Dell Latitude 10 ST2e compressed can not boot from an external USB optical drive

Similar Questions

• CD/DVD-RW is faulty and can not boot from an external DVD-R - Satellite A30

  CD/dvd-rw from my Satellite A30 is defective and I bought and started using an external dvd - r, but when I want to format the laptop, the recovery cd does not start, well it starts, I can see what is on the cd, but when it runs the autoexec.bat file he always wants Player x who is my faulty dvd - rw. Is there a solution for this. Is it possible to run recovery from the external drive.

  Thank you

  Hello

  I don't know if you tried, but normally you can press F12 at startup to enter the boot menu.
  Select an external device then it should work.

  Good bye

• T430s: boot from an external USB DVD drive

  I wanted to change the boot sequence to boot from external DVD drive to install Win8. To access the BIOS I hit Enter (empty password I guess) but in the BIOS everything is grey: I can't make changes. What is going on?

  @kaja69...

  Rich said, you have a set supervisor password and Jin Li said, there is no default password.

  For more information on the different passwords at the BIOS level, please consult your T430s Hardware Maintenance Manual (manuals pages 36-38).

  By Community rules, discussion of passwords is a sensitive area and can risk one slows down, so please keep that in mind if/as this discussion progresses.

  Kind regards.

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.

• I can't boot from disk external HARD - Tecra M5

  Hey guys,.

  I tried to start my Tecra M5 from disc external HARD with a clone of my hard drive but it does not work.

  Maybe you can give me some advice for this problem.

  with greetings

  Hello

  > Maybe you can give me some advice for this problem.
  This isn't a problem! It's just not possible!
  Regarding a I know that it of not possible to boot from the external USB HDD

  You can boot from these devices:
  USB FDD, disk HARD primary, SelectBay devices, Network (LAN), SD-CARD

  Good bye

• Can not boot from the CD to recover OS - Portege M200

  Hello

  I'm working on my Portege M200 friends that she bought used. Only, it came with an external USB CDROM drive and the laptop computer AC adapter. To make things better the HD is no longer recognized by the BIOS. I had a spare HD so I installed it and now the BIOS see the new HD, Yay!

  I also discovered that I could buy a replacement Toshiba system recovery CD, new Yay! But before I do that I wanted to make sure I could boot from the external CDROM drive. I plugged the CDROM drive and attempted to start on a spare windows xp CD. But it does not start on the CD. I made sure that the CD-rom drive has been first in the BIOS boot priority, but that doesn't seem to work.

  I read the other posts that mention the boot directly from the external CD-rom USB drive does not work and I have to boot to the CD-rom drive by plugging the CD-rom drive in a PCMCIA card. If I have to buy a PCMCIA card that has USB ports for connecting external USB CDROM drive in for I can boot from a CD?

  If there will be any brand/type of work? If this is not the case, what brand/type is known to work.
  Any advise will be greatly appreciated!

  BIOS of the portege recognise only a limited number of pcmcia-CD-disks

  in this thread you will find all the information you need:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=71179𑘋

  but your portege also boots most of the readers of usb_FDD; If you make a BACK-boot disk with the appropriate drivers for your CD-ROM usb drive you can use it without restrictions bios

  as you can read that this method will work only in a DOS environment, that is why it is absolutely necessary to format your hard drive to fat32, otherwise it will not be recognized

• System crash can not boot from CD/DVD-rom

  Tried to do a restore of widows to correct this problem with CD / DVD rom instead of fix player it now only will start and say 'services starting configuration' and then it will pop a windows 'X' in red saying install Windows - Windows could not complete installation. To install Windows on this computer, run the Setup again. I restart and it keeps reading more and more I bought acer accessories Acer store system recovery discs... but they are unusable because can't boot from the drive to cd/dvd rom please help thank you very much.

  http://www.YouTube.com/watch?v=H2xoMEPfiPQ&feature=player_embedded

• can not boot from the CD

  I have a Dimension 8300 running XP Pro and I am trying to reformat the hard drive and reinstall XP.  I can't boot from the CD.  At startup after F12 and selected to boot from the CD, the sytem always starts on the hard drive. I changed the BIOS boot sequence, but still no luck.  The works of CD to read and write, but no boot from the OS disk.  Once the system boots from the hard drive I can start the CD of the OS that gives me the ability to reinstall XP, but no option to reformat.  My top disc is a DVD-ROM and the second disc is a CD - R.  I tried to boot from both drives, but the machine continues to boot from the hard drive.  Any suggestions?

  
  

• Portege Z930 - impossible to boot from the external USB CD/DVD drive

  I have a portege Z930 14U
  I am not able to boot from an external linke (Samsun SE-218) CD player via USB

  I already set the boot sequence and choosed CSM as model BIOS

  Thank you
  Andrea

  Try disabling secure boot in the BIOS too.
  Then connect the CD/DVD from the laptop drive and switch on the device.
  Press F12 and choose from the menu to boot from the USB device

• Satellite A40: How to boot from an external USB device?

  Dear all,

  I wonder if it is possible to start A40 - 261 (BIOS v1.50) from the external USB device such as a flash or external HARD disk drive?

  Thank you in advance,

  Oleg

  No Oleg, it is not possible to
  You can only initialize the USB FDD, HDD, CD/DVD and LAN

• Satellite A200 - 19L can not boot from the CD

  Hi guys,.

