No sound after system reboot

Similar Questions

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• Whenever my id of disconnection after system reboot

  Whenever my id of disconnection after system reboot

  Hello

  Please ensure that you have the latest version of the installed Creative Cloud application

  http://helpx.Adobe.com/creative-cloud/release-note/CC-release-notes.html

  We also have the solution for him having to log on each product launch

  http://helpx.Adobe.com/creative-cloud/KB/unable-login-creative-cloud-248.html

  You can view the creative cloud sign me or asking to connect you several times

  Let us know if this helps!

• theme reset after system reboot

  I can't seem to get my windows xp theme remaining after a system reboot, or get windows actually restart after selecting "reboot" menu so that maybe that's...

  Anyway, I don't like on the reboot problem. I want to just that my theme to stay put rather that to reset in drilling nothing mode blocks square, Matt gray stuff that are the norm.

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. Looks like the theme is getting the changes after each reboot.

  Follow the given steps and check with the question.

  Restart the Service of theme Services

  1. click on Start, click run, type services.msc and click OK.
  2. double-click on themes

  service.and then click Properties.
  3. on the general tab, click Automatic in the list Startup type .
  4. on the general tab, click Start under Service status, and then click OK.
  5. close Services.
  Restart the computer and check.

  Hope this information helps. Please reply with the status so that we can help you.

• Index of physical memory SNMP oid has changed after system reboot

  I asked for a hot - difficulty for windows 2003 server. Server must be restarted after you apply the hotfix to hot. After the reboot, I noticed this index of oid snmp for physical RAM increased from 17 to 16. is this normal behavior for snmp to change the Index oid?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Equium L10-142: no sound after system restore

  Hi there I got a Toshiba Equium laptop since May / June ' 05 (the model on the bottom is EL10-142, so I guess that its a L10?) Never had a problem with it until it completely crashed at Christmas. A friend who is a computer enthusiast has got completely restored back to factory settings by using his Toshiba A60 Back Up Disk (the software provided with it is not found) and downloading the drivers from the Web from Toshiba site.

  Now, he works very well except one thing. There is no sound.

  I tried all suggestions from the Microsoft Assistant help regarding no sound, ensuring that the FN Esc key had not accidentally pressed, the Volume Module in the control panel was all upturned and not cut, ANY - but to no avail.

  There are a few drivers who must always be installed (did not really a clue where to get them going on the site of Toshiba does not give me and his work and do everything I need OK so Im not bothered) so I though maybe that was the problem, but oddly when I went into the thing of drivers Diagnostics He said that the Realtek AC97 driver has been installed and working properly.

  Help!

  I don't see what there is to do to fix this and it was definatley caused by thte system restore, as his was not a problem before the great crash.

  Any advice you have would be greatly appreciated.

  Thank you

  E.

  Wait a minute; you said that your friend used the recovery CD Toshiba for the A60 Equium L10on!
  I m not surprised that noise does not appear. You cannot use a form of another laptop recovery CD!

  If you haven t the recovery CD right you need to order or you will install the operating system from the Microsoft Windows CD and then you download the drivers from the Toshiba driver page:
  http://EU.computers.Toshiba-Europe.com/->-> support-> support homepage & Downloads Download drivers

• iPhone 4S using iOS 9.2 only sounds after hard reboot every 6 hours

  After the purchase and implementation of iPad Pro my iPhone 4S stopped ringing, or calls incoming record.  Calls went straight to voicemail.  I upgraded to iOS 9.2, tried every suggested idea (disable Bluetooth, switch to airplane Market mode, reset wi - fi) and then wiped clean and used backup to iCloud phone to reset.  By disabling the Bluetooth iPhone rings and calls come by if I reboot every 4-6 hours.  Help please.  Can someone suggest a better solution?  I don't remember to restart the phone every 4 to 6 hours, because then it's really a useless device.  There are no other apparent problems.  Texting works, e-mail, apps appear to be well.

  Hi Aqswr,

  Sorry to hear that you are having problems with your iPhone, receive phone calls. Let's see if we can get that back upwards a job for you if you do not have to restart your iPhone repeatedly.

  I begin by take a look at the article below and compare what you've done with it. I would like to reinstall the SIM card as well as contact your operator to ensure that they have all the problems at their end. Another option you can try is reset of the network affecting your iPhone. You will not lose any personal data but need to join Wi - Fi networks that have already joined you.

  If you can not make or receive calls on your iPhone
  https://support.Apple.com/en-us/HT204027

  If you're still having problems, then you want to contact Apple Support for assistance.

  Take it easy

• Windows running in the backup drive D: after system reboot

  I rebooted my system yesterday and discovered that it had been done in the backup drive D which has only 1 g backup space. I can't do another reboot because there is no space in the drive.

  My question is: A) how to get the operating system to run on the main C drive

  (B) I'll be able to remove the old operating system to drive D

  Dell XPS 1530

  Vista 32 bit

  Any help is greatly appreciated, thank you

  Delete older backups and free up space on the D drive.

