Dell Bios pro 11 venue shows no boot order after loading default

Similar Questions

• Re: Satellite Pro A40 - cannot find the boot order in the BIOS

  Hi, we have a very old A40 Satellite Pro with a new hard drive.

  We are tryng to change the boot order in the BIOS to recognize the CD player ready for the windows disk. However, there seems to be no option to change the BIOS not boot order, and Yes, we tried the road from Toshiba which suggests press C during startup until and F12 to select the drive during boot, or what kind of work.

  Please can someone help?
  concerning
  Karl

  PS: The current message on the screen during startup is THAT BOOTMGR is missing

  Hi karl1966,

  Have you checked if the CD/DVD drive is recognized correctly in the BIOS?

  Maybe your drive is noisy and you should try another. I put t disc you used but try with Toshiba and Microsoft Windows disk recovery disk.

• Satellite Pro A60-138 PSA65E - cannot boot from c WEIRD

  Hello
  I bought this laptop on ebay, with no cd or manual.

  Satellite Pro A60 GR
  MODEL PSA65E-01K032GR NUMBER

  Hard drive is formatted.
  I tried to install xp, because I start the laptop it just says: "control system.
  Then press [F1]. "If I press F1, it tries to read the cd and gives up after a few seconds.

  If there is no cd in the cd drive there simply nothing.
  I tried to start the bios menu but everything works,(F12,F8,del) key.

  Is there something I can do?
  installing drivers or anything like that?

  Hello

  In order to access the BIOS please press F2, then ESC.
  This should load the BIOS and you can change the boot order there.

  In addition, you can press F12 at the beginning.
  This will allow the menu on the screen where you can choose the STRANGE as a source of start-up.

  But are you able to boot from another CD?
  The CD/DVD drive is unable to read the disc, and therefore the boot process fails

  You could also burn this disc Win XP on another CD and could use the new disk to the start I did with my old laptop because the CD/DVD drive didn't read the old CD.

• Reference Dell place 11 Pro - problems with the PXE boot

  Before buying a large number of these tablets (11 Pro 7130 venue), I have to ensure that they can be deployed from MS Configmgr (2012). So far, I have no chance for our test model to perform a PXE boot.

  Following the instructions documented by Dell here:

  

  I have a USB dongle to Ethernet Lenovo based on the AX88772B chipset... that is supported according to the documentation. However, try to perform a PXE boot, the screen hangs on the message:

  -----------

  check for the presence of media...

  on ipv4 pxe boot

  -----------

  After awhile, it starts up and then hard disk. BIOS version is A14.

  Any help would be appreciated!

  We have solved this problem by following these:

  

  

  .. DHCP basically has to manage a little different UEFI devices.

• Dell 8 Pro venue does not charge

  Hi it is a little disappointed with this product also excellent due to a problem loading of all the things to have a problem with. Received my 64 GB on Friday - widely used device over the weekend, do the installation of the latest updates to drivers, bios, and windows. Bought apps, installed some stuff on my card SD etc, had a lot of fun. Now this morning when I plugged it in to charge the little white light does not illuminate and the unit will not charge. Have you tried swapping the cable on the other hand, another charger (maximum up to now only been using the charger from Dell and the cable) all to nothing does not. The charger works - it will gladly charge other devices. Something is wrong with the unit. Worse, it looks like I'm not the only one. http://en.community.Dell.com/support-forums/mobile-devices/f/4586/t/19531607.aspx - I tried all the suggestions in this thread. http://www.aidanfinn.com/?p=15719 normally buy us Lenovo, it's my first Dell machine. Very disappointed. Request a replacement from B & H unit - they are very good. I hope that the replacement is better.

  I found that the only solution was to throw my Dell coming Pro 8 into the trash.

  Now that I have this cheap formerly piece of junk autour, I don't have to worry about whether it will work, does not work. Fee, no load, etc.

