HP scanjet 5370c scanner

Similar Questions

• Windows 7 will not recognize driver for HP Scanjet 5370c scanner

  I was not able to get Windows 7 to recognize the driver for my HP Scanjet scanner on my new HP Pavilion Elite a9200z desktop computer.  I tried to install the original driver delivered with the software that not only failed, but it was necessary to do a system restore to an earlier date.  After downloading the software update and the driver on the HP website (for the XP operating system. (No), the software successfully installed but Device Manager said there is no driver installed.  I tried Udating driver in Device Manager, but none were found on the system.  I'm afraid that because the driver is not signed by HP, this is perhaps the reason that the system will not recognize it.  I do not receive a message about the driver being made and has been disabled.

  Where would the driver have been installed under Windows and what would be the name of the file?  Is it possible to install a driver that has not been signed on Windows 7, even though I know that it comes directly from the manufacturer.  I came on this forum that says HP email support is no longer in effect for this scanner.  Scanner was working fine under Windows XP.  Thank you in advance for any help you can give me.

  Thank you for your response.  I posted the same question to the Board of Directors Microsoft as well.  One of the technicians gave me a link to a website that has software in support of scanners which pilots the manufacturer has not, for some reason, took worth to upgrade to Windows Vista or Windows 7.  I installed Vuescan driver bundled with the program which works perfectly, and my scanner HP Scanjet scanner 5370c is upward and great in Windows 7.  They have a list of more than 100 scanners supported by the program.  So, anyone interested should check the list before you buy the program.  No, the program is not free, but it is much cheaper ($39.95) that pitching on a scanner perfectly ideal of work and having to buy a new one.    Anyway, if anyone is interested in the possibility of using their scanner ' is no longer supported "with Windows 7, the website below might help.

  http://www.Hamrick.com/

• How can I get my old scanner (HP ScanJet 5370C) to work with my windows 7?

  I tried to plug my old scanner to our new computer which has windows 7 now and it says that it cannot find driver.  Help, please.

  If HP does not have a W7 driver then it will be difficult.

  I found this on the HP website - http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/ScanJet-5370C-and-New-HP-PC-w-Win-7/td-p/169429 I think it's for your scanner.

• ScanJet 5370C: is there a Windows Vista compatible driver for Scanjet 5370C

  Analyze the used to work OK with Windows XP now want to use it with Windows Vista, but need a Jet pilot. USB connection.

  ScanJet 5370C y at - there a driver available?  Is no longer supported by manufacturer

  You could set a scanner driver generic as the driver of the HP 5000 here series:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03408379

  Driver ot the 5300 here:

  http://www.nodevice.com/driver/company/Hewlett-Packard/scanner.html

  Also, there is a program out there called vuescan which can provide a generic twain driver.

• HP Scanjet 3500c: Scanner operation

  I want to use this scanner with Windows 8.1 because it scans photos, negatives and slides, and has done for many years.  I tried to install it on my new computer, but it would not install - ostensbly due to missing driver, although I have the original disc with the software of the product.

  HP website lists the product but has no answer for the download of updated drivers.

  Hey 54jack,

  You can check the Scanjet G3110 which seems to meet all your needs:

  http://shopping1.HP.com/is-bin/Intershop.Enfinity/WFS/WW-USSMBPublicStore-site/en_US/-/USD/ViewProductDetail-start?ProductUUID=COcQ7EN5q6UAAAEtOyRVIOHN&CatalogCategoryID=k1cQ7EN6A1EAAAFC5fNenJVw

  So the 5590 model might be applicable:

  http://shopping1.hp.com/is-bin/INTERSHOP.enfinity/WFS/WW-USSMBPublicStore-Site/en_US/-/USD/ViewProductDetail-Start?ProductUUID=0rQQ7EN5Lq4AAAEtgRdVIOIF&CatalogCategoryID=k1cQ7EN6A1EAAAFC5fNenJVw&JumpTo=OfferList

  Kind regards

  Shlomi

• HP Scanjet 8270 scanner on both sides when in the charger.

  
  

  Never mind. I thought about it shortly after that I posted my question. There is the two-sided forward button near the left. I just need to switch it on one side instead of both sides. It's funny how sometimes in life the solution to our problem is slightly

  Deena2012 wrote:
  

  How to stop the engine of analysis from the analysis of both sides of the document. I tried to use the settings option and not checking the option «scan both sides of the original by using the duplex document scanner» This occurs when you use the charger.

