it is a multiplot XY, you must set each plots properties by using the property activeplot (index of the new lot), then by setting the thickness.

• distinguish between the indicator and controls using property nodes

  How can I distinguish between controls and indicators property nodes?

  I find that the controls and lights on the Panel before all come from the same class... a digital control and a digital indicator share the same properties... I am trying to find a way to distinguish between the two.  I would like to be able to analyse a reference VI pull only the references to the "controls" or "indicators" on the front panel... but when I try this, I shoot all...

  Although I found this case a knot of property ' control value: get all ' referral of VI, I can choose between only indicator or only the values of the controls... it's close to what I want, but instead, I like to shoot only the references to the Group of the "indicators" or only the references to the groups 'controls '.

  does anyone know if there is a simple way to do this?

  Thank you very much!

  

  Suprisigly to search for flags search controls

• can someone tell me why I don't get the graphic signals in seprate

  Hello

  I'm stuck with a fundamental problem, in fact I use NI USB DAQ 6212 with my labview8.6, what I do is to get two different analog signals to ai0 ai1 simultaneously and showing them on two distinct waveform graphs, I use the split signal table index and both to solve the problem, but it is always showing me what a signal on the two graphs instead of show me two different signals on the two graphs. can any body tell me what I'm going to do now, is there a problem with my DAQ hardware I brought just a few days ago, or should I include something in the software? criterion vi is attached.

  waiting for a good answer

  
  

• Find and delete the graphic lines of geometric limits

  Hello world

  I'm really desperate after days of web browsing and the forums that I still cannot understand this.

  I'm working on InDesign CS3 on a MacBook Pro with Snow Leopard.

  I have a catalog of 300 pages, set up thanks to a data merge. Unfortunately this way, I produce 2 graphic lines at the end of each page to which I would like rather to remove. Since I don't want to do it manually to each page and I'll have to set up this catalog quite frequently in the future I would like to remove these lines using Applescript.

  Since I have about 12 more of the same lines on each page (same style, color, stroke etc) I thought that the only way to tell which Applescript to remove is the geometrical limitations because these lines always run the same coordinates on each page.

  Unfortunately I can't understand it. I tried the following code:

  tell application "Adobe InDesign CS3"
       tell document 1
            repeat with oneFrame in (get graphic lines whose stroke weight = 1)
                 if geometric bounds of oneFrame is {0, 0, 0, 210} then
                      delete oneFrame
                 end if
            end repeat
       end tell
  end tell
  
  
  

  RESPONSE

  tell application "Adobe InDesign CS3"
       get every graphic line of document 1 whose stroke weight = 1
            --> {graphic line id 187 of page id 177 of spread id 172 of document "Untitled-16"}
       get geometric bounds of graphic line id 187 of page id 177 of spread id 172 of document "Untitled-16"
            --> {0.0, 0.0, 0.0, 210.0}
       delete graphic line id 187 of page id 177 of spread id 172 of document "Untitled-16"
  end tell
  
  
  

  It worked well for the line to x y 0mm 0mm with a length of 210mm.

  I tried the same thing with a line x 3mm y 134mm length of 210mm with the following code

  tell application "Adobe InDesign CS3"
       tell document 1
            repeat with oneFrame in (get graphic lines whose stroke weight = 1)
                 if geometric bounds of oneFrame is {134, 3, 134, 213} then
                      delete oneFrame
                 end if
            end repeat
       end tell
  end tell
  
  
  
  

  ANSWER:

  tell application "Adobe InDesign CS3"
       get every graphic line of document 1 whose stroke weight = 1
            --> {graphic line id 213 of page id 177 of spread id 172 of document "Untitled-16"}
       get geometric bounds of graphic line id 213 of page id 177 of spread id 172 of document "Untitled-16"
            --> {134.0, 3.0, 134.0, 213.0}
  end tell
  
  

  It was my best shot. No idea if I'm on the right track or totally out of bounds.

  Any help would be much appreciated!

  Thanks in advance...