  It was the first product of Dell, I bought for many years and because it was so terrible and get it replaced 2 times does not solve the problems AND Support Dell could not help me, because the Microsoft Store where I bought it would not consider return (I paid $289,99 for the dam thing) I decided it would be my last purchase from Dell.

  I also sent an email to my friends and family telling them to refer to any brand BUT Dell for holiday - and if they buy a Dell product, GET a 3rd PARTY WARRANTY!

  It is a Dell / question Intel from the place of Dell 7 running Intel and Android has the same problems of accurate pricing - excuse me, load BUG.

• In the BIOS boot order stopped showing my external DVD player

  I use a laptop HP Compaq presario V3000 series, model no. V3018TU. I use a DVD drive with her as my internal DVD player does not work properly.

  External DVD drive functions correctly after windows starts. The problem is that he displayed in the boot order. I want to install Ubuntu alongside with XP. I am not able to give priority to installing Ubuntu on boot as it is not showing in the boot order. After starting my laptop, it starts to load XP.

  That's what I was doing just before this problem arose. Everything was fine. I was installing Ubuntu along side Windows XP my laptop and in-between the installation got stuck and my hard drive was not working when I rebooted, I made my hard drive to work somehow and then I found another problem, i.e.my external DVD drive is not showing in the boot order. All the other things i.e.my hard drive, internal DVD player (does not work correctly) etc., appear but except for my external DVD player. I need my external DVD player to display in the boot order to install ubuntu.

  Help me fix the problem. Thanks in advance.

  @Dinesh

  Here you go...

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3195407&prodTypeId=321957&prodSeriesId=1817055&swLang=8&TaskID=135&swEnvOID=228

• Dell Latitude 10 ST2e compressed can not boot from an external USB optical drive

  Dell Latitude 10 ST2e compressed can not boot from an external optical drive USB (CD/DVD)

  The BIOS has no setting for it. It will boot from a flash drive. I would like to boot from my CD of 2013 Acronis Recovery Console.  Anyone have any success to boot from a CD/DVD USB drive?

  Yes, there is a way to do this.

  I just did this to install Windows 10 from a DVD on a tablet of 10 Latitude by following these steps:
  (Note: my version of BIOS is A08)

  1. turn off the 10 latitude power.
  2. attach a USB hub to the USB slot unique on the side of the tablet.
  3. fix a keyboard and an external USB CD drive to the USB hub.
  4. now press the button down on the side of the Tablet and simultaneously press the power button for 5 seconds (until see you the screen light up, but will be weak against black unlit).
  5. When you see the Dell logo, start typing on the F12 key (the lower right corner shows the option press the F12 key to choose single startup options)
  6. now start choosing appear with many options to choose from, including my CD/DVD drive.

  Hope it will be useful to you.

• Windows 10 on Dell coming Pro 11 32-bit Installer

  I'm trying to install WIndows 10 on Dell coming Pro 11 of 32 bits of the USB tablet. A key USB with Rufus and also media creation tool downloaded from Microsoft.

  From the USB on the Tablet brings the configuration for Microsoft Windows 10 with the language configuration menu. This is how far it goes. I can't select something in language settings, it does not it is stuck, I think. Tried 2 tablets 5130 but same result. Tried to format it in fat32 for uefi boot key and tried nfts. With fat32, is to show the Setup language screen, but noting happens does not not on the two tablets.

  If anyone has installed WIndows 10 shelf Dell coming Pro 11 5130 of 32-bit Windows USB 8.1 and how?

  Ahhh that looks the same then. I have a docking station, so I was able to connect a mouse and do it this way.

  I just downloaded the 64 bit version and installed. touch screen works even in the installation process!  give that a try!

