Add a fill between two col-lg-4...

Similar Questions

• Is it possible to add a breakpoint between two of the existing breakpoints?

  See the subject line. Basically, I worked on a project that has four different breakpoints (next to "default")... and I just realized that my breakpoint (i.e. smaller) to the left is too big, and I probably should have broken it into two.

  It seems that the only way to add a breakpoint is when you are in the display size of "default"... but I need to position this new breakpoint at the other end of the spectrum. Is this possible? I pourrait add it on the right side... but that would mean completely reconfigure a bunch of details about every other size of the screen. I don't know if I explain what I ask properly. Laughing out loud

  Image:

  

  Of course, simply double click on the rule?

• How to add images between two elements

  I'm having a great time to find it.  I was asked to add an image between two elements.  Here's a mockup of what the layout with the image will look like:

  

  But I tried everything and I keep breaking the code and can't make it work.  I did a stripped down version of this page so you can see what the code looks like:

  Homepage

  Any help is appreciated.  Thank you.

  This will get probably get a bit of a hole - (MAKE A BACK-UP OF YOUR PAGE FIRST)

  Find the code below:

  http://www.amazon.com/Reclaiming-Parkland-Bugliosi-Assassination-Hollywood/dp/1626365334/r ef = sr_1_1? s = books & ie = UTF8 & qid = 1378592566 & sr = 1-1 & keywords = recovery + Parkland"> Amazon.com»

  Get rid of all the code that follows - down up to this code:

  The decline and fall of Jim Fetzer

  Copy and paste the code below instead:

  Image goes here

  Press articles

  Comments

  News

  Then style upward a little h2 tags with some css:

  I'll let you get back links/anchors on the h2 tags.

• Add the padding between wrapped text and image

  Hello

  How can I add a filler between a picture placed in a text box and the text wrapped around it?

  Thank you!

  Use the Panel layout and Offset (German: Versatz)

  Fenja

  

• "Limited connection" when you configure the network between two computers XP.

  Original title: Configuration of the network connection

  Trying to establish a network connection between two home PCs., both running Windows XP Pro. Have been through the network on both PC Setup Wizard but, they still say limited, in fact no connection. I use an Ethernet cable between the two Crusader. If it is true what I'm doing wrong?

  Thanx Terry

  Old but good, networking tips from MVP Malke, MS:

  The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

  The router configuration

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.

  2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

   

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• calculation of duration between two events

  Hello guys

  I found a lot of information here how to calculate the difference in time between two events. The application I'm working with has a strange time resembling the export:

  

  The date looks like jj-mm-aa which I want to turn the date in dd-mm-yy format for easy sorting and I want to have the time difference in hours and minutes between two events. I thought the first thing to do is to extract the time information, then transform the date into the aa-mm-jj and calculate the time difference from these two. Can someone help me with this?

  Thank you very much

  Hans

  Hello

  You can try something like that.

  

  Table 1
  
  A1  date time string
  A2  20-03-16 00:52:22
  A3  19-03-16 01:26:17
  A4  18-03-16 01:41:30
  A5  16-03-16 00:01:08
  A6  11-03-16 23:40:42
     
  B1  date time
  B2  =DATE("20"&MID(A2,7,2),MID(A2,4,2),MID(A2,1,2))+TIMEVALUE(TIME(MID(A2,10,2),MID(A2,13,2),MID(A2,16,2)))
  B3  =DATE("20"&MID(A3,7,2),MID(A3,4,2),MID(A3,1,2))+TIMEVALUE(TIME(MID(A3,10,2),MID(A3,13,2),MID(A3,16,2)))
  B4  =DATE("20"&MID(A4,7,2),MID(A4,4,2),MID(A4,1,2))+TIMEVALUE(TIME(MID(A4,10,2),MID(A4,13,2),MID(A4,16,2)))
  B5  =DATE("20"&MID(A5,7,2),MID(A5,4,2),MID(A5,1,2))+TIMEVALUE(TIME(MID(A5,10,2),MID(A5,13,2),MID(A5,16,2)))
  B6  =DATE("20"&MID(A6,7,2),MID(A6,4,2),MID(A6,1,2))+TIMEVALUE(TIME(MID(A6,10,2),MID(A6,13,2),MID(A6,16,2)))
     
  C1  duration
  C2  =B2-B3
  C3  =B3-B4
  C4  =B4-B5
  C5  =B5-B6
  C6  =B6-B7
  

  Notes.

  Formula in B2 and C2 can be filled down.

  Table is designed with numbers v2.

  Kind regards

  H

• CD part downloads between two iTunes accounts on the same MacBook Pro

  We have a MacBook Pro shared between two users

  Can I share a CD downloaded on two iTunes accounts, without using home sharing?

  I don't really want to download the same CD twice as that would waste space unnecessary.

  Thank you

  Without using home sharing...?