• 4050 ScanJet photo scanner: downloaded the new software and drivers for HP

  Photo scanner and os X P 4050 scanner has stopped working and went to hp website and downloaded the software installed. System would not open or scan. I've tried a lot of ideas but have not succeeded. I have a HP printer also and am about to delete all hp software and start again. Any ideas would be greatly appreciated.

  George

  follow-up of your prospects and had partial success. I went back and downloaded the software again and the good results.  Thank you!!!

• For Scanjet G4010 scanner software

  I used a G4010 with Win XP and when I changed to Win7 the scanner software will not work. I get the message of the solution Center HP that installation is not complete. Scanning works in Windows mode, but now I can't scan slides and negatives. I downloaded fron HP homepage upgrades.

  The software you use, mini, likely out of date for Win7. Follow the link below, then select your operating system (you need to know if it's 32-bit or 64-bit).

  http://goo.GL/1ae8H

  Complete the installation and let me know if it works!

• ScanJet G4050: Scanner does not any software application launch.

  G4050 scanner fails to scan initiated by app.  Just stopped working 'out-of-the-blue '.  Analysis with a touch, but only in the format JPEG (any key).  Have uninstalled SW and reinstalled 'full-solution' several times without any change.   HP Print/Scan doctor fails «Front Panel Test', States «problem with the software of façade»  Same prob with Win 7 and Win 10 update.

  Hello

  Thank you for using the HP forum.

  You can try this alternative scan software:

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Let us know if it works.

• Need software/drivers for HP ScanJet 5550c Scanner Series for Windows 7

  I have Windows 7, but the installation CD scanner is for Windows XP or earlier. Need me more of software or drivers? Or I can directly scan documents to my machine?

  Hello

  You should check with HP to ensure that the scanner is compatible with Windows 7 and there are drivers available for this device.

  HP technical support:

  http://welcome.HP.com/country/us/en/welcome-copy.html#support

  Concerning

• ScanJet adf scanner c7670a stopped automatically feeding. It scans from the glass. OSX 10.4.11

  suddenly the scanjet adfc7670a stopped automatically feeding paper.

  It scans from the glass distillers. the OS is OSX 10.4.11.

  a console error message indicates an error with USB which led me to believe that he could be on low power USB.

  (why all of a sudden don/t know).

  to test I used a powered USB hub. No not the USB message in the console and the adf does not always work.

  I checked for paper jam. Although no paper jam, I went through the hatch opening procedure etc. still no go.

  There is a mention of the worn rollers. How will I know if the rollers are warn out before I go and buy a roller kit?

  any other ideas?

  FIXED.

  the problem was that the ADF cable in the back (apparently) not completely took place.

• Is there a driver for HP Scanjet 5370C that works for Windows 7?

  I have upgeaded from Win XP to Windows 7 and HP scanner does not work. HP doesn't have a driver to Win 7 support.

  After double checking of this list, you are right in saying that there is no Win 7 drivers.   On a better note, it had a link to third-party software solutions scan on the HP website. Try these drivers, they might work for you.

• help develop drivers for HP Deskjet 6122 printer/HP Scanjet 3500c Scanner for Windows7.

  Is my question an oxymoron

  Hello

  To the printer, no more support, you must use the Windows 7 driver to perform basic printing:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=83027#n181

  The scan: only for 64-bit:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2100&LC=en&cc=us&DLC=en&sw_lang=&product=73488#N161

  Kind regards.

• I need a driver for my scanner HP Scanjet 3530c Scanner

  where is the link to download the driver for windows 7 (64 bit)?

  where is the link to download the driver for windows 7 (64 bit)?

  On the HPs website - you know - those people who make and support the product.  ;-)  (IF they have decided to support this specific product under any operating system you chose to run, you'll find it here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=73497&lc=en&cc=us&dlc=en&lang=en&cc=us)

  And they are not - it seems.  Order in Windows Vista.

  You may be able to use the Vista x 64 driver.

• HP ScanJet 5300C scanner

  Where are the answers?

  And where is the issue?

  Visit the HP support site