Dell 8 Pro venue and SanDisk OTG DualDrive?

Similar Questions

• Dell 8 Pro venue does not charge

  Hi it is a little disappointed with this product also excellent due to a problem loading of all the things to have a problem with. Received my 64 GB on Friday - widely used device over the weekend, do the installation of the latest updates to drivers, bios, and windows. Bought apps, installed some stuff on my card SD etc, had a lot of fun. Now this morning when I plugged it in to charge the little white light does not illuminate and the unit will not charge. Have you tried swapping the cable on the other hand, another charger (maximum up to now only been using the charger from Dell and the cable) all to nothing does not. The charger works - it will gladly charge other devices. Something is wrong with the unit. Worse, it looks like I'm not the only one. http://en.community.Dell.com/support-forums/mobile-devices/f/4586/t/19531607.aspx - I tried all the suggestions in this thread. http://www.aidanfinn.com/?p=15719 normally buy us Lenovo, it's my first Dell machine. Very disappointed. Request a replacement from B & H unit - they are very good. I hope that the replacement is better.

  I found that the only solution was to throw my Dell coming Pro 8 into the trash.

  Now that I have this cheap formerly piece of junk autour, I don't have to worry about whether it will work, does not work. Fee, no load, etc.

  It was the first product of Dell, I bought for many years and because it was so terrible and get it replaced 2 times does not solve the problems AND Support Dell could not help me, because the Microsoft Store where I bought it would not consider return (I paid $289,99 for the dam thing) I decided it would be my last purchase from Dell.

  I also sent an email to my friends and family telling them to refer to any brand BUT Dell for holiday - and if they buy a Dell product, GET a 3rd PARTY WARRANTY!

  It is a Dell / question Intel from the place of Dell 7 running Intel and Android has the same problems of accurate pricing - excuse me, load BUG.

• Place of Dell 8 pro and Microsoft Wireless display adapter is no longer reflects the views.

  To the right,.

  I have a Dell 8 pro place and a Microsoft Wireless display adapter. The adapter works perfectly and I can mirror the views. Then reset my place of Dell 8 pro and reconnected and now he wants to extend only. I even tried to reset the graphics card but without success.

  How can I mirror back on my place of dell 8 pro and Microsoft Wireless display adapter?

  Bobby Burgess

  I worked on this issue for hours.  And the answer is: there is an update to one of the drivers DV8P, the driver of the Intel platform, bringing the clone feature.  Available through Dell for the DV8P and the direct link below product support page.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=3VR67&

  Hours, I tell you.

• Dell coming Pro 11 (7130) does not work with dock station (K10A) and mobile keyboard (K12A)

  Hello! There is a problem with my Dell place Pro 11. The Tablet does not work in conjunction with a docking station with a keyboard with battery docking station. The problem with the docking station, is only the work of power and audio connector. More is running, no ports (HDMI, USB, LAN). The problem with the keyboard, the touchpad and keyboard do not work. Once the battery is connected. Windows 8/1 Pro 64 bit is installed, the latest drivers and BIOS (A15). Without docking station and keyboard shelf works well. USB and HDMI ports on the tablet work well.

  What can I do?

  Thank you!

  Hello

  same problem here. Both my dock and travel keyboard no longer works. Only my dock workload but not USB, etc.

  I've updated my 7130 windows 10 with the latest bios drivers but no luck.

  Time for dell start with patches!

  Benny

• meeting place for Dell 3845 pro 8 screens stays on when stop and reload.

  My dell screen pro 8 place stays lit when the unit is plugged in and charging when the charging is completed, the screen turns off. is this normal?

  herrmant

  My dell screen pro 8 place stays lit when the unit is plugged in and charging when the charging is completed, the screen turns off. is this normal?

  # It is not normal, but I don't know why it's happening.

• Meeting place for Dell 5855 Pro 8 its fluctuating level

  The sound from the speaker on my new venue Dell 8 Pro 5855 seems to be up and down randomly. This issue does not affect the built-in loudspeaker, the headphones work fine. I tried to update the drivers, do an image restore factory and various applications, nothing seems to help.

