Dell Dock does not automatically run at startup

Similar Questions

• My dell dock does not work

  My dell dock just stopped working and every time I try and send an error report it says that it was a mistake to send an error report

  Go to control panel (Classic view) open programs and features, find Dell Dock, click once to highlight it, then click on repair in the menu.

• What is a Dell Dock? Laptop girlfriends keep saying problem Dell Dock does not work?

  someone please help?

  Try to install the latest version here: http://www.delldock.com/

• MY dell inspiration does not start, it will only in Safe Mode

  MY dell inspiration does not start in normal mode, in safe mode. I have windows vista. any help please. Thanks in advance

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording.

  Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!

  Hello

  Try resetting the default associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  If necessary:

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  ====================================

  Also follow these steps:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------

  Then, if necessary:

  Have you recently installed another player?

  Reset your associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  ---------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html

  I hope this helps.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Creative cloud does not automatically start more

  My creative cloud application does not automatically start more. It worked fine for a year and a half.
  But although the box in preferences to start automatically is checked that it does not automatically start more.
  It does not appear in the system tray I must maualy double click the CC (which i put my office op) to start.

  I also had a solution ad put a CC shortcut in the windows startup plan but he strangely disappears each time.

  After I dubble click on the strats of application up normally and everything works fine, so no problems with programs or the application of cc
  It was simply not possible box Autostart to highest upward. I use windows 8.1

  Unfortunately this did not help either. What I did then, I unchecked the box run at startup and put a shortcut in the Windows startup folder. Since then, (3 days ago), he continues to work. Hope it stays like that.

• Why my iMac does not automatically connect to my Airport time capsule.

  Why is my iMac not automatically connected to my wireless after waking up, since I upgraded to OS Sierra?

  Hi kamoore65536,

  Thanks for the upgrade to Mac OS Sierra! I understand that your Mac does not automatically connect to your airport after waking up from his sleep. There may be several reasons why this may happen to you. You can try to run Wireless Diagnostics to see if macOS Sierra can automatically fix the problem. If the problem cannot be solved with Wireless Diagnostics, make sure your wireless network is at the top of the list of your favorite network settings. You can also try to clear your list of preferred networks, and then re add your Time Capsule.

  Search for Wi - Fi using your Mac problems

  macOS Sierra: choose the preferred Wi - Fi networks

  This should have your Mac connecting the airport automatically as it did before. Please use the Apple Support communities to post your question.

  Have a great day.

• After upgrade to El Capitan Time Machine does not automatically

  Recently, I upgraded my Macbook Pro and iMac 24 to El Capitan.  Time Machine does not automatically work on the iMac.   I now use the backup to get a backup to run.  MacBook Pro is very well.

  Thinking that this might be the associated time Capsule, I removed the disc from the Capsule and ran Spinrite on it.  Car is very good.  Then I deleted all the files on the Time Capsule and created new Time machine backups on two computers.  No problem, except the iMac not run automatically Time machine.

  And yes the selection for Time Machine is configured to run automatically.

  A bug in OS X 10.11.1 prevents automatic backups that happens when a desktop Mac (iMac, Mac mini or Mac Pro) is connected to a UPS (UPS) with the USB feature.

  Please, back up all data before proceeding.

  First, check the App Store for a later update to OS X. If it is available when you read this review, install it and see if the problem is resolved. I speak not beta versions.

  Otherwise, you can work around the bug as follows.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please triple - click anywhere in the line below on this page to select:

  sudo defaults write /Library/Preferences/com.apple.TimeMachine RequiresACPower 0

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and start over.

  Wait for a new line ending with a dollar sign ($) below what you entered. You can then quit Terminal.

  Restart the computer and test.

  (Credit for this solution for chrfr of logicielmac.com).

• LL780 - Media does not automatically starting from tray 2

  I have a L7780 using Vista, XP and MAC OS. When Tray 1 is empty, the printer does not automatically draw/pull out tray 2. I get a condition "on paper." I have reset the printer to set up factory and have re-installed the latest drivers from the computer. This feature is published on page 40 of the operating manual. According to HP, this feature does not exist, however, I find that hard to believe since the manual stipulates that to this and I think at one time my printer did move to tray 2 when Tray 1 is empty. I use the LL780 in a network environment with multiple computers. The driver and the latest firmware is installed. I find the following link that deals with a "condition of paper output. I tried all the suggestions and it still does not work. I use plain white paper for all trays.

  http://support.HP.com/us-en/document/c00786157

  My first quesiton is, if somebody has got the LL7780 to automatically select tray 2 when Tray 1 is empty?

  Second, if so, it only worked when Tray 1 is empty at first or did the printer run out all the paper on tray 1 and then automatically move to tray 2.

  Thank you!

  HP released an update of firmware for this particular issue.

  Click here

• Inspiron 5749: BIOS update fails with the error 'Dell id does not match ".