  Osinho

  Take a look at that show the values for the geometric limits. These figures related to your x and is coordinated and you refer to them by their article in the list, for example, item 1 is the first "134,0" in your list, point 2 is called the "3.0", etc. So you need to refer to "that item 2 of geometric limits = [regardless of the value you're trying to match].

  If your document is very complicated, I think I would add another modifier to ensure that you get the right things, to say if these lines have a color that is not used on other graphic in the document lines, or if their weight of race is different, or even tests two items in the list of geometric limits if there is two that appear systematically in all the elements you want to delete - something for you make sure that you ONLY get references to the items that you want and are not likely to delete something, you need to keep.

  Good luck and welcome to AppleScript!

• Graph plot legend colors Signal not updated when mixed with the property node

  Hello

  We try to put the colors of the trace of a graph of Mixed Signal using a property node. Although we can change the color of the data in the field correctly, the colours of the plot in the legend do not change until some apparently unrelated operator action is performed (for example, to resize the window or by double-clicking a field name).  Waveform to XY charts don't seem to have this problem.

  Anyone know a work around?  I think I saw a similar topic on the forums earlier, but I'm sorry that I am unable to find it now

  See attached vi.

  Thank you

  -john

  I should probably have joined the last post of VI, but I have has been a thread of error between the two loops.  I also deleted the text you had so I could see the I need to press the button.

• Issues related to the cell property node: Position Active for a table control

  Hello

  What determines the Position of the Active cell in a table control property node? I have this in my code and display the value of an indicator on front panel. The displayed value is always set to 0,0. Help for the property node says it's "read - only" so what defines the Position of the Active cell in a table control value?

  Define you the active cell with a property node.  Once you select an active cell, you can do this cell and single cell-specific things, things like the background value color.

• Local property node on the VI Analyzer VS variable

  Hi I'm preparing my review of CLD. I had this problem...

  I learned that there are two methods to update the icon on front panel using the value of the variable local node and property

  It is not a good method to update an indicator using these, but if we want to update a control, then there is no choice...

  CLD NOR recommend using the property instead of the local variable node, but when I run my code on the VI Analyzer he created an event

  believing that it is better to use a local variable for good performance...

  ???????

  Yes, the text is correct. Property nodes are useful to access things like visibility and string [] in the control of the ring, but for the value, it is much slower than a local variable.

  One of the advantages is that there wired error so you can force the data stream, and given that the nodes property are executed in order, you can use a property expanded node to find out what order things occur, especially compared to a free local and free property node, in which case you would be forced to use a sequence structure where ofc is a bad solution.

  /Y

• You can change the background color vi with a property node?

  I was wondering if it was possible in Labview to use a property node to change the background color of façade for an iteration, then back to an original color later. I don't think it's possible, but I would like to know for sure.

  Thank you

  Jody

  You can get the property pane directly node by right-clicking the scroll bar on the front panel and create-> property Node-> color pane.  Useful with multiple panes.  You can also click the property pane node in example of (imstuck) and choose link and then select the pane.

  

• Programmatic property node

  I'm running into a bit of a problem with Labview which until now we were able to kind of work around, but it is more a problem, we are working on our application.  I'm using Labview as a user interface to control and retrieve the information of a Zigbee wireless network.  Part of our application requires using a large number of Boolean flags on the front panel, each representing a wireless device.  From now on, we from our application with a number of hidden indicators and making them visible one by one like devices introduce yourself on our network; This is a workaround for the fact that he doesn't seem to be a way to programmatically create indicators.  If I want to change the position of a subset of these indicators properties using property nodes, is it possible to programmatically reference an indicator?  For example, that our indicators are named Tag1, Tag2, Tag3, etc..  It would be easier to have a loop that writes the positions to a generic property node that can be referenced to specific indicators, perhaps the entry is a string for the indicator label that can easily be incremented according to the current iteration of the loop for.  Is this possible or is at - it another way to do this?  Thank you.

  Dan

  DanRW wrote:

  .. .it does not seem to be a way to programmatically create indicators...

  This is true; We cannot add new items since she would need to recompile the code running. Your method of masking/display of objects is quite valid, however, and I've seen it used in many GUI.

