Dell in an ASUS sound Surround System

Similar Questions

• 5.1 surround Sound speaker system does not work in Windows 7 Professional 64-bit edition

  My problem is about the same as other users who cannot get their surround sound speaker system to work properly in Windows 7.

  I have a subwoofer and 5 speakers (2 front, 2 rear, 1 for the centre).  Connection to the RealTek HD Audio embedded is simple, orange for the subwoofer, green for the front and black for the rear.

  Test the sound in Control Panel-> windows sound produces a sound on all channels and RealTek HD Audio Manager at the same time, which is the desired configuration.

  However, different applications use different channels.  IE and Firefox use the front channels, VLC/MediaPlayer uses the back.  3D games (that is to say WoW) through all channels.  In each case the subwoofer does not work.

  I tried to download the latest drivers on the motherboard (Gigabyte) manufacturers site.  I even tried the supplied RealTek drivers (even if on the Web from RealTek site which is NOT recommended).  I tried to connect the connectors of the subwoofer to the different takes (reversed black and green).

  I have experimented with the settings in RealTek HD Audio Manager and control panel-> windows Sound.  Nothing works.

  These exact same subwoofer and speakers worked perfectly well on Windows XP.

  I have 2 questions:

  one) has anyone resolved their 5.1 & Windows 7 problem something that I have not yet tried?

  (b) when will Microsoft take this issue seriously?  All Microsoft provided answers just repeat what everyone

  has already tried.

  First disconnect the cable 3 (orange, green and black) then click on Control Panel configuration-hardware and sound - Real tek HD audio manager - central tick, subwoofer and rear pair, front left and right and filling of speaker

  Then click on advance device settings.

  Select "perform front and reading of output devices back two different audio streams simultaneously" and give ok

  Plug all three pins one by one and select the appropriate option in the popup windows.

  That's all.

  You give enough information for me to get this working.   My system runs Win 7 X 64 Home Premium.   When I select 5.1 sound capacity side my 550 x Logitech speakers are not recognized.  If I select 7.1, which is the capacity of my chip Realtek chipset, I can get the two outside are activated as a "rear" speakers and can push the test tones to each of the four surrounding speakers and the combination of Center/bass via the Realtek driver.

  Regarding the "front and reading of output devices back two different audio streams at the same time" worries... I can't find this option.  There are at least two suppliers of 'control of the interfaces' assets on my system.  One is provided by RealTek, the other by Microsoft.  The access roads to these interfaces is roundabout and confusing, to say the least.

  Some compromises are in order in my humble OPINION.  I have my Pandora one stream play in an acceptable way in my small study.  Many of the source of sounds streamed to me are recorded in stereo or mono, I find myself hitting the 'matrix' on my Logitech X 550 button quite frequently.  Sometimes a more recent piece is delivered which actually looks Ok without the decoder "matrix".

  What I would really like to be able to do is to "reconfigure on the fly" between the built in speakers on my Acer Z3731 system USB bar ' All in One ' and my external Logitech X 550 popular with the ability for the presentation of "5.1 surround sound" through three sons.  When I try your procedure, I don't get separate recognition of each thread, as it is trendy and often end up with its 2.1 being eliminated in my 5.1 speakers, because somehow Microsoft has re-recognized the built-in USB port based his bar instead of the three rear wires plugged into the outlets provided by the manufacturer of the system.

  If there was ever separate 'Speakers' and 'Realtek' icons in the UI on my system, speakers are long gone and I can't get back them.  All I see is the Realtek driver.  I would like to see the two icons 'Speakers' different, I could mark "integrated 2.1" and "5.1 external '", in addition to the driver Realtek.»  How can I get these to reappear?

  Can anyone suggest a way to have two different sets of "speakers" recognized and identified in the Microsoft UI in addition to the Realtek driver?  If I could get because of this, I think that the driver would let me 'set as default' one or the other speaker set, and I 'software switching' capable of letting me choose the external speakers or integrated sound bar offers the sound.

• After update tvOS 9.1 on my Apple TV, I lost my sound surround

  After update tvOS 9.1 on my Apple TV, I lost my sound surround?

  Have you tried "Audio" Mode and the "Surround Sound" settings in the settings > audio and video? It may be interesting to try several combinations of these parameters, even though in general this is the 'Surround Sound' setting that causes more problems for users.

  If you use a sound/receiver system, make sure that you have correctly mapped the input port on your output sound system, if you do not know how to do this, refer to the manual that came with your audio system.

• I have a Dell computer with a Vista operating system. My dell dock will charge is no longer. Help?

  I have a Dell computer with a Vista operating system. My dell dock will charge is no longer. Help?

  I have a Dell computer with a Vista operating system. My dell dock will charge is no longer. Help?

  All download Dell Dock and see if that fixes the problems.

  http://DellDock.com/

• Downgrade from Vista to XP Pro Dell Inspiron 6400: no sound, error Code 10

  Downgraded from Vista to XP Pro (V. 2002) on my Dell Inspiron 6400 laptop.  Have installed Service Pack 3.