  Hello

  I'm trying to update the BIOS of the Laptop Inspiron 5749. I downloaded the update file 3443A 07. EXE from Dell support website, where the update is supposed to be compatible with my system:

  -Dell Inspiron 3443/3543/5749 system BIOS;

  -Version A07.

  -Pull out the date 18 November 2015.

  I tried to install the update by using the utility to update the BIOS available in the start menu (after pressing F12). The update failed with the error message "Dell id does not match" or similar.

  Running the update of the session Windows don't seem to have any effect either.

  It seems that the update is only compatible with Inspiron 3443.

  Where can I get the update of the correct BIOS for my laptop? Any help is appreciated.

  The problem has been resolved by a motherboard replacement. Thank you.

• My Dell client does not install on XPS 8300

  Having a lot of problems with the computer down and freezing. Want to run diagnostics, but the My Dell client does not install. He gets in what concerns the 'system requirements check', and then disappears. Tried running in administrator mode. Troubleshooting of Windows compatibility shows that the program is not compatible. Running Windows 7. Any suggestions? Thank you.

  Hi Ijltisch,

  Why not just start on the F12 diagnostics partition and run Dell diagnostics from there?

• Database service starts does not automatically

  I've set up a new service of database on a cluster of 3 nodes running 11.1.0.6 and I can start service manually without any problem, but if I bounce the database, the database service does not automatically start even if the database is running - what is the procedure to make sure that the service starts automatically with the database?
  
  Thank you

  short answer - service_name parameter. Longer answer as well as a very useful document is at http://www.ardentperf.com/pub/services-schneider07.pdf

  illustration

  SYS @ DB10G >SHOW PARAMETER SERVICE_NAMES
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  service_names                        string      db10g
  SYS @ DB10G >HOST LSNRCTL SERVICES
  
  LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 10-SEP-2008 13:41:18
  
  Copyright (c) 1991, 2007, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
  Services Summary...
  Service "db10g" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  Service "db10gXDB" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "D000" established:0 refused:0 current:0 max:1002 state:ready
           DISPATCHER 
           (ADDRESS=(PROTOCOL=tcp)(HOST=XXXX)(PORT=4370))
  Service "db10g_XPT" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  The command completed successfully
  
  SYS @ DB10G >ALTER SYSTEM SET SERVICE_NAMES=DB10G,MY_SERVICE
    2  ;
  
  System altered.
  
  SYS @ DB10G >ALTER SYSTEM REGISTER
    2  ;
  
  System altered.
  
  SYS @ DB10G >HOST LSNRCTL SERVICES
  
  LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 10-SEP-2008 13:41:48
  
  Copyright (c) 1991, 2007, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
  Services Summary...
  Service "MY_SERVICE" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  Service "db10g" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  Service "db10gXDB" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "D000" established:0 refused:0 current:0 max:1002 state:ready
           DISPATCHER 
           (ADDRESS=(PROTOCOL=tcp)(HOST=XXXX)(PORT=4370))
  Service "db10g_XPT" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  The command completed successfully
  
  SYS @ DB10G >
  

  Niall Litchfield
  http://www.orawin.info/

  Published by: Niall Litchfield Sep 10, 2008 12:42 TO REMOVE the server name.

• How can I manually add a site to my new tab since suggestions does not automatically include it?

  How can I manually add a site to my new tab since suggestions does not automatically include it?

  Hi MichaelNicholas, you can add a site - pin in the new page by dragging out of your bookmarks or history...

• Satellite L500-208 does not automatically go to power saving mode

  Dear guys,

  I have a Satellite L500-208 (Serial: PSLS9E) with pre installed Windows 7 64-bit.
  For some time, the laptop does not automatically energy saving mode (as configured in the Power Options).

  Automatic change "Energy saving" worked some time ago and all of a sudden, it stopped.
  However, I do not remember what changed and probably caused the problem.

  Everything works fine and a manual of hitting on "Energy Save Button" also works very well...

  Before you guys suggest an update of the BIOS, the BIOS is version 1.60.
  Current version is 1.90 (or same 2.00?).
  Well, I missed an update and from the Toshiba Web space seems to be very rare, they offer only the latest version of the BIOS.

  Can someone points me to older versions of BIOS, or any that may give a clue to the strange behavior power?

  Kind regards
  Frank

  Hello

  Maybe there's something wrong with the Eco utility.
  I recommend reinstall this tool.
  On the European driver Toshiba page, you will find this tool.
  After the new installation, please check the settings provided by the Eco utility.
  Eventually, you will need to activate the energy saving mode automatic

  Good luck

• I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  If you have any documents open in Keynote 5 then you will not be able to drag it to your Dock. IF a right-(control) - click the Keynote icon 5 shows Quit in the drop - down and then select Exit. Now you should be able to slide your dock.

  It is often necessary to drag it from the dock, drag the icon quite some distance from the dock (to what the REMOVAL appears on the icon).

  You can also right-(control) - click the icon select Options, and then, in select Options remove the dock.