Similar Questions

• Dell Poweredge T 310 - memory problems

  Good afternoon.

  I have a Dell PowerEdge T310 running Windows 2008 R2 server.

  It came with sticks of memory without buffer 2 x 2 GB 1333 Mhz. (4 GB Total)

  I've added sticks of memory 2 x 2 GB 1333 Mhz unbuffered and it worked very well send me a 8 GB of total memory.

  Last week I bought an another memory sticks without buffer 2 x 4 G 1333 Mhz, to make it to the 16GB total, using all six (6) available slots on the motherboard Intel XEON based.

  Now, the server does not start and gives me an error of memory on the front screen.

  If I take 2 sticks, using only the new 2 x 4 GB and 2 x 2GB memory stick the server will start without any problems.

  I'm looking for answers 'why' this will not work with 4 x 2 GB and 2 x 4 GB sticks using all 6 (six) places available.

  I am eager as much memory as possible and use all 6 locations.

  I can buy 6 sticks of memory "recorded", but if that no longer works I hesitate to purchase.

  Any help would be greatly appreciated.

  (Navigation on Amazon, I find a kit of registered models they say will work Dual Rank and having the possibility to use all 6 locations):

  24GB (6 x 4 GB) KIT for Dell PowerEdge series M610 (ECC Registered T310 (registered ECC). DIMM DDR3 ECC registered PC3-10600 1333 MHz Dual Rank memory RAM. Real brand A-Tech.

  ReneWold,

  Question you see specific Udimm. Like the T310 only supports up to four access unique. As seen on page 109. If you were to go to access fourth instead, then would you be able to use the 3 DIMMs per channel, allowing you all DIMM 6.

  Let me know if this helps answer your questions.

• Dell PowerEdge R320 iDRAC initialization...

  I installed windows server r2 2012. After installation, I tried to update the version latest iDRAC, but after the installation, my system has been restarted. But now it stack up to the iDRAC initialization a few minuets and give massage iDRAC initialization failed and restarted again and again... Keyboard and display smart system also does not work...  Please let me know how I can fix this problem...

  Khuram_Rafiq,

  The first step is to clear residual electricity system to disconnect power cables and then press and hold the power button for about 15 seconds. If the system boots, go ahead and update the iDRAC.

  If you are not able to perform this update, you will need to update the lifecycle controller (LCC) or run the "LCC" repair package if necessary.

  Let me know if you need additional assistance.

• Dell Poweredge 2950 Raid battery

  Hello

  I would like to know if I replace the battery Raid for the Dell 2950 poweredge server would be the raid configuration to be indented upward from zero?

  Or should I replace the server should start up as normal without any problems?

  I need to replace the battery raid for a Dell poweredge server 2950 and I would appreciate if someone can answer my question above.

  Thank you.

  No, the RAID array does NOT affect the configuration.

• DELL PowerEdge T710 support for 2012 Windows

  Hello

  I was reading this document on the support Windows 2012:

  http://en.community.Dell.com/TechCenter/OS-applications/w/wiki/4149.Dell-PowerEdge-server-support-for-Windows-Server-2012-and-its-features.aspx

  If I understand correctly T710 is supported for the installation of Windows 2012 as:

  Support Dell - qualified.

  And 'X' means that the long-term 2012 Windows: error memory consumed, Collaborative processor performance counters, logic processor idling, compatible device name are not supported on this server. Only SR-IOV future is supported?

  Thank you

  That is right.  Consumed memory error, the processor performance counters Collaborative, idling logical processor and compatible device Naming are only available on generation servers 12.   Server 2012 will take place on the T710.

  Kind regards

• Dell Poweredge 2850 and ESXi 4.1

  I have a Dell PowerEdge 2850 with 12 GB of RAM and two CPUs, hyperthreading with 350 GB of disk space.

  This box was initially installed with Redhat Linux ES 5.4 64-bit and OS 64 bit CentOS 5.5 with no problems, so I know the processor supports 64-bit.

  I then installed VMWare ESXi version 4.1 on the Dell Poweredge 2850 with no problems.

  Then, I created a few instances VM I want to install CentOS 5.5 64 bit.  During the installation of a VMware instance, I get this:

  msg.cpuid.notLongmodeQuestionFmt:This veritual is configured for 64-bit operating systems.
  However, the 64-bit mode is not possible.
  Longmode is disabled for this virtual machine.
  For more information, see http://VMware.com/info?id=152
  Continue without 64 bit support?