  I'm glad I found this forum site, I pretty well hope to find a solution here.

  Well, this problem is not very complicated, in fact my DVD player (model TS-L632) is not read more, so much so I decided to change with a new one, but it is not the same model as the original drive.
  It is the case of the generic DVD player really.

  Now when I inserted my recovery disk or any bootable disk is not booting the CD, and when I press F12 for I can't find any CD/DVD drive, but running in Windows I can't find the DVD player and it can read any CD priority boot normally.

  Just having the problem while booting from CD.
  I thought that maybe there is no security for this model that locked some hardware.
  So please guys want to help me how to understand it,

  any help would be greatly appreciated.

  Thank you

  > When I press F12 for boot priority I can't find any CD/DVD drive, but running in Windows I can find the DVD player and it can normally read any CD.

  The whole story seems really strange to me
  If you access the BIOS, you can see the details of the CD/DVD drive? The drive is recognized properly?

  If not then I guess that the STRANGE inserted is not totally compatible due to different master/slave/c-salt settings.

  > but running in Windows I can find the DVD player and it can normally read any CD
  It s also strange to me so that the CD/DVD drive appears in Device Manager even if the CD/DVD drive Startup menu option does not appear.

  But first check the BIOS

• C855 satellite can not boot from battery after upgrading W8-W10 Home >

  Hi all

  I have a problem really strang after upgrade my C855 Satellite of Windows 8 to 10 of windows. After the upgrade, I can't boot my system of battery only. With the adapter, I had no poblem.

  I bought a new battery, but it still had the same problem. Cannot start system battery only.

  The following steps, I was

  • Got the latest Bios Update
  • Used a new battery
  • Do the powerless laptop (detach battery and adapter) and hold the power button for 15-20 seonds. After that return battery and adapter
  • Do seals in my power, parameters of balanced energy vice versa

  Is there anyone who has had the same problem or can advise me?

  Thanks in advance for the help

  Hi Repairlab

  You are not alone. I currently have a C50 Sat with exactly the same problem, with the exception of the upgrade. My problem started before I upgraded to 10. Like you, I can start with the battery and using taking current, but which is rubbish for a laptop.
  I didn't upgrade the bios but the laptop does not recognize when the battery is connected and the bios update tool continues to ask for it (VERY annoying ToshIba if you already read your forums).
  I was trawl through these forums looking for a solution, but there are 0 replies on the vast majority of positions. Not even ToshIba engineers seem to have a presence.

  In any case, did you ever solved the problem, and if so can you please share?

  Thank you.

• Can not boot from the disk of my Satellite C

  1st I have a problem

  Windows Boot Manager
  Windows has encountered a problem communicating with a device connected to your computer.

  File:------Boot\BCD
  Status: 0xc00000e9
  Info: An unexpected I / 0 error

  To resolve this problem, I tried to install the Windows 8-64 bit (definitions of factory programs) - with the correct Toshiba drives, but after installation, that it took place...

  "reboot and select proper boot device or Insert Boot Media in selected boot device and press a key."

  I changed the boot disk priority, but it is still this bug.

  What model of laptop do you have exactly?

  Have you changed anything in the BIOS?

  The error message mentioned (reboot and select proper boot device) appear if the laptop can not find a boot device.
  Go into the BIOS and check if the HARD drive is set as first boot device.

  In addition, you should check if the HARD drive appears on the first page of the BIOS with all the details of the unit (size of the HARD drive, name).
  I guess this question could appear due to a malfunction of the HARD drive.

• Can not boot from CD/DVD on the Qosmio G25-av513

  Hi everyone, I can't get into my windows anymore and when I load the system, I get this error. It shows that I have an error ATA #0
  Intel Boot Agent GE v1.2.31
  Copyright (c) 1997-205. Intel Corporation

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.
  Insert the diskette in the system in the driver.
  Press a key when read...

  I don't have the recovery CD anymore but I am trying to boot from the CD with a CD of Windows XP and I changed the priority to boot from CD first in the BIOS and it always displays this message... Help, please!

  Hello

  Enter the BIOS settings and set its default value. Then try to boot up your laptop and check what happens. Also try to boot from CD/DVD installations. If the problem continues, I'm afraid there is a hardware problem devices such as HDD and ODD are not visible to the BIOS settings.

  I assume it can be due to faulty hardware or faulty controller on the motherboard.

• Vista 64 does not start after the bios screen. Can not boot from the recovery cd or help

  Last night a MS pushed a windows update and my pc restarted automatically.  But it does not actually restart.

  The PC goes through the bios tests, passes and then crashes and does not start in Vista.

  I can't start at all, including safe mode.

  I can't the system recovery option in HP bios to load.  Can I only use my Vista64 system recovery bootable cd or actually start.

  First of all, I thought it was a HARD drive problem, but tests of the bios disk hard that all spend, even the 2 hours 'SMART' test that he was running.

  Help

  Hello

  What happens when you try to boot from the recovery CD? You receive messages or error codes?

  You can check if the boot in the BIOS settings priority is configured to boot to CD\DVD.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  For more information, you can consult the following article:

  BIOS: Frequently asked questions

  If you still experience the problem, you may need to contact HP for assistance.

  HP support

  Hope this information is useful.