• MacBook pro mid-2010 shows prohibited signs

  Hello Apple community, I need your help in reality two days ago my macbook pro mid 2010 running os x el capitan died suddenly following an unknown error, when I turned it on I noticed a forbidden error kept showing once more are trying. I did reset PRAM in now command + option + r + p + button / stop but no luck after I did ctrl + option + shifit + button / stop but mac not answered because it showed the apple icon and after a short loading showed me to new forbidden sign, after that I tried to boot into recovery mode of the internet now option + command + R , but I can not moved to internet recovery mode (I have not installed update efi) sometimes it shows exclamation mark sometimes it Boot normally without mode recovery story prohibited sign arrives without showing the connection.

  I've also done manually the alt key recovery mode I saw the recovery partition it and I clicked on recovery mode 10.11.3 after that click apple logo comes up and after loading it again once showed me prohibited sign instead of os x utility. I did everything and worked hard to solve this problem during these two days, but I couldn't solve my spirit is skipped now. Please help me how I can bring life in my macbook again.

  Sorry for my English thanks to you all

  Everything you described point to a failing HARD drive or possibly a bad SATA cable.  Remove the HARD drive, install it in a well known pen, plug it into the MBP via USB and start the MBP with the OPTION key down.  If the HARD drive icon and the MBP, boots, inner cable is the main suspect.  If it doe does not start the MBP, the HARD drive failed.

  Ciao.

• HP laptop: when I start my laptop it will be showing "no boot device."

  When I start my laptop it will be showing "no boot device."

  Hey @Swapvb

  First of all, I want to you welcome to the Forums of HP Support! On the forums, you will find solutions, suggestions and helping hands!

  I understand that you can't your laptop because you do not receive a message from boot device.

  The error message says "Boot Device not found"? If so, please use the Boot Device found not or Hard Drive not detected error document.

  Here, I have provided a list of measures to try with an additional documentation if you need. Please try to:

  • Perform a hard reset
  • Restore the default settings of the BIOS
  • Perform a test equipment
  • Reconnect the hard drive

  If none of the steps above troubleshooting solved the error condition, please make sure that you back up your personal data from your laptop, and then try again to perform a HP system recovery again.

  If the recovery of the system is not yet functioning, please use the document Troubleshooting an HP System Recovery .

  If this answer helped, please use the button accept as a Solution . If you want to give me a five high virtual, please click the Thumbs Up icon below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of troubleshooting as well as your model number (How can I find my model number or product number?).

  Thanks for joining the community of support HP!

  Have a great day!

• Satellite Pro A200 - system does not boot

  Hello

  wondering if someone could help?
  My Satellite Pro A200 with windows XP does not start. It starts with the Toshiba screen.
  Then goes to a screen black with text where it says "PXEE61 media test failure - check cable" (I have no cable) then said out of PXErom; moves to the next screen, which lists the options: safe mode; safe mode with networking; safe mode with prompt local; Last Configeration well-known; Start windows normally.

  Which have been tried and results in loading from page turns on for about 20 seconds, then just to abandon and trying all the whole process again (before flashing a blue screen) Windows.

  Nothing seems to work - tried to take the battery on a... number oftimes and the power cable, but nothing helps.
  It's already happened, but after a few false starts gets going - but this time he just don't come out it. I could not take others where locally, but I would prefer not to because I live in Spain and need the laptop as soon as possible and do not know, I want to leave it in some otherwise are hands to the risk of wipe them the hard drive.

  So, I would be very grateful for any help as soon as possible and I fear tech short hand maybe having to explain.

  Thanks a lot, a lot.

  Hello

  I think the problem is that the operating system is not found on the HARD drive.

  The test failure PXEE61 media - check the cable appears especially if the laptop tries to boot from LAN.

  Why the laptop is trying to boot from the local network?

  Well,.

  -option may be the LAN was chosen first in the boot order in the BIOS
  -Maybe the drive is defective and so the laptop is trying to boot from LAN
  -the MBR (master boot record) is may be defective

  I think you should take the Toshiba Recovery CD and need to format the HARD drive and needs to be reinstalled the operating system.
  This should help.

  If not, then the HARD drive could malfunction and should be replaced!

