counter back to zero

Hello

How I can do this, if the struct case is true, the meter to zero, (== 0) and account again... I have attached the picture of my vi...

Use a shift register in your outer loop. You can also double check your code. You can do simple things in a complicated way. X + y doesn't make sense to me.

Tags: NI Software

Similar Questions

My windows Defender is set to off, when I try to change as a result, he stops and tells me to reset, I try and it always goes back to zero.

Original title: security settings

My windows Defender is set to off, when I try to change as a result, he stops and tells me to reset, I try and it always goes back to zero.

How can I solve this problem

Hello

1. what operating system is installed on the computer?
2. were there any changes (hardware or software) to the computer before the show?
3. What is the full error you get, when you try to activate windows Defender?
4. what anti-virus is installed on the computer?

Method 1: Check if the Windows Defender service is enabled.
a: Type Services.msc in the start search box and click on enter.
b : now, look for a service called Windows Defender, double-click to open it.
c: Now Start the service and make sure that it is set to automatic.

Method 2: Temporarily disable the antivirus and check if the problem occurs.
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

Note: Activate the anti-virus program after you perform this step, because it would protect your computer from threats.

Note: If there is an antivirus installed, then it might be turn off Windows Defender, so temporarily disable the antivirus and check if the problem occurs.

Hope this information helps.

Why the solitary collection does not reset back to zero every day, when I never play at vegas cumulative game and want to continue the same game.

the old game on vista used to allow to save a game and return to saved games, but windows 8 dates back to zero every day. It's more boring

Hello

Please refer to the article to help out the apps and check if it helps:

What to do if you have problems with a soft

http://Windows.Microsoft.com/en-in/Windows-8/what-troubleshoot-problems-app

If you have third-party registry cleaners or tools of performance optimizer, you can even uninstall and check if the problem persists.

Let us know if it helps.

counter stuck at zero

Hello

I use LabVIEW 2014 on 64-bit Windows to acquire data of moving a digital coder as follows: linear encoder Renishaw--> NOR 9411 digital in--> cDAQ - 9174--> Windows machine.

I have a VI that records moving to 5000 Hz. He was works well for weeks, but suddenly, change value (i.e. the County) remains stuck to zero any movement there.

Trip data are also used in a feedback SoftMotion loop. Which works very well. I use same SoftMotion commands to create a history of travel, that looks right (this story of displacement is limited low frequency of activation by SoftMotion nature so I created this second way to measure travel to high frequency). Point being, I am convinced that the linear encoder works fine.

I am extremely confused because I have not changed anything of substance I can think. I move the cDAQ9174 to a different os of USB cable I started with the assumption that I had screwed up connectivity somewhere in hardware. The cDAQ-9174 and NEITHER 9411 times pass Self Test NI MAX. I checked the relevant cable continuity by pin and it is fine. Then I started to try to get more information on the value of the counter. I have a number of versions of this VI and they all report that the meter is flatline to zero any movement there is in the system. I ran the VI in run mode of looking for clues and I noticed something that seems a little weird, at least for me. The meter is identified as cDAQ1 / _ctr *. Does anyone know what this means?

Attached is the VI screenshots with and without highlighting on execution in case someone sees something in there that I'm missing.

Thank you

John

Thanks for your help. I can't exactly say I solved this problem, but the problem disappeared. Any changes I made to the wiring and then repeated to them, I reversed and all of a sudden it worked again so he must have had a problem connecting somewhere along the line. Thanks for explaining the * thing, good to know that it was a Kipper.

John

storage settings back to zero

My flash drive for storage keep returning to zero

Yes, that's intentional. We respect the feature remove Cookies from your browser and also clear Flash local stored objects. Because we store information about sites on a per-domain basis, preference files are effectively fleeing know where you've been, so they have to go.

In my opinion, all of these things is not relevant at this stage. Tracking technology is happening aside the client and the server and controlling the LSO for privacy is not buy you much and at a time when 1 TB HDDs are stupid cheap disk storage controls and their increases are (10K, 100K, unlimited!).

All these things were designed before the private browsing session / Incognito Modes were available in the major browsers. Now you can simply activate those, allow sites Web store anything they want without degrading your user experience, and when you leave the private browsing mode, all this information is blown away (it has been stored in a temporary location when in private browsing mode). He still isn't a perfect privacy either solution, but it mitigates all vectors (of which there are many), as well as the Flash stored local objects of monitoring the HTML5.

