DELETION OF SQL 2005

Similar Questions

• Configuration of replication between SQL 200 and SQL 2005

  

  0

  I use two SQL servers

  Server1 = (SQL2000 8.0.2194)

  Server2 = (SQL 2005 9.0.5000)

  Server1 is my editor and Server2 is my Distributor and Subscriber

  For some reason, I managed to create server1 and Server2 server publishing server, but I can't to server2 sonfigure as a Distributor on server1 see error below

  Error 18483: Could not connect to the server XXXX because
  'distributor_admin' is not defined as a remote login on the server

  What could be the cause?

  Thank you very much

  Best regards

  Vusi RAHARISON

  Hey Vusi Radebe,.

  Please reach out to the IT Pro audience in the community support with replication SQL Server TechNet. The link below will take you to the SQL Server instance that focuses on replication issues:
  TechNet - SQL Server - replication

• What is the difference (other than the device/user limit) feature which would prevent me from installing this new software on Small Business Server 2003 R2 SP2, which 'requires' Windows Server 2003 Std Ed & SQL 2005 Std Ed 32bits. ?

  Need to install new software to the main application. Software provider said Windows Server 2003 STD. Ed. (32 bits) and Microsoft SQL Server 2005 32-bit Standard Edition, Cumulative Update package 8 for SQL Server 2005 SP 2, MDAC 2.8 or later.  We have Microsoft Windows Small Business Server 2003 Standard Edition (SP2 R2).

  Software publisher made a special note that 'Microsoft SQL Server sent as part of Small Business Server is not supported. Please contact us for more information about SQL Server Enterprise Edition. "(contradiction?)

  • Small business, fewer than 10 users.
  • Don't use do not Exchange or IIS part included in SBS 2003.
  • I have access to install SQL 2005 Std install/replace on Small Business SERVER 2003

  Hi copenetadmin5,

  Thank you for visiting Microsoft Answers. SQL Forum, I think, would be the best place where you can discuss much more on the above query. Please visit the link below to find a community that will provide the support you want.

  SQL Server forums

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/

  Nice day.

• I try to install the update update of security for SQL 2005 service pake 3. I have vista 2 this update applies to my computer I get an error code ff or c0000005

  I try to install the update update of security for SQL 2005 service pake 3.  I have vista 2 this update applies to my computer I get an error code ff or c0000005

  1. navigate to the following registry key (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL.1\Setup)

  2. find the "Summary" (REG_DWORD), and then change its decimal value from 1 to 0

  3. restart the computer

  4. install the same update.  It should work.

• SQL 2005 update failed. error code 663.

  I didn't know an answer to my previous question, which was:-my computer to stop asking me to update.  I try and it tells me that try to update sql 2005 failed.  error code 663.  This has happened for a long time.  I am a user of the computer only so don't understand not why I need SQL 2005.  Can someone give me a simple answer please.  I run windows XP media center edition version 2002 service pack 3

  You don't need SQL 2005 if you know. You can simply uninstall it from Add and remove programs and uninstalling SQL windows update will not offer you the update and you will not receive an error message, but if you want SQL you have to do is to repair the installation of SQL and the error message will disappear!

• Security update failed for SQL 2005 SP3

  original title: failure of security update

  I keep trying to install an update to security for SQL 2005 Service Pack 3 to windows, but I get the patch installation error message stopped working and its been going on for months, anyone know how to fix it please I need help!

  Try posting in the SQL Server Setup & Upgrade forum for appropriate assistance: http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads

• 5.2 CSA and Local SQL 2005

  After reviewing the http://cisco.com/en/US/docs/security/csa/csa52/install_guide/CSA52IG.pdf for the system requirements, I stumbled on the following.

  Hardware configurations:

  1 single Pentium 4 processor (3 Ghz +) with 2 GB of RAM

  2 dual processor Xeon (2.5 Ghz +) with 4 GB of RAM

  Only 1 hardware configuration supports Microsoft SQL Server 2005 Workgroup Edition or Standard Edition with their limit of 4 GB RAM.

  According to the above documentation, can it really be true that Microsoft SQL Server 2005 Workgroup or Standard ed. does not work with the hardware configuration 2?

  Can someone shed some light on why this wouldn't work or check if it works? I had planned on using the hardware configuration 2 with SQL Server 2005, but now I'm unsure if it will work.

  Each configuration will work.

  (1) SQL 2005 Standard does not have the limitation of the RAM, he's going as high as the RAM of the OS.

  (2) limitation of the memory for the Express and the Working Group is that it will not use that much, not that it will not work if you have more (or less for that matter).

  Tom

• TMS SQL 2005 DB to SQL 2008

  Hello

  I have here a nice problem. We had a former TMS (v.13.1) Server installed to MS 2003 R2 with SQL 2005.

  The export of the DB has been problem free.

  Now, we need to upgrade the operating system to MS 2008 R2 64 bit. We had installed the TMS Version 13.1.2 with SQL 2008.

  How can I import the old DB for new MSDS?

  Who has an idea or if it is?

  Greetings

  Jens Lantermann

  Ditto on what Martin says with regard to the questions of Justin

• SQL 2005 to SQL 2008 R2 update

  Hey everybody,

  I have a MSD (13.0) running on a dedicated Windows 2003 server and has the database hosted on one of our corporate servers running SQL 2005. All the companies getting SQL servers migrate to 2008 R2 at the end of the summer. Has anyone done this type of migration with the MSDS database and what questions or unexpected came?