  I guess it's technically possible if you put the iTunes Media folder to somewhere that is accessible from the two user accounts, but which will cause more problems than it is worth.  For example, you can add new songs in your iTunes library and the other user iTunes library will not know about these songs.  Or another user can delete music files, while your iTunes library expects that these records of songs to always be there.

• Take the time between two values

  Hi people,

  I have a problem and I know idea how to solve... I need help.

  The problem is I want to take the time between two values max as you can see in the chart.

  For example, in the image that I have add

  4.5 - 1 840 = 2.66

  And enter this value in the 'time between mostra '.

  It's that I want...

  But what I think is very complicated, because I don't know how to take the time correctly and does remove...

  Thank you very much

  Any solution?

  Hi jocuma,

  I tried something and hope that helps u.

  Just create two arrays of temperature and voltage. First of all, I'll get the value of the voltage when it is more of a certain value and that same index to get the value of time and store in the shift register.

  When I get the second higher than the limit value, I'll get time and subtract the previous value.

• The way of writing to a wireless bridge between two different routers.1:broadband and dir 2:dlink 605 l

  I want to bridge.and wireless I can't do that... Please send me how to write to a wireless bridge between two different routers.

  1:broadband
  and
  2:Dlink dir 605 l,

  Hi Mohammed Ehsan Jourah,.

  Thanks for posting the request in the Microsoft community forums.
  I understand that you need to know how to make a wireless bridge between two different routers

  What version of the operating system is installed on the computer?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  You can try the steps at the bridge between two different routers wireless.
  a. determine the coverage area. When using two or more routers, the coverage area should be divided, and each router should be placed in a central location in each subdivision. If you add a wireless router to an existing network, this may mean moving the first router.
  b. decide which router is the main router. The main router is connected to the Internet, a LAN cable or other networks. It should be as close to the wired network connections or who has the best line of sight to another wireless network. In addition, the main router should be a high range router, allowing large tables of State and more users.
  c. buy a spare antenna, as the antennas that come with most routers do not have very good range. Quality omnidirectional antennas can push the range and signal strength of each of the routers, which, in turn, will reduce the cost by allowing routers less cover more space overall.
  d. deploy the primary router carefully. This router is the most important and requires most of the time of installation and options. Set the WEP (Protocol) encryption Service Set Identifier (SSID) and wireless, set up the Internet connection and test the router with some clients (computers). Once you get the main router deployed, deploy other routers should be easy.
  e. deploy the secondary routers, which must be configured to operate in "mode of transition." Secondary routers should be deployed around the perimeter of a large area or 'hot spots' where users placed - for example, will convene a bench Park or the table.

  Links:
  Create a network bridge:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-network-bridge

  Add a connection to a network bridge:
  http://Windows.Microsoft.com/en-us/Windows7/add-a-connection-to-a-network-bridge

  Hope this information helps you. If you need to get help or information with decision-making wireless bridge between two different routers, I'll be happy to help you.

• How to switch between two keyboards (Japanese keyboards have the double function of "direct entry"

  I have a laptop with keys 'English' and 'Japanese' on the same key board.  For example "A" key is also 'CHI' in Japanese, 'B' is also "KO" in Japanese.  How to switch between the two.  It changes itself.  This seems to happen after the mail in Hotmail changed in Outlook.

  Thank you

  Tomoko

  Hello

  Please go to the Microsoft Community Forums.

  From the description of the question, we understand that you want to switch between two keyboards entries.

  Let me go ahead and help you with the issue.

  Here are some steps you can follow to resolve the problem:

  Step 1:

  To change the default language, follow these steps:

  a. Click Start and then click Control Panel.
  b. double-click regional and Language Options.
  c. click on the languages tab, click details and then click Add.
  d. under input language, add the language that you want to use.
  e. under Configuration keyboard/IME, click the keyboard layout that you want, and then click OK.
  Note: Only users who have permissions on the local computer can configure the following options on the languages tab in the regional and Language Options.

  Step 2:

  To resolve this problem, change the hot key settings in your computer system. To do this, follow these steps:

  a. right click on the language bar and then click settings.
  b. in the Text Services and input languages window, click the Advanced Settings button select an action and then click Change Key Sequence.
  c. set keys and then save the settings.

  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.

• Help! Static route between two router WRT160NL

  Hi all

  I have my internet connection to connect to my main router from Linksys WRT160NL (192.168.1.1) with 192.168.1.x.

  My 2nd Linksys router to connect to the first gateway as well.
  The 2nd router has the ip 192.168.1.100 WAN and it's a local subnet as 192.168.2.x.

  My 192.168.2.x machines can access the internet and connect to all the machines in the network 192.168.1.x.

  However, the 1.x network cannot access the machines on the network of the 2. And because of that, I can't share or print between two networks.

  I try to add static routes on my main router (192.168.1.1) with the road: 192.168.2.0 mask 255.255.255.0 and default gateway 192.168.1.100

  However, the road does not work yet.

  in any case to ensure that the 1.x network able to access the network 2.x and 2.x access 1.x file and print sharing.