There is a context here:

Stealth Web tracking tools pose growing risks of privacy to users | Computerworld

Anyway, these dialog boxes are not good. We are well aware of the problem, but there are some intractable problems unique to a process that is hosted within a browser which makes it difficult to distinguish the clicks are 'real' or if dialog boxes or are hidden (see: Clickjacking - Wikipedia, the free encyclopedia). They are tiny, because they date back to a time when VGA was a relevant display size. This is an issue that is definitely on our radar, and more important because they are very small displays with more than 4K resolution.

The ideal solution is to move many of these dialog boxes in the browser chrome (and you will see that on the dialogs such as access camera/microphone in Chrome), when the browser has an authoritarian vision of user input and is always on it later from the screen, but that requires buy-in effort and the genius of each single browser provider It's so slow to travel lane. The rest of them we must reconsider and rethink and these are ongoing discussions within the team.

In the short term, the best method to deal with these is to avoid, like private browsing mode really doesn't do the majority of the related concerns moot, and others (such as the LSO disk consumption) are pretty trivial.

BUG Apex4.0 AnyChart: apex_util.flash - back to zero, and not null
[Line graphic screenshot | http://www.anaruk.com/linechart.jpg]

The image of the chart I linked above is a year to the year sales charts. The first series returns the 2009 turnover. The second returns year to date in 2010. The problem is that even if the query returns no data from August to December 2010 - because they have not yet - arrived the XML returned by the proc apex_util.flash returns this month with a zero value causing the graph plot these data.

game of 2009 query results:
MONTH IN LINK SALES
-Jan 250
-Feb 230
-Mar 360
-Avr 130
-120 may
-Jun 180
-Jul 130
-Aug 280
-270 Ms
-Oct 250
-Nov 360
-Dec 410

2010 query result set:
MONTH IN LINK SALES
-Jan 130
-Feb 970
-Mar 170
-Avr 140
-May 110
-230 Jun
-Jul 440

XML for 2010 is back:
< name of series = "CDA 2010" type = "line" color = "0x1D8BD1" > "".
< point name = "Jan" y = "130" >
< / point >
< point name = "February" y = "970" >
< / point >
< point name = "Mar" y = "170" >
< / point >
< point name = "Apr" y = "140" >
< / point >
< point name = 'May' y = '110' >
< / point >
< point name = 'June' y = '230' >
< / point >
< point name = "Jul" y = "440" >
< / point >
< point name = "August" y = "0" >
< / point >
< point name = "Sep" y = "0" >
< / point >
< point name = "October" y = "0" >
< / point >
< point name = "Nov" y = "0" >
< / point >
< point name = "Dec" y = "0" >
< / point >
< / series >

IF I edit and load the following, AnyChart correctly do not draw the last four months:
< name of series = "CDA 2010" type = "line" color = "0x1D8BD1" > "".
< point name = "Jan" y = "130" >
< / point >
< point name = "February" y = "970" >
< / point >
< point name = "Mar" y = "170" >
< / point >
< point name = "Apr" y = "140" >
< / point >
< point name = 'May' y = '110' >
< / point >
< point name = 'June' y = '230' >
< / point >
< point name = "Jul" y = "440" >
< / point >
< point name = "August" y = "" >
< / point >
< point name = "Sep" = "" >
< / point >
< point name = "October" y = "" >
< / point >
< point name = "Nov" y = "" >
< / point >
< point name = "Dec" y = "" >
< / point >
< / series >

--------------------------------

Thanks for any comments.

Walter

Published by: WannaRock on July 23, 2010 14:17
--------------------------------------------------------------------------
-being more descriptive
-correction of the errors of three strikes
Hi Walter,

Thanks for that bring to our attention. The behavior you reported is the current default behavior to handle null values on the chart, where they are represented as a zero in the data series. I appreciate this manipulation is not what you expect, especially in your scenario, when you do not want to represent some points on the graph (August - December 2010), so I'll review this behavior and includes a fix for this in our next version 4.0.1 patch. I connected the bug 9945462 to follow up on this matter.

Kind regards
Hilary

LaserJet mfp 6040: noted 6040 laserjet back to zero after the NVRAM reset counters?

Hello

We had to do a reset of the NVRAM and then put the latest firmware to correct a problem

the usuage meter reading resumed at zero

It would be very useful if anyone knows if I can enter the readings that we have on?

As long as you have the information, you can enter using the service menu. A diagram of the menu is attached. Here is link to find the PIN code that you will need to access the menu.

http://www.printertechs.com/printer-troubleshooting/service-menu-PIN-codes

Windows Vista Home Edition: The permissions of Reseting back to zero/all around, or default system restore reset. ?????????????

