Dell Latitude D630 - lack of wireless network connection

Similar Questions

• Wireless network connection problem

  Nice day

  I have a wireless network connection problem and I ask for help to resolve.
  What surprises me that this problem appeared suddenly, I used to connect to the WIFI correctly but two days ago my laptop could not connect to the WIFI and more.

  Other devices and computers connect with success so I think that the problem in my laptop.
  I don't have any changes on my laptop or windows, antivirus, drivers... updates or installed new software.
  Troubleshooting of Windows detected 'router or access point issues '.
  -Reset the router does not resolve the problem
  -Network adapter is enabled.
  -State of wireless card "working properly" and "update".

  I read a solution on this site, which was to change the properties of the wireless adapter, but the changes mentioned does not appear in the pilot of my laptop...

  * My laptop info. :
  DELL INSPIRON 3521
  Windows 7-64 bit
  Dell WIreless 1703 802.11b/g/n(5.2GHz)

  Sorry for this long to make, I appreciated all the help.
  Thanks in advance.

  Hello

  Have you tried to reset your laptop to a time before this issue started with a Windows 7 Restore Point?  If it is a parameter change or software this restore point can help solve what is at the origin of the problem.

  I'd also, of course, when you are resetting the router, to make sure that you let it sit for at least 30 seconds to a minute before plugging power back in.  You may need to do a few times to clear his memory to be able to connect.

  In addition, have updated the drivers for the wireless card?  What version of driver currently installed in the system?  You can consult our support site, enter your serial number and click on drivers & Downloads to find the driver for your wireless card.

  Finally, have you tried to empty the wireless profiles that are currently stored in your system?   If you delete the profile current wireless (which is to control your connection to the router), reboot your system, and try to reconnect Windows will rebuild the profile and hopefully allow you to log in again.

  I would like to know if any of this helps.  To help resolve this more effectively please click on my user name Dell Todd and send me a private message with the Number of Dell Service from your system.  Please keep all troubleshooting and discussions on this thread open so that others can find the information they need to solve their problems.

  Todd

• Receive the message error "wireless network connection is not a valid ip configuration.

  Original title: unable to connect to wifi on windows 7 on Dell laptop

  Help!  I went on vacation and used my laptop to DVD play only.  I am now back home and cannot connect to the Internet.  I tried all sorts of resolutions without result.  When I use the Troubleshoot utility, it tells me to stop my router and turn it back on.  I've done this multilpe times at this point.  Once I keep in the resolution of the problems, I get the same message again and again: "wireless network connection is not a valid ip configuration.  I disabled McAfee and morning services.  I used the command prompt to reset WINSOCK, IPv4 and 6.  I turned power on and off wireless by using the key on the keyboard.  I disabled and enabled the network connection.  I have the driver-upated.  I know the router works properly from my iphone and iPad is all connected without problem.  I removed and added to the wireless network.  In the network and sharing Center (I would copy and paste the view up here, if I could, but since I can't get online...), it is said "unidentified network, no internet access" on the right side, and he also says that I'm connected to a public network.  There is no link to click for the public network and I can't seem to find a way to change it to the House (there are no options, no links).  I tried to solve this problem, after I get home from work every night and I'm so frustrated that nothing works.  Please, please help!

  Kristine,

  Please try these steps before replacing the adapters and let us know the results.

  1. To open a command prompt, click Start , and then type CMD in the programs and files.
  2. Right click on CMD.exe in the programs icon and select run as administrator.
  3. When the user account control pop up box, click Yes.
  4. At the command prompt, copy and paste (or type) the following command and then press ENTER:
     netsh int ip reset c:\resetlog.txt

     Note If you do not specify a path of the directory for the log file, use the following command:

     netsh int ip reset resetlog.txt
  5. Restart the computer.

  If the problem persists, go through the given suggestion't-have-valid-ip/62ca59b1-c173-4465-9153-554a13928315 http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/wireless-network-connection-doesn

  Hope that these measures could help you.

