Deletion of snapshots automatically using the Snapshot Manager

Similar Questions

• RN104 - problem of "Delete inactive volumes to use the disc." #27199519

  I have what seems to be similar to many other questions.

  I have a RN104 with two 2 TB drives using X-RAID RAID 1 (mirror). I also activated the encryption. A couple of days, we had a power outage and the ReadyNAS close.

  I plugged the USB with the encryption key and he started upward but am now getting the error "delete inactive volumes to use the disk. Drive #1,2 '. And we can access is no longer the actions that have been setup on the NAS.

  All the suggestions/help? We are out of the period of our support.

  Just to close the loop and maybe help someone else who is having a problem, here is what he has done for me.

  I end up paying for support, however ultimately my problem was that when I copied/pasted the encryption key from our secure and saved on the USB password manager, the key had a newline character hidden line the end of it (an artifact of the copy/paste from the password manager) which was originally not to be able to decrypt the volume. I had to use a hex editor to view and delete the character that is hidden at the end of the key, then my volume was fine. So, if you have the above error AND you use an encrypted volume AND you have copied/pasted your encryption key from another source to a USB key, check the key for you ensure that no character hidden inside.

  I had a problem of tracking where we couldn't access or connect to one of the actions. Support has fixed this issue for me, the samba configuration file was empty, for some reason, support it repaired and we are back in business.

• BlackBerry Smartphones New - fatal error during the first update by using the Office Manager phone

  During my first update using the Desktop Manager, there were 13 steps, and I had to unplug to half way through.

  Now when I try to repeat the process, the update gets steps 1-6 and just after reconnecting to JVM (step 6) I get a "fatal error update device software, please try again" I tried several times and it always stops in the same place.  The phone then has the radio turned off, and I have to restore the connections.

  I'm not an irritable person, so any help would be appreciated.

  Thank you!!!

  Never disconnect during an update. Never.

  This is therefore a new phone, follow the instructions below.

  First, remove the battery from the BlackBerry when lit, to subject a minuite, replace and see if it restarts. If this is not the case, continue below.

  First find your operator and the system operating file that you want to use.
  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

• By using the Recovery Manager to repartition the HARD drive

  I started a post a few days back on my pavilion DM1-3014AU netbook that runs on AMD APU-E350, 2 GB of ram and comes pre loaded with windows 7 Home Basic. I had a number of requests because I want to repartition the hard drive, do a fresh install of windows 7 my disc and I also want to keep some of the hp software.

  After going through a few messages in this forum, I learned that we can use the Recovery Manager to do a minimal install, IE windows 7 and only the hp software. That's what I have to do unless I also want to repartition the hard drive.

  I currently have 4 partitions, C drive, hp tools (hidden) and backup (hidden). I have already created recovery disks. Now, my questions are:-

  1. can I use recovery disks or Recovery Manager to delete all existing partitions and recreate my own partitions. This means that I would remove the recovery, tools and backup partitions.

  2. After doing the above I'll be able to do a minimal install (os + hp software) via the Recovery Manager or the recovery disks.

  3. my intutions are that I can accomplish the above two using the recovery disks and not the recovery partition. If the above two steps are possible using recovery discs, it would ultimately have no partition on my hard drive recovery. I will then be able to use the recovery disks in the future to make the same minimum install (os + hp software)

  4. I wouldn't really keep the recovery, tools and backup partitions if they can be of any complacency in the future but the reson why I want to delete them, is that windows 7 Home Basic allows no more than 4 partitions and I want to be able to create at least 4 partitions for my use.

  Any help would be really appreciated...

  Yes Vikrant... it is unnecessary to install UEFI to update BIOS.

  Yes, if you install the update to the BIOS using the link I provided in my previous thead element, you can as a revert to a version of BIOS as soon as possible if you feel that the system is unstable.

  Even if you reparition the whole HARD disk and do a manimized install, you can install the BIOS update in the future.

  Updating the BIOS is independent if you did full recovery or minimizes recovery.

  BIOS update will not affect the use of recovery disks and procedures. You can safely use them in the future without any problem.

  You will use the ability to run F9 diagnostics incase of any software system crash, and you are unable to start Windows.

