Dell Latitude D630 with Kingston 120 GB SSD (evil?)

Similar Questions

• Dell Latitude d630 with Windows 7 edition integral-DVD drive has stopped working.

  On the Dell website, they don't support my laptop for Windows Vista and XP. Can anyone help?

  Hello

  ·         Since when you are facing this problem?

  ·         Did you change your computer before this problem?

  I suggest you to check first if the DVD Rom is detected in the Explorer or not.

  If this isn't the case, then I suggest you to run the fixit of the article below and check if that helps.

  http://support.Microsoft.com/kb/982116

  I also suggest you to run the fixit of the article below and check if it helps.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• I have a Dell Latitude D630 with windows Vista 32-bit professional I can download downloads of microsoft windows vista or the laptop just those

  I don't know more?

  There is only a single Vista for everything.

• I want to install OSX in my dell latitude d630 is it possible?

  I have dell latitude d630 1.80 GHz dual core with 2 GB of RAM and I was wondering to know that is there any way I can install OSX in my system?

  Mac OS X requires a Mac computer.

• I can see the webcam on my Dell Latitude D630 laptop, but cannot make it work on Skype... This isn't seeit. How to activate the webcam to use?

  I can see the webcam on my Dell Latitude D630 laptop, but cannot make it work on Skype... This isn't seeit. How to activate the webcam to use?

  Hello markward4905

  You should be able to download the drivers from the website of the manufacturer of your web cam.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Dell Latitude d630 and Windows 7

  Does anyone know why Dell does not support Win7 on a Dell Latitude d630?

  This machine was built with Windows Vista 32 - bit o/s on 24 November 2008. The date of the original invoice was on May 22, 2009. Win7 was not released until October 2009. The guy I bought it from had installed Win7 and I don't have the disks of backup or restore with it. It works fine except it doesn't have enough RAM, (which is not a big deal). The problems occurred when I tried to update the drivers and found that there is no driver for this model with Win7. When I called Dell, they said that they do not support Win7 on this laptop.

  So I was just curious to know if anyone knew why? I won't lose money, upgrading the RAM if Win7 is going to be a problem.

  Although W7x86 lists 1 GB as the minimum, I found 2GB for the sweet spot minimum.

  More RAM is always a good investment, and even if you decide not to run W7 on this PC (I hope that your friend bought the license outright to pass on to you), more RAM will be beneficial to XP, Ubuntu or another OS, you decide to run on it.  However, more RAM is unable to completely cure your slow, because this might be a result (partially or totally) infections by malware, software problems, corruption of the file system or a bad hard drive... a reinstall to your specifications may be in order.

  You can also try searching the forums (or Internet) to get an idea of real world experiences.  I think that there should be no problem... I managed a few s D830 (similar systems - a step towards the top, but even age/line) at work who has installed and have run W7 flawless.

• Quick adjustment driver for a Latitude D630 with Windows 7 32 bit

  I loaded Windows 7 Home Premium 32 bit on a Dell Latitude D630.  Is there a compatible with the D630 AND Windows 7 Home 32 bit Dell QuickSet driver?

  I tried to use the serial number, [ADMIN NOTE: Service tag deleted by the privacy policy], in order to obtain the correct driver from the quick set button, but the pilot was offered, R182249, would not load.  The Dell site also does not list Windows 7 in the drop down menu to the operating system.  R182249 is listed as pilot QuickSet for Vista 32 or 64 bit.

  Any suggestions?

  Thank you.

  R182249 is for Vista 64 bit only; It will not work on 32 bit OS.

  R180762 should load on Windows 7 32 bit, it worked fine for me on a D820.

  To be more specific try unofficial driver all I listed here:

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/4599.Latitude-D630-Windows-7-32-bit.aspx

• Dell Latitude D630 Blutooth problem

  Hi when installing new Windows 7 operating system have a problem with my Dell Latitude D630 laptop bluetooth device (internal bluetooth device D360 modul mini).
  In the Device Manager this medication is OK but when start connection with some externel device have a problem:
  Bluetooth device...-... No driver found

  then Device manager lokate the missing driver!

  My internal device is D360 modul and when to start seeking new solution Heve no positive response.
  Please help solve this problem
  Best regards
  J Skah

  Hi JSKAH,

  Welcome to the Microsoft Answers site!