• Dell Latitude D630 Blutooth problem

  Hi when installing new Windows 7 operating system have a problem with my Dell Latitude D630 laptop bluetooth device (internal bluetooth device D360 modul mini).
  In the Device Manager this medication is OK but when start connection with some externel device have a problem:
  Bluetooth device...-... No driver found

  then Device manager lokate the missing driver!

  My internal device is D360 modul and when to start seeking new solution Heve no positive response.
  Please help solve this problem
  Best regards
  J Skah

  Hi JSKAH,

  Welcome to the Microsoft Answers site!

  The error message you mentioned is because there is no driver installed for the Bluetooth device. You can access the link below and download the driver for the Bluetooth.

  http://support.euro.dell.com/support/downloads/download.aspx?c=uk&l=en&s=gen&releaseid=R231570&SystemID=VOS_N_1014&servicetag=&os=W732&osl=en&deviceid=15832&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=1&libid=5&typeid=-1&dateid=-1&formatid=-1&fileid=333170

  Let us know if the information was useful or installing the driver for the link has not fixed the problem.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I remove additional wireless network connection?

  In trying to solve a network problem, I have created another problem. Now, I have an additional network connection called 'Wireless Network Connection 2'. It is shown as "Not connected" and the name of the device is "Microsoft Virtual WiFi Miniport Adapter."

  How can I remove this? The "Delete" option is grayed out when I select it.

  In trying to solve a network problem, I have created another problem. Now, I have an additional network connection called 'Wireless Network Connection 2'. It is shown as "Not connected" and the name of the device is "Microsoft Virtual WiFi Miniport Adapter."

  How can I remove this? The "Delete" option is grayed out when I select it.

  You don't want to remove this adapter. Its used if you want to configure a wireless connection hosted. See the following articles for more information.

  http://www.TechRadar.com/news/computing/PC/how-to-turn-your-Windows-7-laptop-into-a-wireless-hotspot-657138

  http://msdn.Microsoft.com/en-us/library/dd815243 (vs.85) .aspx

  An example of the real world. I had this guy's going asking him to copy the netsh from another PC program. The netsh program was lacking in his Win 7 machine for an unknown reason.

  http://www.dslreports.com/Forum/remark, 23810967

  MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• I want to install OSX in my dell latitude d630 is it possible?

  I have dell latitude d630 1.80 GHz dual core with 2 GB of RAM and I was wondering to know that is there any way I can install OSX in my system?

  Mac OS X requires a Mac computer.

• Equium A60 - no wireless network connection

  Hello world

  I have had a good look through the forums and can't find anything related to this but my apologies if this has been addressed elsewhere :-)

  I set up a wireless home network with a Windows XP desktop computer with a router and a laptop old Win98, WinXP SP2, which I can't connect and an Equium A60. I installed two different network on the A60 USB adapters, seems to be okay with all of them except that there is no "wireless network connection" listed under network connections Control Panel. Both cards work fine on two other machines, so there must be a problem with the A60. I installed an adapter and then uninstalled before trying another.

  Under control-> connections Panel Network, I can see an old broadband connection and the connection to the Local network (which is allowing me to connect to the router via Ethernet, so that the router will work), but the wireless network connection icon is not there. The driver for the USB adapter makes its appearance in Device Manager and is reported as working properly, but if it worked correctly then (I think) a wireless connection icon should appear - it happened with my other WinXP desktop.

  Any ideas of what could be the cause?

  Thanks in advance
  Gareth

  Post edited by: g_shaw - added a few details

  Hello

  I guess that the external WLan USB stick has been recognized one installed correctly. You said it appears in Device Manager. Are you sure that the WLAN USB key has been recognized to 101%? !!

  If the WLAN USB key is recognized correctly, check the properties of this stick. (I think you should right click and then click on properties).

  But if the stick was not recognized, you must verify the properties of the single USB ports and power safe mode.
  Choose the USB single root hubs in device, right click, properties, tab power management Manager and disable the option called allow the computer to turn off the device to save energy.