  To remove old backup files, under the backup of data files, click View backups.

  You can then select the backups of files that you want to delete, which will free up disk space. Remove an entry in the list will not affect the other backups. If you think that you don't need one version of your files from a certain backup period, you can delete that backup. We recommend that you always keep the most recent backup.

  For more information, take a look here: http://windows.microsoft.com/en-US/windows-vista/Back-up-and-restore-frequently-asked-questions

  The man likes to play chess; Let's get him some rocks

• ColdFusion service starts do not after system reboot

  After you restart the server today, coldfusion employment service could start server.

  I tried to restart it manually through component services, but he did not.

  There is no newspaper in C:\ColdFusion11\cfusion\logs.

  Message in the Windows system log is:

  Log name: System

  Source: Service Control Manager

  Date: 01/09/2015 01:59:12

  Event ID: 7024

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: reports

  Description:

  11 ColdFusion application server ended with the following special service error:

  The system cannot find the specified file.

  The event XML:

  "< event xmlns ="http://schemas.microsoft.com/win/2004/08/events/event">."

  <>System

  < provider name = Guid "Service Control Manager" = "{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName = "Service Control Manager" / > "

  < EventID = "49152" > 7024 qualifiers < / EventID >

  < version > 0 < / Version >

  < niv.2 > < / level >

  < task > 0 < / task >

  < Opcode > 0 < / Opcode >

  < Keywords > 0 x 8080000000000000 < / keywords >

  < TimeCreated SystemTime = "" 2015-09 - 01 T 08: 59:12.335662300Z "/ >"

  < EventRecordID > 37578 < / EventRecordID >

  < correlation / >

  < execution ProcessID = "664" ThreadID = "4220" / >

  System of < channel > < / Channel >

  < computer > description < / computer >

  < security / >

  < / system >

  < EventData >

  < data name = "param1" > Application ColdFusion 11 server < / data >

  < data name = "param2" > % / data >

  100740069006F006E0020005300650072007600650072000000 < binary > 43006F006C00640046007500730069006F006E0020003100310020004100700070006C00690063006 < / binary >

  < / EventData >

  < / event >

  Message in the application log:

  Log name: Application

  Source: 11 ColdFusion application server

  Date: 01/09/2015-02:13:23

  Event ID: 259

  The description of 259 Application ColdFusion 11 source server event ID is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  11 ColdFusion application server

  the message resource is present, but the message is not in the string/message table

  < name provider = "Server applications ColdFusion 11" / >

  < EventID = "49153" > 259 qualifiers < / EventID >

  < Keywords > 0 x 80000000000000 < / keywords >

  < TimeCreated SystemTime = "" 2015-09 - 01 T 09: 13:23.000000000Z "/ >"

  < EventRecordID > 11826 < / EventRecordID >

  Application of < channel > < / Channel >

  < / data >

  ColdFusion 11 < data > application server < / data >

  < / EventData >

  < / event >

  Please suggest the solution that I couldn't find much on the web.

  update the following to correct file java House solved the problem.

• Tablespace TEMP wash after system reboot

  I have problem with tablespace TEMP blocked about 12 g. I does not change, no matter what is happening on the system.
  
  I guess the TEMP tablespace is to store temporary data but, even after I database is arrested and put into service these 12 G are still there.
  
  Any idea?
  
  
  Linux x 86
  Oracle 10.2.0.1

  This isn't a bug, but the expected behavior. Segments in temporary tablespaces are not erased, but ready to be crushed by the new temporary data. Only solution is set as temporary tablespace default and create a new temporary tablespace. Later, you can remove the old TEMP.

  Werner

• Satellite P200 - 1FC: no sound after system update

  Yesterday my laptop did an update of the system for Windows and when I restarted the computer, my speakers did not work, my ATI graphics card was not found and that the reader has stopped working.

  I don't know what happened, but I don't think that the update installed correctly.
  I had a similar problem on my old laptop with XP and I due simpy reinstalling the update.

  For some reason I can't do this on my current.

  I use a SATELLITE P200 - 1FC.

  Is now SP1 for Vista installed?

  I ask this question because I got message on Vista updates and SP1 was who listed there. I'm afraid, it can have a negative influence on the good OS and I'm quite skeptical about it. For now, Toshiba does not support Vista with SP1.

• Some ESX4 configurations are lost after the reboot of the system

  Hi people,

  I use ESX4 server for months.

  Lately, after creating a few Pools of resources (RP) and the addition of virtual machines in the pool, I noticed that after rebooting my system, I lost all the Resource Pools, I created.

  This problem of loss of configuration is not only limited to the RPs, I also lost some of the configurations of the network/portgroup after system reboot.

  This problem is is produced as well when I entered "Maintenance mode" and then then rebooted the system;  and also when I typed the command "reboot" in the bash shell (I typed 'reboot' command 'sync' several times before typing.)

  This problem becomes a kind of annoyance since I have to re-create the lost configuration each time that I reboot.