• "No boot device" after the BIOS doesn't load the Satellite L50 - B - 25 c

  A friend who bought this laptop came up to me, explaining that he does not have to install an operating system. Then I tried it myself. I dusted off my original windows 7 pro 32 bit cd he jumped into the tray to cd and tried to boot from the cd by using the boot menu and bios boot order. the operation failed and even through I have cd was recognized by the bios the laptop not returned "no bootable device - restart device" error. So I tried to boot from usb NSB each usb port. The same unsuccessful result that happened. I then tried a USB bootable win7 64 bit and also failed.

  Anyone have any ideas why the laptop is not booting? Could there be a part that is DOA? What is a bios problem? Council of State, I think to Flash the bios.

  This laptop is brand new and never had anything installed on it.

  Thanks for the help!

  HARD drive is recognized correctly in the BIOS?
  If you want to downgrade from the Win7 machine, you must change secure boot option in the BIOS.

  http://APS2.toshiba-tro.de/KB0/TSB2C03F80002R01.htm

  You already changed option UEFI?

  By the way: before installing own version checking OS, which version of Windows is supported for this machine.
  Visit the download page of Toshiba on http://www.toshiba.eu/innovation/dow...ivers_bios.jsp and which operating system versions are fully supported with all the necessary drivers, tools and utilities.

• HP envy m6-K015dx: how to remove/reset password BIOS of HP envy m6-K015dx in order to change the boot order

  I'm trying to install a new copy of windows 10 but currently it does not show an option to boot from usb. There are only two options i.e. BONE Boot Manager, BOOT from the file of EFI. I need to go into BIOS to change the boot order, but it asks for administrator password.

  I don't remember set the BIOS password on my laptop, and yet I've tried some of the passwords mentioned on the forums but none of them worked. I can't remove CMOS battery, which is part of the solution, because it requires for me to disassemble the laptop.

  Please suggest me any solution that I have not been able to understand all other sources.

  Note: USB is made bootable and perectly to work on another pc.

  System information: -.

  HP envy m6-K015dx

  Windows 10

  Itkhan.

  When asked for the password enter 60862899

  REO

• HP 17.3 E0067cl UEFI BIOS. boot order fails.

  total of history: end-to-end.

  subject, the flash player. 23 to 32GB (mine is 32 Sandisk USB3, extreme, written 100 MB/s.

  will not work with rebecca, or (what we call it now)

  It won't work, create backup USB flash, "" create the recovery disk ".

  It just shows the "daisy" spinning throughout the day.  on a brand new laptop HP, 20 July 2014, new in box.

  I just ran sfc /scan now and spend.

  my best guess it that windows update to 8.0 (100) killed this "feature".

  or my 8.1 updated. (toss the coin)

  I ordered the new installation of HP for $18 disc...

  so bad to close this topic, with "operator error", never update then try running to build your own, backup media.

  RIP

  later...

  the second problem is that the bios does not allow. My next update.

  a new SSD.

  I got it to work.  but the BIOS does not see the two disks. ! (in bios boot order) UEFI.

  I solved this problem by removing the 2 left 1, the old HARD disk.

  now the SSDS works like the lighting and the BIOS, can be ignored.

  I used Acronis to make the all the steps above tib files and evolutions'm so good... and made and a huge external drive.

  problem solved.

  closed...

  This has something to do with what we were talking about earlier on recovery and flash player?

• Meeting place for Dell 5855 Pro 8 its fluctuating level

  The sound from the speaker on my new venue Dell 8 Pro 5855 seems to be up and down randomly. This issue does not affect the built-in loudspeaker, the headphones work fine. I tried to update the drivers, do an image restore factory and various applications, nothing seems to help.

  Is this a firmware issue, or is there something wrong with my speakers?
  It is running Windows Pro 64-bit 10.

  It was definitely a hardware problem. I sent it to Dell and they replaced the motherboard.