  ' This code snippet is similar to Jeff, and yet allows you to enter a name of a control (IE LED indicators are considered as controls in the VI server references) and move it by pressing the change Position of "boolean lock.

  

• Continuous text blurry when the image is placed in the graphic block

  I've been using InDesign for over a year and love the software. One thing continues to drive me crazy and I don't know whats going on.

  Essentially when I add a picture in a page layout, often (but not always) the text continuous blur similar to anti-aliasing is disabled (it is not). He has just done again this morning. I laid out a drop business card, text or crispy. I add a graphic block and everythings still OK. I have put my PSD file in the chassis and bang hazy continuous text. If I select and delete the graphic block text sharpens once again to the top.

  I had a lot of situations where he does the same thing, but also sometimes when it is not. I don't see any clear link between what I (or I'm not) do and why this happens. Also, I considered that it was just a display issue and it would be nice when sent to the PDF format, but the quality of the text in a PDF document is noticeable, less with the chart than without it even to the 'press' of quality.

  Any help and suggestions appreciated.

  Jon

  Check the pages Panel and see if there is a check next to the page. This indicates the transparency in the PSD.

  Is your psd have a transparent background?

  Try to open the psd and save in tiff format.

  Select your image in photoshop and create a path. Change the path for a clipping path.

  Save it as a tiff file.

  Place the tiff.

  Go to object > Clipping Path Options

  Choose the path that you created in photoshop.

  The text is still unclear? Just need to check that it is actually the PSD which is the cause, and what makes a flat tiff with a clipping path will clear up if it is.

  You just need the transparent background if you put the picture on one color other than white, usually. So if the image does not need transparency or transparency background leave it flattened with a white background, while maintaining a clipping path if you need it.

  PSD files are usually very good to place and use in InDesign.

  Well hope that helps something here.

• How can I control the elements in the graphic palette (profile line) via the property node?

  Hello everyone,

  Is it possible to control the elements (graphic palette in the profile of the line) via the property node?

  Greetings zapfle

  In general, you must balance only Min/max property, then you can "zoom and Pan" by program:

  

  Andrey.

• Problem with the Value property node (MacOS)

  Insofar that I tested it, the nodes of property Value (and value (signalling)) do not work under MacOS: value property is a Boolean value, the value (signaling) as a cluster (width, height).

  Even with the Boolean controls, the node does not work.

  Not such a problem in LV 8.6.

  Am I missing something? Is that some 'of use' ? Or just a bug?

  This looks like some sort of problem of indexing with the nodes property as somesort of corrupted installation.  What happens if you just delete the property node and recreate him?

  I filed a digital control and looked at the context menu of the list of the nodes property.  Below value and value (signs) are Visible (which would be a Boolean value) and Xcontrol, that when you bring through the submenus, the first choice is container bounds, a cluster of Width and Height.  If these 2 types of data which are located 2 below in the list match those you found.

  What happens if you take another node in property a few elements upwards or downwards in the context menu?  Fact is happen for other properties, and if so, are thereany properties who agree?

  Here's what look like my property for a digital nodes and I draggged the box up and down to show the natural order of the nodes property.  Notice that I have script installed, so there are a few other nodes property (and the blue box at the top) you may not have.

  

  PS. Verify you the signature.  Kudos button is now moved to the left since the update of the forum.

• Graphic property node indicator position

  Hello! I have several graphic indicators and I want them to appear on certain positions, so I created property nodes where I define their exact position. I have a tab control in my design to separate the 2 pages front and the problem is that indicators are displayed on both pages. I want them to appear only on one page, how do I solve this problem?

  Thank you for your time.

  Hi cocopa.

  On the front panel, if you drag the graphical indicator in the appropriate page then it should stay there. If the graphical indicator has a shadow, it is on the top of the tab rather than inside a page control. In the block diagram, you must have a business controlled by the tab control structure. When you want to adjust the graphic position, have the indicator and the property node in the box to the right page. That should allow you to move the chart inside your tab control page.

  Kind regards

  Daniel H.