Remember - this is a public forum so never post private information such as numbers of mail or telephone!

Ideas: 2 Questions actually & I have Windows Vista Home Edition...:

(1) I begun to change some permissions under the Security tab of the properties, and now they are screwed... How can I reset just all permissions to the default settings? Help, please! Boy, I'm arrested for murder... My laptop about to be thrown through the window of a building-sky.

(2) is there a way to reset or restore my system? I don't like to lose anything it all. I saved what I want or need. I just want to start from scratch...

In fact, I have 1 other question... Whole reason I messed my permissions first is because I've had this laptop second hand and I did EVERYTHING to get rid of the old owners as a user name and I IMPOSSIBLE... It drives me crazy. I am the owner / administrator and there is no other user accounts, but still all my programs and files have this other names of people on them.

* Thank you very much to all those who can help me!
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
You must always wipe a used computer and start over.

How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

There is no Vista free download legal available.

Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

Normally, they do this for a cost of $ small.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

Normally, you have to press F10 or F11 at startup to start the recovery process...

Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

They will tell you how to do this.

Every computer manufacturer has their own way of making recovery disk/s.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.

There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

http://support.Microsoft.com/default.aspx/KB/918884

MS advice on the conduct of clean install.

http://www.theeldergeekvista.com/vista_clean_installation.htm

A tutorial on the use of a clean install

http://www.winsupersite.com/showcase/winvista_install_03.asp

Super Guide Windows Vista Installation

After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

Save all data, because it will be lost during a clean installation.

See you soon.

Mick Murphy - Microsoft partner

Win 7 boots. wallpaper appears, but no icons. back to zero makes no difference.

Start pc win 7. Gets the extent of wall-paper, but no icons appear. given to zero has the same result. any help appreciated.

Hello

Welcome to the Microsoft Community Forums.

According to the description, it seems that you are facing issues with icons on the desktop are lost. I'll be happy to help you with this problem.

(1) did you do changes on the computer before this problem?

I suggest you follow the steps to ensure that the elements of Show Desktop is checked:

(a) right click on the desktop , and select view.

(b) ensure that the Show Desktop items is selected.

I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

Back to zero computer and now I do not have access to my books

This morning when I turned on my computer, Microsoft bypassed my security and attempted to install Windows 10 WITHOUT MY CONSENT. I immediately stopped creating a closed error and I reset my computer.
Now I can access is no longer my books in Digital Editions, (there are only 2). How can I fix it?
Any help would be greatly appreciated.

It is now correct. I had a tech from the Kobo, which helped me to correct the problem by downloading desktop Kobo. I deleted Adobe Digital Editions and will never use this product again. What should have taken a few moments to solve actually took 5 days. Yesterday I spent 3 hours back and forth with all kinds of people who were supposed to be 'in the know '. I am totally disgusted with the technical support offered by this company and never buy one of their products in the future because of my experience.

Although I appreciate your attempt to communicate with me, and I'm sure you do this on your own time; you need upgrade your skills in English.syntax. I don't pretend to be an expert in languages, but it is obvious that English is not your native language. While I applaud your efforts you still need practice. Thank you for taking the time to answer for me.

The View of line object count goes to zero after removing the view criteria.

Hello
I use JDeveloper 11.1.1.4.
I applied viewCriteria to a viewObject. Its working fine.
But after that when I remove this ViewCriteria using removeApplyViewCriteriaName () /removeViewCriteria (), the number of lines of this same viewObject is 'null '.

Kind regards
Alok

Rather than use getRowCount(), which is not good if you get several rows in the back, use getEstimatedRowCount(), which requires the DB how many rows are returned.

Then, you can start your apuplication with - Djbo.debugoutput = console so that you see what request is sent to the db. Or you use this class VO Dump request and it & #8217; s parameter with their values. JDev & amp; ADF Goodies to get only the query and parameters of the journal.