  Thank you

  Hello Steven

  I'm assuming that you'll upgrade TMS to the latest version as well (13.2%).

  Longer if you follow the procedure documentation and check all the prerequisites and requirement conditions everything should go smooth.

  Please check this link, in particular page 16:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TMS/Install_Guide/Cisco_TMS_install_guide_13-2.PDF

  Also, I highly recommend to install TMSPE that uses the database SQL instead of the OpenDS.

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/tmspe/Install_Guide/Cisco_TMSPE_Deployment_Guide_1-0.PDF

  Please note that you must upgrade your VCS so at least 7.1.

  I hope this helps.

  Rafal

• CLEANUP_USESSAUD is locked in the MS SQL 2005 database

  Hi team,

  CLEANUP_USESSAUD stored procedure is encrypted in the MS SQL 2005 database bydefault.

  Can I know how to open and edit this procedure?

  http://optillect-SQL-decryptor.software.informer.com/

• vCenter 4.1 on SQL 2005 express upgrade to vc5

  Hello

  Am looking for first upgrade our environment for vsphere 5... first step is to vcenter.  I've read a lot of threads on this topic... but each looks different... Some say to database backup and uninstall it all... others suggest upgrading the database to 2008 r2 first, etc.

  VSphere 5 has been out for several months, this is a generally accepted approach for upgrading to vcenter 4.1 to 5 located on 2005 express?

  My configuration:
  -vcenter installed on 64-bit Windows 2008 R2

  -The 32 bit SQL 2005 express database

  -You are looking at using SQL 2008 R2 express as database

  -Looking at on place upgraded on the same server 64-bit currently in

  All advice appreciated.

  ilyo - I just made this update even 2 weeks ago.  See the process I followed here:

  http://communities.VMware.com/thread/393923

  It will be useful.

  Wally

• VCenter DB from SQL 2005 to Oracle Migration

  Hi all

  I am a student if the vCenter DB to SQL 2005 Standard to Oracle migration is possible.

  I already read a lot of documentation and found no clue on that goal.

  Anyone done any? Is it possible and functional?

  Thanks in advance.

  Hello

  There is a thread on the homepage with the same question.

  http://communities.VMware.com/thread/308260?TSTART=0

  So yes it is possible.  But I recommend cool vCenter from a facility.  Either by moving your hosts on manually recreate your pools of files/resources etc, either using a script PowerCLI.  This way you will not end up with a bribery scheme.

• The procedure to upgrade SQL Express to SQL 2005 for VC4.1

  Hello

  Weeks, I successfully passed the VC to 4.1 with the bundled SQL Express. But now I need to spend the VC to save the log more view.  If an upgrade to DB from SQL Express to SQL 2005/2008 is reqired.

  I'm totally unfamiliar with SQL, could someone provide the procedure or steps in detail for the upgrade SQL database in VC 4.1?

  Thank you

  Mark

  See also this KB:

  http://kb.vmware.com/kb/7960893 - movement of the VirtualCenter SQL database

• Migrate from VCenter 4 SQL Express to SQL 2005

  Hello

  I installed VC on SQL Express and you want to migrate the database to a separate server running SQL2005.  Does anyone have step by step instructions on how to do that?  I tried the folllowing, but it failed:

  1. install VC on serperate server and create the database on SQL 2005 - I did it for all the stored procedures would be copied

  2 Backup SQL Express

  3. 2nd stop install VC

  4. restore the backup from SQL Express to VCDB on SQL2005

  5 ensure the VCDB SQL2005 and MSDB peuvent vmuser as dbo

  6 vc origin stop server

  6. change the DSN to the original VC server to point to SQL2005 VCDB

  I used sql authentication and logs of the DSN on the VCDB SQL2005 very well, but when I run the VC Service, it fails to start with event ID 1000, which is a very generic message saying that windows does not have the information needed to display the details of the message.

  Any help would be greatly appreciated!

  Hello

  Maybe this help you.

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=7960893&sliceId=1&docTypeID=DT_KB_1_1&dialogID=73144950&StateID=0 0 77583750

  MCP, VCP

• The upgrade to vSphere + SQL Express to SQL 2005 + new vCenter Server

  Hello world

  It's the scénarion that I have today:

  A node just two HA/DRS cluster with vCenter 2.5 update 4 and two esx 3.5 update 4.

  The environment has increased enough to move from SQL Express to SQL 2005 standard. In the process, I want to upgrade the environment to vSphere and the vCenter move another box.

  I'm quite familiar with the process of vSphere upgrade but I donít know how to move the vCenter to another machine AND I do not know how to go from Express to the standard version of SQL in the process. (I have a SQL machine ready for use)

  I do not know how to handle all the changes here, I thought it would be nice to all move to the new machine and DB so that I could continue with the upgrade to vSphere, if this has meaning or not, I'm waiting for your ideas.

  I hope someone will give me some guidance on moving from SQL Express to SQL and how to move vCenter to another server (of course with a different server name and IP address)

  Thanks in advance for your support.

  I just did something very similar a few Sundays ago and it was really easy.  Refer to the section of the Upgrade Guide that talks about upgrading to vCenter on another Machine... (starts at p. 49).  We went from SQL 2003 32 bits on 32-bit Windows 2003 to SQL 2005 64-bit on Windows 2008 R2 64-bit.  Both are running as VMs - vCenter 2.5 is still there only as a license server - until I get all my hosts upgraded.