  Is this a firmware issue, or is there something wrong with my speakers?
  It is running Windows Pro 64-bit 10.

  It was definitely a hardware problem. I sent it to Dell and they replaced the motherboard.

• Room Dell place Pro 8 USB mic?

  I have a Dell place Pro 8 with a broken micro-USB port.  The tablet belongs to my daughter to years of high school.  I think she may have plugged in upside down too many times.

  Dell wants $269 to repair (Exchange motherboard).

  Anyone know or knows where to find the part number for the Micro USB connector that mounts to the motherboard?  I am sure that Newark or Digi-key sells an equivalent and I would try to replace me.

  Aunt Pitty Pat

  I have the same problem and this is a problem since the day I received the tablet.  I love the Tablet apart from that.  Now after 1 year use, pin micro usb port is broken and I'm stuck with a useless tablet.

  Actually, you're not: there are repair services via eBay that will replace the port (and even one of the services will use a port that is clearly only 1 lane).  A single service: MYdeviceRepair, $29.95 including return shipping:

  http://www.eBay.com/ITM/Dell-venue-Pro-8-tablet-repair-for-micro-USB-charging-charge-port-connector-/321670929154?PT=LH_DefaultDomain_0&hash=item4ae514db02

  Other services:

  http://www.eBay.com/Sch/i.html?_FROM=R40&_trksid=p2050601.M570.L1313.TR0.TRC0.H0.Xdell+venue+8+Pro+repair.TRS0&_nkw=Dell+venue+8+Pro+repair&_sacat=0

• Master Pro XP and XP Home Slave - cannot see all files on the slave

  Hi all

  I had an old Dell Dimension, who dies, who was running XP Home. so, I removed the old hard drive and installed as a "slave" drive in a second Dimension of Dell running XP Pro. The system XP Pro recognized and installed the old XP Home hard drive as a slave with no problems. I can see a variety of directories and files on the drive slave (even the Windows directories and program); However, I don't see the 'Documents and Settings' from the old system. And of course, that's where all the data I want to access to lies. When I look at the two drives under "my computer" (XP Pro System), the (s) 'total size' and 'free space' seems correct; So, it seems that the data is there. I can't do it.
  You can provide any help will be greatly appreciated, thank you.
  Reed
  (* E-mail address is removed from the privacy *)

  No idea if it will work, but make sure that hidden files are able to see, you can also try to go to start and run and type something like "d:\documents and settings" replacing the d: with your other drive, but keep the quotation marks :D

• Windows 10 on Dell coming Pro 11 32-bit Installer

  I'm trying to install WIndows 10 on Dell coming Pro 11 of 32 bits of the USB tablet. A key USB with Rufus and also media creation tool downloaded from Microsoft.

  From the USB on the Tablet brings the configuration for Microsoft Windows 10 with the language configuration menu. This is how far it goes. I can't select something in language settings, it does not it is stuck, I think. Tried 2 tablets 5130 but same result. Tried to format it in fat32 for uefi boot key and tried nfts. With fat32, is to show the Setup language screen, but noting happens does not not on the two tablets.

  If anyone has installed WIndows 10 shelf Dell coming Pro 11 5130 of 32-bit Windows USB 8.1 and how?

  Ahhh that looks the same then. I have a docking station, so I was able to connect a mouse and do it this way.

  I just downloaded the 64 bit version and installed. touch screen works even in the installation process!  give that a try!

• Problem Dell place Pro 8 HDCP

  I recently bought a Dell coming Pro 8 64 GB.  I'm having a problem with playback of HDCP content protected.  For example, Vudu.com cannot disseminate ultraviolet HD movies on the device, saying the output and the display must support HDCP.  I did all the updates of Windows, but it has not solved.  Is not that a released devices in 2013 is not HDCP.  Does anyone have a suggestion on how to solve this problem?