  Now the question I have is this: given that VMWare is problems with 64-bit OSes comments, how is it that I can install CentOS 5.5 64 bit on this Dell PowerEdge 2850 with no problems.  It seems obvious to me that the PowerEdge 2850 works well with the 64 bit OS but not ESXi 4.1.

  How can I get around this?

  Comments?  Thanks in advance.

  The dell series 8 (1850/2850) have no vt support, so not support 64-bit virtual machine, except 6850.

  The output of the processor shows the same thing, or rather, what he shows no vt in its ability.  It shows lm, long mode, so you can run 64-bit, that you are running ESX, but to succeed in this 64-bit support, you need the lm, you and vt, which you don't have.

  -KjB

• Dell powerEdge t420, server windows 2008 R2, RAID5, partitioning problem

  Hello

  [Dell powerEdge t420, windows 2008 R2, RAID5 Server]

  I have attached the picture of disk management.

  There are

  1 extended partition in which it is

  1 NTFS logical volume that completely fill the extended partition.

  But there is a small green free space 0 MB.

  Is this normal?

  Thanks for the info. I have install.

  I reinstalled the operating system

  and in OS partitioning step installation

  There were:

  a 1 Mb extended partition, then the logical partition.

  I deleted all and create 2 primary partition (1 for the Os) and 1 for DATA.

  I solved it.

  But I don't know if

  is the best performing primary or logical partition.

• [Solved] Dell PowerEdge R720: Error when will United Nations datastore in VMware ESXI 5.1.0 [SD]

  Buonasera,
  HO a Dell PowerEdge R720 fuori co, build 799733, non riesco ad add a datastore not found da dipped 1.8 to.
  Durante FICS 'add a storage' seleziono disk/Lun, VMFS5, per poi was "Current Disposition of the disc" al, nella casella vedo the con dei locali brain table a couple of partizioni di default.
  Dopo few minuto di attesa mostra una finestra in cui VSphere loses the e outdo if sta tentando di ricollegare.
  Can I try a ricollegarmi senza esito, dopo some UNAMET outdo e di nuovo attiva

  This is the che viene say error:
  Call "HostDatastoreSystem.QueryVmfsDatastoreCreateOptions" of object "ha-datastoresystem" on ESXi '10.2.99.36' failed.

  He guardando Dell Disco local delle partizioni noto:
  1 XXX DatastoresAndVolumnes.PartitionType.0xde not found...
  2 Win95 FAT32 LBA 2.00 GB

  No Yes di cosa is... If my alla fine ho need understand di causa e come lo spazio image Add.
  Allégo ibm_db del disco inquisito: naa.6848f690edfa310018e37ce915ef3fcf

  Come posso lo senza riavviare storage server add it?
  The partizioni in questioned are best-known boot di durante FICS? Oppure posso eliminarle?
  CI sono dei comandi specifici per creare he vmfs volume?

  Grazie in pre-empted by it vostro aiuto

  Salve,

  No we can aiutarla a software level. It forum dedicated to e a soli problemi hardware.

  If dovra rivolgere o al supporto Vmware o a terze aziende.

  Speaking saluti

• Ordine brain DELL POWEREDGE R720 - disco rotto

  Buonasera,

  I wanted to get one offer by the di UN SAS price disco da 7.2 krpm 1 TB 2.5 "by server of he DELL POWEREDGE R720 nostro.

  Grazie.

  Saluti,

  Buongiorno,

  Può acquistare disco it a questo link

  Accessories.euro.Dell.com/.../Category.aspx

  Marco

• Brain price DELL POWEREDGE R720

  Buonasera,

  Vorremmo ricevere quotazione by disco of the di UN SAS 1 TB 7.2krpm formato 2.5 "price.

  He nostro Server e a DELL POWEREDGE R720 (serial number: xxxxxxx).

  Grazie.

  Saluti,

  Buongiorno,

  Può acquistare disco it online a questo link:

  Accessories.euro.Dell.com/.../Category.aspx

  Saluti

• Is it possible to Flash a BIOS SC8000 Compellent to make a Dell Poweredge R720 BIOS?

  Is it possible to Flash a BIOS SC8000 Compellent to make a Dell Poweredge R720 BIOS?

