Dell Poweredge 800 compatibility

Similar Questions

• Video card HDMI in DELL PowerEdge R320

  Buongiorno,

  Announcement of riguardo chiedo UN UN Dell PowerEdge R320 informazione:

  Ho di installare una scheda video by poter cute need a monitor HDMI quindi con uscita is dedicated.

  Could gentilmente elencarmi quali sono compatibility modelli con questo Server?

  Thank you, Andrea.

  Buongiorno,

  will one OTS ' email by putting our server it service tag del suo.

  Grazie

• HP StorageWorks MSL2024 tape library integrate R720 Dell Poweredge

  Hello

  I have a dell Poweredge r720. I want to integrate HP MSL 2024 so I need to install the LSI SAS9212-4i4e interface card.

  Is this compatible with poweredge r720?

  Hello simpleguy3k,

  This is a combo card because if you connect hard drives you can use it as a raid card, or if no drive is directly connected to the card then it can serve as a relay SAS card. Also, I checked the compatibility of the guide & it supports two different tape units. http://www.LSI.com/downloads/public/host%20Bus%20Adapters/host%20Bus%20Adapters%20Common%20Files/LSI_6Gb_SAS_SATA_HBA_Compatibility_List.PDF

  Please let us know if you have any other questions.

• power supply for Dell PowerEdge SC1430

  How can I order a power supply for Dell PowerEdge SC1430?

  Maintain the NOTE from the ADMINlabel: maintain the label removed by privacy policy >

  Call Dell Firewall 1-800-357-3355 parts and ask for prices and availability of the Dell Reference number. Or simply search the Web for the part number.

  MK463 Delta power 750w
  U9692 Hipro power supply 750w

• Install.VGZ fails in ESXi 4.1 install on a Dell Poweredge R710

  I have a cluster of ESXi 4.1 six-host running on Dell Poweredge R710.  They start from a USB key connected to an internal USB port.  I did at least 12-20 installs on the same hardware without problem.

  When I try to re - install on the single ISO ESXi 4.1 host via the iDRAC, the installation fails when loading install.vgz with the error message: "Booting: MBI = 0x000100c0, enter = 0x0040024a.

  I studied the two codes and the only suggestion that I get, it's that my hardware is not supported (specifically that my 32-bit processor is not supported).  I do not have a 32-bit processor, so I know that I can surrender.  I downloaded the CPU VMware ISO (file:///C:/Users/pguarco/Downloads/VMware-CPU-Compatibility-e.x.p-160658.zip) compatibility, and my CPU meets all requirements.  Previous installation of ESXi host crashed for unknown reasons, where the re - install.  It is possible, that there is a hardware problem.  Any ideas on how to limit this problem?

  you are doing the right thing. only thing I could thing is bad ISO, (Please make sure that the checksum is correct). and the worst case material PE firmware update.

• ESXi 4.0 and DELL PowerEdge T100

  Hi all

  I have a question to any user of the T100 Server (or anyone abe to solve my problem). I want to buy a DELL (round) Server compatible with ESXi 4.0. But I have a problem with the compatibility logging, I found a document from DELL:

  http://support.Dell.com/support/eDOCS/software/eslvmwre/vs/AdditionalDocs/compatbltymatrx/compmat.PDF

  Who informs on the compatibility of the T100 with ESXi 4.0 server. On the other hand on the compatibility list VMware it is said T100 is compatible with ESXi 4.0 but with Intel Xeon 33xx series. I have not found an exact match as Intel Xeon 3300. But in the configuration of the server, I found a processor like the Quad Core Intel® Xeon® X 3330; 2.66 GHz, 2x3M Cache, 1333 MHz FSB, 95W TDP.

  And my question is this compatible with ESXi 4.0 Server and CPU? Anyone tried this configuration or knows answer this question with certainty? It would be very helpful because if I buy T100 which won't be compatible with ESXi 4.0 it will be useless. Please do not suggest other DELL PowerEdge servers - I have no money for them.

  Thanks in advance.

  The selected processor would be correct. I don't know if controller SAS 6iR has of a cache battery module, but it is worth for the performance of the disk.