  So maybe it helps

• "Wireless network connection" is not a valid IP configuration. "

  When I try to connect to the internet via a wireless connector I can but it takes anywhere from 10 to 20 minutes and many attempts that all generate the message title above.  but then it finally works.  It works great once its connected but the same connection problem happens the next time that I try to connect.  I don't know much about the technical problems for all responses must be in pretty easy to understand the jargon and thanks :)

  Hi Richard,

  Welcome to the Microsoft community.

  According to the description, resembles the internet connection is slow.

  What operating system you have installed in the computer?

  I suggest you click on the links and follow the instructions to resolve this problem:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please post back with more details so that we can help you better.

• Wireless network connection

  I am an employee of Life Insurance Corporation of India.When I turn on my PC in the office premises, a connection named "dlink" appears in my PC. After the connection (without using any modem or external device) I can browse the internet. How is that possible? The brief description of the connection is the following:

  Wireless network connection

  Connectivity: Internet IPv4

  Name: dlink

  Strength: good signal/fair/poor

  Security type: unsecured

  Radio type: 802.11n

  SSID:Dlink

  Should I access the internet by connecting through this link? Y at - it all threat to the security of my personal information or whether it's bad for me. Please notify. The link also shows a message that "the information transmitted by means of this link can be visible to others". Please specify.

  Hi SANJIT_78,

  ·         The computer is connected to a domain environment?

  ·         Are you facing any performance issue with wireless network connection?

  ·         What operating system is installed on the computer?

  The computer you are using apparently have a wireless network interface installed in it and therefore can detect and connect to any available wireless network. The dlink network is the name of a wireless network available in your area and your computer to connect to this wireless network.

  Wireless networks more private need a password to connect to them and therefore are protected. But the dlink network to which you are connecting is apparently a public wireless network, and it doesn't have a password to connect to it. So which allows any user to connect their devices to this network wireless. Due to this insecure wireless network mode, your computer displays you the message "the information transmitted through this link may be visible to others". If you want to connect to this wireless network, I suggest you first protect your computer with a good program antivirus and firewall.

  To enable the Windows Firewall on your computer, you can check this link:

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  http://support.Microsoft.com/kb/283673

  Hope this information helps.

• Said connections wireless network connection are available, but the networks to connect to are no longer visible in the connection

  I got a new laptop from work and have connected a couple of times on our network.  Now, he does not connect through the wireless network connection.  He said that the connections are available, but there is no connection available more in the list.  If you have to manage wireless networks, it is in the list... but you can not log in via this page.  Any help would be grateful.

  Thank you!

  Hello

  1. what operating system you are using?

  2. how many computers is connected to the network?

  3 - is a domain network?

  4. What is the exact error code or error message you received?

  5 have have there been recent changes made on the computer before the show?

  Follow the steps mentioned below and check if that helps.

  Method 1: Troubleshooting run Network.

   

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  Method 2: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If you cannot connect to a network, it could be a problem with your network adapter. You can try to use the network adapter troubleshooting utility to automatically find and fix some common problems.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 3: Disable the security software and check.

   

  You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  For more information, please see the following links:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope that helps!

• I can't print due to the "wireless network connection" doesn't have a valid IP address.

  Cannot print wireless

  I can't print due to the "wireless network connection" doesn't have a valid IP address.  How can I fix this problem myself (an absolute non-techie)?

  Hello

  -Did you change your computer, after which the question began?
  -Check if you are connected to the network?

  The question seems more like a network connection problem. I would like you to do the following.

  Method 1: run the Network Troubleshooter utility and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   
  Method 2: release and renew the IP (Internet Protocol) address and see if the problem persists.

  has. click Start. Type cmd in the search box and press ENTER.
  b. at the command prompt, type the following command and press ENTER:
  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.
   
  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer is not getting an IP address from the router.
  If this is the case, try this:
  ·        enough ipconfig at the command prompt and press ENTER
  ·        ipconfig / renew in the command prompt and press ENTER

  Method 3:

  Network printer problems

  Note: The steps also apply to Windows 7.