  Similar to the way you can Flash a BIOS NX3000 to make a R710.

  I tried to Flash the BIOS in several different ways, including the BACK update and addition of /forcetype, /brandname and /forceit.

  Any help would be appreciated.

  Hello, tjkc80.

  So, the quick answer is no. You will not be able to do. In the case of NX, it is simply a R710 we have renamed, attached an MD for sold and additional storage in the form of an appliance. You are able to 'rebrand' that the return to a R710 because he was once a R710.

  In the case of the SC8000, there has never been a powerful storage controller. It cannot be "flashed" on a server, because it has never been a server. It is built and designed as a storage controller.

• HP StorageWorks MSL2024 tape library integrate R720 Dell Poweredge

  Hello

  I have a dell Poweredge r720. I want to integrate HP MSL 2024 so I need to install the LSI SAS9212-4i4e interface card.

  Is this compatible with poweredge r720?

  Hello simpleguy3k,

  This is a combo card because if you connect hard drives you can use it as a raid card, or if no drive is directly connected to the card then it can serve as a relay SAS card. Also, I checked the compatibility of the guide & it supports two different tape units. http://www.LSI.com/downloads/public/host%20Bus%20Adapters/host%20Bus%20Adapters%20Common%20Files/LSI_6Gb_SAS_SATA_HBA_Compatibility_List.PDF

  Please let us know if you have any other questions.

• Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode.

  Hi Sir,

  Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode after upgrading the RAM to 64 GB.

  Arrangement of RAM is made 4 our 16 GB of RAM on 2 channels. I get no error message about the RAM configuration. It is booting in safe mode but not start in normal mode, his hanging during windows startup.

  Please give me guide to solve this problem.

  I thank & regards

  Ramanantsoa D

  Thanks for the reply.

  My version of windows is 32-bit Windows server 2003 Enterprise Edition Service Pack 2.

  Although I have not tried switching/EAP, I will try that and get back to you.

  And again something I have an idea of the installation of windows server 2008 R2 Standard version on this server, it will support? Please let me know Chris.

  Thank you.

• Server Tower Dell PowerEdge T110 II

  Hello

  For server Dell PowerEdge T110 II Tower

  If I choose

  Microsoft (r) Windows (r) Server 2008 x 64 R2 SP1 Standard Edition(5CAL), FI, S-Chinese [included in price]

  as the operating system, why then I an error like

  The version of Microsoft Windows Server 2008 R2 SP1Operating system was to have 40 GB or 80 GB maximum hard Drivepartition. To solve the problem, please use the links provided.

  choose which hard drive configuration?

  Kind regards

  Once you go to the section "Installation of boot (to Windows (r) OS only) Partition" and select 40 or 80 GB partition error you are referencing disappears.

  Let us know if you have any other questions.

• Dell PowerEdge 2950 P2V problem

  Physical server:

  Dell PowerEdge 2950

  Windows 2003 R2 Standard x 86 operating system

  Sheet music:

  Dell - hidden partition

  C: BONE

  D: Data1

  E: Data2

  F: Data3

  G: data4

  vSphere ESXi 4.1 (under license)

  ISCSI SAN

  vCenter Server

  I tried on cold hidden server with boot CD, but received the error "unable to determine the operating system invited."  Looks like that I don't have the driver for the Dell raid controller in the boot CD.

  I decided to go with the hot P2V using the plug-in for VirtualCenter.  I stop the SQL server service and disabled the firewall disabled the anti-virus tools.  Only two partitions (C and G) on the physical server must be in the new virtual machine.  So, I've selected partitions C and G and has increased the size of the drive at a time.  I made sure not to install the vmware tools and unchecked the option reconfigures.   The P2V conversion was successful.   But when I went to start the virtual machine, it starts with the 'VMWARE' logo and restarts immediately.  Restart the virtual computer so fast I can't even in the BIOS unless I hit the key several times.   I did the clonning with the hidden partition, but with the same problem.   There are no BSOD or any indication that the virtual machine cannot find the vdisks.   Called in vmware support.  They used webex for an hour, but could not fix.  Asked me to send in the logbundle.

  I HERE it if someone tell me what I am doing wrong?

  Thank you

  Another option is to install the Standalone Converter 3.0.3 on the PowerEdge, stop all services and performing the conversion.

  André