  The error message you mentioned is because there is no driver installed for the Bluetooth device. You can access the link below and download the driver for the Bluetooth.

  http://support.euro.dell.com/support/downloads/download.aspx?c=uk&l=en&s=gen&releaseid=R231570&SystemID=VOS_N_1014&servicetag=&os=W732&osl=en&deviceid=15832&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=1&libid=5&typeid=-1&dateid=-1&formatid=-1&fileid=333170

  Let us know if the information was useful or installing the driver for the link has not fixed the problem.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 OEM from Dell on dell latitude d630

  Hey all, just have a problem, I would like to solve.

  I got my dell latitude d630 my parents last week and installed windows 7 ultimate 64-bit on it with a dell OEM drive, however, it is not marked as authentic. Why is this?

  Use a disc of windows 7 32-bit? I noticed that my great, active vista drive but it was 32-bit

  Any help would be greatly appreciated, thank you.

  You need a license key for 7 Ultimate - if this is what is indicated on the label of the system product key (in the battery compartment), you're ready.  If this isn't the case, you will need to purchase a license key.

• Dell Latitude D630 - lack of wireless network connection

  I have a laptop Dell Latitude D630 and we re-installed a new version of Windows XP on top an old XP version.  When the installation is complete, I went into network connections and all I have is the connection to the LAN.  There is no wireless network connection.  I went to Device Manager and it shows a number of conflicts in 'other devices '.  Under network adapters, it shows only the LAN adapter.  How to bring back the wireless network connection?

  Thank you

  rgepfert

  Rick,

  You've been a great help.  I have downloaded and run the updates in this order and am now able to use the wireless device and connect to the internet.  I kept your notes for later use when I have to do this again.

  Thanks for the help.

  Robert

• Problem Driver network Dell Latitude E5570 with MDT

  We received a lot of laptops Dell Latitude E5570. I want to install a picture on them, using MDT. I downloaded the file CAB for Windows 7, A02 08/03/16. Added to the output of the drivers on MDT as usual, then updated the deployment share.

  When you try to start the installation, I get an error in the wizard. Connect to the deployment share could not be established. The following network device has not been installed, PCIVEN_8086 & DEV_156F & SUBSYS_06DF1028 & REV_21

  I tried download the drivers for the network card on the Intel site and their import. This time, I can access the task sequence list. There's nothing wrong with the first part of the installation. When it comes to complete the installation, I get the same error of Assistant on the network device.

  Any suggestions would be welcome

  I finally got mine work. Drivers is must always use a combination of the taxi driver from Dell and Intel driver. If the version 3 of the TAXI driver who has been published will solve the problem?

  I try to import the driver directly from intel first as well as the cab file and see if it works. This is the link I used: downloadcenter.intel.com/.../Intel-Ethernet-Adapters-Connections-CD

  In the end, I think that my question was due to the SSD and the fact that I tried to start Win 7 x 86.

  After reading a couple of different forums, it seems new SSD require UEFi start to run, which is not supported in Windows 7 x 86. I tried an image with Win 7 x 64 and it worked the first time.

• Dell Latitude e5440 - Samsung 850 EVO mSATA SSD not recognized

  I bought a new 500 GB Samsung 850 EVO mSATA SSD for my Dell Latitude e5440 (running Windows 7 Pro).  The new player was not visible in 'Computer', so I downloaded, installed and ran the software Samsung magician.

  Samsung software shows that the drive is present.  And there is a button "Validate" - I clicked on - and now: ' Drive Health Status: Good ' and ' serial number: true "appears.

  However, the SSD is not visible when I double-click on computer and the Samsung software States:

  a. "AHCI Mode. Disabled (IDE or RAID).  AHCI mode is necessary for the best performance of the SSD. »

  b. SATA Interface s. o. cannot detect SATA interface details.

  c. s. o. OS OS optimization is supported only for disks using an operating system drive.

  Question 1: Activation of this AHCI mode will allow Windows to recognize the SSD?

  Question 2: How do I?

  Question 3: Activate the AHCI mode "switch off" (logout) my HDD 2.5 "?  (I want to keep Windows 7 to 2.5 "HARD disk and install Windows 10 on the SSD to have a dual boot system, until I got used to Windows 10).

  Inside of your battery compartment is a label with your license key Windows 7 OEM on it.  Photograph it.

  Download and prepare a USB key with a copy of Windows 10 TH2 Pro.

  Remove the disk 2.5 "and connect the new drive mSATA.

  Boot the system to the USB key.  10 Windows Installer should be of the presence of the DSS and will allow you to do the installation of Windows 10 - which in turn is almost certainly going to install the network driver suitable for your system without the need to add anything else.

  USE your 7 product key when prompted and you should be all set.