• Can't remove plugin using the extensions Manager

  I installed my plug-ins in InDesign CS5 using the Extension Manager CS5, the installation is successful. When I select my plugin entry in the list of plug-ins installed and then click on the button Delete, the extensions Manager displays a progress bar and the line disappears from the list, but the plug-in is in the Plug-Ins folder intact!

  What is going on? How to make sure that the plug-in is deleted/uninstalled? Is there a log of errors in the extensions Manager file?

  Thank you very much.

  You can simply remove plugin-manager-type = "all users" and enabled for active - all = "true" in the mxi file and then create again this extension.

• No start page, Google rises and there is no way out without using the Task Manager.

  I used to get the Google search engine at the start of Firefox, with bookmarks bar in side bars and tool at the top. Now, all I get is a Google search page, with a few buttons on the top like images, etc. There is no way to close the program without using the Task Manager. I downloaded the latest version of Firefox and installed, but the problem has not disappeared. Operating system is Windows XP Professional

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  It is possible that the screen is too wide or too high and bars scrolling down.

  • Use Restore or expand in the context menu of the taskbar icon to set the focus to the Firefox application if you do not see the window of Firefox.
  • Open the system menu of the window of Firefox via Alt + space and see if you can move and resize the window (use the arrows on the keyboard).

  If it works, then first close all other open windows of Firefox and then close Firefox via "file > exit/Quit" to save the setting.

  If the above didn't help then see:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Microsoft Money - when closing down, it saves ok but there is a message saying that the operation cannot be completed. I then use the Task Manager to complete.

  I use Money version 1105, 2004 updated.  I have 2 qusstions-

  1. in closing down, it saves ok but there is a message saying that the operation cannot be completed.  I then use the Task Manager to complete.

  2. is there a version of Money that runs this file?  I tried Sunset but does not recognize my file.

  Any help would be great, thanks in advance

  Eric

  For any question on any version of Microsoft Money, ask http://social.microsoft.com/Forums/en/money/threads.

  Make sure your data and Money backup files are in Documents or another non-protected area, not the default money Program Files or changes and updates will not be saved.

  Unless you are in the USA, the version of Money 2005 (released in 2004) 14.0.120.1105 is the latest available. Sunset silver bed only U.S. data files.

  Installation file to Money 2005 International English QFE2 (not for USA, Canada, UK) from Microsoft, including stand-alone updates 1105, is available at http://www.microsoft.com/download/en/details.aspx?id=26922

  Money 2005 UK - QFE2 (the fixed standalone UK Money 2005 file) can be downloaded from the link to http://www.microsoft.com/download/en/details.aspx?id=26915

• How can I farm Metro application other than by using the Task Manager?

  How can I farm Metro application other than by using the Task Manager? If there is no way, please add a close button, Microsoft.

  Hello

  ·          What version of the operating system is running on your computer?

  Alternatively, press ALT + F4 to close the application.

• Need a list of what I can stop using the Task Manager to help play games that are hanging up or jump or stopping programs.

  I know how to stop most of the programs running in the back ground by using the Task Manager and the process tab.  But, I click "Show processes from all users" list is double what it was.  I need a list of what I can finish process without going through the computer off and restart or with on dreaded blue screen.  So I ask if anyone has a list of processes that are sure to stop?  Thanks in advance, Frankster195

  Hi Frankster 195,

  Welcome to Vista forums.

  You can try to perform a clean boot. Check the mentioned below of items.

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use

  http://support.Microsoft.com/kb/331796

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/default.aspx/KB/929135

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is there anyway that I can update all my devices. I do not use the Device Manager by clicking one at a time.

  Is there anyway that I can update all my devices. I do not use the Device Manager by clicking one at a time.

  I have windows vista 32 bit.
  -------------------------------------------------------------------------------------------------
  Re-edit:-I do not use the Device Manager to find all my drivers and by clicking on each of them... one at a time update.
  Y at - it another way to find and update the drivers at the same time and for free.

  Your question is too terse and contains too little information for anyone to
  help you.  Read this article and try again:

  http://support.Microsoft.com/kb/555375

• My Lightroom is not opening. Not at all. Period. It acts like it's going to g then never does, and then I have to use the Task Manager to close. Any ideas?