  Audio will not play (I get beeps of warning system but that's all, there isn't a problem with the hardware).

  In Device Manager, there is a yellow exclamation by the "IDT High Definition Audio Codec" under sound, video and game controllers.

  Dxdiag shows NO device installed.

  NO device does appear as installed anywhere.

  I tried the updated drivers, did NOT work.  Get the error code 10.

  Automated fix - it doesn't include troubleshooting for audio.

  Does anyone have a solution?

  DM1313,

  This system comes with 3 different sound cards to choose from. You can view download driver sound options by clicking below.

  Audio drivers Inspiron 6400

  Thank you

  Dell-Jesse

• Dell studio xps 1645 sound driver IDT works only when it is installed.

  I have the dell studio xps 1645 with windows 7 home premium 64-bit installed on. I have a problem since I format the laptop and reinstalled windows 7 and driver.

  The problem is that with the IDT sound card driver. When I start up the laptop, I couldn't find any noise until then I install the IDT audio driver which is from the website of dell (dell.com.au) under the drivers of dell studio xps 1645 by download. Sounds appears when I installed this driver, but it is not as it should. I mean whenever I do reboot or turn off and then on the laptop, the sound will not come up to what I do reinstall the driver again. The thing is that I have to reinstall the driver whenever I want to use the laptop. can you help me out of this problem? is there any solution for this? I did some research until I get the way to recover my sound, but yes I'm stuck with this relocation pilot to use sound. I did troubleshooting of windows and he said nothing wrong with it. I'll also technician support close to home and they couldn't find anything wrong. I therefore ask microsoft in the hope that they know the way

  . Thank you.

  Hi Felix,.

  Thanks for posting your question on the Forums of community of Microsoft.

  I understand that the sound of your system plays only after you update the audio drivers. The question could arise due to the installation of the corrupt or incompatible driver package.

  Before troubleshooting, I would like to inform you that the drivers for the model of your system on the Dell Web site are displayed for Windows Vista, by default. So, I recommend you to change the operating system to Windows 7 while choosing for pilots.

  In addition, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try running the fixit for audio playback of Windows problems and check if it helps.

  Diagnose and solve the problems of Windows audio playback automatically

  If the problem persists, try the following method.

  Method 2:

  If you have installed Windows 7 drivers from the website and have not properly been able to play the audio, then I suggest you to install the Windows Vista drivers from Dell site in compatibility mode and check for the issue.

  1. Download the Windows Vista driver on the Dell website.
  2. Right-click on the downloaded driver file.
  3. ClickProperties , and then select the compatibility tab.
  4. Check enable the option run this program in compatibility mode for: , then select Windows Vista from the drop down.
  5. Click OK and install the driver.

  For more information, please visit:

  Make older programs in this version of Windows

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Dell U2713HM on Asus HD7970-DC2T

  Starting today, I am the proud owner of a Dell U2713HM monitor, which I connected to my Asus HD7970-DC2T video card, using the Dual link DVI cable provided with my monitor.

  Unfortunately, I can't set my resolution of 2560 x 1440.

  Only I get to the resolution is 1920 x 1080

  I tried the two DVI ports on my video card (with a reboot after changes), installed the driver from Dell for the monitor, researched internet if it is possible to set the maximum using DVI resolution (must be determined according to the time the Dell website and specifications of my video card).

  So, any help would be much appreciated.

  Video card: http://www.asus.com/Graphics_Cards/HD7970DC2T3GD5/

  In the end, I managed to solve my problem.

  After a lot of searching on the internet, I found that the mentioned video card has a little switch that decides one of the DVI ports is to double bond or not.

  So I turned off my pc, open the computercase, flipped the switch, rebooted the system and there it was: 2560 x 1440

  The mentioned switch position can be seen in the image below:

  

  I hope that this will help people who runs into the same problem.

• A sound surround Satellite X 200 support like 5.1

  The my x 200 20 t have sound like 5.1 surround sound?

  As far as I know the laptop supports 5 speakers:
  2 x hand + 2 x tweeter and 1 x harman kardon subwoofer

  Have you checked the user manual?
  Say the user manual?

• Equium L10-142: no sound after system restore

  Hi there I got a Toshiba Equium laptop since May / June ' 05 (the model on the bottom is EL10-142, so I guess that its a L10?) Never had a problem with it until it completely crashed at Christmas. A friend who is a computer enthusiast has got completely restored back to factory settings by using his Toshiba A60 Back Up Disk (the software provided with it is not found) and downloading the drivers from the Web from Toshiba site.

  Now, he works very well except one thing. There is no sound.

  I tried all suggestions from the Microsoft Assistant help regarding no sound, ensuring that the FN Esc key had not accidentally pressed, the Volume Module in the control panel was all upturned and not cut, ANY - but to no avail.

  There are a few drivers who must always be installed (did not really a clue where to get them going on the site of Toshiba does not give me and his work and do everything I need OK so Im not bothered) so I though maybe that was the problem, but oddly when I went into the thing of drivers Diagnostics He said that the Realtek AC97 driver has been installed and working properly.