• Wireless network connection does not

  I can't access a wireless connection with my computer wireless network connection. The icon in the bottom right of the screen shows a red X and says 'not connected wireless network connection. The wireless on my keyboard button does not illuminate

  I tried to change the channel on the new ADSL2 wireless router and refreshed looking for wireless connections, but still not found connections. I have not used a wireless router before and never used a wireless connection with this computer so I don't know if the wireless card works or not, if the properties of the wireless adapter indicate that it works. Is there a way to check if the computer's wireless card is running or connected and if not, how can it be connected? Thank you

  I finally understood by trial and error, why I was unable to connect wireless to a modem, that you sent me. In my control panel, I found that the properties of HP Wireless Assistant had "Hide status icon" checked, so I checked it and the icon came in the bottom right of my screen. I left then clicked that icon and it showed the wireless and bluetooth was OFF so I went in and it now works.

  Why HP support could not help me in what I don't know, I just got the race!

  Hope this helps others with similar problems.

• An error occurred while renewing interface wireless network connection: unable to contact your DHCP server. Request a expires.

  I use an Acer Asspire One with Windows XP. We have wireless through AT & T Uverse. The netbook has an Atheros AR5007EG Ethernet card.

  A number of things have taken place lately: I had not used the Acer for some time and the battery was dead and would not recharge. I could book until when it was plugged, but could not get on the Internet. I found online that the solution to the battery problem was to download a new bios that worked wonderfully and it is now loaded. Recently, our AT & T router died and was replaced. I put the new WEP keys in two other computers, and they connect to the Internet. I can't connect to the Internet with the Acer. I tried ipconfig / renew and get the error message: "an error occurred during renewal of the wireless network connection interface: unable to contact your DHCP server.» Request a expires. No operation can be performed on Local area connection while it has its media disconnected. "On the tab"Choose a wireless network", it shows my network and said"absorbing the network address"but nothing happens. When I do ipconfig I see that there is no IP address.
  I took the computer to Starbucks this morning, ran ipconfig / renew and she acquired the IP address and I was able to connect to the Internet. I brought the computer home and tried and failed to connect. The IP address is back to 0.0.0.0 and the error message appears when I try to renew it.
  I hesitate to make a lot of changes since it was working with a different network.
  Original title: IP address is missing
  These forums are wonderful. I tell myself that I've saved the cost of a new battery using the bios, I found on a forum!

  Hello

  DHCP - Dynamic Host Configuration Protocol is a protocol used by devices computer network (DHCP clients) that dynamically distributes the IP address of the destination host. Now the error indicates that your computer is not able to communicate with the server and assign the IP address.

  Method 1:

  Let us try to disable the firewall and check the issue.

  Note: Re-enable the firewall after checking the issue.

  Check whether the problem is resolved.

  Method 2:

  If the issue is not resolved, you can follow the steps from the link provided and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Hope this helps and let us know if you need more assistance.

• NO wireless network connection - message "Windows could not find a certificate to connect to the network Shaida. How to fix this problem?

  I had just restored my Thinkpad T60 the default setting. Reformatted and reinstalled Windows XP, but I am unable to connect to the wireless network connection - message "Windows could not find a certificate to connect to the network Shaida.

  Shaida is my wireless modem.

  How to fix this problem?

  Before the resumption of connection Internet worked normally.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/870702

  It will be useful.

• My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network.

  My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network. This started after my last Microsoft update has been installed. .

  original title: status: network address acquisition
  Hi BKlap,
   
  Try these methods in the order.
   
  Method 1: Repair the network connection to solve the problem.
  For more information, see:
  To force a network adapter to acquire an IP address
   
  Note: The information in the article applies to Windows XP Home Edition as well.
   
  Method 2: Follow the steps listed in this article to resolve the problem:
  How to troubleshoot connectivity TCP/IP with Windows XP