  Once this is done, you can reconnect the disk 2.5 "If you want to do - but remember that 10 installation is done separately from the 2.5 disk".

• Faulty network adapter Dell Latitude D630 XFR Constant.

  From a few weeks ago, my laptop started acting funny. Whenever I played Robocraft, it gives me this error message whenever I try to play on a server.

  Even with Garry s Mod

  

  Unplug it at random, but the State in the notification bar shows full bars / 4 bars and says "connected, access to Internet (WiFi SSID here)". " I tried various things, including making a restore complete driver for my network card, but failed. I tried to update too, but apparently that failed too.

  I'd appreciate any help given,

  Thank you!

  ~ Tekkit

  P. S.
  Windows 7 Ultimate

  Intel Centrino

  8 GB RAM

  64 bit OS

  Hi Tekkit,

  Thanks for posting your question on the Forums of community of Microsoft. I appreciate you providing a descriptive overview on the issue.

  1. Do you get this problem when your system is connected via a wired connection?
  2. You did it any significant hardware or change software on the computer before this problem?
  3. You are hosting the game server or simply connect to someone else?

  As you said, the question may arise due to the third-party firewall security software installed on your system or corrupt network drivers. To refine the question, I would like to connect once the system via a connection internet wired , i.e. via the connection cable directly inserted into the port on your system. In addition, please, try the following steps and check if the problem persists.

  Method 1:

  According to the manufacturer's website, it provides all the compatible Windows 7 drivers for model Latitude D630 XFR. Reference:

  http://www.Dell.com/support/home/us/en/19/product-support/product/Latitude-D630-XFR/drivers

  You can download the driver last wireless compatible with Windows Vista (64-bit) the link above and try installing the driver in compatibility as detailed below mode.

  1. Download and Save the Wi - Fi driver compatible with Windows Vista (64-bit).
  2. Right-click on the downloaded driver file.
  3. ClickProperties , and then select the compatibility tab.
  4. Check enable the option run this program in compatibility mode for: , then select Windows Vista from the drop down.
  5. Click OK and install the driver.

  For more information, please visit: make older programs run in this version of Windows

  If the problem persists, try Method 2.

  Method 2:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-7

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Dell Latitude: Scan with Windows 10

  I have a HP Deskjet 3520.  in a moment of pure, pure madness, I've upgraded to Windows 10.  Now my printer won't scan to my computer in pdf format.

  If I try to scan to PDF it is right there with a message "connecting to a computer" which remains for about 5 minutes, then he told me "the computer does not respond.  Check that the USB cable is attached or wireless works correctly and try again."  Yep, check it out and try to print of tp.  Yes, so the computer is obvioisly talk to the printer, try scanning in format PDF - not just the same message.

  Previously, he fortunately scanned word copy paper in pdf documents but not now.  My computer is a Dell Latitude E5500, already served by Windows 7.  Now I don't know even how to find out what is my basic computer.  I don't know that Windows (Microsoft I guess) kept sending messages that my upgrade was ready and that if I install all my data and stuff would be ok.  Well, it's not ok.  I don't want to do something harmful - I just want to be able to scan documents to PDF, so I can send by e-mail.

  Hello

  Thank you for using the forum.

  You have installed the FULL features software for your printer?

  If you haven't, here is the link for the download.

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3520-e-all-in-one-printer-series/5162504/model/5162505#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have downloaded and installed the printer, you should be able to use the software of the printer to scan.

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• Problem with Dell Latitude 2100 (with windows vista) is a driver (file: \windows\system32\drivers\msahci.sys) catch 22, it's that it doesn't have an internal cd-rom

  I have a dell latitude 2100 and when it is consumed first upward it goes to a screen of security and said that is wrong and it is said that the status of this file is 0xc000000f how I could fix this without an installation disk because it does not a cd-rom

  Hi Rick,

  Thanks for posting your query in Microsoft Community!

  The description of your problem, you are facing problems with your Dell Latitude 2100 and receiving tell them an error message which is bad and he said that the status of this file is 0xc000000f. In order to quickly provide a solution, please answer these questions:

  1. What is the exact error message with error code?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you check the drive for errors, and then check if it solves the problem.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

   

  Important: While running chkdsk on the drive, if bad sectors are found on the hard drive when chkdsk attempts to repair this sector, the data available in this area may be lost, and it is not recoverable.

  Method 2: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Note: It may prompt you to insert the Windows installation disc. However, you can use the external DVD player and check.

  Hope this information helps. Answer please if you have any additional questions about the problem you are having and we will be happy to help you further.