• Card LaCie esata PCI card on windows 2003 server Dell poweredge T410 error code 10

  Hi guys, I am trying to install a new card Lacie esata PCI card (http://www.lacie.com/products/product.htm?pid=11217) on windows server 2003 on Dell poweredge T410. Windows detects the card and install the driver, but then, it shows an error code 10 "device Can not not started. I tried the update, uninstall, reinstall, adding Lacie driver CD through the "Hardware Wizard', chaning PCI card slot by 4 to 1. But nothing has worked. So please let me know if you think that there is a fix for this solution. Thank you

  Hi Rlap,

  The question you have posted is related to Windows Server and would be better suited to the TechNet Discussion groups. Please visit the link below to find a community that will provide the support you want.

  Windows Server Forums: http://social.technet.Microsoft.com/forums/en/winservergen/threads

• Ventole Rumorose DELL PowerEdge 850

  Buongiorno,

  avrei need di UN preventivo relativamente all'intervento di a vostro tecnico per sostituzione del corpo che sono diventate ventole molto rumorose knew a Dell powerEdge 850 service tag 93F5F2J.

  In attesa di a vostro riscontro Patu speaking saluti

  Marco

  Buongiorno, OTS will in privato a ' manage the request email.

  Grazie

  Marco

• Ordine brain DELL POWEREDGE R720 - disco rotto

  Buonasera,

  I wanted to get one offer by the di UN SAS price disco da 7.2 krpm 1 TB 2.5 "by server of he DELL POWEREDGE R720 nostro.

  Grazie.

  Saluti,

  Buongiorno,

  Può acquistare disco it a questo link

  Accessories.euro.Dell.com/.../Category.aspx

  Marco

• Brain price DELL POWEREDGE R720

  Buonasera,

  Vorremmo ricevere quotazione by disco of the di UN SAS 1 TB 7.2krpm formato 2.5 "price.

  He nostro Server e a DELL POWEREDGE R720 (serial number: xxxxxxx).

  Grazie.

  Saluti,

  Buongiorno,

  Può acquistare disco it online a questo link:

  Accessories.euro.Dell.com/.../Category.aspx

  Saluti

• Dell PowerEdge Server - IDRAC R720 problem

  Dear support team

  I have a Dell PowerEdge R720 not ready iDRAC server. The configuration values are not available. very strong fans noise, please notify

  Hello

  I'll send you an email to ask for the serial number. Thank you

  Marco

• The Dell Poweredge C6100 XS23-TY3 server: Max supported 3.5 "SATA HDD TB size

  Hello world

  Is someone can please tell me that what is maximum supported 3.5 "SATA HDD by Dell Poweredge C6100?

  Thank you
  -Said

  Hello Saeed

  The SATA drive bigger than we sell to the C6100 2 TB, but we sell Nearline SAS up to 4 TB of the C6100. I see no reason for a SATA drive more 2 TB should not operate.

  Thank you

• Dell PowerEdge T110 II add on the video graphics card that works

  The system configuration:
  Dell PowerEdge T110 II
  BIOS 2.8.0
  RAM 2x8GB

  For many reasons (for example feeding bus PCI), it is difficult to install a Dell PowerEdge T110 II graphics card.  The ATI Radeon HD 5450 is a good choice for the Dell PowerEdge T110 II because if its (approximately 10W) low energy consumption.

  After trying several HD 5450 (listed below), a graphics card that works is a "VisionTek Radeon HD 5450 - graphics card - Radeon HD 5450 - 2 GB memory DDR3 - PCI Express 2.1 x 16'.

  Edit: Thanks to paikat for the following references, (see his assignment for the links, where to buy)...
  VisionTek manufacturer: 900356
  Reference Dell: A6173020

  This card works when the monitor is connected to the VGA/D-SUB/DB15 connector. I wasn't looking to connect to HDMI or DVI connectors.

  After you install this graphics card, passed the BIOS Setup:
  Integrated Devices > integrated video controller: enabled

  by saying:
  Integrated Devices > integrated video controller: Standard

  and allowed to move from "Standard" to "Distributed" so it now says:
  Integrated Devices > integrated video controller: distributed

  Note: Install the card with the monitor connected to the integrated video port / edge, change the BIOS to Distributed settings, restart the computer and then connect the monitor to the Discrete / distributed / video port to Add on.