  Help!

  I don't see what there is to do to fix this and it was definatley caused by thte system restore, as his was not a problem before the great crash.

  Any advice you have would be greatly appreciated.

  Thank you

  E.

  Wait a minute; you said that your friend used the recovery CD Toshiba for the A60 Equium L10on!
  I m not surprised that noise does not appear. You cannot use a form of another laptop recovery CD!

  If you haven t the recovery CD right you need to order or you will install the operating system from the Microsoft Windows CD and then you download the drivers from the Toshiba driver page:
  http://EU.computers.Toshiba-Europe.com/->-> support-> support homepage & Downloads Download drivers

• No sound. System beep only

  Yesterday, I lost my sound and seem to get only beeps. Have not changed anything and checked all connections and the control panel. How to restore the sound, please? Thank you.

  Did you go through each tab and try all listed, including reinstall them the drivers from the manufacturer?
  If you do not, do. If you don't know who is the manufacturer of the audio device, check that support Web site computer manufacturers. Optionally, you can click Start, click Run, type dxdiag in the Run dialog box and press ENTER. Click on the sound tab, and you should see the name.

  You can also run the system restore, since the problem started recently.
  http://support.Microsoft.com/kb/306084

  With regard to exchange slots, you can search for videos that show what to do, but if you don't feel able to do it, I would not try. In addition, there is a good chance of the audio is not a stand alone card and is integrated, in which case you would not be able to try it.

• I have a Dell Inspiron and its ubuntu operating system is there a way to change it to windows xp

  I have a dell inspiron operated by ubuntu is possible to change it to windows xp

  Hello

  I'm assuming that Ubuntu is the only OS installed on the computer, and you have a XP install disc.

  The hard disk must be erased all traces of the file system,

  Download and burn to cd Darik Boot and Nuke. Start and wipe the drive hard when you are finished it will appear for XP like a new hard drive.

  http://download.CNET.com/Darik-s-boot-and-Nuke-for-CD-and-DVD/3000-2094_4-10151762.html

  Slan go foill, Paul

• Dell inspiron E1505 with Windows Vista system restore to factory setting led by mistake. The operating system version is incompatible with Startup Repair tool

  I tried to restore my Dell Inspiron E1505 laptop to the factory setting.  I pressed F8 then selected repair and then Dell Factory Image Restore.  Used to format hard drive.  He formatted the hard drive and then he restored the system.  Suddenly, a small window pops up without any details, but saying "error".  I restarted the laptop, it entered into Startup Repair mode.  But even once showed error "operating system version is incompatible with startup repair".  I don't have my windows CD/DVD.  Although the windows sticker is still on the laptop.  Please advise me how to install the system on the laptop so I can use the same.  Please note that I am in Gurgaon (India).

  Thank you

  Hello

  Because the computer is located in a no start situation and you don't have the installation disc, it is best to contact the manufacturer for assistance.

• No sound after system reboot

  won't help.

  my sound on my computer used to work. but currently, the sound was very quiet even when it is full volume. now no sound speakers. I tried to use headphones in the computer, but it was the same thing. Ive tried uninstalling and renstalling the hard drive but nothing has changed. It happened after we did a complete remission to zero of the system. any ideas on how to fix it?

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for the latest Audio from Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Is Dell's FluidFS a cluster file system?

  I ask because I have several servers that must write to the same iSCSI target.  If I understand correctly what could mean the blocking issues and corruption.  This is fixed by an updated on the cluster file system.  I see a lot of mention of the word 'cluster' with the FS7600, but I don't know if Dell's FluidFS is a system of files updated on the cluster or if the FS7600 is somehow a cluster os in general.

  Can the FS7600 help me in my concerns about corruption, or do I still need to have an another clustered file system.

  Yes.  It is designed from day one to be a cluster.  You don't have to worry a NAS accidental head on the other.

  When you use the FS7600 that isn't an iSCSI target, it's a network share.  Either through NFS or CIFS.  What are the multiple systems can connect to.

  If you create a volume iSCSI on the table itself, then your hosts the need to run a cluster file system up-to-date, it's true.

• Management tools not available to download Dell and Documentation DVD image 002 systems

  Hello

  I am trying to download the tools of systems management Dell and DVD of Documentation that is provided in the form of two files OM_6.2.0_SMTD_A00.iso.001 and OM_6.2.0_SMTD_A00.iso.002.

  I downloaded file 001 ok, but it doesn't seem to be a file available for download for the file 002.

  I tried to use the single file that is I renamed to iso and it burned on a DVD. The server starts from he and I can start the operating system installation process, but it won't get past the stage of preparation of partition; It fails to read DVD media (I'm guessing it's because of the second missing data file).

  My server is PE 2800 and selected OS is Windows Server 2008 R2.

  Where can I get the file 002?

  Kind regards.

  Craig

  Hello

  Download the second piece here:

  http://FTP.Dell.com/secure/SYSMAN/

  then use HJSplit to join them and burn the iso to a DVD disc.

  has worked for me :D