Timo

Back to zero (or "Screw up") the Lightroom preferences file

Hello
in an effort to make the option change in the work of LR, I found the instructions I need to reset the LR preferences file. I followed the following, see below.
However, even with pressing option key on my iMac, as indicated, I can't file and the file. I don't have a library folder under my user name, but only under the hard drive, and I can find the files com.adobe.photoshop, but no files in LR. Can someone help me?
Lightroom help .
Preference and other locations of files in Lightroom 5
Adobe Community Help
Products affected
5 Lightroom
Contact technical support
Give feedback
What is covered
Upward
Important information for all platforms
The files and the locations of files given here are default values. Some of these places can be customized in the Lightroom \Preferences or the catalog settings dialog boxes.
While troubleshooting, where possible, rename the files instead of remove them.
If possible, back up catalogs on another hard drive or a volume of the disk where your catalog is located. For more information about the backup in Lightroom, read back up a catalog with Lightroom and look at the backup catalog on Adobe TV. (The video has been produced for Lightroom 4 but still applies to Lightroom 5.)
Upward
Locations of files on Mac OS X
Note:
The user library file is hidden by default on Mac OS X 10.7 and later versions. For temporary access to the file library user, press Option and select go > library in the Finder.
The Lightroom application file
/ Applications/Adobe Photoshop Lightroom 5. app
Preferences
/Users/[user name]/Library/Preferences/com.adobe.Lightroom5.plist
Catalog
/Users/[username]pictures/Lightroom/Lightroom Catalog.lrcat 5
The preview cache
/Users/[username]pictures/Lightroom/Lightroom Previews.lrdata 5 catalog
Smart Preview cache
/Users/[username]pictures/Lightroom/Lightroom 5 catalog Previews.lrdata Smart
Locking of catalog file
/Users/[username]pictures/Lightroom/Lightroom 5 Catalog.lrcat.lock
Note: The locking file prevents the catalogue to be crushed when using.
Log file catalog
/Users/[user name]5 pictures/Lightroom/Lightroom Catalog .lrcat - journal
Note: Open catalogs use the log file to check the incomplete database records. Do not delete the log file unless you delete its associated catalog, as well.
The Catalog backup
/Users/[user name]/[date and time of backup]Lightroom Catalog.lrcat 5
Models and pre-defined parameters
/Users/[user name]/ Library/Application Support/Adobe/Lightroom /[folder preset or model]/[preset or template filename.lrtemplate]
Serial number
/Users/[user name]/ Library/Application Support/Adobe/Lightroom/Lightroom 5.0 registration

Odd. Try this:

Make sure the Finder window is active.

Without press the Option key, click and hold the tab top Go to the screen, you see the drop-down list.

Without releasing the mouse, press the Option key.

See you on the drop-down list changes?

Back to zero/recalculate value if the element with dynamic action
Hi all

What I have is a part of "total amount". When the other elements on the form are filled, these values are subtracted from the total. My problem is that when a few points to say a filled out, but then set to zero, the figure in the total does not reset. If no new figure added, are more excluded.

For example:
total = 10
Value of 1 changed to 5. Total = 5.
Value of item 2 changed to 1. Total = 4.
Value of 1 changed to 2. Total = 2.

I find it tricky is because the total is derived from an action of current setpoint led other points. Finally, I would like to reset or re - run the calculation for the total, without duplicating the original action of the set value. I tried to use a dynamic action "Refresh" but I don't think that work in this way. Is there another way?
Why not save the original value to an item hidden page (or even in a global variable set before you run the JS calculation for the first time in javascript).
During the reset, set the value of the element with the value of the hidden (or variable).

Back to zero in the Group of
Hello

I have table, say commands, such as

CREATE TABLE ORDERS ("CUST_ID" NUMBER (10), "ORDER_ID")
NUMBER (10), DATE OF THE "ORDER_DATE")

I would like a list of CUST_ID with the number of orders placed in a given time interval, so I have a

SELECT DISTINCT CUST_ID, COUNT (*) AS ORDER_COUNT
Orders
WHERE the ORDER_DATE BETWEEN < date1 > and < date2 >

I have the list as

CUST_ID ORDER_COUNT
----------------------------------
1 27
2 15
2 t2

and so on. Cust_id 3 is not present, because it has not ordered in the meantime.

I would like to have:

CUST_ID ORDER_COUNT
----------------------------------
1 27
2 15
*3 0*
2 t2

How can I do?

Thank you
```
select c.cust_id, count(o.order_id)
from   customers c
,     (select * from orders where order_date between :startdate and :enddate) o
where  c.cust_id = o.cust_id (+)
group by c.cust_id
```

A plant back to zero help with the battery?

Did a factory reset help if after a user updates 9.3.3 they have battery issues?

Only if he had problems with the update download which is unlikely. You would have to do a restore of the system, not only a reset.

Try the procedure described in this article for suggestions, including turn off background App update.

http://www.Apple.com/batteries/maximizing-performance/

counter back to zero

Similar Questions

Preference and other locations of files in Lightroom 5

Products affected

What is covered

Important information for all platforms

Locations of files on Mac OS X

Maybe you are looking for