  My Lightroom is not opening. Not at all. Period. It acts like it's going to g then never does, and then I have to use the Task Manager to close. Any ideas?

  Hi ellync,

  You must disable the graphic processor of Lightroom preferences, but since the opening of its not, you can either method below.

  Please follow the Solution below

  1. Go to edit > preference > Performance > uncheck "processor chart use" If this does not solves the problem then,
  2. With Lightroom closed
  • Access

  C:\Users\YourUserName\AppData\Roaming\Adobe\Lightroom\Preferences    (Where AppData is a system folder / hidden so you may need to enter the name of the folder directly into your browser's address bar or activate hidden folders / system in the Internet Explorer view folder options.)

  • Open the file LightroomPreferences.agprefs
  • Locate the line use = True autobahn (press CTRL + F)
  • Take Autobahn use = False

  
  

  After save the file

  Restart Lightroom

  3. also refer to that link and update GPU if you use AMD map

  Adobe Photoshop Lightroom Help | Problems with graphics cards 6 CC/Lightroom Lightroom and AMD | Win

  Let us know if this helps

  Concerning

  Mohit

• My pdf files that I am editing keeps "freezing" and I have to use the Task Manager to end the program. I have the latest version of Adobe Acrobat Reader DC and I have 10 windows? Is there any solution for this?

  My pdf files that I am editing keeps "freezing" and I have to use the Task Manager to end the program. I have the latest version of Adobe Acrobat Reader DC and I have 10 windows? Is there any solution for this?

  Hi gregs5153218,

  You can't the PDF files to be changed with Acrobat Reader DC.

  You must have the Acrobat application to edit PDF files using Acrobat. Edit PDF files.

  Kind regards
  Nicos

• In the 14 elements - everything works fine until I hit theTEXT tool of "T". Then the program hangs and I have to use the TASK MANAGER to close it. I have 7 previous elements that goes back to the beginning of the 2000s and am very familiar with the elemen

  In the 14 elements - everything works fine until I hit the TEXT tool "T". Then the program hangs and I have to use the TASK MANAGER to close it. I have 7 programs above, which dates back to the early 2000s and am very familiar with the elements. I did the update - but still the same. Anyone got any suggestions?

  A simple reset will often do the trick. Go to this link:

  Difficulty of tool

• Cannot close Adobe Premiere cs 6.  I have to use the Task Manager.  I have 10 windows and uninstalled and reinstalled several times.

  Cannot close Adobe Premiere cs 6 I have to use the Task Manager.  I have 10 windows and uninstalled and reinstalled several times. Anyone know how to solve? 

  Hello world

  I "solved" the problem, or at least found a work around.  The program must be open as administrator.  Right click and open as administrator.

  If we don't do that all the time, set manually as open as administrator every time will strive do - follow the directions on the following link...

  Always run a program in administrator mode in Windows 10 - CNET

• even when I stopped any adobe process using the Task Manager I still get error code 86. the download is at 56% then appears the error message

  as the title suggests I get error message 86 that I close all processes from adobe using the Task Manager and always update fails and the 86 error message reappears. I was stuck with this for 2 days. any suggestions please.
  

  Hello

  Please see Error Code 86 | Cloud Creative

  Kind regards

  Sheena

• Using the Update Manager when he is incapable of vMotion.

  Using the Update Manager when he is incapable of vMotion.

  I have three Essentials licensed 5.0 hosts and vCenter operating on one of them as a virtual machine. All VM runs on the local disk. I'm tired of patching of CLI and want to use the Update Manager. I can easily do that, on the other hand, two hosts where vCenter is not running but obviously not on the host where it is running.

  I have a data store that is shared in the form of a QNAP NAS, but I can't Storage vMotion because of licensing restrictions. I can't do a vMotion "shared nothing" to another host due to the same restriction. It's like a catch-22 situation.

  I have the service window where I can turn off all the virtual machine

  Anyone has ideas on the use of Update Manager in this configuration or do I just forget about it

  Clone the vCenter even to another VM and make the vcenter temp on another host or elsewhere to deploy a new vCenter on another host and update the host from there