  Update: this problem is now resolved on my unit after update to the last version of the BIOS (A09) and the latest chipset driver (603.9600.2067.27988, A05).  This is good news.  Even if I had the Tablet for a year now, I still use it a lot.

• Dell coming Pro 11 (7130) is no HDMI or DP output when it is docked

  How do you get this do display on an external monitor connected HDMI-HDMI to a docked DELL P2314T?
  The USB connects fine to the touch than FO the monitor characteristics, but I can't seem to display.

  As far as I know that the place does not even see other display options, is there a driver I need to download to make it work?

  Ethernet and USB 3.0 on the dock services work fine. Ive tried 2 place pro 11 and 2 different docks, the same question.

  Hello

  Please update the smart connect and the driver from the chipset, let me know if this helps.

  Connect chip: http://dell.to/1hN5EhD

  Chipset: http://dell.to/1fHuyk7

• The power supply Dell place Pro 11 (7130) may be used without danger to charge other devices USB microphone?

  I am trying to determine if it is safe to use my Dell place Pro 11 (7130) - power to charge other devices via micro USB 5v of power.

  That is, phones, tablets, Bluetooth devices (keyboards/mice/headsets).

  I am trying to determine if it is safe to use and avoid carrying more then once Charger Micro USB.

  Said the label on the place of meetings 11 Pro Dell 24W AC adapter charger

  Reference output Dell: 19.5V OR 5V 2A 1.2.
  HA24NM130 / DPN: KTCCJ
  CN-0KTCCJ-75661
  3CP - 0C 11 - A00
  DP/N 0KTCCJ

  I understand that some devices may not charge, I want to make sure that the voltage is 5V for devices usb and not 19.5V, since there 'or' on the label.

  I tried it on a tablet of 5V and it seemed to load correctly: nothing caught fire. Which is in any case an authoritative answer.

• I have a macbook pro 2010 and already have updated twice.  Should I move a third time?  I was in the apple store some time ago and they told me not to upgrade a third time.  Can I update or not and why?

  I have a macbook pro 2010 and already have updated twice.  Should I move a third time?  I was in the apple store some time ago and I was told that I should not upgrade again.  Can I update or not and why?

  Upgrade what to what? We don't know what you're asking. Writing an effective communities of Apple Support question.

• Captian El 10.11.6 running on my Mac Pro 2012 and it is slow suggestions

  Captian El 10.11.6 running on my Mac Pro 2012 and it is slow suggestions

  You can view a report of etrecehck for later analysis

  www.etrecheck.com

  BTW the 'Mac Pro' is a desktop system, the MacBook Pro is one of the three Apple laptop models.

• Mac Pro CPU and GPU upgrades

  Hello, I am looking to buy a Mac Pro 2008 and had a few questions. 1. I found I can pass of say a 2 X 2.80 GHz 2 x 3.0 GHz CPU, but I looked up a few processors (from my MacBook Air i5 2013) and one very well like i5 Core 6600 k in guides and found compared to my only MacBook, it is barely faster , but compared to the 6600 k, is pretty lame. So I would like to know if I can put a more modern, faster CPU in the Mac Pro. 2. I saw you pass GPU also through multiple models of Mac Pro, but a similar question, wondering if I can swap in a GPU more modern. I'd be by accepting a list of compatible CPU / GPU if it works.

  Thank you!

  -Micah

  See:

  http://www.xlr8yourmac.com/systems/2008_MacPro_Dual_X5482s.htm

  ORS.html http://www.everymac.com/Systems/Apple/Mac_pro/FAQ/Mac-Pro-How-to-upgrade-process

  http://forums.MacRumors.com/threads/early-2008-Mac-Pro-processor-upgrade.1586171 /.

  However, your options are limited since the latest processors will not functionally work in a 2008 although they will be inserted into the socket

  -For graphics, updated map see:

  https://discussions.Apple.com/docs/doc-6592

  I would not get a Mac pro prior to version 2009. They use the FB-DIMM memory that run hot and often fail. Get an MP 2009 or later