  Here are the identifiers on the "VisionTek Radeon HD 5450 - graphics card - Radeon HD 5450 - 2 GB memory DDR3 - PCI Express 2.1 x 16'

  54502GBPC
  VT 5450 PCIe 2GB V/D/H
  VT-400746PC
  PCB #R81KLD-PJ3Z
  R71KLD
  R81KLD
  Version: 1.0
  G0850000-0351L002739CZA-0087
  SH6 94V-0
  E248779

  Here are some pictures of the 5450 VT from DELL:

  

  

  Other video cards that have been tested and work well in T110 II are:

  * XFX Radeon HD 5450 1 GB GDDR3 VGA/DVI/HDMI Low Profile PCI-Express graphics AMD card HD545XZQH2; HD-545 X-ZQH2
  Note there is another version of this card is ONXFX1PLS2 who has not tested.

  * EX-PX610GT-video JATON GeForce GT 610 2 GB 128 - Bit DDR3 PCI Express 2.0 x 16 HDCP ready low profile ready card video

  * Reference DELL SOUND H545H1G Radeon HD 5450 (Cedar) 1 GB memory DDR3 64 bit PCI Express 2.1 x 16

  I hope this can help others avoid the frustration when you try to install a video card in a Dell PowerEdge T110 II.

  SR2002

  I have read this thread and seen the suggestion of VisionTek, it also works with the card mother E3-1230V2?

  My guess is the Dell PowerEdge T110 II uses the same motherboard for various configurations of CPU, but this is only a guess.

  SR2002

  Also, are there better options eventually with the support of 12 DDR5 and directx?

  None that I know, but I've only tried a few cards. Please let us know if you find cards better than the VisionTek 900356

  SR2002

  I saw a thread suggesting ASUS GTX650-E-2GD5, someone at - he of the inputs on this card?

  I tried a GeForce GT 610 2 GB and it did not work.  Check the use of the GTX650-E-2GD5 (DPT) power and make sure that it is less than 25 watts (see below)

  Quick notes:

  1. the location of PCIe x 16 is actually a "full-size x 8 slot" (also known as an x 16 slot / x 8) and the video card needs to work in this type of accommodation.

  2. video card power (TDP) is a limiting factor. Technical guide Dell says "the system supports a maximum power of 25 W for all four cards PCIe.»  and said Dell owner's manual "ATTENTION: to ensure correct cooling, not more than two cards of four extension may have more than 15 W power consumption (maximum 25 W each), not to mention the integrated storage controller card."

  3 install the card with the monitor connected to the integrated video port / edge, change the built-in BIOS devices > on-board video controller 'Activated' / 'Standard' to 'Distributed', restart the computer and then connect the monitor to the Discrete / distributed / video port to Add on.

• Is it possible to Flash a BIOS SC8000 Compellent to make a Dell Poweredge R720 BIOS?

  Is it possible to Flash a BIOS SC8000 Compellent to make a Dell Poweredge R720 BIOS?

  Similar to the way you can Flash a BIOS NX3000 to make a R710.

  I tried to Flash the BIOS in several different ways, including the BACK update and addition of /forcetype, /brandname and /forceit.

  Any help would be appreciated.

  Hello, tjkc80.

  So, the quick answer is no. You will not be able to do. In the case of NX, it is simply a R710 we have renamed, attached an MD for sold and additional storage in the form of an appliance. You are able to 'rebrand' that the return to a R710 because he was once a R710.

  In the case of the SC8000, there has never been a powerful storage controller. It cannot be "flashed" on a server, because it has never been a server. It is built and designed as a storage controller.

• (Redirected) Dell poweredge 1950

  I have a dell poweredge 1950 server that was given to my school and I am trying to install windows server 2003 on it, but an error saying:

  Setup did not find any hard drives installed in your computer.

  Make sure that the hard drives are powered on and properly connected to your computer, and that any hardware configuration of the drives is correct. This may involve a diagnosis provided by the manufacturer or the installer running

  How can I fix?

  I also tried to boot Ubuntu from a usb key and that no longer works.

  I also said to update BIOS or Flash the Bios but I don't know how to do and do not know if that'll fix it.

  I want to just get to the top and running, it can be Ubuntu or windows everything is easier.

  Any help would be greatly appreciated

  Better for this post in the Forum Server-PowerEdge, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.