  Is it possible to manually force the ESX4 to save the configuration for that I do not keep losing part of my configurations?

  Could someone please help?

  Thanks in advance.

  Danny

  Really glad its sorted for you, as I said, I saw the question before at a customer's site and you will never know that the root is full, except if you look in the service console. It would be good to have this visible through the vi client, but in the meantime it just added monthly controls!

  Thank you

  Dan

• After 13 updated both the system rebooted and now as he begins to install XP it autorestarts. It will not recover to the last known good config and delivers a message of corrupted config file.

  Any ideas?

  Thank you

  Frank

  You will share exactly what the message of the corrupt config file says?  My crystal ball takes off the second Wednesday of each month.
  If your system reboots continuously, the next time the system reboots, start tapping the F8 key until you see the menu Boot Options Advanced XP.  On the Advanced Boot Options menu, select:

  Disable the automatic restart in the event of system failure

  This will display the error message that you don't see when the system restarts.  This is what Windows is supposed to do when there a failure - it is supposed to automatically restart.  The error you see on the screen has your clues...

  If you do not see the menu Options start Advancded or you do not have to turn it off automatic restart on option system in the list of choices, you need to try again until you do.  Start typing the F8 key earlier and more frequently as your system begins to come alive.  If you miss the window of opportunity F8, you must try again.
  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)
  ?
  Most of the time (in recent memory) when there is a problem after installing Microsoft updates, the problem is because the computer was somehow afflicted before/when updates have been installed and updates simply bring to the surface a problem that was not evident before.
  If the last thing people remember is to install the updates from MS, it's am understandable reaction in some way involve updates for updating the post problems when things don't work properly afterwards and especially during the next reboot.
  Another reaction is to try to remember all of the updates you have installed and somehow uninstall the updates one of the XP Recovery Console until you find one who is 'responsible '.  Unless you noted all issues of update, it would be more difficult, but not impossible.  It is unlikely that practical or useful advice in most situations, but you can of course try it.
  Security updates sometimes holes patch XP and when security holes are patched (and XP is "tighter"), affliction can no longer do what is done, things to happen are no longer allowed to happen as a result of the strengthening of security, the system has now a new problem (especially when it initializes more) , and it seems that install updates broken system while in fact, it's just a coincidence.
  Another thing that can happen is that the Microsoft updates will change or update certain critical files on the XP system.  Depending on what your software antivirus or antimalware software is, these programs can interpret the new or updated files to day as being a threat or somehow infected and quarantine (effectively delete) files it thinks are wary.
  The next time you restart your system, you'll have some sort of a problem, or you do not start if the files are missing.  Once more, the problem is not with the updates, it's another condition on your system with your antivirus or antimalware programs you beautiful little (they could be aware of what like the new look of Microsoft files).
  You may have seen some or heard talk about some of these kinds of people, but not too intellectually stimulating general or scenarios of error after update:
  NTLDR is missing or corrupt, ntdetect.com is missing or damaged, ntoskrnl.exe is missing or damaged, hal.dll is missing or corrupt, etc.
  These types of errors are usually very easy to fix, but if you don't know what's happening, the temptation is to do a repair installation, or if none of these kinds of things are really necessary, completely reinstall your XP.  I have never done a system restore, a repair install or reinstalled XP in my life to solve any problem (but I did the process for practice).  These things are simply not options with me.
  Given that Microsoft sends many updates on the second Tuesday of each month (they call it "Patch Tuesday"), this means that the or to the second Wednesday of each month there is an increase of 'problems' in the field - in particular the types of problems "my computer does not start after you install the updates from Microsoft.  That day is also known as "exploit Wednesday".
  You can read about it here: http://en.wikipedia.org/wiki/Patch_Tuesday
  It is likely that if you have a problem like this or after the installation of MS updates, someone else has also had the same problem and understood what to do about it.  A problem here, is that no one knows what is your problem.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• XP SP3 no sound after reinstalling the operating system

  Hello

  I have re-installed the SP3 of XP on my Toshiba laptop and it has no sound after that. You may have installed the operating system in "secret" mode and so there is no sound.

  I checked the audio settings are that all settings are correct.

  Is it possible to go back again to the sound.

  Kind regards

  R

  Hi RAJRAU,

  You can try to check if the onboard sound is disabled by checking the advanced settings of the BIOS.

  If so, try allowing it and see if it helps.

  You can see the manual of the system manufacturer or contact the system manufacturer for more information on how to make the changes in the BIOS.

  Note: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also read the following article and try the steps to solve the sound problem:

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-us/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• No sound after upgrade to security 2016-004.

  I installed Security Update 2016-004 this morning after updates. Everything was fine, including resetting.

  After the system came back, I noticed that the speaker in the title bar icon was gray and no sound speakers. However, the headphone sound output.

  System Preferences says "Digital output" that apparently my MBP 17 "end 2011 on Yosemite 10.10.5 has not.

  Can someone please help?

  Thank you!

  Fernando

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - subject

  Safe mode - Yosemite