  Thanks for your help!

  Gateway of the router does NAT who made the side inaccessible side LAN WAN, unless you configure port forwarding automatic or similar. If she would not make your LAN 192.168.1 would be accessible from the internet. Static routing will not change that.

  You will need to disable NAT (aka switch to router mode) on the second router. You must configure a static route on the main router then. However, most likely your network 192.168.2 * will not have Internet more because the main router will NAT for 192.168.1. * and no 192.168.2. *.

  If possible set up the second router as access point only and run a LAN.

• Copy of the object between two databases

  Hi, in SQLDeveloper I can copy the objects 'tools-> copy of database... "between two databases such as (tables, views, indexes, triggers, constraints, etc, etc...), but how can I do it with SYNONYMS and GRANT of the object? Thanks for your help.

  You can watch the cart (view > trolley).

  The cart can generate a script to include SUBSIDIES, and you must add synonyms. You can then run these scripts in your target database.

  Drag the table to your shopping cart. Add synonyms.

  Export your basket. Select "grants."

  Decide if you want the data or not.

• I'm having a problem with a transition between two clips in the first.

  I put a transition between two clips, but it works only in a single clip. my project is almost done except to fix those errors.

  

  The handles are how you have before and after the section of the video images you removed in the timeline.

  Imagine you put a video in your editing and you use the clip (from the beginning to the end). Then you try and add a second 2 cross dissolve between the shots. First will have to at least 1 second image to prior to the shooting to make the transition, but because that there are no images more to use is unable to dissolve it in the middle of the Cup.

  You can do it all on a track just like FCP of Vegas, but you must have the images it to dissolve in.

• Netem VM between two virtual machines? Is this possible?

  Hello

  I would use netem on a linux VM between two other virtual machines to simulate latency. Between Netem needs a machine with two network cards that he can fill. I've set up a VM on vSwitch0, a virtual machine on vSwitch1 and then an another VM with two network cards, one on each vSwitch. I thought that I create this box for use Netem and imitate and then between the two.

  Has anyone ever done something like this? I ran into a ton of problems and want to know if people have tried.

  I got it working by following these steps:

  1. create the computer virtual one with a NETWORK card on vSwitch0

  2. create a VM with a NETWORK card on vSwitch1 b

  3. create a VM n with a NETWORK card on vSwitch0 and vSwitch1

  4. set the port groups to vSwitch0 and 1 for the "Promiscuous" mode accept (from the default of rejection)

  5. set the n, a centOS VM VM for a networking interface using two network cards

  Note: maps network of VM's and b VM were located in the same subnet.

  Once step 5 start working and traffic exchange VM has and through VM n. b I have experienced a strong delay 5ms ping where there was a<1 ms="" delay="" on="" ping="" when="" vm="" a="" and="" b="" were="" on="" the="" same="" vswitch.="" i="" came="" in="" the="" next="" day="" and="" the="" delay="" was="" gone.="" no="" idea="">

  All the tricks to bypass and netem being by default in the installation of CentOS 6.4, I was able to establish conditions as the loss of delay and the package on the transport between the VM and VM n and b degraded as desired.

  The reason that I wanted this to be complicated as it is I can take a virtual machine of vSwitch 0 and pop in vSwitch1 and all of a sudden traffic to and since it undergoes degradation due to the conditions imposed by the bridge n Netem the VM configuration.

• Move a virtual machine to turn off between two hosts, shared storage

  Dear Experts,

  Please guide me for the next case. There are two hosts of Esxi, host 1 is Esxi 4.0 and host 2 is Esxi 4.1. There are store data SAN storage that is visible to both hosts.

  I watched solard winds VM monitor utility that hosting 2 consumes 90% of the memory while its processor is ok. On host 1 is normal. So, I want to spend only a few VM of to host 1. So please correct me if what I think are OK. I will turn off the virtual machine to be moved from host 2. Then I it will remove host 2 inventory. Then on host 1, I'll go to the data store in the folder that VM and do a right click on the file 'say add to the inventory' and now I'm going to see this virtual machine in the inventory of the host list, just turn on and everything is perfect, is this correct?

  Second question on the same hosts, there are a few other data stores that are visible to a host. As if this is the case there is a virtual machine on a data store that is visible to host 2 and I want to spend this VM to host 1 to reduce load on host 2. How to move this virtual machine because this data store is not visible to host 1? Will I have to copy this VM files in a data store that is visible to host 1? If YES then what real required to copy files?

  Kindly help me.

  Kind regards

  From your description I m assuming that you use not vCenter to manage your hosts, correct?

  If you have a store of data shared between two hosts you can do the steps you descripte (power off, remove the inventory etc.).

  For your second case there are several ways, it depends on where you want to place the virtual machine in the future. Wouldn't be on the shared data store that already exists or can in the local data store on the other host? Or is there an option to also display the current data store to host 1?

  If you want to copy the VM files copy the whole folder of it.

  Kind regards

  Mario